)]}'
{"id":"openocd~master~I70590c7c58bac6f1939c5ffba57e87d86850664d","project":"openocd","branch":"master","attention_set":{},"removed_from_attention_set":{"1002151":{"account":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"last_update":"2023-08-12 16:42:19.000000000","reason":"Change was submitted"},"1000021":{"account":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"last_update":"2023-07-24 15:37:06.000000000","reason":"\u003cGERRIT_ACCOUNT_1000021\u003e replied on the change","reason_account":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"}}},"hashtags":[],"change_id":"I70590c7c58bac6f1939c5ffba57e87d86850664d","subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","status":"MERGED","created":"2023-06-16 15:26:42.000000000","updated":"2023-08-12 16:42:19.000000000","submitted":"2023-08-12 16:42:19.000000000","submitter":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"total_comment_count":97,"unresolved_comment_count":0,"has_review_started":true,"submission_id":"7701","meta_rev_id":"6e627ff75cf74f3add64b32735f4c122dfe8265c","_number":7701,"owner":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"actions":{},"labels":{"Verified":{"approved":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"all":[{"value":0,"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},{"tag":"autogenerated:gerrit:merged","value":1,"date":"2023-08-12 16:42:19.000000000","permitted_voting_range":{"min":1,"max":1},"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]}],"values":{"-1":"Fails"," 0":"No score","+1":"Verified"},"description":"","default_value":0},"Code-Review":{"approved":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"all":[{"tag":"autogenerated:gerrit:merged","value":2,"date":"2023-08-12 16:42:19.000000000","permitted_voting_range":{"min":2,"max":2},"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},{"value":0,"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]}],"values":{"-2":"This shall not be merged","-1":"I would prefer this is not merged as is"," 0":"No score","+1":"Looks good to me, but someone else must approve","+2":"Looks good to me, approved"},"description":"","default_value":0}},"removable_reviewers":[],"reviewers":{"REVIEWER":[{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"}]},"pending_reviewers":{},"reviewer_updates":[{"updated":"2023-06-16 15:40:27.000000000","updated_by":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"reviewer":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"state":"REVIEWER"},{"updated":"2023-06-18 16:03:49.000000000","updated_by":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"reviewer":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"state":"CC"},{"updated":"2023-06-18 20:43:43.000000000","updated_by":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"reviewer":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"state":"REVIEWER"}],"messages":[{"id":"ca2e0ba773d7d6e7603dee6038e360d57601a710","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-16 15:26:42.000000000","message":"Uploaded patch set 1.","accounts_in_message":[],"_revision_number":1},{"id":"33dff9b1f12159d1e34c85617e78ca00695aea76","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-16 15:40:27.000000000","message":"Patch Set 1: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/17823/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17025/ : SUCCESS","accounts_in_message":[],"_revision_number":1},{"id":"14183ad15052e671506f3f4f0ceebc9d40e70c1d","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-06-18 16:03:49.000000000","message":"Patch Set 1:\n\n(11 comments)","accounts_in_message":[],"_revision_number":1},{"id":"a865633e1389453e872b344e40343230536f9c0e","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-06-18 20:43:43.000000000","message":"Patch Set 1: Code-Review-1\n\n(5 comments)","accounts_in_message":[],"_revision_number":1},{"id":"e889fb776122f2b269dca32b5c3cc14873801ade","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-19 13:04:51.000000000","message":"Uploaded patch set 2.\n\nOutdated Votes:\n* Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":2},{"id":"3ccdc4be9ee427e9080f041e8327db306731bba5","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-19 13:23:32.000000000","message":"Patch Set 2: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/17838/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17039/ : SUCCESS","accounts_in_message":[],"_revision_number":2},{"id":"66eb80adcf437e4e76de2a501ae196356c0c3b7e","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-19 15:52:09.000000000","message":"Uploaded patch set 3.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":3},{"id":"5122d74519fd7062f917ff1bb1285806c7aba7ef","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-19 15:55:47.000000000","message":"Uploaded patch set 4.","accounts_in_message":[],"_revision_number":4},{"id":"102aab7a7f6b8f12475c0db7876c86a1633bc376","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-19 15:55:54.000000000","message":"Patch Set 3: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/17041/ : ABORTED\n\nhttps://build.openocd.org/job/openocd-gerrit/17840/ : SUCCESS","accounts_in_message":[],"_revision_number":3},{"id":"5bdf055fe48026a4688a32e15f8826431e939ee8","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-19 16:12:59.000000000","message":"Patch Set 4: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/17841/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17042/ : SUCCESS","accounts_in_message":[],"_revision_number":4},{"id":"c93bfe2e2497482e8c421c75af6c0884453c6b7b","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-20 11:54:33.000000000","message":"Uploaded patch set 5.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":5},{"id":"aa46ca6b53e772a1224fd5b24582df43fe8cecbf","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-20 11:56:28.000000000","message":"Patch Set 5: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/17847/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17048/ : FAILURE","accounts_in_message":[],"_revision_number":5},{"id":"2ca9adae3a0f98c57bb420a454a27d7e0cb6db15","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-20 12:24:28.000000000","message":"Uploaded patch set 6: Patch Set 5 was rebased.