)]}'
{"id":"openocd~master~Ib134edd9e987af2f5f606071521885b17af4d70f","project":"openocd","branch":"master","hashtags":[],"change_id":"Ib134edd9e987af2f5f606071521885b17af4d70f","subject":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.","status":"MERGED","created":"2013-05-28 23:49:29.000000000","updated":"2014-03-07 18:47:29.000000000","submitted":"2014-03-07 18:47:29.000000000","submitter":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"total_comment_count":5,"unresolved_comment_count":0,"has_review_started":true,"meta_rev_id":"4e2e68e46a5a68f786a362d8e0070ae4a8f2db9e","_number":1427,"owner":{"_account_id":1000435,"name":"Chris Johns","email":"chrisj@rtems.org","username":"kiwichris"},"actions":{},"labels":{"Verified":{"approved":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"all":[{"value":0,"_account_id":1000435,"name":"Chris Johns","email":"chrisj@rtems.org","username":"kiwichris"},{"value":0,"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},{"value":0,"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},{"value":0,"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},{"value":1,"date":"2014-03-07 18:47:29.000000000","permitted_voting_range":{"min":1,"max":1},"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]}],"values":{"-1":"Fails"," 0":"No score","+1":"Verified"},"description":"","default_value":0},"Code-Review":{"approved":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"all":[{"value":0,"_account_id":1000435,"name":"Chris Johns","email":"chrisj@rtems.org","username":"kiwichris"},{"value":0,"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},{"value":0,"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},{"value":2,"date":"2014-03-07 18:47:29.000000000","permitted_voting_range":{"min":2,"max":2},"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},{"value":0,"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]}],"values":{"-2":"This shall not be merged","-1":"I would prefer this is not merged as is"," 0":"No score","+1":"Looks good to me, but someone else must approve","+2":"Looks good to me, approved"},"description":"","default_value":0}},"removable_reviewers":[],"reviewers":{"REVIEWER":[{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},{"_account_id":1000435,"name":"Chris Johns","email":"chrisj@rtems.org","username":"kiwichris"},{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"}]},"pending_reviewers":{},"reviewer_updates":[{"updated":"2014-02-05 18:55:48.000000000","updated_by":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"reviewer":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"state":"REVIEWER"},{"updated":"2014-02-05 19:27:48.000000000","updated_by":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"reviewer":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"state":"REVIEWER"},{"updated":"2014-03-04 09:27:56.000000000","updated_by":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"reviewer":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"state":"REVIEWER"},{"updated":"2014-03-07 18:47:29.000000000","updated_by":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"reviewer":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"state":"REVIEWER"}],"messages":[{"id":"762df0d5bbbcd1a9b184931c6590eee6365cc735","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2013-05-28 23:59:13.000000000","message":"Patch Set 1: Verified\n\nBuild Successful \n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit-build/2389/ : SUCCESS\n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit/2938/ : SUCCESS","accounts_in_message":[],"_revision_number":1},{"id":"1eafced90416c2c401f2ff0a861061c581714496","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2013-05-29 02:10:07.000000000","message":"Patch Set 1: (2 inline comments)\n\nI wonder what is the preferred way to add comments to the change itself. When one is using plain e-mail, it\u0027s possible to add some visible text after -- which wouldn\u0027t be part of the commit message while still providing useful info.\n\nIt would be interesting to see the result of your code parsing Zynq tables but i\u0027m afraid that doesn\u0027t belong to the commit message, so it\u0027s unclear where to send it, probably here in the comments. But the comments are \"wikified\" so you\u0027d need to add a leading space to every line to mark it as a preformatted. Sometimes gerrit feels like such a hassle :/","accounts_in_message":[],"_revision_number":1},{"id":"04ffdb89f7c0ce56e6e78ef5e68df22f8e9139e4","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2013-05-29 03:59:07.000000000","message":"Patch Set 1: (1 inline comment)\n\n","accounts_in_message":[],"_revision_number":1},{"id":"89e7182b173a5b8e724bff230dda2d33181553b8","author":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"real_author":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"date":"2013-06-03 22:25:22.000000000","message":"Patch Set 1: (1 inline