)]}'
{"id":"openocd~master~I5fca9dd015111e4410fea029611fdeedbb228fdb","project":"openocd","branch":"master","attention_set":{},"removed_from_attention_set":{"1002195":{"account":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"last_update":"2025-08-24 05:02:38.000000000","reason":"Change was submitted"},"1002339":{"account":{"_account_id":1002339,"name":"swk","username":"123swk123"},"last_update":"2025-08-03 22:28:53.000000000","reason":"Change was marked work in progress"},"1002199":{"account":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"last_update":"2025-08-04 19:43:58.000000000","reason":"Change was marked work in progress"},"1000021":{"account":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"last_update":"2025-08-04 19:43:58.000000000","reason":"Change was marked work in progress"},"1000859":{"account":{"_account_id":1000859,"name":"Karl Palsson","email":"karlp@tweak.au","username":"karlp"},"last_update":"2025-01-23 20:50:58.000000000","reason":"Change was marked work in progress"},"1002298":{"account":{"_account_id":1002298,"name":"Marek Kraus","email":"gamelaster@outlook.com","username":"gamelaster"},"last_update":"2025-08-24 05:02:38.000000000","reason":"Change was submitted"},"1000410":{"account":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"last_update":"2025-08-24 05:02:38.000000000","reason":"Change was submitted"},"1000687":{"account":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"last_update":"2025-08-14 13:38:12.000000000","reason":"removed on reply"},"1002429":{"account":{"_account_id":1002429,"name":"Danielle Church","username":"dmchurch"},"last_update":"2025-08-24 05:02:38.000000000","reason":"Change was submitted"},"1001964":{"account":{"_account_id":1001964,"name":"Erhan Kurubas","display_name":"Erhan Kurubas","email":"erhan.kurubas@espressif.com","username":"erhankur"},"last_update":"2025-08-24 05:02:38.000000000","reason":"Change was submitted"},"1002364":{"account":{"_account_id":1002364,"name":"Deomid Ryabkov","username":"rojer"},"last_update":"2025-08-04 19:43:58.000000000","reason":"Change was marked work in progress"}},"hashtags":[],"change_id":"I5fca9dd015111e4410fea029611fdeedbb228fdb","subject":"jtag/drivers: Add support for CH347-based JTAG adapters","status":"MERGED","created":"2023-10-14 16:23:59.000000000","updated":"2025-08-24 05:02:38.000000000","submitted":"2025-08-24 05:02:38.000000000","submitter":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"total_comment_count":379,"unresolved_comment_count":0,"has_review_started":true,"submission_id":"7937","meta_rev_id":"aef61945ac10706e05d02e6c982d1339953db7ff","_number":7937,"owner":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"actions":{},"labels":{"Verified":{"approved":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"all":[{"value":0,"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},{"value":0,"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},{"value":0,"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},{"value":0,"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},{"tag":"autogenerated:gerrit:merged","value":1,"date":"2025-08-24 05:02:38.000000000","permitted_voting_range":{"min":1,"max":1},"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]}],"values":{"-1":"Fails"," 0":"No score","+1":"Verified"},"description":"","default_value":0},"Code-Review":{"approved":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"all":[{"tag":"autogenerated:gerrit:merged","value":1,"date":"2025-08-24 05:02:38.000000000","permitted_voting_range":{"min":1,"max":1},"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},{"tag":"autogenerated:gerrit:merged","value":1,"date":"2025-08-24 05:02:38.000000000","permitted_voting_range":{"min":1,"max":1},"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},{"value":0,"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},{"tag":"autogenerated:gerrit:merged","value":2,"date":"2025-08-24 05:02:38.000000000","permitted_voting_range":{"min":2,"max":2},"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},{"value":0,"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]}],"values":{"-2":"This shall not be merged","-1":"I would prefer this is not merged as is"," 0":"No score","+1":"Looks good to me, but someone else must approve","+2":"Looks good to me, approved"},"description":"","default_value":0}},"removable_reviewers":[{"_account_id":1001964,"name":"Erhan Kurubas","display_name":"Erhan Kurubas","email":"erhan.kurubas@espressif.com","username":"erhankur"}],"reviewers":{"CC":[{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},{"_account_id":1000859,"name":"Karl Palsson","email":"karlp@tweak.au","username":"karlp"},{"_account_id":1002298,"name":"Marek Kraus","email":"gamelaster@outlook.com","username":"gamelaster"},{"_account_id":1002339,"name":"swk","username":"123swk123"},{"_account_id":1002364,"name":"Deomid Ryabkov","username":"rojer"},{"_account_id":1002429,"name":"Danielle Church","username":"dmchurch"}],"REVIEWER":[{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},{"_account_id":1001964,"name":"Erhan Kurubas","display_name":"Erhan Kurubas","email":"erhan.kurubas@espressif.com","username":"erhankur"},{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"}]},"pending_reviewers":{},"reviewer_updates":[{"updated":"2023-10-14 17:08:51.000000000","updated_by":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"reviewer":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"state":"REVIEWER"},{"updated":"2023-10-14 17:25:53.000000000","updated_by":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"reviewer":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"state":"CC"},{"updated":"2023-10-16 08:34:04.000000000","updated_by":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"reviewer":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"state":"CC"},{"updated":"2023-10-22 20:22:12.000000000","updated_by":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"reviewer":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"state":"REVIEWER"},{"updated":"2023-10-26 19:36:34.000000000","updated_by":{"_account_id":1001964,"name":"Erhan Kurubas","display_name":"Erhan Kurubas","email":"erhan.kurubas@espressif.com","username":"erhankur"},"reviewer":{"_account_id":1001964,"name":"Erhan Kurubas","display_name":"Erhan Kurubas","email":"erhan.kurubas@espressif.com","username":"erhankur"},"state":"REVIEWER"},{"updated":"2023-11-10 10:50:48.000000000","updated_by":{"_account_id":1000859,"name":"Karl Palsson","email":"karlp@tweak.au","username":"karlp"},"reviewer":{"_account_id":1000859,"name":"Karl Palsson","email":"karlp@tweak.au","username":"karlp"},"state":"CC"},{"updated":"2023-12-08 08:49:46.000000000","updated_by":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"reviewer":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"state":"CC"},{"updated":"2024-04-03 03:20:57.000000000","updated_by":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"reviewer":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"state":"REVIEWER"},{"updated":"2024-04-08 05:22:15.000000000","updated_by":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"reviewer":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"state":"REMOVED"},{"updated":"2024-04-11 02:00:50.000000000","updated_by":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"reviewer":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"state":"CC"},{"updated":"2024-04-26 09:41:17.000000000","updated_by":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"reviewer":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"state":"CC"},{"updated":"2024-11-19 17:14:45.000000000","updated_by":{"_account_id":1002339,"name":"swk","username":"123swk123"},"reviewer":{"_account_id":1002339,"name":"swk","username":"123swk123"},"state":"CC"},{"updated":"2025-01-22 21:25:59.000000000","updated_by":{"_account_id":1002364,"name":"Deomid Ryabkov","username":"rojer"},"reviewer":{"_account_id":1002364,"name":"Deomid Ryabkov","username":"rojer"},"state":"CC"},{"updated":"2025-01-23 08:56:24.000000000","updated_by":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"reviewer":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"state":"REVIEWER"},{"updated":"2025-03-02 14:43:41.000000000","updated_by":{"_account_id":1002298,"name":"Marek Kraus","email":"gamelaster@outlook.com","username":"gamelaster"},"reviewer":{"_account_id":1002298,"name":"Marek Kraus","email":"gamelaster@outlook.com","username":"gamelaster"},"state":"CC"},{"updated":"2025-07-30 21:09:38.000000000","updated_by":{"_account_id":1002429,"name":"Danielle Church","username":"dmchurch"},"reviewer":{"_account_id":1002429,"name":"Danielle Church","username":"dmchurch"},"state":"CC"},{"updated":"2025-08-06 06:49:35.000000000","updated_by":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"reviewer":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"state":"REVIEWER"}],"messages":[{"id":"8dbd9181cd1605b8983adb1f710e1e06ccdc7cee","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-14 16:23:59.000000000","message":"Uploaded patch set 1.","accounts_in_message":[],"_revision_number":1},{"id":"05db5e6ef0898f3089f2879033eb12c8ac6b1f9a","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-14 17:08:51.000000000","message":"Patch Set 1: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/18546/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17730/ : FAILURE","accounts_in_message":[],"_revision_number":1},{"id":"ff11f92c3c41d410d027cce61dea6f165641120d","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-10-14 17:25:53.000000000","message":"Patch Set 1:\n\n(9 comments)","accounts_in_message":[],"_revision_number":1},{"id":"b969473980e62960ec5afa9d24faa2cf9727064f","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-14 22:11:56.000000000","message":"Uploaded patch set 2.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":2},{"id":"858b4c0839dea9a6c8bc553ee6f08ef3f7c0f89b","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-14 22:14:57.000000000","message":"Patch Set 2: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/18548/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17732/ : FAILURE","accounts_in_message":[],"_revision_number":2},{"id":"2c4e9b190b19a829971389c5d30b80195b7a4c63","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-14 22:19:03.000000000","message":"Patch Set 2:\n\n(8 comments)","accounts_in_message":[],"_revision_number":2},{"id":"864d94afe60ced33a8c47a20232cc9f33b499a74","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-14 22:45:59.000000000","message":"Patch Set 2:\n\n(1 comment)","accounts_in_message":[],"_revision_number":2},{"id":"b651a8e283b37f3f34a4fc36d0f71ee4b292c5dd","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-14 23:16:12.000000000","message":"Uploaded patch set 3.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":3},{"id":"803ae7d5dc649b2e51e19564051e2a49d696ba1f","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-14 23:18:26.000000000","message":"Patch Set 3: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/18549/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17733/ : FAILURE","accounts_in_message":[],"_revision_number":3},{"id":"bc471446607b7bd42df8b0ffb63a043bb0f5c7fd","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-15 19:53:54.000000000","message":"Uploaded patch set 4.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":4},{"id":"09c955af9789b10d291bfbb910b301efeee303bd","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-15 19:55:59.000000000","message":"Patch Set 4: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/18550/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17734/ : FAILURE","accounts_in_message":[],"_revision_number":4},{"id":"a9f21a319608003519185e6b70401892ca578ae8","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-15 19:59:15.000000000","message":"Patch Set 5: Patch Set 4 was rebased\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":5},{"id":"17223bb52e922afa6d84ef2235318de5e702e3ad","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-15 20:58:40.000000000","message":"Patch Set 5: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/17736/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit/18552/ : SUCCESS","accounts_in_message":[],"_revision_number":5},{"id":"352b5020b8cb8ac86ccedf186625cbc3daf76004","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-10-15 21:23:18.000000000","message":"Patch Set 5:\n\n(2 comments)","accounts_in_message":[],"_revision_number":5},{"id":"c88b523b77d9407ae3926c5db0674fa8b3c72050","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-15 21:30:51.000000000","message":"Uploaded patch set 6: Patch Set 5 was rebased.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":6},{"id":"88c528047386e026a16b052c814f52c0710c5c9a","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-15 21:37:03.000000000","message":"Patch Set 6: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/18553/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17737/ : FAILURE","accounts_in_message":[],"_revision_number":6},{"id":"a66070691fc8c2c0693974b6b9831a9b62015de8","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-15 21:41:12.000000000","message":"Uploaded patch set 7.