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":6},{"id":"f8be5fea3d88aa46c6ceba5e0c7c08e3109c34c9","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-20 12:31:18.000000000","message":"Patch Set 6: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/17851/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17050/ : FAILURE","accounts_in_message":[],"_revision_number":6},{"id":"0eda773f1177129a4713badc8cea08c605db3046","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-20 12:40:04.000000000","message":"Uploaded patch set 7: New patch set was added with same tree, parent tree, and commit message as Patch Set 6.\n\nCopied Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":7},{"id":"d6eeb88c5aaa82ce78b9e9465eea073afde696b0","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-20 12:42:12.000000000","message":"Uploaded patch set 8: Commit message was updated.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":8},{"id":"78599437ee581923e7cb4e658fa764fc4fe9185b","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-20 12:42:13.000000000","message":"Patch Set 7:\n\nNo Builds Executed \u0027","accounts_in_message":[],"_revision_number":7},{"id":"47f4cdcc31ca484e953a4dd35c5e777fd38c7f98","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-20 12:55:24.000000000","message":"Patch Set 8: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/17853/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17053/ : FAILURE","accounts_in_message":[],"_revision_number":8},{"id":"7a4426d1bc593fb76b36e1d64cf48019b271ddf9","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-20 13:00:14.000000000","message":"Uploaded patch set 9: Patch Set 8 was rebased.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":9},{"id":"05f8da7b1ca64cf5bc84906ff3ac4f03b554885e","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-20 13:01:21.000000000","message":"Patch Set 9: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/17855/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17055/ : FAILURE","accounts_in_message":[],"_revision_number":9},{"id":"d6200915b647d57165c4e094eb97b2b446b40412","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-20 13:13:50.000000000","message":"Uploaded patch set 10: Patch Set 9 was rebased.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":10},{"id":"6302c05decb9c04c9a8a7f49b4c98bf075df518b","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-20 13:28:33.000000000","message":"Patch Set 10: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/17858/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17058/ : FAILURE","accounts_in_message":[],"_revision_number":10},{"id":"21df28d61dc65887f7a5d01c4c9275a9cfb3d43f","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-20 14:09:58.000000000","message":"Uploaded patch set 11.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":11},{"id":"301bc82722afb2048b261ec865f2198b981d3144","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-06-20 14:24:14.000000000","message":"Patch Set 11: Code-Review-1\n\n(6 comments)","accounts_in_message":[],"_revision_number":11},{"id":"841f9c92e4d58a746f80216790111a253b1aca0f","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-20 14:28:14.000000000","message":"Patch Set 11: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/17861/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17061/ : FAILURE","accounts_in_message":[],"_revision_number":11},{"id":"3354b5a5803e34b5ae3ed24a5d5439e6b9162b2f","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-20 14:40:15.000000000","message":"Uploaded patch set 12.\n\nOutdated Votes:\n* Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":12},{"id":"56fdba9b03cdc13eb34873038b8d1259488a6852","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-20 14:43:26.000000000","message":"Uploaded patch set 13: New patch set was added with same tree, parent tree, and commit message as Patch Set 12.","accounts_in_message":[],"_revision_number":13},{"id":"4a59e1ccc2b79923d5e0bc8343b65e01e4d3d2b5","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-20 14:43:28.000000000","message":"Patch Set 12:\n\nNo Builds Executed \u0027","accounts_in_message":[],"_revision_number":12},{"id":"d727069ca0345fc39d5db820f74da504b724d3a6","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-20 15:03:52.000000000","message":"Uploaded patch set 14.","accounts_in_message":[],"_revision_number":14},{"id":"1deb8bd4910f5d02fa742bfd4e2a9d1675c95ed2","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-20 15:03:55.000000000","message":"Patch Set 13: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/17064/ : ABORTED\n\nhttps://build.openocd.org/job/openocd-gerrit/17864/ : SUCCESS","accounts_in_message":[],"_revision_number":13},{"id":"3fc255c6d3c24aba89ab5131a20a1ebf525eeb48","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-20 15:19:36.000000000","message":"Patch Set 14: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/17866/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17065/ : SUCCESS","accounts_in_message":[],"_revision_number":14},{"id":"f75fd4d005ca00e1ea5848b76e784b118826b3dd","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-21 14:04:52.000000000","message":"Uploaded patch set 15: New patch set was added with same tree, parent tree, and commit message as Patch Set 14.\n\nCopied Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":15},{"id":"0f675115ce14b3c307b33a3b8eb0e1b5c5e922ea","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-06-21 14:27:11.000000000","message":"Patch Set 15:\n\n(24 comments)","accounts_in_message":[],"_revision_number":15},{"id":"4b7142be249980afdeaff2b4348b3bb75b17a11d","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-21 14:41:55.000000000","message":"Patch Set 15: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/17870/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17069/ : SUCCESS","accounts_in_message":[],"_revision_number":15},{"id":"7df2f16173353e99dadf1144136b67d42071b82d","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-06-22 13:03:11.000000000","message":"Uploaded patch set 16.