comment)\n\n","accounts_in_message":[],"_revision_number":1},{"id":"1997beff22d183fedc553acef1614068f2ffdc21","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2013-07-22 15:41:53.000000000","message":"Uploaded patch set 2.","accounts_in_message":[],"_revision_number":2},{"id":"834fe7db71b4280bdb4d4f8302d3d1668c863c0a","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2013-07-22 15:52:45.000000000","message":"Patch Set 2: Verified\n\nBuild Successful \n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit/3168/ : SUCCESS\n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit-build/2618/ : SUCCESS","accounts_in_message":[],"_revision_number":2},{"id":"2702e104f0a5008fc31b1e1549189d3f884cf10b","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2013-09-23 13:37:17.000000000","message":"Patch Set 2: I would prefer that you didn\u0027t submit this\n\nthis patch, with reviewer comments fixed, has been submitted as a new patch","accounts_in_message":[],"_revision_number":2},{"id":"8f7c21982b6a8d56305e91d824fb7ced8b2cac41","author":{"_account_id":1000435,"name":"Chris Johns","email":"chrisj@rtems.org","username":"kiwichris"},"real_author":{"_account_id":1000435,"name":"Chris Johns","email":"chrisj@rtems.org","username":"kiwichris"},"date":"2013-09-23 19:25:45.000000000","message":"Patch Set 2:\n\nThat is fine with me if your changes provide the nesting functionality.","accounts_in_message":[],"_revision_number":2},{"id":"172cb2790ca6c09cf1f1bee8b9e862b7aa20cd3e","author":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"real_author":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"date":"2014-01-18 12:11:55.000000000","message":"Patch Set 2:\n\nCan someone fix the few things remaining from patch 1 comments so we can submit this?","accounts_in_message":[],"_revision_number":2},{"id":"1d656a7800a17e733f010a24c6fd15730586647a","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-01-27 06:16:31.000000000","message":"Uploaded patch set 3.","accounts_in_message":[],"_revision_number":3},{"id":"af6566ca6e2917af2ad9a1e6c3510f1883c4288f","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2014-01-27 06:30:08.000000000","message":"Patch Set 3: Verified+1\n\nBuild Successful \n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit/3883/ : SUCCESS\n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit-build/3329/ : SUCCESS","accounts_in_message":[],"_revision_number":3},{"id":"230ca6ad5824b29fb87b31afb1c16d7f98b495be","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-01-27 14:11:46.000000000","message":"Patch Set 3: Code-Review+1\n\nPatch set 3 should address concerns by all reviewers.  Per discussions in the 1518 patch, no change has been made around line 1377.  Patch will work as-is due to 8 bit data packaged in a 32 bit field.  I will submit 1518 separately, as suggested by Andreas.","accounts_in_message":[],"_revision_number":3},{"id":"48e97ca19dc7075d17ecc71161a7e192e1b6add0","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-01-30 15:00:10.000000000","message":"Uploaded patch set 4.","accounts_in_message":[],"_revision_number":4},{"id":"0e440eac38ba75bc1d8141d4e6aa0914ac17c272","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2014-01-30 15:13:18.000000000","message":"Patch Set 4: Verified+1\n\nBuild Successful \n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit/3903/ : SUCCESS\n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit-build/3349/ : SUCCESS","accounts_in_message":[],"_revision_number":4},{"id":"e4bed2571cd7cc4053deb969eb590bb48dfb1fea","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-02 17:11:22.000000000","message":"Uploaded patch set 5.","accounts_in_message":[],"_revision_number":5},{"id":"28ba20296f870df868e17508dec0552f6b62a3f4","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-02 17:16:11.000000000","message":"Patch Set 5:\n\nBrad, do you think this helps?","accounts_in_message":[],"_revision_number":5},{"id":"a770f833c105d46f7e73c068fcf3ef3ec83b1601","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2014-02-02 17:25:21.000000000","message":"Patch Set 5: Verified+1\n\nBuild Successful \n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit/3916/ : SUCCESS\n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit-build/3362/ : SUCCESS","accounts_in_message":[],"_revision_number":5},{"id":"5d6e9e3e7476ac89fc8e8a326145d0056c3144d3","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-03 15:00:42.000000000","message":"Patch Set 5:\n\nPaul, the last patch basically changes the listing format such that the sub-tables are denoted by an [Lxx] (where xx is a level from 1 to 16] instead of indenting.  To some extent, it is a preference thing.  I have two justifications:\n\n1.  Indenting eventually causes the text to wrap, causing annoying and hard to read lines.\n2.  The user of the listing really doesn\u0027t care whether a table entry came from the primary table or a sub-table (unless something is broken).  