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":7},{"id":"3de1a955ae668395c8a4c6d78e659288469b55fa","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-15 21:44:19.000000000","message":"Patch Set 7: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/18554/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17738/ : FAILURE","accounts_in_message":[],"_revision_number":7},{"id":"9af4636ad97a4d8e3b3334e1e9f60fe9ae05499a","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-15 21:46:26.000000000","message":"Patch Set 8: Patch Set 7 was rebased\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":8},{"id":"dade16bf3d2cee95ddb33217b0055d32e60a198e","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-15 21:47:09.000000000","message":"Patch Set 8:\n\n(1 comment)","accounts_in_message":[],"_revision_number":8},{"id":"a3e19c29915818937a9dfbf39087425aa3291851","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-15 22:02:03.000000000","message":"Patch Set 8:\n\n(1 comment)","accounts_in_message":[],"_revision_number":8},{"id":"c1fbf1cc40ecce5e4095824a2d05085c3ec0b210","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-15 22:09:00.000000000","message":"Patch Set 8: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18555/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17739/ : SUCCESS","accounts_in_message":[],"_revision_number":8},{"id":"c527766d239873993750b71fa27a84f341c344a6","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-15 22:19:29.000000000","message":"Patch Set 8:\n\n(1 comment)","accounts_in_message":[],"_revision_number":8},{"id":"31ce2292824abecadf81397f510b12f42f908e8d","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-10-16 08:34:04.000000000","message":"Patch Set 8:\n\n(14 comments)","accounts_in_message":[],"_revision_number":8},{"id":"e0abe656d94c941c3843bfc87859d9028c8b103a","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-16 22:36:10.000000000","message":"Uploaded patch set 9.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":9},{"id":"6feebd564af2ed97a74ccde849f8bbe45f509b5d","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-16 22:55:25.000000000","message":"Patch Set 9:\n\n(14 comments)","accounts_in_message":[],"_revision_number":9},{"id":"399695288dad068c98014f6e8e607f4784055a67","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-16 23:01:35.000000000","message":"Patch Set 9: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/17746/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit/18561/ : SUCCESS","accounts_in_message":[],"_revision_number":9},{"id":"f5a8205ba79789798d8ec44412ef666e476f3a65","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-16 23:13:43.000000000","message":"Patch Set 9:\n\n(1 comment)","accounts_in_message":[],"_revision_number":9},{"id":"db8272982b13f238b0172f64174277203fa9b5c1","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-17 14:38:56.000000000","message":"Patch Set 10: Published edit on patch set 9.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":10},{"id":"37efa8f9f5f1dc23cab8c1cb38ddeb9e238e45c5","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-17 15:02:06.000000000","message":"Patch Set 10: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18563/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17748/ : SUCCESS","accounts_in_message":[],"_revision_number":10},{"id":"35f316830ebc512e6a7ec1e9b113f15a72dc7535","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-17 15:07:08.000000000","message":"Patch Set 10:\n\n(1 comment)","accounts_in_message":[],"_revision_number":10},{"id":"744263e8e990a3a724f54da700558e33bda4eaa7","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-17 22:44:18.000000000","message":"Uploaded patch set 11: New patch set was added with same tree, parent tree, and commit message as Patch Set 10.\n\nCopied Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":11},{"id":"80eca0c7274fe8d8c60392a7921b7fbad6252950","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-17 22:47:40.000000000","message":"Uploaded patch set 12.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":12},{"id":"cffb15e934cd4a0ec18c26da4beadf2b927fbf14","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-17 22:48:11.000000000","message":"Patch Set 11: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/18564/ : ABORTED\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17749/ : ABORTED","accounts_in_message":[],"_revision_number":11},{"id":"3fceb78f033127da1c285bf6a2e6c5b18df2e33b","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-17 22:50:08.000000000","message":"Patch Set 12:\n\n(1 comment)","accounts_in_message":[],"_revision_number":12},{"id":"b164d769c2ddd6ad54d154aabdc77120c2c4c91a","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-17 23:11:24.000000000","message":"Patch Set 12: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18565/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17750/ : SUCCESS","accounts_in_message":[],"_revision_number":12},{"id":"2177429939c91fa8bcf611c5000d2348d0d6eaaa","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-20 21:49:56.000000000","message":"Uploaded patch set 13.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":13},{"id":"6e7332a5889d51c4b5b6b4ac64e74de319b1d65b","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-20 22:59:28.000000000","message":"Patch Set 13: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18582/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17767/ : SUCCESS","accounts_in_message":[],"_revision_number":13},{"id":"e871424fca9b920272526a0009675a3c988831c9","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-10-22 20:22:12.000000000","message":"Patch Set 13: Code-Review-1\n\n(23 comments)","accounts_in_message":[],"_revision_number":13},{"id":"a3eb58d313dd219eb78d48841c7d6939f251945d","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-25 21:07:35.000000000","message":"Uploaded patch set 14: New patch set was added with same tree, parent tree, and commit message as Patch Set 13.\n\nCopied Votes:\n* Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":14},{"id":"5f07be9d59ece296ed6801b3f94533b970816212","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-25 21:37:15.000000000","message":"Uploaded patch set 15.\n\nOutdated Votes:\n* Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":15},{"id":"67ba186713b831f0495d3badb85315d1a7bd2049","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-25 21:43:23.000000000","message":"Patch Set 14: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18601/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17786/ : SUCCESS","accounts_in_message":[],"_revision_number":14},{"id":"626f8bfa44ef24faf1baf8b6ab38035b237457b3","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-25 21:52:44.000000000","message":"Uploaded patch set 16: New patch set was added with same tree, parent tree, and commit message as Patch Set 15.","accounts_in_message":[],"_revision_number":16},{"id":"d60fc3d627450c25a1df44886b6f67684940c3c0","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-25 22:02:13.000000000","message":"Patch Set 16:\n\n(1 comment)","accounts_in_message":[],"_revision_number":16},{"id":"5a287e1a01ad196ebcc8501fcda26067cf6f599f","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-25 22:13:26.000000000","message":"Patch Set 16:\n\n(4 comments)","accounts_in_message":[],"_revision_number":16},{"id":"ba3a880347c173e1f684ebf144cc373fbf3e6a96","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-25 22:24:50.000000000","message":"Patch Set 16: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18602/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17787/ : SUCCESS","accounts_in_message":[],"_revision_number":16},{"id":"286df30da54a16e8e62aae71dca2136c26a457eb","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-25 22:44:33.000000000","message":"Patch Set 16:\n\n(18 comments)","accounts_in_message":[],"_revision_number":16},{"id":"a9e4761b08fb1608edb65a0579e2d394a8a92560","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-25 22:54:06.000000000","message":"Uploaded patch set 17.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":17},{"id":"52d6a7843052c8cdc3538f878441012f24dc386d","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-25 22:55:04.000000000","message":"Patch Set 17:\n\n(2 comments)","accounts_in_message":[],"_revision_number":17},{"id":"42291dcd0f51a98a1f21a0c2c5f7335696af48d6","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-25 22:58:13.000000000","message":"Uploaded patch set 18.","accounts_in_message":[],"_revision_number":18},{"id":"7b3821a6dc3b438e3166f55297a1ab849c19a947","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-25 22:58:21.000000000","message":"Patch Set 17: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/17788/ : ABORTED\n\nhttps://build.openocd.org/job/openocd-gerrit/18603/ : SUCCESS","accounts_in_message":[],"_revision_number":17},{"id":"4e3d2a0de3b9d9af42066403a6bfa709521bd304","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-25 23:14:41.000000000","message":"Uploaded patch set 19.","accounts_in_message":[],"_revision_number":19},{"id":"09704b89e129e808089e2651de3a1dbe8459a170","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-25 23:18:20.000000000","message":"Patch Set 18: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/17789/ : ABORTED\n\nhttps://build.openocd.org/job/openocd-gerrit/18604/ : SUCCESS","accounts_in_message":[],"_revision_number":18},{"id":"970cc3698295fb6768d90c4353ef7352c452a7c9","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-25 23:51:09.000000000","message":"Patch Set 19: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18605/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17790/ : SUCCESS","accounts_in_message":[],"_revision_number":19},{"id":"8f38841043bcecc5744c464dd6c3efdd4b6d025e","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-26 14:06:06.000000000","message":"Uploaded patch set 20.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":20},{"id":"db37e453e116f470ab5827943e13ded0d5668080","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-26 14:40:01.000000000","message":"Patch Set 20:\n\n(1 comment)","accounts_in_message":[],"_revision_number":20},{"id":"80da79ba0587797b799d63c46d6ebcd0e901fff0","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-26 14:59:45.000000000","message":"Patch Set 20: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18607/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17792/ : SUCCESS","accounts_in_message":[],"_revision_number":20},{"id":"d5710e1d76f81ada4420259e95511a6eab39e48a","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-26 15:05:08.000000000","message":"Patch Set 20:\n\n(1 comment)","accounts_in_message":[],"_revision_number":20},{"id":"2621260b64c80b980d2a730851a8e2feb98b0942","author":{"_account_id":1001964,"name":"Erhan Kurubas","display_name":"Erhan Kurubas","email":"erhan.kurubas@espressif.com","username":"erhankur"},"real_author":{"_account_id":1001964,"name":"Erhan Kurubas","display_name":"Erhan Kurubas","email":"erhan.kurubas@espressif.com","username":"erhankur"},"date":"2023-10-26 19:36:34.000000000","message":"Patch Set 20:\n\n(12 comments)","accounts_in_message":[],"_revision_number":20},{"id":"8b35c6da93c4bb28b1ef4c9689ba34549d73a911","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-26 22:04:25.000000000","message":"Uploaded patch set 21: New patch set was added with same tree, parent tree, and commit message as Patch Set 20.\n\nCopied Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":21},{"id":"47be894f650ac87357d02d890788e289eda869cf","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-26 22:08:15.000000000","message":"Uploaded patch set 22.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":22},{"id":"441dafa31971cd33774a8f69f54de80bb06ea9c4","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-26 22:08:20.000000000","message":"Patch Set 21:\n\nNo Builds Executed \u0027","accounts_in_message":[],"_revision_number":21},{"id":"89df846fb4275b476539b92abb126f0ea7ba1cbf","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-26 22:08:58.000000000","message":"Patch Set 22:\n\n(12 comments)","accounts_in_message":[],"_revision_number":22},{"id":"b518e8d2d0c42984e19ea2d927017b0dc1b6af50","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-10-26 22:53:20.000000000","message":"Patch Set 22:\n\n(1 comment)","accounts_in_message":[],"_revision_number":22},{"id":"215c4902fd215532a07bb3705e802f0e02dfc275","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-26 23:10:42.000000000","message":"Patch Set 22: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18611/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17796/ : SUCCESS","accounts_in_message":[],"_revision_number":22},{"id":"e86a8e7d462948bba067be135e24f2cb04b165eb","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-10-27 14:34:29.000000000","message":"Patch Set 22:\n\n(23 comments)","accounts_in_message":[],"_revision_number":22},{"id":"1f786d203c7d74029e738349f7c865965869a0ef","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-27 23:12:12.000000000","message":"Uploaded patch set 23.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":23},{"id":"909c5f1b03ee7d42edd718180de3ff03bcd6d376","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-27 23:40:00.000000000","message":"Patch Set 23:\n\n(23 comments)","accounts_in_message":[],"_revision_number":23},{"id":"697096ac68d773f17b93d319e2c53084cf0375ab","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-27 23:47:52.000000000","message":"Patch Set 23: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18632/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17817/ : SUCCESS","accounts_in_message":[],"_revision_number":23},{"id":"fb0e6f374cea1072604315875cae92050d3748ec","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-27 23:48:10.000000000","message":"Uploaded patch set 24.