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":16},{"id":"8ab0349a115ff764b638ebf65257deb1a678e217","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-06-22 13:32:28.000000000","message":"Patch Set 16: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/17873/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17072/ : SUCCESS","accounts_in_message":[],"_revision_number":16},{"id":"3925c60044a7063165b06bf83ce7a894c2820722","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-05 15:21:23.000000000","message":"Uploaded patch set 17: Patch Set 16 was rebased.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":17},{"id":"85a7022a782acdb6525b0269b88b84f2b0536639","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-07-05 15:22:54.000000000","message":"Patch Set 17: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/17921/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17120/ : FAILURE","accounts_in_message":[],"_revision_number":17},{"id":"2693bc59b3a7b75bf222df871f16406225977368","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-05 15:29:13.000000000","message":"Uploaded patch set 18: Patch Set 17 was rebased.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":18},{"id":"8c389dc9d884fa3f8bcc75acde101493cea96fc4","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-07-05 15:58:47.000000000","message":"Patch Set 18: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/17924/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17123/ : SUCCESS","accounts_in_message":[],"_revision_number":18},{"id":"92ad76552fa08b7a7ab7bb0cb065e2e6a1ff66f8","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-07-08 17:58:07.000000000","message":"Patch Set 18:\n\n(6 comments)","accounts_in_message":[],"_revision_number":18},{"id":"63a83bf2cee9020bef497cde6008dc51cdbc94fe","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-10 13:10:14.000000000","message":"Uploaded patch set 19.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":19},{"id":"6f214d8254382088d0254f07678187232303c430","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-10 13:30:40.000000000","message":"Uploaded patch set 20.","accounts_in_message":[],"_revision_number":20},{"id":"179548efa8b981c510c074e6dee12ce1dfe92cbd","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-07-10 13:30:41.000000000","message":"Patch Set 19:\n\nNo Builds Executed \u0027","accounts_in_message":[],"_revision_number":19},{"id":"0cb6e9e9318afc503298fe5eb41077cca3609210","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-07-10 14:07:42.000000000","message":"Patch Set 20: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/17948/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17147/ : FAILURE","accounts_in_message":[],"_revision_number":20},{"id":"40b844eb3798f08f093e79ae093f8c3721e47940","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-10 14:23:52.000000000","message":"Uploaded patch set 21.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":21},{"id":"c3effc8c522bdfd6ecb62b24a1b5ed68036b795a","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-07-10 14:40:44.000000000","message":"Patch Set 21: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/17951/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17150/ : FAILURE","accounts_in_message":[],"_revision_number":21},{"id":"1b8bf109513a452492749ec1bc6876b75f003c03","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-10 15:31:32.000000000","message":"Uploaded patch set 22.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":22},{"id":"ce95146f81c214a032152b84bad641f592bcb8bb","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-07-10 15:47:49.000000000","message":"Patch Set 22: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/17954/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17153/ : SUCCESS","accounts_in_message":[],"_revision_number":22},{"id":"91d0122e858767c323c03efd758d7fbe915b75b3","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-07-10 22:41:37.000000000","message":"Patch Set 22:\n\n(2 comments)","accounts_in_message":[],"_revision_number":22},{"id":"fd5be4d9ae14c493d3465ba8d5297d909ca0bcae","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-07-10 22:43:50.000000000","message":"Patch Set 22:\n\n(2 comments)","accounts_in_message":[],"_revision_number":22},{"id":"ceedf72cac2c9d680f7e202e1bbc6780e2849931","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-11 08:05:30.000000000","message":"Patch Set 22:\n\n(29 comments)","accounts_in_message":[],"_revision_number":22},{"id":"6b290be860acc946318a878066762a7a28c75185","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-11 08:09:28.000000000","message":"Patch Set 22:\n\n(3 comments)","accounts_in_message":[],"_revision_number":22},{"id":"bce61cb8a50328b34ece173cc18e61edb3aba30c","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-11 08:13:56.000000000","message":"Patch Set 22:\n\n(3 comments)","accounts_in_message":[],"_revision_number":22},{"id":"d92275929c5f49f5fbe80ac5ad0de38110fe9cf8","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-11 09:14:36.000000000","message":"Uploaded patch set 23.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":23},{"id":"dd3be8706593d311552f544d4ac9d8705761d2c4","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-07-11 09:33:39.000000000","message":"Patch Set 23: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/17963/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17162/ : SUCCESS","accounts_in_message":[],"_revision_number":23},{"id":"5a917bfc0cdc2f0c160fc193b9d2a199aa11d208","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-11 14:10:57.000000000","message":"Patch Set 23:\n\n(1 comment)","accounts_in_message":[],"_revision_number":23},{"id":"9356e91560245307c209fc2ac399909eef063d5c","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-07-11 20:55:53.000000000","message":"Patch Set 23: Code-Review+1\n\n(4 comments)","accounts_in_message":[],"_revision_number":23},{"id":"24320f6261885ce4c9d88b6f92dbe85d63f9a98a","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-24 08:27:20.000000000","message":"Uploaded patch set 24: Patch Set 23 was rebased.