This change just makes the sub-table indicator a little more subtle.","accounts_in_message":[],"_revision_number":5},{"id":"463a610b83241a0f403903f8218f63979aec2e0f","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-03 15:16:58.000000000","message":"Patch Set 5:\n\nBrad, I\u0027ve just taken the code you pushed on Jan 30th and added a check that allows to continue with the other parts of the table even when a turned-off core is present and you say you had issues with that, I think I didn\u0027t change anything else, compare your last code to the one I pushed please. I\u0027d also appreciate you testing my other patch that should set \"dbgbase\" for the cores automatically: can you please boot your board fully (so that all the cores are on), then run openocd with http://openocd.zylin.com/1920 and without \"dbgbase\" in the config file and see if it figured it out correctly automatically?","accounts_in_message":[],"_revision_number":5},{"id":"cafa65c16636fe51fcec23fecdd931a9a484f361","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-03 15:18:08.000000000","message":"Patch Set 5:\n\nThat said, I\u0027m fine with the subtable indication you\u0027re proposing, but where that code is at? I\u0027m ready to rebase my changes on top of it.","accounts_in_message":[],"_revision_number":5},{"id":"b6bbe984c42a94507f7fcd64f886c49c8824e1a1","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-03 15:40:08.000000000","message":"Patch Set 5:\n\nHi Paul, patch set 5, pushed on Feb 2nd, should have the functionality as described.","accounts_in_message":[],"_revision_number":5},{"id":"9b50695eb8fa21ef85f59875346fced88e38537f","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-03 15:44:04.000000000","message":"Patch Set 5:\n\nOops, sorry.  I got mixed up between my push and your\u0027s.  The Jan 30th patch already has all my changes.  I will check yours on real hardware as soon as I can clear my workbench again.  It might be tomorrow before that happens.","accounts_in_message":[],"_revision_number":5},{"id":"03b4495af7facbaa1829182f40c36da109cc60f8","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-03 16:02:44.000000000","message":"Patch Set 5:\n\nPatchset 4, pushed by you on Jan 30th seems to be using tabs, not [Lxx] indication. Is it really the one we should review and work upon? Also, do you need anything extra from me to verify dbgbase autodetection with my other patch?","accounts_in_message":[],"_revision_number":5},{"id":"3048173bc9c9f85bb88596a4eff11a2913986f82","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-03 16:17:18.000000000","message":"Patch Set 5:\n\nOK, I\u0027ll recheck.  I\u0027ve had some problems getting my pushes to work right.  Gerrit newbie issues.","accounts_in_message":[],"_revision_number":5},{"id":"18359cadf181dc4ff973639b25058c47956ef908","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-04 05:08:04.000000000","message":"Patch Set 5:\n\nPaul, could you send me the set of git commands that you used to get your patch to fall on top of this one? I am really missing something in the process, and the result is making a mess of things.  I don\u0027t want to do another push until I\u0027m sure I have it right.  My patch sets don\u0027t appear on the web interface even though a \"git log -p --reverse origin/master...HEAD\" seems to show them.\n\nThanks for your help. . .","accounts_in_message":[],"_revision_number":5},{"id":"2f7750466aa28b710444340055479d9d33691a74","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-04 06:11:41.000000000","message":"Patch Set 5:\n\nSure, here\u0027s what I did:\n\ngit fetch ssh://pfertser@openocd.zylin.com:29418/openocd refs/changes/27/1427/4\n\nThat got me your Jan 30 patch downloaded. Then since I wanted to change only the patch itself (and not rebase it and not do any other complicated thing) I went to a \"detached HEAD\" mode with \"git checkout FETCH_HEAD\" (i.e. switched to your patch without creating a branch for it). Then I changed the file (added the checks) and did \"git add src/target/arm_adi_v5.c\", then \"git commit --amend\". Changed the description a bit, saved the result, and then \"git push review\". That\u0027s it.","accounts_in_message":[],"_revision_number":5},{"id":"755b6366a554e189c69a87dc9c11130319ba33d2","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-04 15:16:18.000000000","message":"Patch Set 5:\n\nThanks Paul.  Are you using ssh or http?  The trouble seemed to start when I switched from ssh to http, due to firewall lockout issues.  