)]}'
{"doc/openocd.texi":[{"author":{"_account_id":1000863,"name":"Tarek BOCHKATI","email":"tarek.bouchkati@gmail.com","username":"BouchkatiTarek"},"change_message_id":"601c0f003d973fb5ab5b8987604522ad70ee788f","unresolved":true,"context_lines":[{"line_number":2369,"context_line":""},{"line_number":2370,"context_line":"@deffn {Config Command} {adapter serial} serial_string"},{"line_number":2371,"context_line":"Specifies the @var{serial_string} of the adapter to use."},{"line_number":2372,"context_line":"If this command is not specified, serial strings are not considered."},{"line_number":2373,"context_line":"No adapter uses this command, so far."},{"line_number":2374,"context_line":"The following adapters have their own command to specify the serial string:"},{"line_number":2375,"context_line":"cmsis_dap, ft232r, ftdi, hla, jlink, kitprog, presto, st-link, vsllink, xds110."}],"source_content_type":"text/x-texinfo","patch_set":1,"id":"3c70a57e_eb87215a","line":2372,"range":{"start_line":2372,"start_character":57,"end_line":2372,"end_character":67},"updated":"2021-11-03 16:16:51.000000000","message":"maybe \"checked\" is better ?","commit_id":"405ed9a10b92e4b7378e699251b4b3dbcb93921e"},{"author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"change_message_id":"43ed4a37124c04fb7eb9388b0faabb453468bc04","unresolved":false,"context_lines":[{"line_number":2369,"context_line":""},{"line_number":2370,"context_line":"@deffn {Config Command} {adapter serial} serial_string"},{"line_number":2371,"context_line":"Specifies the @var{serial_string} of the adapter to use."},{"line_number":2372,"context_line":"If this command is not specified, serial strings are not considered."},{"line_number":2373,"context_line":"No adapter uses this command, so far."},{"line_number":2374,"context_line":"The following adapters have their own command to specify the serial string:"},{"line_number":2375,"context_line":"cmsis_dap, ft232r, ftdi, hla, jlink, kitprog, presto, st-link, vsllink, xds110."}],"source_content_type":"text/x-texinfo","patch_set":1,"id":"5c63d601_f3321f12","line":2372,"range":{"start_line":2372,"start_character":57,"end_line":2372,"end_character":67},"in_reply_to":"3c70a57e_eb87215a","updated":"2021-11-03 16:47:31.000000000","message":"Agree, but I will not change it here otherwise all the series has to be rebased. I will send an extra patch on top of this series","commit_id":"405ed9a10b92e4b7378e699251b4b3dbcb93921e"},{"author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"change_message_id":"30c598c17229d23c65680e5cfb30010320701520","unresolved":false,"context_lines":[{"line_number":2369,"context_line":""},{"line_number":2370,"context_line":"@deffn {Config Command} {adapter serial} serial_string"},{"line_number":2371,"context_line":"Specifies the @var{serial_string} of the adapter to use."},{"line_number":2372,"context_line":"If this command is not specified, serial strings are not considered."},{"line_number":2373,"context_line":"No adapter uses this command, so far."},{"line_number":2374,"context_line":"The following adapters have their own command to specify the serial string:"},{"line_number":2375,"context_line":"cmsis_dap, ft232r, ftdi, hla, jlink, kitprog, presto, st-link, vsllink, xds110."}],"source_content_type":"text/x-texinfo","patch_set":1,"id":"b5bc2dd8_3851439b","line":2372,"range":{"start_line":2372,"start_character":57,"end_line":2372,"end_character":67},"in_reply_to":"5c63d601_f3321f12","updated":"2021-11-21 21:42:01.000000000","message":"Done","commit_id":"405ed9a10b92e4b7378e699251b4b3dbcb93921e"},{"author":{"_account_id":1000863,"name":"Tarek BOCHKATI","email":"tarek.bouchkati@gmail.com","username":"BouchkatiTarek"},"change_message_id":"601c0f003d973fb5ab5b8987604522ad70ee788f","unresolved":true,"context_lines":[{"line_number":2375,"context_line":"cmsis_dap, ft232r, ftdi, hla, jlink, kitprog, presto, st-link, vsllink, xds110."