\n\nOutdated Votes:\n* Code-Review+1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":24},{"id":"d41ee03cf7d21c236fb92d5e83af01bf15e9d705","author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"real_author":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"date":"2023-07-24 08:30:52.000000000","message":"Patch Set 24:\n\n(1 comment)","accounts_in_message":[],"_revision_number":24},{"id":"74541fa3a48b5a99042b71f35e3047a4e1f365ea","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-07-24 09:36:55.000000000","message":"Patch Set 24: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18016/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17215/ : SUCCESS","accounts_in_message":[],"_revision_number":24},{"id":"11df92a5a7cac58160530694d2daafbd6476729f","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-07-24 15:37:06.000000000","message":"Patch Set 24: Code-Review+1","accounts_in_message":[],"_revision_number":24},{"id":"caa3d1160279adceb1bd2d556bad307d8607598b","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-08-12 16:41:51.000000000","message":"Patch Set 24: Code-Review+2","accounts_in_message":[],"_revision_number":24},{"id":"6e627ff75cf74f3add64b32735f4c122dfe8265c","tag":"autogenerated:gerrit:merged","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-08-12 16:42:19.000000000","message":"Change has been successfully cherry-picked as 9c91ce8d24d0789a0f25affb73201c9e0a6b89d8","accounts_in_message":[],"_revision_number":25}],"current_revision":"9c91ce8d24d0789a0f25affb73201c9e0a6b89d8","revisions":{"9c91ce8d24d0789a0f25affb73201c9e0a6b89d8":{"kind":"REWORK","_number":25,"created":"2023-08-12 16:42:19.000000000","uploader":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"ref":"refs/changes/01/7701/25","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/25","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/25 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/25 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/25 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/25 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/25","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/25 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"3b78b5c1db68841fdc18ee48b6011f4affff2bfd","subject":"libusb_helper: split error and returned value"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","date":"2023-08-12 16:42:19.000000000","tz":0},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\nReviewed-on: https://review.openocd.org/c/openocd/+/7701\nTested-by: jenkins\nReviewed-by: Antonio Borneo \u003cborneo.antonio@gmail.com\u003e\n"}},"e386ea387e8003e74031d9b58f9e78566bfbf1a3":{"kind":"TRIVIAL_REBASE","_number":24,"created":"2023-07-24 08:27:20.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/24","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/24","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/24 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/24 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/24 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/24 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/24","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/24 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"396fe00810bae84caea490e1106e244174aaad38","subject":"libusb_helper: split error and returned value"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-07-24 08:26:13.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"59f350bf0a7dd8f609a1a6c6f5f4424189a2efb4":{"kind":"REWORK","_number":19,"created":"2023-07-10 13:10:14.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/19","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/19","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/19 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/19 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/19 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/19 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/19","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/19 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"73556c2e8812d780d0aed61e4f5dfff5f0324923","subject":"libusb_helper: split error and returned value"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-07-10 13:09:43.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"230ff7c1d48c002143a64be62d9ba825853b72d1":{"kind":"TRIVIAL_REBASE","_number":18,"created":"2023-07-05 15:29:13.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/18","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/18","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/18 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/18 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/18 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/18 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/18","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/18 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"2b000de23a18dbbaae7ea2bc276557bf6bb97be8","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-07-05 15:29:02.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"388a5d35549244165ed39e069c7d857e6767bfcd":{"kind":"TRIVIAL_REBASE","_number":17,"created":"2023-07-05 15:21:23.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/17","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/17","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/17 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/17 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/17 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/17 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/17","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/17 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"56fd04832abc0ebadc21ee6127be4be9c7b46e15","subject":"semihosting: fix handling of errno"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-07-05 15:20:54.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"274eb56c674ccfe0c9ba36d29ba7658f1c8d3a51":{"kind":"REWORK","_number":16,"created":"2023-06-22 13:03:11.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/16","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/16","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/16 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/16 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/16 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/16 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/16","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/16 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"96266ad2429c977ec47ef0199eedb4a6ac2800b7","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-22 20:13:38.