It looks to me like patchset 4 has no actual changes. Do you see that on your end?","accounts_in_message":[],"_revision_number":5},{"id":"0f312d4840d3b9faf8a6d6561552c53d30ba99c1","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-04 15:41:33.000000000","message":"Patch Set 4:\n\nYes, 3 and 4 are exactly the same, you pushed both :)","accounts_in_message":[],"_revision_number":4},{"id":"452e884adb3a708457ca4972f3de1a0c3d900ff9","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-05 10:44:24.000000000","message":"Uploaded patch set 6.","accounts_in_message":[],"_revision_number":6},{"id":"26b5eda9707554533fe74575a1468b611344eebd","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-05 10:48:51.000000000","message":"Patch Set 5:\n\nBrad, I think this patch should look like this. I\u0027ve taken into account all the comments, cleaned up casts (removed whitespaces after the closing paren) and assumed operations like \u00260xff always return an int (0xff will always fit an int, and any operation is guaranteed to return at least an int). I\u0027ve also left that additional check for turned off cores in place.\n\nThis was build-tested with gcc and clang 3.3.\n\nPlease check on your hardware. It\u0027s using Chris\u0027s tab-indenting method but I will rebase your 1518 (with Lxx) on top of this shortly so we can decide what output looks more appropriate.","accounts_in_message":[],"_revision_number":5},{"id":"9e0b30f4ca32d6ec06c5dba2fce3573641608bf1","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2014-02-05 10:57:19.000000000","message":"Patch Set 6: Verified+1\n\nBuild Successful \n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit/3938/ : SUCCESS\n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit-build/3383/ : SUCCESS","accounts_in_message":[],"_revision_number":6},{"id":"037490c92e048dafe20362f92900bf0b592adc33","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-05 18:55:48.000000000","message":"Patch Set 6:\n\nHi Paul,  here\u0027s the output from your latest change.  I might suggest omitting the tabs on the error message, since it looks out of place among all the timeout messages that have no tabs.  Otherwise, looks good.\nI wish there was a good way to recover from the sticky errors.  The only sure way that I\u0027ve found is to reset the jtag connection, which means you have to completely start over with the debugging session.\n\n\t\tROMTABLE[0x8] \u003d 0x3003\nTimeout (1000ms) waiting for ACK\u003dOK/FAULT in JTAG-DP transaction - aborting\n\t\t\tCan\u0027t read component with base address 0x82152000, the corresponding core might be turned off\nJTAG-DP OVERRUN - check clock, memaccess, or reduce jtag speed\nMEM_AP_CSW 0x800000c2, MEM_AP_TAR 0x82152fe0\nJTAG-DP STICKY ERROR","accounts_in_message":[],"_revision_number":6},{"id":"b8b4586d1be9a19a412e74549d338ad5cf46ec84","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-05 18:57:28.000000000","message":"Patch Set 6:\n\nI think I\u0027ve figured out where my pushes are going wrong.  I should be submitting those changes soon.","accounts_in_message":[],"_revision_number":6},{"id":"b780b959d261819d424a953d388c9798c145e2ed","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-05 19:27:48.000000000","message":"Patch Set 6:\n\nHm, sticky errors :/ There goes my \"cool plan\". Thanks for testing.\n\nAnyway, what are you going to push, don\u0027t you think I\u0027ve made all the required changes already?","accounts_in_message":[],"_revision_number":6},{"id":"1f213de220e8314e8d1a2f37c8d12fc4c1b88c86","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-05 21:26:27.000000000","message":"Patch Set 6:\n\nHi Paul, I don\u0027t think my indentation change is in yet is it?  At least my build is still using tab indentation.\n\nI think your change is still better than before.  It barfs out a bunch of errors, but at least the user has an idea on what to do next.","accounts_in_message":[],"_revision_number":6},{"id":"b072e9dd44edc71ec2f1cc06c962b394a009975d","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-05 21:34:54.000000000","message":"Patch Set 6:\n\nYour indentation change is there: http://openocd.zylin.com/#/c/1518 and it should be a separate patch, this one we\u0027re discussing should have tabs as it does now.","accounts_in_message":[],"_revision_number":6},{"id":"e92bed8361e1ba1d79326be4847598499d697889","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-05 21:56:30.000000000","message":"Patch Set 6:\n\nI was thinking of abandoning the 1581 change and rolling those changes into this one. But I can go either way on that topic.  Are we done with this change then?","accounts_in_message":[],"_revision_number":6},{"id":"ae74910b2014d4df6b0c6d2a555d201b6a90d53b","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-02-05 22:01:19.000000000","message":"Patch Set 6:\n\nI suppose I\u0027ll handle this change from now on. So its pending Andreas\u0027s re-review then.\n\nSo, after you get JTAG errors it doesn\u0027t recover ever, you basically need to reset the chip to get access back, right?","accounts_in_message":[],"_revision_number":6},{"id":"4d6304f27f48f6600a27c423f5ffc19abaf55dc5","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-05 22:12:28.000000000","message":"Patch Set 6:\n\nYep, the only way I know to regain access is to reset the chip.  