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":24},{"id":"cce68c61b67b50a72b84b7004d4759a0cc2586a2","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-10-27 23:49:27.000000000","message":"Patch Set 23:\n\n(1 comment)","accounts_in_message":[],"_revision_number":23},{"id":"3f73e3d8115137c77089a9f91c980511c52d5d3e","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-10-28 00:18:16.000000000","message":"Patch Set 24: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18633/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17818/ : SUCCESS","accounts_in_message":[],"_revision_number":24},{"id":"880ddbfa62e4500e960b049512524426cc807178","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-11-02 17:28:58.000000000","message":"Patch Set 24:\n\n(2 comments)","accounts_in_message":[],"_revision_number":24},{"id":"f255f9e6237a0561f01c644c4cc735962c73a1a0","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-02 17:48:23.000000000","message":"Patch Set 24:\n\n(1 comment)","accounts_in_message":[],"_revision_number":24},{"id":"460956798ef0c45a7aa38d9b7d3e91fcd20beff5","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-02 21:47:29.000000000","message":"Patch Set 24:\n\n(1 comment)","accounts_in_message":[],"_revision_number":24},{"id":"da2e2a6f353661f57026c20c734d3e4ad5cf863d","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-11-02 22:30:36.000000000","message":"Patch Set 24:\n\n(3 comments)","accounts_in_message":[],"_revision_number":24},{"id":"e811772b1fcc44f5171f023435c74a3ee1a1e5b1","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-11-02 23:11:59.000000000","message":"Patch Set 24:\n\n(1 comment)","accounts_in_message":[],"_revision_number":24},{"id":"10e97ec5b6518105504abdd3d01237373045418e","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-11-03 10:34:01.000000000","message":"Patch Set 24:\n\n(3 comments)","accounts_in_message":[],"_revision_number":24},{"id":"12190b8a9545e273f697d8e76f19ce9340533c43","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-11-03 19:41:11.000000000","message":"Patch Set 24:\n\n(4 comments)","accounts_in_message":[],"_revision_number":24},{"id":"54998c1b0db13e17b24942c2605d0b69796bc3c1","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-03 21:05:13.000000000","message":"Uploaded patch set 25.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":25},{"id":"4c380879903a05e2b4f3c94a9c471f6796cb34cb","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-03 21:18:27.000000000","message":"Uploaded patch set 26.","accounts_in_message":[],"_revision_number":26},{"id":"494d87a681cdbf4373324b3dbc3a958af4640d3b","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-11-03 21:18:50.000000000","message":"Patch Set 25: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/17846/ : ABORTED\n\nhttps://build.openocd.org/job/openocd-gerrit/18662/ : SUCCESS","accounts_in_message":[],"_revision_number":25},{"id":"e8a27785640c3914822805edf69f8f3a6fafd566","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-11-03 21:31:41.000000000","message":"Patch Set 26: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18663/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17847/ : SUCCESS","accounts_in_message":[],"_revision_number":26},{"id":"c4c7cd77f26d7cd2da76b0454babc0a3679f1462","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-03 21:33:30.000000000","message":"Patch Set 26:\n\n(11 comments)","accounts_in_message":[],"_revision_number":26},{"id":"af0f39a0626fc3862b63e17845e60201e28737cf","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-11-04 10:56:03.000000000","message":"Patch Set 26:\n\n(1 comment)","accounts_in_message":[],"_revision_number":26},{"id":"286b8c6deeaf0a71db09e5dc9ce1270285e0be97","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-11-04 14:35:00.000000000","message":"Patch Set 26:\n\n(6 comments)","accounts_in_message":[],"_revision_number":26},{"id":"0bff8b36d6fa516854777535d072a823e166a4b3","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-11-04 17:52:56.000000000","message":"Patch Set 26:\n\n(1 comment)","accounts_in_message":[],"_revision_number":26},{"id":"7f56a06601bbf31ef0763a2978808da6c554383d","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-11-05 17:09:02.000000000","message":"Patch Set 26:\n\n(1 comment)","accounts_in_message":[],"_revision_number":26},{"id":"779450dcf3f2a4cba13ab7ebaefebfc5d143e08a","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-05 23:56:53.000000000","message":"Uploaded patch set 27.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":27},{"id":"89d04719406dd2b6361d630a2a2ab4c4eebdbe7c","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-06 00:07:27.000000000","message":"Patch Set 27:\n\n(6 comments)","accounts_in_message":[],"_revision_number":27},{"id":"1c2a1a22f42eab51c9ccb8b7517c5bef699255d7","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-11-06 00:10:41.000000000","message":"Patch Set 27: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18672/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17856/ : SUCCESS","accounts_in_message":[],"_revision_number":27},{"id":"5cff61ec1e58b361d0e3ba75209a17f63d4eff80","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-11-06 17:51:52.000000000","message":"Patch Set 27:\n\n(1 comment)","accounts_in_message":[],"_revision_number":27},{"id":"487df34aca21fc72ef414f1b420bc2ab4aae3113","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-06 21:13:28.000000000","message":"Patch Set 27:\n\n(1 comment)","accounts_in_message":[],"_revision_number":27},{"id":"7aead640f11c9b4c5051007c513b4a2d798b1d50","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-11-08 13:42:51.000000000","message":"Patch Set 27:\n\n(2 comments)","accounts_in_message":[],"_revision_number":27},{"id":"b2ccc8e290e138dfb0914d8bfc981b9e7e1d0491","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-09 21:42:51.000000000","message":"Uploaded patch set 28.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":28},{"id":"bd0132230eb80357f30ff7f6a55a8e3f624071e2","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-09 21:53:45.000000000","message":"Patch Set 28:\n\n(1 comment)","accounts_in_message":[],"_revision_number":28},{"id":"cb30ff4f9d9a44ff43d03fb3905d1e523763f01f","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-11-09 21:56:54.000000000","message":"Patch Set 28: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18697/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17881/ : SUCCESS","accounts_in_message":[],"_revision_number":28},{"id":"74f499253db93fee04b1e7065502e1a998f1b9d1","author":{"_account_id":1000859,"name":"Karl Palsson","email":"karlp@tweak.au","username":"karlp"},"real_author":{"_account_id":1000859,"name":"Karl Palsson","email":"karlp@tweak.au","username":"karlp"},"date":"2023-11-10 10:50:48.000000000","message":"Patch Set 28:\n\n(2 comments)","accounts_in_message":[],"_revision_number":28},{"id":"0b8ed2f31cf233563d083cbd6a9bbe691d17ac25","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-10 20:08:35.000000000","message":"Patch Set 28:\n\n(1 comment)","accounts_in_message":[],"_revision_number":28},{"id":"1389e226808f4918e1295b2ce404d0af571ed789","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2023-11-11 22:18:14.000000000","message":"Patch Set 28: Code-Review-1\n\n(2 comments)","accounts_in_message":[],"_revision_number":28},{"id":"69533d8f9c1933a5ede67e28f0d01c4674128fc0","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-11 22:46:32.000000000","message":"Uploaded patch set 29.\n\nOutdated Votes:\n* Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":29},{"id":"1bf204030a03a406be1cb245d6653dc8aab98e3f","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-11 22:50:46.000000000","message":"Patch Set 29:\n\n(2 comments)","accounts_in_message":[],"_revision_number":29},{"id":"5acba26b92a49bfab93701c80d0331a450b93c52","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-11 23:04:22.000000000","message":"Patch Set 30: Published edit on patch set 29.","accounts_in_message":[],"_revision_number":30},{"id":"12c93bc955aa4319bc8e2375a739b1d07962c641","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-11-11 23:04:37.000000000","message":"Patch Set 29: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/17893/ : ABORTED\n\nhttps://build.openocd.org/job/openocd-gerrit/18709/ : SUCCESS","accounts_in_message":[],"_revision_number":29},{"id":"513cc60c37414b2dbdf2fc6e5aa13c634bc384a1","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-11-11 23:18:49.000000000","message":"Patch Set 30: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18710/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/17894/ : SUCCESS","accounts_in_message":[],"_revision_number":30},{"id":"217898340b73b66bf999fd8e272d9bc3cb88f6a2","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-11-19 19:36:46.000000000","message":"Patch Set 30:\n\n(1 comment)","accounts_in_message":[],"_revision_number":30},{"id":"4d2cba616b04e172f71de98f4d3227bab8718e07","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2023-12-07 03:43:32.000000000","message":"Patch Set 31: Published edit on patch set 30.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":31},{"id":"49c02e1f637423d314932ab4c66db459cbc37fcc","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2023-12-07 03:56:43.000000000","message":"Patch Set 31: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/18997/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/18164/ : SUCCESS","accounts_in_message":[],"_revision_number":31},{"id":"799aa3cb01c6133a84ab7a373aecb7e337ceb158","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2023-12-08 08:49:46.000000000","message":"Patch Set 31:\n\n(2 comments)","accounts_in_message":[],"_revision_number":31},{"id":"a57ace5ecfe92c788b6d43529aa45072da632a25","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2023-12-08 09:14:46.000000000","message":"Patch Set 31:\n\n(2 comments)","accounts_in_message":[],"_revision_number":31},{"id":"46c3afbb0e11bfa42e0d3a067ef5cac0c862d0f3","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2023-12-11 05:25:03.000000000","message":"Patch Set 31:\n\n(1 comment)","accounts_in_message":[],"_revision_number":31},{"id":"b8eb0dbfc679870ac3b10592485ea9246407440e","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2023-12-11 08:09:11.000000000","message":"Patch Set 31:\n\n(1 comment)","accounts_in_message":[],"_revision_number":31},{"id":"551f064889eb557272b04c7a97ded18ed6d33db6","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2023-12-13 06:40:47.000000000","message":"Patch Set 31:\n\n(2 comments)","accounts_in_message":[],"_revision_number":31},{"id":"e7b3c3f44566585401098cc0d09cd04429c2616a","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2024-04-03 03:20:57.000000000","message":"Patch Set 31: Code-Review+1\n\n(1 comment)","accounts_in_message":[],"_revision_number":31},{"id":"599fc1dc20cfba5a3c4a8f96c93d033778d06568","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2024-04-08 05:22:15.000000000","message":"Patch Set 31: Code-Review-1\n\n(1 comment)","accounts_in_message":[],"_revision_number":31},{"id":"d44269f40010f9af3ed8f64ea0c993ef303a8c6a","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2024-04-10 16:08:22.000000000","message":"Patch Set 31:\n\n(1 comment)","accounts_in_message":[],"_revision_number":31},{"id":"08b8c7879b1efabf79b4c278bfcdd6ca5a791302","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2024-04-10 20:25:07.000000000","message":"Patch Set 31:\n\n(1 comment)","accounts_in_message":[],"_revision_number":31},{"id":"5dcee1c3a08510cb6342e08c2a38a4059f32874b","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2024-04-11 02:00:50.000000000","message":"Patch Set 31:\n\n(3 comments)","accounts_in_message":[],"_revision_number":31},{"id":"3ef8e1d7cd0b3e26c1188d2c662d2b1983addde9","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2024-04-11 05:19:46.000000000","message":"Patch Set 31:\n\n(1 comment)","accounts_in_message":[],"_revision_number":31},{"id":"556e85039738d9d47400754dbb9b33eedf474193","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2024-04-12 20:59:47.000000000","message":"Uploaded patch set 32.\n\nOutdated Votes:\n* Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":32},{"id":"739c40dc9622aecd92773e7501c6bb90df1bc58b","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2024-04-12 21:17:42.000000000","message":"Patch Set 32: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/19478/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/18638/ : SUCCESS","accounts_in_message":[],"_revision_number":32},{"id":"1683f048b741552a59300d10666cf5a9dda98c21","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2024-04-12 21:25:00.000000000","message":"Patch Set 32:\n\n(3 comments)","accounts_in_message":[],"_revision_number":32},{"id":"1e8ae89a9cfc87a56090f0d342e1f75833debc0d","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2024-04-12 21:33:12.000000000","message":"Uploaded patch set 33.