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"ebdde2f4c4cf31200a650516945644825574e9f9":{"kind":"REWORK","_number":23,"created":"2023-07-11 09:14:36.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/23","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/23","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/23 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/23 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/23 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/23 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/23","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/23 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"73556c2e8812d780d0aed61e4f5dfff5f0324923","subject":"libusb_helper: split error and returned value"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-07-11 08:54:29.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"4b27f9fc40605fb2affdd93940c25f1819c8f1ad":{"kind":"REWORK","_number":22,"created":"2023-07-10 15:31:32.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/22","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/22","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/22 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/22 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/22 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/22 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/22","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/22 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"73556c2e8812d780d0aed61e4f5dfff5f0324923","subject":"libusb_helper: split error and returned value"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-07-10 15:30:42.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"32bf3b9ae6ed7674b52b016a0ce2c0b7d54047ef":{"kind":"REWORK","_number":21,"created":"2023-07-10 14:23:52.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/21","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/21","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/21 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/21 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/21 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/21 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/21","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/21 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"73556c2e8812d780d0aed61e4f5dfff5f0324923","subject":"libusb_helper: split error and returned value"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-07-10 14:23:01.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"aa2f046c12050d713a163dec65870d19f2532835":{"kind":"REWORK","_number":20,"created":"2023-07-10 13:30:40.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/20","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/20","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/20 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/20 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/20 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/20 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/20","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/20 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"73556c2e8812d780d0aed61e4f5dfff5f0324923","subject":"libusb_helper: split error and returned value"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-07-10 13:29:29.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"a762b2f672e3b5b4bded3b8680f3924dab0a6a8c":{"kind":"REWORK","_number":11,"created":"2023-06-20 14:09:58.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/11","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/11","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/11 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/11 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/11 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/11 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/11","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/11 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"c8d39e33aaf38671308e93f287285fc46a7b1525","subject":"LICENSES: Add the LGPL-2.1 and Apache-2.0 licenses"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-20 21:45:08.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"14cdc80361bbd6bf4ae9cceb529c7697d40b8f40":{"kind":"TRIVIAL_REBASE","_number":10,"created":"2023-06-20 13:13:50.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/10","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/10","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/10 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/10 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/10 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/10 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/10","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/10 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"c8d39e33aaf38671308e93f287285fc46a7b1525","subject":"LICENSES: Add the LGPL-2.1 and Apache-2.0 licenses"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-20 21:11:09.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"93d3b61c912d8e1a75281123ac8ed07764b977c8":{"kind":"TRIVIAL_REBASE","_number":9,"created":"2023-06-20 13:00:14.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/9","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/9","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/9 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/9 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/9 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/9 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/9","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/9 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"eebcf3cff16afbce2c57cf2dba6f562e17713093","subject":"riscv/semihosting: Fix ebreak skip on fileio mode"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-20 20:57:16.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"c5753a46136c773f0cedc5cb7bf3a52a89a8e75d":{"kind":"NO_CODE_CHANGE","_number":8,"created":"2023-06-20 12:42:12.