I think it might be only necessary to reset the JTAG controller, but I haven\u0027t tested that theory.","accounts_in_message":[],"_revision_number":6},{"id":"1a4782cffdba9abc07c8bba8f6555f45c48eb4e7","author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"real_author":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"date":"2014-02-13 14:17:57.000000000","message":"Patch Set 6: Code-Review+1\n\nLooks good to me","accounts_in_message":[],"_revision_number":6},{"id":"c0b848a5c25b941d61f65d0e62c676bd04d7907e","author":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"real_author":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"date":"2014-03-03 22:00:52.000000000","message":"Patch Set 6:\n\n(1 comment)\n\nOther than the typo it looks good","accounts_in_message":[],"_revision_number":6},{"id":"5b33aa3e06a7fe12aee2046c3ea43e10e7f0e7db","author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"real_author":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"date":"2014-03-04 09:14:27.000000000","message":"Uploaded patch set 7.","accounts_in_message":[],"_revision_number":7},{"id":"a4bbed6bd34f2c9ad027f430ac757dd7434c9a92","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2014-03-04 09:27:56.000000000","message":"Patch Set 7: Verified+1\n\nBuild Successful \n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit-build/3538/ : SUCCESS\n\nhttp://openocd.zylin.com/jenkins/job/openocd-gerrit/4098/ : SUCCESS","accounts_in_message":[],"_revision_number":7},{"id":"88ebbf1677fd1b980c28f120931d186dca791c8b","author":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"real_author":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"date":"2014-03-07 13:50:09.000000000","message":"Patch Set 7: Code-Review+2","accounts_in_message":[],"_revision_number":7},{"id":"4e2e68e46a5a68f786a362d8e0070ae4a8f2db9e","author":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"real_author":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"date":"2014-03-07 18:47:29.000000000","message":"Change has been successfully cherry-picked as 623eb336cfa4d3e43057e0ed20ab643bc7845fa1","accounts_in_message":[],"_revision_number":8}],"current_revision":"623eb336cfa4d3e43057e0ed20ab643bc7845fa1","revisions":{"91fed5154dfe838effd328dc1093a7bd987ec69a":{"kind":"REWORK","_number":7,"created":"2014-03-04 09:14:27.000000000","uploader":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"ref":"refs/changes/27/1427/7","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/27/1427/7","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/7 \u0026\u0026 git checkout -b change-1427 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/7 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/7 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/7 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/27/1427/7","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/7 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"ebb71eb291a85b9d6de148461edb575e4e79745f","subject":"cfg: LPC17xx default to using SYSRESETREQ to reset target"}],"author":{"name":"Chris Johns","email":"chrisj@rtems.org","date":"2013-05-28 23:47:34.000000000","tz":600},"committer":{"name":"Paul Fertser","email":"fercerpav@gmail.com","date":"2014-03-04 09:14:03.000000000","tz":240},"subject":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.","message":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.\n\nMove the ROM table printing into a separate function to allow\nrecursive calls with nested tables. ROM tables can nest. The\nprinting is limited to 16 levels.\n\nUpdate the types of tables printed. When an entry can\u0027t be read, print\na warning and continue.\n\nChange-Id: Ib134edd9e987af2f5f606071521885b17af4d70f\nSigned-off-by: Chris Johns \u003cchrisj@rtems.org\u003e\n"}},"ffba2c1e607eba055ecd63da39d86a9dfb5a3568":{"kind":"REWORK","_number":6,"created":"2014-02-05 10:44:24.000000000","uploader":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"ref":"refs/changes/27/1427/6","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/27/1427/6","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/6 \u0026\u0026 git checkout -b change-1427 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/6 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/6 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/6 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/27/1427/6","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/6 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"ebb71eb291a85b9d6de148461edb575e4e79745f","subject":"cfg: LPC17xx default to using SYSRESETREQ to reset target"}],"author":{"name":"Chris Johns","email":"chrisj@rtems.org","date":"2013-05-28 23:47:34.000000000","tz":600},"committer":{"name":"Paul Fertser","email":"fercerpav@gmail.com","date":"2014-02-05 10:43:20.000000000","tz":240},"subject":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.","message":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.