)]}'
{"/COMMIT_MSG":[{"author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"change_message_id":"6e52e0f78dc7070498aefc064b78ed8b7df40ac4","unresolved":true,"context_lines":[{"line_number":4,"context_line":"Commit:     Christian U \u003cinfo@cu-tec.de\u003e"},{"line_number":5,"context_line":"CommitDate: 2022-08-05 14:55:49 +0200"},{"line_number":6,"context_line":""},{"line_number":7,"context_line":"Add support for Geehy Cortex-M0+ controllers"},{"line_number":8,"context_line":"proposed by Paul Fertser on the user mailing list"},{"line_number":9,"context_line":""},{"line_number":10,"context_line":"Change-Id: Iff08ded19166c6964e94732243e25dbaf3510bee"},{"line_number":11,"context_line":"Signed-off-by: Christian U \u003cinfo@cu-tec.de\u003e"}],"source_content_type":"text/x-gerrit-commit-message","patch_set":1,"id":"a73baefd_e24aa736","line":8,"range":{"start_line":7,"start_character":0,"end_line":8,"end_character":49},"updated":"2022-08-08 20:36:01.000000000","message":"Please follow\nhttps://openocd.org/doc/doxygen/html/patchguide.html\n\nThe first line should look like:\n flash/nor/stm32f1: add support for Geehy Cortex-M0+ controllers","commit_id":"875a5ec377ab940f122849a959587abb6656b507"},{"author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"change_message_id":"6e52e0f78dc7070498aefc064b78ed8b7df40ac4","unresolved":true,"context_lines":[{"line_number":7,"context_line":"Add support for Geehy Cortex-M0+ controllers"},{"line_number":8,"context_line":"proposed by Paul Fertser on the user mailing list"},{"line_number":9,"context_line":""},{"line_number":10,"context_line":"Change-Id: Iff08ded19166c6964e94732243e25dbaf3510bee"},{"line_number":11,"context_line":"Signed-off-by: Christian U \u003cinfo@cu-tec.de\u003e"}],"source_content_type":"text/x-gerrit-commit-message","patch_set":1,"id":"05cfd760_19a68644","line":10,"updated":"2022-08-08 20:36:01.000000000","message":"And the credit to Paul could be given by a standard tag (after Change-Id)\n Suggested-by: Paul Fertser \u003cfercerpav@gmail.com\u003e","commit_id":"875a5ec377ab940f122849a959587abb6656b507"}],"/PATCHSET_LEVEL":[{"author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"change_message_id":"6e52e0f78dc7070498aefc064b78ed8b7df40ac4","unresolved":false,"context_lines":[],"source_content_type":"","patch_set":1,"id":"bc0bb652_d8371a58","updated":"2022-08-08 20:36:01.000000000","message":"Thanks for the patch, Christian\n\nThe change looks simple and should work if APM32x has the flash fully compatible with STM32F1x\nI don\u0027t have an APM32 device to test. Did you test just basic flashing or all flash features including mass erase, write protection, option read/write/load, chip lock/unlock?\n\nThe new devices supported by the driver should be mentioned in doc/openocd.texi, chapter \n12.5.2 Internal Flash (Microcontrollers)\n","commit_id":"875a5ec377ab940f122849a959587abb6656b507"},{"author":{"_account_id":1002013,"name":"Christian U.","email":"info@cu-tec.de","username":"cutec-chris"},"change_message_id":"147001d1c29fb139b25d85cb53c1153459dff465","unresolved":false,"context_lines":[],"source_content_type":"","patch_set":1,"id":"bfcd3f09_aed07d08","in_reply_to":"bc0bb652_d8371a58","updated":"2022-08-16 06:49:17.000000000","message":"Hi, sry for the late answer i was expecting to get an mail :)\nI have tested mass erase and flash, the rest at time not and unfortionally i actually dont have an test setup. it was a sample production, that now is back to the developer. But as far i get an chip again in my hands i will test.","commit_id":"875a5ec377ab940f122849a959587abb6656b507"},{"author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"change_message_id":"44dce59e8886df0a13a5a429aa8f603d3593ba12","unresolved":false,"context_lines":[],"source_content_type":"","patch_set":1,"id":"c7a57aaa_43c354b3","in_reply_to":"bfcd3f09_aed07d08","updated":"2022-08-16 06:58:18.000000000","message":"\u003e Hi, sry for the late answer i was expecting to get an mail :)\n\nGerrit should send an e-mail to you. Check spam box and your mail in Gerrit user settings.","commit_id":"875a5ec377ab940f122849a959587abb6656b507"}]}