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/8","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/8","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/8 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/8 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/8 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/8 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/8","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/8 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"6a934bf0909e86a352da5fbdf048532caf38c77a","subject":"LICENSES: Add the LGPL-2.1 and Apache-2.0 licenses"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-20 20:39:23.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"2dd28fdd76a19dd5901a8d53c13fe6f75f12027f":{"kind":"NO_CHANGE","_number":15,"created":"2023-06-21 14:04:52.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/15","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/15","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/15 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/15 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/15 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/15 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/15","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/15 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"96266ad2429c977ec47ef0199eedb4a6ac2800b7","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-21 22:02:02.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"f805e4f911ade546c4eff9f6377be0d82b4eb4e2":{"kind":"REWORK","_number":14,"created":"2023-06-20 15:03:52.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/14","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/14","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/14 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/14 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/14 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/14 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/14","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/14 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"14f97b9eda3fce6e4b6e95f7e76d8b9d36ffed43","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-20 23:00:06.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"2a02bbceb342347daf287114c8b26b620c06fd4a":{"kind":"NO_CHANGE","_number":13,"created":"2023-06-20 14:43:26.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/13","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/13","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/13 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/13 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/13 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/13 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/13","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/13 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"14f97b9eda3fce6e4b6e95f7e76d8b9d36ffed43","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-20 22:40:52.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"99395263a4e51bc4f1ff64775f5970d77702055f":{"kind":"REWORK","_number":12,"created":"2023-06-20 14:40:15.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/12","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/12","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/12 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/12 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/12 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/12 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/12","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/12 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"e8fed84f0edbd8e62919c019a91a3c083d5e2adc","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-20 22:35:15.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so are the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"6e9d706b0b1c5c3cce4a7bcff71e2f1ad2898cc6":{"kind":"REWORK","_number":3,"created":"2023-06-19 15:52:09.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/3","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/3","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/3 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/3 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/3 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/3 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/3","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/3 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"e8fed84f0edbd8e62919c019a91a3c083d5e2adc","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-19 23:24:21.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware code\n\nThis is ANGIE\u0027s firmware code.\nThis code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so is the descriptors, interruptions and the endpoints\nconfiguration.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"99dc66abb64d2db41c8b3342791507de759a21dc":{"kind":"REWORK","_number":2,"created":"2023-06-19 13:04:51.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/2","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/2","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/2 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/2 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/2 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/2 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/2","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/2 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"e8fed84f0edbd8e62919c019a91a3c083d5e2adc","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-19 17:30:35.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware code\n\nThis is ANGIE\u0027s firmware code.\nThis code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so is the descriptors, interruptions and the endpoints\nconfiguration.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"fc1abe406752ffffafc741e44c42770a65e1e811":{"kind":"REWORK","_number":1,"created":"2023-06-16 15:26:42.