},{"line_number":2376,"context_line":"@end deffn"},{"line_number":2377,"context_line":""},{"line_number":2378,"context_line":"@section Interface Drivers"},{"line_number":2379,"context_line":""},{"line_number":2380,"context_line":"Each of the interface drivers listed here must be explicitly"},{"line_number":2381,"context_line":"enabled when OpenOCD is configured, in order to be made"}],"source_content_type":"text/x-texinfo","patch_set":1,"id":"402e36c8_18c8535e","line":2378,"range":{"start_line":2378,"start_character":9,"end_line":2378,"end_character":19},"updated":"2021-11-03 16:16:51.000000000","message":"I think later this should be changed to Adapter ...","commit_id":"405ed9a10b92e4b7378e699251b4b3dbcb93921e"},{"author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"change_message_id":"43ed4a37124c04fb7eb9388b0faabb453468bc04","unresolved":false,"context_lines":[{"line_number":2375,"context_line":"cmsis_dap, ft232r, ftdi, hla, jlink, kitprog, presto, st-link, vsllink, xds110."},{"line_number":2376,"context_line":"@end deffn"},{"line_number":2377,"context_line":""},{"line_number":2378,"context_line":"@section Interface Drivers"},{"line_number":2379,"context_line":""},{"line_number":2380,"context_line":"Each of the interface drivers listed here must be explicitly"},{"line_number":2381,"context_line":"enabled when OpenOCD is configured, in order to be made"}],"source_content_type":"text/x-texinfo","patch_set":1,"id":"d885cc98_06abe69a","line":2378,"range":{"start_line":2378,"start_character":9,"end_line":2378,"end_character":19},"in_reply_to":"402e36c8_18c8535e","updated":"2021-11-03 16:47:31.000000000","message":"Yes, \"interface\" is still used everywhere, also in the code and in the name of the files.","commit_id":"405ed9a10b92e4b7378e699251b4b3dbcb93921e"}],"src/jtag/adapter.h":[{"author":{"_account_id":1000863,"name":"Tarek BOCHKATI","email":"tarek.bouchkati@gmail.com","username":"BouchkatiTarek"},"change_message_id":"c6c8aba037035e1b5ad0e8d328e8424f96d600fd","unresolved":true,"context_lines":[{"line_number":56,"context_line":"unsigned int adapter_get_speed_khz(void);"},{"line_number":57,"context_line":""},{"line_number":58,"context_line":"/** Retrieves the serial number set with command \u0027adapter serial\u0027 */"},{"line_number":59,"context_line":"const char *adapter_get_serial(void);"},{"line_number":60,"context_line":""},{"line_number":61,"context_line":"#endif /* OPENOCD_JTAG_ADAPTER_H */"}],"source_content_type":"text/x-csrc","patch_set":1,"id":"7bb8f4ff_e36d398c","line":59,"range":{"start_line":59,"start_character":12,"end_line":59,"end_character":30},"updated":"2021-11-03 17:02:44.000000000","message":"I prefer adapter_get_user_serial or adapter_get_serial_config,\nsince, adapter_get_serial could be confusing, hence: adapter_get_serial could be used for querying the real HW adapter for it\u0027s serial.","commit_id":"405ed9a10b92e4b7378e699251b4b3dbcb93921e"},{"author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"change_message_id":"30c598c17229d23c65680e5cfb30010320701520","unresolved":false,"context_lines":[{"line_number":56,"context_line":"unsigned int adapter_get_speed_khz(void);"},{"line_number":57,"context_line":""},{"line_number":58,"context_line":"/** Retrieves the serial number set with command \u0027adapter serial\u0027 */"},{"line_number":59,"context_line":"const char *adapter_get_serial(void);"},{"line_number":60,"context_line":""},{"line_number":61,"context_line":"#endif /* OPENOCD_JTAG_ADAPTER_H */"}],"source_content_type":"text/x-csrc","patch_set":1,"id":"c21c24d5_f76e01b8","line":59,"range":{"start_line":59,"start_character":12,"end_line":59,"end_character":30},"in_reply_to":"7716a5b4_6fb19f0f","updated":"2021-11-21 21:42:01.000000000","message":"Done","commit_id":"405ed9a10b92e4b7378e699251b4b3dbcb93921e"},{"author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"change_message_id":"c1a775cc52d75d8afc49e1cbe328e5d4cd76ad76","unresolved":true,"context_lines":[{"line_number":56,"context_line":"unsigned int adapter_get_speed_khz(void);"},{"line_number":57,"context_line":""},{"line_number":58,"context_line":"/** Retrieves the serial number set with command \u0027adapter serial\u0027 */"},{"line_number":59,"context_line":"const char *adapter_get_serial(void);"},{"line_number":60,"context_line":""},{"line_number":61,"context_line":"#endif /* OPENOCD_JTAG_ADAPTER_H */"}],"source_content_type":"text/x-csrc","patch_set":1,"id":"7716a5b4_6fb19f0f","line":59,"range":{"start_line":59,"start_character":12,"end_line":59,"end_character":30},"in_reply_to":"7bb8f4ff_e36d398c","updated":"2021-11-03 17:07:19.000000000","message":"Ack","commit_id":"405ed9a10b92e4b7378e699251b4b3dbcb93921e"}]}