\n\nMove the ROM table printing into a separate function to allow\nrecursive calls with nested tables. ROM tables can nest. The\nprinting is limited to 16 levels.\n\nUpdate the types of tables printed. When an entry can\u0027t be read, print\na warning and continue.\n\nChange-Id: Ib134edd9e987af2f5f606071521885b17af4d70f\nSigned-off-by: Chris Johns \u003cchrisj@rtems.org\u003e\n"}},"82cc3f3c3c6041fa4bcb9d56ebd8bb336c3e2dd6":{"kind":"REWORK","_number":5,"created":"2014-02-02 17:11:22.000000000","uploader":{"_account_id":1000160,"name":"Paul Fertser","email":"fercerpav@gmail.com","username":"pfertser"},"ref":"refs/changes/27/1427/5","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/27/1427/5","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/5 \u0026\u0026 git checkout -b change-1427 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/5 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/5 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/5 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/27/1427/5","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/5 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"ebb71eb291a85b9d6de148461edb575e4e79745f","subject":"cfg: LPC17xx default to using SYSRESETREQ to reset target"}],"author":{"name":"Chris Johns","email":"chrisj@rtems.org","date":"2013-05-28 23:47:34.000000000","tz":600},"committer":{"name":"Paul Fertser","email":"fercerpav@gmail.com","date":"2014-02-02 17:09:44.000000000","tz":240},"subject":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.","message":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.\n\nMove the ROM table printing into a separate function to allow\nrecursive calls with nested tables. ROM tables can nest. The\nprinting is limited to 16 levels.\n\nUpdate the types of tables printed. When an entry can\u0027t be read, print\na warning and continue.\n\nChange-Id: Ib134edd9e987af2f5f606071521885b17af4d70f\nSigned-off-by: Chris Johns \u003cchrisj@rtems.org\u003e\n"}},"e71fe2fa27892692004694bf3b4ea115aa11db1e":{"kind":"TRIVIAL_REBASE","_number":4,"created":"2014-01-30 15:00:10.000000000","uploader":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"ref":"refs/changes/27/1427/4","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/27/1427/4","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/4 \u0026\u0026 git checkout -b change-1427 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/4 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/4 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/4 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/27/1427/4","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/4 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"ebb71eb291a85b9d6de148461edb575e4e79745f","subject":"cfg: LPC17xx default to using SYSRESETREQ to reset target"}],"author":{"name":"Chris Johns","email":"chrisj@rtems.org","date":"2013-05-28 23:47:34.000000000","tz":600},"committer":{"name":"Brad Riensche","email":"brad.riensche@gmail.com","date":"2014-01-30 14:58:47.000000000","tz":-360},"subject":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.","message":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.\n\nMove the ROM table printing into a separate function to allow\nrecursive calls with nested tables. ROM tables can nest. The\nprinting is limited to 16 levels.\n\nUpdate the types of tables printed.\n\nChange-Id: Ib134edd9e987af2f5f606071521885b17af4d70f\nSigned-off-by: Chris Johns \u003cchrisj@rtems.org\u003e\n"}},"6d836f6a61f2d0fddbae4e00517c696bb442b9bf":{"kind":"TRIVIAL_REBASE","_number":3,"created":"2014-01-27 06:16:31.000000000","uploader":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"ref":"refs/changes/27/1427/3","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/27/1427/3","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/3 \u0026\u0026 git checkout -b change-1427 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/3 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/3 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/3 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/27/1427/3","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/3 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"1137eaedaf6498f3448cdedf6f93076d9b3fd58a","subject":"arm920t: fix write memory operations with caches enabled"}],"author":{"name":"Chris Johns","email":"chrisj@rtems.org","date":"2013-05-28 23:47:34.000000000","tz":600},"committer":{"name":"Brad Riensche","email":"brad.riensche@gmail.com","date":"2014-01-27 05:59:31.000000000","tz":-360},"subject":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.","message":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.\n\nMove the ROM table printing into a separate function to allow\nrecursive calls with nested tables. ROM tables can nest. The\nprinting is limited to 16 levels.\n\nUpdate the types of tables printed.