)]}'
{"/PATCHSET_LEVEL":[{"author":{"_account_id":1002363,"name":"Jasper v. B.","email":"jasper@mezzo.de","username":"jazzpi"},"change_message_id":"35c2fd2868e269451d9d86d2f52835891da85e70","unresolved":false,"context_lines":[],"source_content_type":"","patch_set":1,"id":"c9759a73_0c5f787a","updated":"2026-09-30 14:03:09.000000000","message":"Adding you two because you reviewed https://review.openocd.org/c/openocd/+/8719\n\nThis (and the following three commits) is the C implementation of the Python script I used for the FlexNVM partitioning in https://sourceforge.net/p/openocd/tickets/448/.\n\nThis is my first time using Gerrit so I hope I have structured it correctly :)\n\nFull disclaimer: I pointed Claude Opus 5.5 at an OpenOCD checkout and gave it my Python script as well as the S32K reference manual. Most of the changes in the four commits are its work. I did not find any AI contribution guidelines, and `checkpatch.sh` rejected a `Co-authored-by:` trailer, so I did not add any attribution to the commit messages.\n\nI did review all changes extensively and tested them myself on an S32K118. S32K116 should behave identically as far as FlexNVM is concerned. There are some small differences with the S32K14x MCUs, but I don\u0027t have any to test with. Nor do I have any other Kinetis MCUs to check I didn\u0027t break anything, but I verified it against RMs as far as I could.","commit_id":"90c3c12c36e18174ca10fe3d249bddfce18647c1"},{"author":{"_account_id":1002363,"name":"Jasper v. B.","email":"jasper@mezzo.de","username":"jazzpi"},"change_message_id":"e5fa73824fc51d0b678b0b1d780992f4188a8dcd","unresolved":false,"context_lines":[],"source_content_type":"","patch_set":1,"id":"65359f3b_08760f72","in_reply_to":"11eef83d_bf722925","updated":"2026-10-05 12:37:39.000000000","message":"Worked with `Co-authored-by`. It took me a while to figure out the `Co-authored-by` line has to be before the `Change-Id` line.","commit_id":"90c3c12c36e18174ca10fe3d249bddfce18647c1"},{"author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"tomas.vanek.oocd@gmail.com","username":"vanekt"},"change_message_id":"3c5da2a2991eeefb2bfa53ecc43369ba087e37ef","unresolved":true,"context_lines":[],"source_content_type":"","patch_set":1,"id":"11eef83d_bf722925","in_reply_to":"133e6cdd_af2f58fd","updated":"2026-10-01 22:06:48.000000000","message":"\u003e Will do. With a `Co-authored-by: Claude Opus 5.5 \u003cnoreply@anthropic.com\u003e` trailer, or with a `Assisted-by: LLM` trailer?\n\nTry the former first, I hope checkpatch will accept. If not either put actual checkpatch error to Checkpatch-ignore: or use Assisted-by\n\n\u003e And a Gerrit question: I just amend all 4 commits and force push? And then as long as I don\u0027t edit the `Change-Id` it will pick it up as an update to the existing patch set?\n\nYes","commit_id":"90c3c12c36e18174ca10fe3d249bddfce18647c1"},{"author":{"_account_id":1002363,"name":"Jasper v. B.","email":"jasper@mezzo.de","username":"jazzpi"},"change_message_id":"9b31c3fab1cef9b80e6c2d3893b4bbf603d35c7d","unresolved":true,"context_lines":[],"source_content_type":"","patch_set":1,"id":"133e6cdd_af2f58fd","in_reply_to":"1367e882_fc185f0c","updated":"2026-10-01 21:52:46.000000000","message":"Will do. With a `Co-authored-by: Claude Opus 5.5 \u003cnoreply@anthropic.com\u003e` trailer, or with a `Assisted-by: LLM` trailer?\n\nAnd a Gerrit question: I just amend all 4 commits and force push? And then as long as I don\u0027t edit the `Change-Id` it will pick it up as an update to the existing patch set?","commit_id":"90c3c12c36e18174ca10fe3d249bddfce18647c1"},{"author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"tomas.vanek.oocd@gmail.com","username":"vanekt"},"change_message_id":"940f6236e1d3f53c882042638fbd280555e7f967","unresolved":true,"context_lines":[],"source_content_type":"","patch_set":1,"id":"1367e882_fc185f0c","in_reply_to":"c9759a73_0c5f787a","updated":"2026-10-01 21:30:44.000000000","message":"\u003e Full disclaimer: I pointed Claude Opus 5.5 at an OpenOCD checkout and gave it my Python script as well as the S32K reference manual. Most of the changes in the four commits are its work. I did not find any AI contribution guidelines, and `checkpatch.sh` rejected a `Co-authored-by:` trailer, so I did not add any attribution to the commit messages.\n\nWe want to update to the newer checkpatch after the upcoming release. Until then please add `Checkpatch-ignore: BAD_SIGN_OFF`\nSee https://review.openocd.org/c/openocd/+/9870/comment/78e3f41d_7cb65fc6/","commit_id":"90c3c12c36e18174ca10fe3d249bddfce18647c1"}]}