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":33},{"id":"4487a20bf9cded21d04910ebfb29d338ba822c13","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2024-04-12 21:47:08.000000000","message":"Patch Set 33: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/19479/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/18639/ : SUCCESS","accounts_in_message":[],"_revision_number":33},{"id":"1c5222f3eb7545e1523d682df91eb5f9dcf067ba","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2024-04-13 01:55:00.000000000","message":"Patch Set 33:\n\n(2 comments)","accounts_in_message":[],"_revision_number":33},{"id":"d31214e0102bea664af68e2799dc03d03c33c840","author":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"real_author":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"date":"2024-04-26 09:41:17.000000000","message":"Patch Set 33:\n\n(9 comments)","accounts_in_message":[],"_revision_number":33},{"id":"4594e223821adef0bb1156928e24f16c903b6b58","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2024-04-28 19:37:27.000000000","message":"Uploaded patch set 34.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":34},{"id":"a9b8aa08092053c4f3a4fd463d940882572a60c6","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2024-04-28 19:43:15.000000000","message":"Patch Set 34:\n\n(9 comments)","accounts_in_message":[],"_revision_number":34},{"id":"792a18ca979138a3eef8d28dc97bb607f0ab4665","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2024-04-28 19:51:39.000000000","message":"Patch Set 34: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/19518/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/18678/ : SUCCESS","accounts_in_message":[],"_revision_number":34},{"id":"dc160707617c352fb7d31f1c953c258ff1f77ce1","author":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"real_author":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"date":"2024-05-07 10:32:13.000000000","message":"Patch Set 34:\n\n(4 comments)","accounts_in_message":[],"_revision_number":34},{"id":"193fe0f95ea4519598013cbc25c33674adf8ca22","author":{"_account_id":1002339,"name":"swk","username":"123swk123"},"real_author":{"_account_id":1002339,"name":"swk","username":"123swk123"},"date":"2024-11-19 17:14:45.000000000","message":"Patch Set 34:\n\n(3 comments)","accounts_in_message":[],"_revision_number":34},{"id":"a81c102c2427a5e07eeed7aab999254f82e61537","author":{"_account_id":1002339,"name":"swk","username":"123swk123"},"real_author":{"_account_id":1002339,"name":"swk","username":"123swk123"},"date":"2024-11-19 17:25:52.000000000","message":"Patch Set 34:\n\n(2 comments)","accounts_in_message":[],"_revision_number":34},{"id":"c6118c3744ea98d65f22fb5aa1009fbe5c4b84bb","author":{"_account_id":1002364,"name":"Deomid Ryabkov","username":"rojer"},"real_author":{"_account_id":1002364,"name":"Deomid Ryabkov","username":"rojer"},"date":"2025-01-22 21:25:59.000000000","message":"Patch Set 34:\n\n(1 comment)","accounts_in_message":[],"_revision_number":34},{"id":"d823afeb3669a8c3a180f42423d389ea83e4e235","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2025-01-23 02:58:47.000000000","message":"Patch Set 34:\n\n(1 comment)","accounts_in_message":[],"_revision_number":34},{"id":"4c596c57efd084b60c772cd5e6ee2ce42b8be751","author":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"real_author":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"date":"2025-01-23 08:56:24.000000000","message":"Patch Set 34: Code-Review-1\n\n(1 comment)","accounts_in_message":[],"_revision_number":34},{"id":"5698e17aadbdc2b2e4914146fab4edf707170c6d","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-23 09:42:00.000000000","message":"Patch Set 34:\n\n(1 comment)","accounts_in_message":[],"_revision_number":34},{"id":"2521f6ae2c90b32809e3c4a5a4d6bc5f53712028","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-23 20:50:58.000000000","message":"Patch Set 35: Patch Set 34 was rebased\n\nThe following files contain Git conflicts:\n* configure.ac\n\nOutdated Votes:\n* Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":35},{"id":"b36cf3c90eaf296613e61fc005fd7ed79ab35d3d","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-23 20:52:47.000000000","message":"Patch Set 36: Published edit on patch set 35.","accounts_in_message":[],"_revision_number":36},{"id":"bd0b1d41091f3a38cc3aff9fd71766c1898946f1","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-01-23 20:52:56.000000000","message":"Patch Set 35: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/20620/ : FAILURE","accounts_in_message":[],"_revision_number":35},{"id":"881ea88f57f1df49e30f071544a997ab957d88b7","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-01-23 21:10:13.000000000","message":"Patch Set 36: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/20621/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit-build/19771/ : FAILURE","accounts_in_message":[],"_revision_number":36},{"id":"3e7ac4f5c69e615a90f7d1b483e69ed2571e0617","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-23 21:43:12.000000000","message":"Uploaded patch set 37: New patch set was added with same tree, parent tree, and commit message as Patch Set 36.\n\nCopied Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":37},{"id":"9a394aeae5ce3f72c1b9f941a50cb17ca15931fd","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-23 21:44:27.000000000","message":"Uploaded patch set 38.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":38},{"id":"ff14574ccdf6020b490faf5bfa88724dc592c187","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-01-23 21:44:30.000000000","message":"Patch Set 37: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit/20622/ : ABORTED\n\nhttps://build.openocd.org/job/openocd-gerrit-build/19772/ : ABORTED","accounts_in_message":[],"_revision_number":37},{"id":"5b12f08c676eb1886b55ae99cafd548e65d558e5","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-01-23 22:10:23.000000000","message":"Patch Set 38: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/20623/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/19773/ : SUCCESS","accounts_in_message":[],"_revision_number":38},{"id":"c423ba6f4a68bd9cca1b4cc70617a0b1e32068fc","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-24 00:46:42.000000000","message":"Uploaded patch set 39.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":39},{"id":"e2e131bab08a202b43701ca49284c22f128c7a24","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-01-24 01:04:09.000000000","message":"Patch Set 39: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/20624/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/19774/ : SUCCESS","accounts_in_message":[],"_revision_number":39},{"id":"b09c52528c7429e290feb40b9ac1a8d7dfb13bef","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-24 01:13:03.000000000","message":"Patch Set 39:\n\n(8 comments)","accounts_in_message":[],"_revision_number":39},{"id":"9286b24af2c80a6d8ae83d723a51da16668405f4","author":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"real_author":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"date":"2025-01-24 08:54:47.000000000","message":"Patch Set 39: Code-Review-1\n\n(1 comment)","accounts_in_message":[],"_revision_number":39},{"id":"30bf9ea65f847e85d7cd66ee25caa75fee292d7e","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-24 16:24:41.000000000","message":"Uploaded patch set 40.\n\nOutdated Votes:\n* Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":40},{"id":"e43e3550593aa8550da37ba57c1b5f4fbc3d34fe","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-24 16:28:57.000000000","message":"Patch Set 40:\n\n(1 comment)","accounts_in_message":[],"_revision_number":40},{"id":"f238714c18acfefa817afc25ab0445c6fd69cfd1","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-01-24 16:39:12.000000000","message":"Patch Set 40:\n\n(1 comment)","accounts_in_message":[],"_revision_number":40},{"id":"9543ed4b640b19972a1206f8165ca1ce735bd886","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-01-24 16:41:05.000000000","message":"Patch Set 40: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/20625/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/19775/ : SUCCESS","accounts_in_message":[],"_revision_number":40},{"id":"0a3f86536eefd7f5cad4b6685d00beca84d8731c","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-24 22:17:22.000000000","message":"Uploaded patch set 41.\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":41},{"id":"1e7e60ed28a4bd66a0312d9d560bc26c54c5dfa1","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-01-24 22:32:56.000000000","message":"Patch Set 41: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/20626/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/19776/ : SUCCESS","accounts_in_message":[],"_revision_number":41},{"id":"ac1eee8368ed73a81927959544e3d84db535a427","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-24 22:39:17.000000000","message":"Patch Set 41: Code-Review+1\n\n(3 comments)\n\nThis change is ready for review.","accounts_in_message":[],"_revision_number":41},{"id":"55ef5001e99420d15cd07000bc54313bddf92ed5","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-01-25 06:51:10.000000000","message":"Patch Set 41: Code-Review-1\n\n(1 comment)","accounts_in_message":[],"_revision_number":41},{"id":"ed9b2238ddd0028ab7f2de5b0c90f395c4a71d00","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-25 08:26:10.000000000","message":"Uploaded patch set 42.\n\nOutdated Votes:\n* Code-Review+1, Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":42},{"id":"d323b7bc8f121404c01f42afee95e330574a3951","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-01-25 08:44:39.000000000","message":"Patch Set 42: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/20627/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/19777/ : SUCCESS","accounts_in_message":[],"_revision_number":42},{"id":"264d47bce57728252bd177bcec279be5cee3e137","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-25 09:52:21.000000000","message":"Patch Set 42: Code-Review+1\n\n(1 comment)","accounts_in_message":[],"_revision_number":42},{"id":"b98a01b7f4454d39a342eef832c8b6f063ff4d7d","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2025-01-25 17:47:58.000000000","message":"Patch Set 42:\n\n(14 comments)","accounts_in_message":[],"_revision_number":42},{"id":"9240c391d2a1fd8be690d0e8de9a141e5b79c434","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-01-26 12:43:29.000000000","message":"Patch Set 42:\n\n(8 comments)","accounts_in_message":[],"_revision_number":42},{"id":"d98e88f2b8e9cd34da81742a6fceb0489ba93a1c","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-01-26 12:46:23.000000000","message":"Patch Set 42: Code-Review-1\n\n(1 comment)","accounts_in_message":[],"_revision_number":42},{"id":"886232541c97453eeaa779549635edfc8a042222","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-27 18:37:44.000000000","message":"Uploaded patch set 43.\n\nOutdated Votes:\n* Code-Review+1, Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":43},{"id":"080282b008620fabf5ab26d28e7b2d129b524e1f","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-01-27 18:52:09.000000000","message":"Patch Set 43: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit/20656/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit-build/19806/ : SUCCESS","accounts_in_message":[],"_revision_number":43},{"id":"8bdba3b9786b1a8268bc85e123afc7a2e987f27d","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-01-27 19:55:58.000000000","message":"Patch Set 43: Code-Review+1\n\n(21 comments)","accounts_in_message":[],"_revision_number":43},{"id":"e4d557755ac864d37475ff9f83a5107613c61222","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-01-27 21:13:43.000000000","message":"Patch Set 43: Code-Review+1\n\n(2 comments)","accounts_in_message":[],"_revision_number":43},{"id":"923ed63a235206bded35b7dac13040d4ddd9f5d6","author":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"real_author":{"_account_id":1000410,"name":"Oleksij Rempel","email":"linux@rempel-privat.de","username":"olerem"},"date":"2025-01-28 07:19:05.000000000","message":"Patch Set 43: Code-Review+1","accounts_in_message":[],"_revision_number":43},{"id":"4fc5be0b8bb226886d856cc8d916244d34eedbcf","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2025-02-06 01:47:23.000000000","message":"Patch Set 43:\n\n(1 comment)","accounts_in_message":[],"_revision_number":43},{"id":"7f99bf6036234d717284bb0608964766046ca1db","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-02-08 16:39:40.000000000","message":"Patch Set 43:\n\n(1 comment)","accounts_in_message":[],"_revision_number":43},{"id":"6274312748b870eef050863a75a6a033a847cf96","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-02-08 22:55:50.000000000","message":"Patch Set 43:\n\n(2 comments)","accounts_in_message":[],"_revision_number":43},{"id":"834f0df9cc2bee555cabef14e22ac496b906caf4","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-02-09 00:21:06.000000000","message":"Patch Set 43:\n\n(1 comment)","accounts_in_message":[],"_revision_number":43},{"id":"0c1afdd8f1843c5f2d50840d5e09ced704937eb3","author":{"_account_id":1002298,"name":"Marek Kraus","email":"gamelaster@outlook.com","username":"gamelaster"},"real_author":{"_account_id":1002298,"name":"Marek Kraus","email":"gamelaster@outlook.com","username":"gamelaster"},"date":"2025-03-02 14:43:41.000000000","message":"Patch Set 43:\n\n(1 comment)","accounts_in_message":[],"_revision_number":43},{"id":"b353fc60208e6b78b0a0707e747ea2913adb998a","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-03-05 21:32:31.000000000","message":"Patch Set 43: Code-Review-1\n\n(2 comments)","accounts_in_message":[],"_revision_number":43},{"id":"77fc3bf3b58537b4a7e013167f198ca0ace4b888","author":{"_account_id":1002364,"name":"Deomid Ryabkov","username":"rojer"},"real_author":{"_account_id":1002364,"name":"Deomid Ryabkov","username":"rojer"},"date":"2025-04-09 13:50:03.000000000","message":"Patch Set 43:\n\n(1 comment)","accounts_in_message":[],"_revision_number":43},{"id":"97f2eeeefd16f649819632ca394464a7dbb732f4","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2025-05-26 11:05:11.000000000","message":"Patch Set 43:\n\n(1 comment)","accounts_in_message":[],"_revision_number":43},{"id":"90ce88df0ac7321b65304725be4f377503314063","author":{"_account_id":1002429,"name":"Danielle Church","username":"dmchurch"},"real_author":{"_account_id":1002429,"name":"Danielle Church","username":"dmchurch"},"date":"2025-07-30 21:09:38.000000000","message":"Patch Set 43:\n\n(1 comment)","accounts_in_message":[],"_revision_number":43},{"id":"c04e1813ad7ae69920b88107c92ac656b7419a35","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-08-01 07:52:21.000000000","message":"Patch Set 43:\n\n(1 comment)","accounts_in_message":[],"_revision_number":43},{"id":"b170a3452b2b9825e90bbb7b72a64ade01b23062","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-03 22:11:26.000000000","message":"Patch Set 44: Published edit on patch set 43.