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/1","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/1","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/1 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/1 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/1 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/1 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/1","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/1 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"63f4e7c72a27fb828fe1be3003be6a94519e1c12","subject":"target/ti-cjtag: make switching to JTAG more reliable"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 23:23:00.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware code\n\nThis is ANGIE\u0027s firmware code.\nThis code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so is the descriptors, interruptions and the endpoints\nconfiguration.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"154573fcbb3aa52943208fcc7b4ad2235a8034f3":{"kind":"NO_CHANGE","_number":7,"created":"2023-06-20 12:40:04.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/7","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/7","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/7 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/7 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/7 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/7 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/7","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/7 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"6a934bf0909e86a352da5fbdf048532caf38c77a","subject":"LICENSES: Add the LGPL-2.1 and Apache-2.0 licenses"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-20 20:31:26.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so is the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"2a6f6e7efafcb3010c2d67f44016e575e55302e3":{"kind":"TRIVIAL_REBASE","_number":6,"created":"2023-06-20 12:24:28.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/6","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/6","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/6 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/6 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/6 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/6 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/6","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/6 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"e6dac5c1af6935611918ecf860b330bf7340145c","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-20 20:21:26.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so is the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"1a894ad886a22a83c6ec8e94f3eb63eb6d98ad00":{"kind":"REWORK","_number":5,"created":"2023-06-20 11:54:33.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/5","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/5","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/5 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/5 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/5 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/5 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/5","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/5 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"e8fed84f0edbd8e62919c019a91a3c083d5e2adc","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-20 19:37:02.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware/bitstream code\n\nThis is ANGIE\u0027s firmware and bitstream code.\nThe \u0027Embeded C\u0027 code is based on the openULINK project.\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so is the descriptors, interruptions and the endpoints\nconfiguration.\n\nThe hdl bitstream source code is for the spartan-6 FPGA included in\nANGIE.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}},"04881f7c89b1b5584b915e40543f35de86a77099":{"kind":"REWORK","_number":4,"created":"2023-06-19 15:55:47.000000000","uploader":{"_account_id":1002151,"name":"ahmed BOUDJELIDA","display_name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","username":"aboudjelida"},"ref":"refs/changes/01/7701/4","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/01/7701/4","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/4 \u0026\u0026 git checkout -b change-7701 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/4 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/4 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/4 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/01/7701/4","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/01/7701/4 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"e8fed84f0edbd8e62919c019a91a3c083d5e2adc","subject":"LICENSES: Add the LGPL-2.1 license"}],"author":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-16 21:19:05.000000000","tz":120},"committer":{"name":"Ahmed BOUDJELIDA","email":"aboudjelida@nanoxplore.com","date":"2023-06-19 23:52:51.000000000","tz":120},"subject":"contrib/firmware: add new adapter ANGIE\u0027s firmware code","message":"contrib/firmware: add new adapter ANGIE\u0027s firmware code\n\nThis is ANGIE\u0027s firmware code.\nThis code is based on the openULINK project.\n\nSince ANGIE has a different microcontroller (EZ-USB FX2) than openULINK\n(EZ-USB AN2131), the registers file (reg_ezusb.h) has been changed\ncompletely, so is the descriptors, interruptions and the endpoints\nconfiguration.\n\nChange-Id: I70590c7c58bac6f1939c5ffba57e87d86850664d\nSigned-off-by: Ahmed BOUDJELIDA \u003caboudjelida@nanoxplore.com\u003e\n"}}},"requirements":[],"submit_records":[{"rule_name":"gerrit~DefaultSubmitRule","status":"CLOSED","labels":[{"label":"Verified","status":"OK","applied_by":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]}},{"label":"Code-Review","status":"OK","applied_by":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"}}]}],"submit_requirements":[{"name":"Verified","status":"SATISFIED","is_legacy":true,"submittability_expression_result":{"expression":"label:Verified\u003dMAX -label:Verified\u003dMIN","fulfilled":true,"status":"PASS","passing_atoms":["label:Verified\u003dMAX","-label:Verified\u003dMIN"],"failing_atoms":[]}},{"name":"Code-Review","status":"SATISFIED","is_legacy":true,"submittability_expression_result":{"expression":"label:Code-Review\u003dMAX -label:Code-Review\u003dMIN","fulfilled":true,"status":"PASS","passing_atoms":["label:Code-Review\u003dMAX","-label:Code-Review\u003dMIN"],"failing_atoms":[]}}]}