\n\nChange-Id: Ib134edd9e987af2f5f606071521885b17af4d70f\nSigned-off-by: Chris Johns \u003cchrisj@rtems.org\u003e\n"}},"bcf7db719bd80adc57226dcd5c2f5a8278d684e6":{"kind":"TRIVIAL_REBASE","_number":2,"created":"2013-07-22 15:41:53.000000000","uploader":{"_account_id":1000450,"name":"Brad Riensche","email":"brad.riensche@gmail.com","username":"briensche"},"ref":"refs/changes/27/1427/2","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/27/1427/2","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/2 \u0026\u0026 git checkout -b change-1427 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/2 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/2 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/2 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/27/1427/2","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/2 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"c658229f92612a7c3862b2e9ba1a8d6496a8be8a","subject":"target: fix halt and wait_halt timeout units"}],"author":{"name":"Chris Johns","email":"chrisj@rtems.org","date":"2013-05-28 23:47:34.000000000","tz":600},"committer":{"name":"Brad Riensche","email":"brad.riensche@gmail.com","date":"2013-07-22 15:37:16.000000000","tz":-300},"subject":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.","message":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.\n\nMove the ROM table printing into a separate function to allow\nrecursive calls with nested tables. ROM tables can nest. The\nprinting is limited to 16 levels.\n\nUpdate the types of tables printed.\n\nChange-Id: Ib134edd9e987af2f5f606071521885b17af4d70f\nSigned-off-by: Chris Johns \u003cchrisj@rtems.org\u003e\n"}},"52e297b0fa862e8af45bff22dfde4d5e84b5dc3b":{"kind":"REWORK","_number":1,"created":"2013-05-28 23:49:29.000000000","uploader":{"_account_id":1000435,"name":"Chris Johns","email":"chrisj@rtems.org","username":"kiwichris"},"ref":"refs/changes/27/1427/1","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/27/1427/1","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/1 \u0026\u0026 git checkout -b change-1427 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/1 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/1 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/1 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/27/1427/1","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/1 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"2aada5b8d9869ebc69984223710253ba905d61cd","subject":"targets: fix target_type name for Cortex-A targets"}],"author":{"name":"Chris Johns","email":"chrisj@rtems.org","date":"2013-05-28 23:47:34.000000000","tz":600},"committer":{"name":"Chris Johns","email":"chrisj@rtems.org","date":"2013-05-28 23:47:34.000000000","tz":600},"subject":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.","message":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.\n\nMove the ROM table printing into a separate function to allow\nrecursive calls with nested tables. ROM tables can nest. The\nprinting is limited to 16 levels.\n\nUpdate the types of tables printed.\n\nChange-Id: Ib134edd9e987af2f5f606071521885b17af4d70f\nSigned-off-by: Chris Johns \u003cchrisj@rtems.org\u003e\n"}},"623eb336cfa4d3e43057e0ed20ab643bc7845fa1":{"kind":"REWORK","_number":8,"created":"2014-03-07 18:47:29.000000000","uploader":{"_account_id":1000005,"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","username":"Nattgris"},"ref":"refs/changes/27/1427/8","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/27/1427/8","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/8 \u0026\u0026 git checkout -b change-1427 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/8 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/8 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/8 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/27/1427/8","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/27/1427/8 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"e3bb6d390c6e55daa24592ec168fdd114c035c9f","subject":"Rename and sort udev rules file"}],"author":{"name":"Chris Johns","email":"chrisj@rtems.org","date":"2013-05-28 23:47:34.000000000","tz":600},"committer":{"name":"Andreas Fritiofson","email":"andreas.fritiofson@gmail.com","date":"2014-03-07 18:47:29.000000000","tz":0},"subject":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.","message":"targets: Print nested ROM tables with the \u0027dap info\u0027 command.\n\nMove the ROM table printing into a separate function to allow\nrecursive calls with nested tables. ROM tables can nest. The\nprinting is limited to 16 levels.\n\nUpdate the types of tables printed. When an entry can\u0027t be read, print\na warning and continue.\n\nChange-Id: Ib134edd9e987af2f5f606071521885b17af4d70f\nSigned-off-by: Chris Johns \u003cchrisj@rtems.org\u003e\nReviewed-on: http://openocd.zylin.com/1427\nTested-by: jenkins\nReviewed-by: Andreas Fritiofson \u003candreas.fritiofson@gmail.com\u003e\n"}}},"requirements":[],"submit_records":[],"submit_requirements":[]}