\n\nOutdated Votes:\n* Code-Review+1, Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":44},{"id":"f8763b3d028e6079bcbeb516f375c4516a525a82","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-08-03 22:28:23.000000000","message":"Patch Set 44: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit-build/20690/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit/21557/ : SUCCESS","accounts_in_message":[],"_revision_number":44},{"id":"8a1067eb84469fa826379d785bfa848a847930f9","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-03 22:28:53.000000000","message":"Patch Set 45: Patch Set 44 was rebased\n\nThe following files contain Git conflicts:\n* src/jtag/interfaces.c\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":45},{"id":"8a0505c35d57784498834021d0ba405388c00b1e","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-08-03 22:30:15.000000000","message":"Patch Set 45: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/20691/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit/21558/ : FAILURE","accounts_in_message":[],"_revision_number":45},{"id":"6ec5a69a0802d3f8dd05f62d44e76cbbdb953588","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-03 22:30:41.000000000","message":"Patch Set 46: Published edit on patch set 45.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":46},{"id":"51965d7c3dc57e672a86008e05d4424db9a829d9","tag":"autogenerated:gerrit:setReadyForReview","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-03 22:32:22.000000000","message":"Set Ready For Review","accounts_in_message":[],"_revision_number":46},{"id":"259312f5b4c1dc6b584bf89c18484b0f6f1c6ad5","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-08-03 22:36:12.000000000","message":"Patch Set 46: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/20692/ : FAILURE\n\nhttps://build.openocd.org/job/openocd-gerrit/21559/ : FAILURE","accounts_in_message":[],"_revision_number":46},{"id":"676e49404a57f18b938beba33a75015ca0c9bfcf","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-03 23:38:32.000000000","message":"Patch Set 47: Published edit on patch set 46.\n\nOutdated Votes:\n* Verified-1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":47},{"id":"c7a66cb769e16f22e5add13727bac4d70be3c332","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-08-04 00:09:17.000000000","message":"Patch Set 47: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit-build/20693/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit/21560/ : SUCCESS","accounts_in_message":[],"_revision_number":47},{"id":"4b999261e31130223ee04e287ee365541b12941e","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-04 00:10:17.000000000","message":"Patch Set 47:\n\n(3 comments)","accounts_in_message":[],"_revision_number":47},{"id":"8a563140e4be2ecbba2f6a077b7b015735e19906","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-08-04 07:35:51.000000000","message":"Patch Set 47: Code-Review-1\n\n(4 comments)","accounts_in_message":[],"_revision_number":47},{"id":"f352aabe7cf169d83f3d73e68299569d00d730b3","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2025-08-04 08:13:25.000000000","message":"Patch Set 47:\n\n(2 comments)","accounts_in_message":[],"_revision_number":47},{"id":"3d000e1844195bbdd984e6462c33dfec558521f3","author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"real_author":{"_account_id":1000021,"name":"Antonio Borneo","email":"borneo.antonio@gmail.com","username":"borneoa"},"date":"2025-08-04 09:30:04.000000000","message":"Patch Set 47:\n\n(1 comment)","accounts_in_message":[],"_revision_number":47},{"id":"6952199bd2b9f830bf801d1e19d9370f2d48ed62","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-08-04 10:12:55.000000000","message":"Patch Set 47:\n\n(3 comments)","accounts_in_message":[],"_revision_number":47},{"id":"8b7c70cd1e84200493b2aba2cd53b87d678bb065","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-04 19:41:43.000000000","message":"Uploaded patch set 48.\n\nOutdated Votes:\n* Code-Review-1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":48},{"id":"04a4bd23523e7d84273859d493b47f3a848d0fdc","tag":"autogenerated:gerrit:setWorkInProgress","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-04 19:43:58.000000000","message":"Set Work In Progress","accounts_in_message":[],"_revision_number":48},{"id":"f5a239e95404b7334f3be1a20570e9c3b5e4a310","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-04 19:47:17.000000000","message":"Uploaded patch set 49.","accounts_in_message":[],"_revision_number":49},{"id":"0b97a2e0456ef34e241cd3ac2d5d1a2b80007e1b","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-08-04 19:47:20.000000000","message":"Patch Set 48: Verified-1\n\nBuild Failed \n\nhttps://build.openocd.org/job/openocd-gerrit-build/20707/ : ABORTED\n\nhttps://build.openocd.org/job/openocd-gerrit/21574/ : SUCCESS","accounts_in_message":[],"_revision_number":48},{"id":"143d39a599cdc0c340013a0e36d61cd5eb093cc5","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-08-04 20:04:06.000000000","message":"Patch Set 49: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit-build/20708/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit/21575/ : SUCCESS","accounts_in_message":[],"_revision_number":49},{"id":"72ec615b131934e3e9ed36e3a51e5a6aa5f15332","tag":"autogenerated:gerrit:newWipPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-04 20:04:29.000000000","message":"Patch Set 50: Patch Set 49 was rebased\n\nOutdated Votes:\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":50},{"id":"67c1665c5acf6116eb4459226e70b9624f208c10","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-08-04 20:21:44.000000000","message":"Patch Set 50: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit-build/20709/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit/21576/ : SUCCESS","accounts_in_message":[],"_revision_number":50},{"id":"1cae66fb988fd51620097c322c6d4ceb99c0d489","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-04 20:27:45.000000000","message":"Patch Set 50:\n\n(5 comments)\n\nThis change is ready for review.","accounts_in_message":[],"_revision_number":50},{"id":"5e72783fb06dcc07ab87c612e28146daeb189c01","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-05 18:42:52.000000000","message":"Patch Set 50: Code-Review+1\n\n(1 comment)","accounts_in_message":[],"_revision_number":50},{"id":"6ddb3c1cfa1c0893a38dd232dd3c282f0967b109","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-08-05 20:24:36.000000000","message":"Patch Set 50:\n\n(1 comment)","accounts_in_message":[],"_revision_number":50},{"id":"d45b2c6262bf411968576c8c3d0281683fbe67f5","tag":"autogenerated:gerrit:newPatchSet","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-05 21:48:48.000000000","message":"Uploaded patch set 51.\n\nOutdated Votes:\n* Code-Review+1 (copy condition: \"changekind:NO_CHANGE OR is:MIN\")\n* Verified+1 (copy condition: \"changekind:NO_CHANGE\")\n","accounts_in_message":[],"_revision_number":51},{"id":"9cb05028deaa14361bd2135fef67b910dc689c12","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-05 21:51:49.000000000","message":"Patch Set 51: Code-Review+1\n\n(1 comment)","accounts_in_message":[],"_revision_number":51},{"id":"a5e51e8569683fa819069fa952bcac4229f5cd90","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-05 21:53:49.000000000","message":"Patch Set 51:\n\n(1 comment)","accounts_in_message":[],"_revision_number":51},{"id":"726b9d306a6321948986b6a7f99e327dc6f89e3c","tag":"autogenerated:jenkins-gerrit-trigger","author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"real_author":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]},"date":"2025-08-05 22:05:18.000000000","message":"Patch Set 51: Verified+1\n\nBuild Successful \n\nhttps://build.openocd.org/job/openocd-gerrit-build/20726/ : SUCCESS\n\nhttps://build.openocd.org/job/openocd-gerrit/21593/ : SUCCESS","accounts_in_message":[],"_revision_number":51},{"id":"731b737c288237429d8927d934152126a93cec5e","author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"real_author":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"date":"2025-08-06 06:49:35.000000000","message":"Patch Set 51: Code-Review+1","accounts_in_message":[],"_revision_number":51},{"id":"5fd793b6a9e8fe4e2b41a0934d50fdc009d8be75","author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"real_author":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"date":"2025-08-07 22:06:18.000000000","message":"Patch Set 51:\n\n(1 comment)","accounts_in_message":[],"_revision_number":51},{"id":"1fdf2adaabfd6c3652c7290a70cb83ffb823aec8","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-08-14 13:38:12.000000000","message":"Patch Set 51: Code-Review+2","accounts_in_message":[],"_revision_number":51},{"id":"aef61945ac10706e05d02e6c982d1339953db7ff","tag":"autogenerated:gerrit:merged","author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"real_author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"date":"2025-08-24 05:02:38.000000000","message":"Change has been successfully cherry-picked as 7d0e125896291e7683f76aa1ad10532bb192692b","accounts_in_message":[],"_revision_number":52}],"current_revision":"7d0e125896291e7683f76aa1ad10532bb192692b","revisions":{"a9826e56d5a9dfa5931926aa178d0b982f5caf56":{"kind":"REWORK","_number":22,"created":"2023-10-26 22:08:15.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/22","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/22","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/22 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/22 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/22 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/22 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/22","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/22 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-26 22:06:37.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"e03a1685dd4a0e318adc2479a9fd3682c8435ff7":{"kind":"REWORK","_number":23,"created":"2023-10-27 23:12:12.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/23","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/23","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/23 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/23 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/23 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/23 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/23","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/23 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-27 23:10:58.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"90874db420f240fb911d21bc005c019a13306254":{"kind":"REWORK","_number":20,"created":"2023-10-26 14:06:06.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/20","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/20","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/20 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/20 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/20 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/20 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/20","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/20 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-26 14:04:51.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"33181fcad6e25189e2c78d444342e1ae41281dd8":{"kind":"NO_CHANGE","_number":21,"created":"2023-10-26 22:04:25.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/21","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/21","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/21 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/21 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/21 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/21 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/21","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/21 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-26 21:54:19.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"71594e73e8d157a6e6895707b6ad6339d4c3ab3d":{"kind":"REWORK","_number":18,"created":"2023-10-25 22:58:13.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/18","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/18","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/18 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/18 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/18 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/18 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/18","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/18 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-25 22:58:01.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"f1d17d8a22c67056ba01ca33659036f4a894a704":{"kind":"REWORK","_number":19,"created":"2023-10-25 23:14:41.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/19","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/19","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/19 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/19 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/19 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/19 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/19","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/19 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-25 23:14:12.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"f480ea9dd895dcebeff2069e00938f30d17144f0":{"kind":"NO_CHANGE","_number":16,"created":"2023-10-25 21:52:44.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/16","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/16","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/16 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/16 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/16 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/16 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/16","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/16 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-25 21:52:35.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"5685bc1ab04de127b9ac6cef94646d4a6cc6c09c":{"kind":"REWORK","_number":17,"created":"2023-10-25 22:54:06.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/17","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/17","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/17 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/17 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/17 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/17 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/17","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/17 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-25 22:53:46.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"4b1736cf2db64eb55ccd6c7a441552e416f7de49":{"kind":"REWORK","_number":30,"created":"2023-11-11 23:04:22.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/30","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/30","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/30 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/30 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/30 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/30 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/30","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/30 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2023-11-11 23:04:22.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"480304cfc1a0f47752d2867ffd07e889c6195dca":{"kind":"REWORK","_number":31,"created":"2023-12-07 03:43:32.000000000","uploader":{"_account_id":1002199,"name":"ZhiYuanNJ","display_name":" ZhiYuanNJ","email":"871238103@qq.com","username":"ZhiYuanNJ"},"ref":"refs/changes/37/7937/31","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/31","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/31 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/31 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/31 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/31 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/31","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/31 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"ZhiYuanNJ","email":"871238103@qq.com","date":"2023-12-07 03:43:29.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"e44b0b5c6b37c589194efaa9263e18ebc3b85c1d":{"kind":"REWORK","_number":28,"created":"2023-11-09 21:42:51.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/28","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/28","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/28 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/28 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/28 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/28 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/28","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/28 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-11-09 21:42:09.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"7dda8f2637f1a279cd8e243db271391c4046a8ac":{"kind":"REWORK","_number":29,"created":"2023-11-11 22:46:32.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/29","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/29","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/29 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/29 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/29 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/29 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/29","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/29 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-11-11 22:45:26.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"218767764ee3f2c052f19eeafa1eccf55af090ac":{"kind":"REWORK","_number":26,"created":"2023-11-03 21:18:27.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/26","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/26","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/26 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/26 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/26 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/26 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/26","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/26 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-11-03 21:09:57.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"8c1ec6ae4c730cc42f924fe849c4c4e19983c680":{"kind":"REWORK","_number":27,"created":"2023-11-05 23:56:53.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/27","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/27","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/27 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/27 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/27 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/27 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/27","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/27 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-11-05 23:56:09.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"0015003e227c575386cef55026d9addf1839a974":{"kind":"REWORK","_number":24,"created":"2023-10-27 23:48:10.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/24","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/24","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/24 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/24 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/24 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/24 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/24","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/24 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-27 23:40:40.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"6964fcbab09135cd0e233e1ef2c797ff99ee3a23":{"kind":"REWORK","_number":25,"created":"2023-11-03 21:05:13.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/25","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/25","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/25 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/25 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/25 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/25 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/25","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/25 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-11-03 21:03:25.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"980116f2fb20c00a6c1a5b7ac3c9f7c434e875c1":{"kind":"TRIVIAL_REBASE","_number":6,"created":"2023-10-15 21:30:51.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/6","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/6","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/6 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/6 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/6 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/6 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/6","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/6 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"c7d1f0ddabb301e00738686671b939bb92a06ed9","subject":"target: check if target is not examined on reg command"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-15 21:29:50.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"41be5763ac15c79c41935adff7f0bb758dca85da":{"kind":"REWORK","_number":7,"created":"2023-10-15 21:41:12.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/7","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/7","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/7 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/7 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/7 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/7 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/7","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/7 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"c7d1f0ddabb301e00738686671b939bb92a06ed9","subject":"target: check if target is not examined on reg command"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-15 21:40:44.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"4c960dc8be7cb621f36ca5d50018a980929fe63b":{"kind":"REWORK","_number":4,"created":"2023-10-15 19:53:54.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/4","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/4","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/4 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/4 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/4 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/4 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/4","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/4 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"c7d1f0ddabb301e00738686671b939bb92a06ed9","subject":"target: check if target is not examined on reg command"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-15 19:53:14.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"334f15d512c5dc7605ead6eb3a6ae873f596f048":{"kind":"TRIVIAL_REBASE","_number":5,"created":"2023-10-15 19:59:15.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/5","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/5","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/5 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/5 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/5 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/5 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/5","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/5 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2023-10-15 19:59:15.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"},"description":"Rebase"},"abfee6a101277aec834af21c7a17181d0e9fdbb3":{"kind":"REWORK","_number":2,"created":"2023-10-14 22:11:56.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/2","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/2","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/2 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/2 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/2 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/2 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/2","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/2 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"c7d1f0ddabb301e00738686671b939bb92a06ed9","subject":"target: check if target is not examined on reg command"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 22:11:13.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"80f252ea7a196b2a9043284119b9a737d19a9c47":{"kind":"REWORK","_number":3,"created":"2023-10-14 23:16:12.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/3","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/3","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/3 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/3 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/3 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/3 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/3","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/3 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"c7d1f0ddabb301e00738686671b939bb92a06ed9","subject":"target: check if target is not examined on reg command"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 23:15:51.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"3decb3ac11b98a52ed9fdc346d55581676d8850d":{"kind":"REWORK","_number":1,"created":"2023-10-14 16:23:59.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/1","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/1","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/1 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/1 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/1 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/1 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/1","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/1 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"c7d1f0ddabb301e00738686671b939bb92a06ed9","subject":"target: check if target is not examined on reg command"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 16:23:24.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. In jtag_libusb_open I\u0027ve\nadded a parameter for delivering the device description for which this\nfunction should search and adjusted all callers of this function.\nFinally I\u0027ve added the new ch347 driver in the build files.\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"0ca697f35ac10ba1b2056c92d24d0324c38e28b3":{"kind":"NO_CHANGE","_number":14,"created":"2023-10-25 21:07:35.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/14","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/14","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/14 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/14 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/14 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/14 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/14","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/14 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-25 21:06:26.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"4fd4c5cb95d9b0663fc21ffe89d8b1dd411fcdf4":{"kind":"REWORK","_number":15,"created":"2023-10-25 21:37:15.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/15","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/15","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/15 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/15 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/15 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/15 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/15","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/15 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-25 21:21:14.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"ea128277d8dc77524af35c4b8b98c27b4d7f4d02":{"kind":"REWORK","_number":12,"created":"2023-10-17 22:47:40.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/12","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/12","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/12 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/12 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/12 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/12 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/12","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/12 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-17 22:47:20.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"6e957cd67533e3bbae85b605c8bdbb31091cf686":{"kind":"REWORK","_number":13,"created":"2023-10-20 21:49:56.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/13","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/13","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/13 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/13 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/13 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/13 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/13","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/13 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-20 21:48:56.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"0884f43370bdcfc1c416152f32137526ce99e21b":{"kind":"REWORK","_number":10,"created":"2023-10-17 14:38:56.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/10","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/10","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/10 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/10 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/10 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/10 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/10","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/10 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2023-10-17 14:38:53.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"aee48d03df866a6be002c4abf5c1f5f62caf0e50":{"kind":"NO_CHANGE","_number":11,"created":"2023-10-17 22:44:18.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/11","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/11","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/11 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/11 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/11 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/11 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/11","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/11 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-17 22:43:14.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"030493fcc1c40f83e8602303b743f2189fdd686d":{"kind":"TRIVIAL_REBASE","_number":8,"created":"2023-10-15 21:46:26.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/8","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/8","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/8 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/8 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/8 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/8 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/8","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/8 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2023-10-15 21:46:26.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"},"description":"Rebase"},"d76badfdf26d31f3af1f0f8efa7f764aa1a26036":{"kind":"REWORK","_number":9,"created":"2023-10-16 22:36:10.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/9","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/9","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/9 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/9 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/9 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/9 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/9","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/9 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-16 22:32:03.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347 chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347 chip for UART and JTAG.\nWith this change I add support for CH347 based JTAG adapters.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"7d0e125896291e7683f76aa1ad10532bb192692b":{"kind":"REWORK","_number":52,"created":"2025-08-24 05:02:38.000000000","uploader":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"ref":"refs/changes/37/7937/52","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/52","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/52 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/52 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/52 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/52 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/52","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/52 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"68b6d3ad477b45a54282571ebd4ed8a53cf7dd90","subject":"jtag/driver/angie: Update Angie probe driver"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Tomas Vanek","email":"vanekt@fbl.cz","date":"2025-08-24 05:02:38.000000000","tz":0},"subject":"jtag/drivers: Add support for CH347-based JTAG adapters","message":"jtag/drivers: Add support for CH347-based JTAG adapters\n\nThis adds general support for JTAG adapters based on the WCH CH347T and\nCH347F chips.\n\nThe CH347T must be configured in mode 3 to provide both UART and JTAG\ninterfaces. The CH347F exposes UART and JTAG directly. Similar to FTDI\nFT2232-based devices, the CH347T/F can be used for simultaneous UART and\nJTAG communication.\n\nThe ch347 driver code is based on:\n  https://github.com/WCHSoftGroup/ch347\n\nBug fixes and adjustments were made to align the code with OpenOCD style\nand ensure compatibility. The driver was integrated into the OpenOCD\nbuild system.\n\nThe USB packet format was identified using public GitHub sources and\ndocumented here:\n  https://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\nReviewed-on: https://review.openocd.org/c/openocd/+/7937\nTested-by: jenkins\nReviewed-by: ZhiYuanNJ \u003c871238103@qq.com\u003e\nReviewed-by: Tomas Vanek \u003cvanekt@fbl.cz\u003e\n"}},"4be52f9b0515b4b9c09f0c679a236b907a854079":{"kind":"TRIVIAL_REBASE","_number":50,"created":"2025-08-04 20:04:29.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/50","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/50","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/50 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/50 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/50 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/50 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/50","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/50 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"66ea461846a3a4a96687c9287c3f61ae8ce0b775","subject":"drivers/cmsis_dap: fix segfault in quirk mode setting"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2025-08-04 20:04:29.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"},"description":"Rebase"},"073da5c0d542d7d608988c5eb5cad63e9b19a717":{"kind":"REWORK","_number":51,"created":"2025-08-05 21:48:48.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/51","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/51","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/51 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/51 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/51 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/51 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/51","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/51 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"6bc2c585960d57c40792d072b38da0834d1e72f9","subject":"configure.ac: Remove useless --enable-verbose-usb-io"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2025-08-05 21:47:12.000000000","tz":120},"subject":"jtag/drivers: Add support for CH347-based JTAG adapters","message":"jtag/drivers: Add support for CH347-based JTAG adapters\n\nThis adds general support for JTAG adapters based on the WCH CH347T and\nCH347F chips.\n\nThe CH347T must be configured in mode 3 to provide both UART and JTAG\ninterfaces. The CH347F exposes UART and JTAG directly. Similar to FTDI\nFT2232-based devices, the CH347T/F can be used for simultaneous UART and\nJTAG communication.\n\nThe ch347 driver code is based on:\n  https://github.com/WCHSoftGroup/ch347\n\nBug fixes and adjustments were made to align the code with OpenOCD style\nand ensure compatibility. The driver was integrated into the OpenOCD\nbuild system.\n\nThe USB packet format was identified using public GitHub sources and\ndocumented here:\n  https://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"0771b873f1489ab44e6da1d245e3ad03e50cb300":{"kind":"REWORK","_number":48,"created":"2025-08-04 19:41:43.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/48","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/48","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/48 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/48 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/48 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/48 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/48","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/48 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"6bc2c585960d57c40792d072b38da0834d1e72f9","subject":"configure.ac: Remove useless --enable-verbose-usb-io"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2025-08-04 19:41:08.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"a8f949b05727e267d725deb89a57c65683d2f784":{"kind":"REWORK","_number":49,"created":"2025-08-04 19:47:17.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/49","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/49","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/49 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/49 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/49 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/49 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/49","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/49 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"6bc2c585960d57c40792d072b38da0834d1e72f9","subject":"configure.ac: Remove useless --enable-verbose-usb-io"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2025-08-04 19:46:48.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"01478efc31e29aedb111d73d6295f5539f766c77":{"kind":"REWORK","_number":38,"created":"2025-01-23 21:44:27.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/38","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/38","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/38 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/38 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/38 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/38 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/38","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/38 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"83e0293f7ba3604b4ad98b3a8101388e3e52f9fe","subject":"Add Linux SPI device SWD adapter support"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2025-01-23 21:44:00.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"4444a994268e09fd0f8fdb22b388c61bd09c3dce":{"kind":"REWORK","_number":39,"created":"2025-01-24 00:46:42.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/39","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/39","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/39 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/39 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/39 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/39 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/39","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/39 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"83e0293f7ba3604b4ad98b3a8101388e3e52f9fe","subject":"Add Linux SPI device SWD adapter support"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2025-01-24 00:46:01.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"9e7b25075c759fb3a22ce1303a053b29bbd98370":{"kind":"REWORK","_number":36,"created":"2025-01-23 20:52:47.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/36","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/36","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/36 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/36 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/36 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/36 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/36","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/36 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"83e0293f7ba3604b4ad98b3a8101388e3e52f9fe","subject":"Add Linux SPI device SWD adapter support"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2025-01-23 20:52:39.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"7bf5e600a0d4414e910a077260b88853f5e1a0f5":{"kind":"NO_CHANGE","_number":37,"created":"2025-01-23 21:43:12.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/37","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/37","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/37 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/37 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/37 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/37 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/37","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/37 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"83e0293f7ba3604b4ad98b3a8101388e3e52f9fe","subject":"Add Linux SPI device SWD adapter support"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2025-01-23 21:42:39.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"8b8a98bc7263f2f0dc189bcdd17d9ac0441135e3":{"kind":"REWORK","_number":34,"created":"2024-04-28 19:37:27.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/34","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/34","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/34 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/34 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/34 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/34 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/34","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/34 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2024-04-28 19:36:33.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"a437c46ce8382a9a9aa61a4a0b1d1e0d85799443":{"kind":"REWORK","_number":35,"created":"2025-01-23 20:50:58.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/35","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/35","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/35 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/35 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/35 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/35 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/35","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/35 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"83e0293f7ba3604b4ad98b3a8101388e3e52f9fe","subject":"Add Linux SPI device SWD adapter support"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2025-01-23 20:50:58.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"},"description":"Rebase"},"0cde820cb176f2753b5570375533a5d2315badba":{"kind":"REWORK","_number":32,"created":"2024-04-12 20:59:47.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/32","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/32","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/32 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/32 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/32 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/32 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/32","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/32 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2024-04-12 20:57:52.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"fa17f1debf3ff63fec4bb2bcce71344c1bf33ef8":{"kind":"REWORK","_number":33,"created":"2024-04-12 21:33:12.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/33","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/33","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/33 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/33 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/33 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/33 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/33","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/33 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"25e1c8a937c3abf4e456c0671ad739b1171e25cf","subject":"jtag/drivers: Extension of jtag_libusb_open"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2024-04-12 21:32:54.000000000","tz":120},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"5423d8300cd1e7a967a9224fcf7e67e8da9bfd75":{"kind":"REWORK","_number":46,"created":"2025-08-03 22:30:41.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/46","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/46","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/46 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/46 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/46 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/46 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/46","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/46 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"6bc2c585960d57c40792d072b38da0834d1e72f9","subject":"configure.ac: Remove useless --enable-verbose-usb-io"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2025-08-03 22:30:41.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"1bbf0d26b5bbfde3c2a38eb2726b1a31383f61d7":{"kind":"REWORK","_number":47,"created":"2025-08-03 23:38:32.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/47","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/47","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/47 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/47 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/47 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/47 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/47","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/47 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"6bc2c585960d57c40792d072b38da0834d1e72f9","subject":"configure.ac: Remove useless --enable-verbose-usb-io"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2025-08-03 23:38:32.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"0cd600a44a856b790174740910ac3a787309d33c":{"kind":"REWORK","_number":44,"created":"2025-08-03 22:11:26.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/44","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/44","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/44 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/44 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/44 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/44 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/44","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/44 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"83e0293f7ba3604b4ad98b3a8101388e3e52f9fe","subject":"Add Linux SPI device SWD adapter support"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2025-08-03 22:11:26.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"73c2e57b5a1e30a25adff9dc14adb965f238caf1":{"kind":"REWORK","_number":45,"created":"2025-08-03 22:28:53.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/45","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/45","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/45 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/45 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/45 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/45 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/45","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/45 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"6bc2c585960d57c40792d072b38da0834d1e72f9","subject":"configure.ac: Remove useless --enable-verbose-usb-io"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"Matthias Jentsch","email":"info@easydevkits.com","date":"2025-08-03 22:28:53.000000000","tz":0},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"},"description":"Rebase"},"01ef6acee915c5be6bedf526620335a753be0fa5":{"kind":"REWORK","_number":42,"created":"2025-01-25 08:26:10.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/42","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/42","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/42 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/42 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/42 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/42 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/42","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/42 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"83e0293f7ba3604b4ad98b3a8101388e3e52f9fe","subject":"Add Linux SPI device SWD adapter support"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2025-01-25 08:25:42.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"717005cb829f2e2c568a85a7388ab8db42c8b825":{"kind":"REWORK","_number":43,"created":"2025-01-27 18:37:44.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/43","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/43","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/43 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/43 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/43 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/43 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/43","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/43 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"83e0293f7ba3604b4ad98b3a8101388e3e52f9fe","subject":"Add Linux SPI device SWD adapter support"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2025-01-27 16:57:37.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"08acac09e70bef4d6e8dc5ccb106a72e85857114":{"kind":"REWORK","_number":40,"created":"2025-01-24 16:24:41.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/40","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/40","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/40 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/40 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/40 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/40 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/40","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/40 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"83e0293f7ba3604b4ad98b3a8101388e3e52f9fe","subject":"Add Linux SPI device SWD adapter support"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2025-01-24 16:24:15.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}},"6633e24d30c0f868535a5ec8ce86a8621c7a38c4":{"kind":"REWORK","_number":41,"created":"2025-01-24 22:17:22.000000000","uploader":{"_account_id":1002195,"name":"Matthias Jentsch","display_name":"EasyDevKits","email":"info@easydevkits.com","username":"EasyDevKits"},"ref":"refs/changes/37/7937/41","fetch":{"anonymous http":{"url":"https://review.openocd.org/openocd","ref":"refs/changes/37/7937/41","commands":{"Branch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/41 \u0026\u0026 git checkout -b change-7937 FETCH_HEAD","Checkout":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/41 \u0026\u0026 git checkout FETCH_HEAD","Cherry Pick":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/41 \u0026\u0026 git cherry-pick FETCH_HEAD","Format Patch":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/41 \u0026\u0026 git format-patch -1 --stdout FETCH_HEAD","Pull":"git pull https://review.openocd.org/openocd refs/changes/37/7937/41","Reset To":"git fetch https://review.openocd.org/openocd refs/changes/37/7937/41 \u0026\u0026 git reset --hard FETCH_HEAD"}}},"commit":{"parents":[{"commit":"83e0293f7ba3604b4ad98b3a8101388e3e52f9fe","subject":"Add Linux SPI device SWD adapter support"}],"author":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2023-10-14 14:28:59.000000000","tz":120},"committer":{"name":"EasyDevKits","email":"info@easydevkits.com","date":"2025-01-24 22:17:02.000000000","tz":60},"subject":"jtag/drivers: Add general support for CH347 based interfaces","message":"jtag/drivers: Add general support for CH347 based interfaces\n\nI found that there is no support for CH347 based JTAG adapters.\nA WCH CH347T chip in mode 3 has one UART and one JTAG interface.\nLike an FTDI FT2232 chip, you can use the CH347T chip for UART and JTAG.\nWith this change I add support for CH347T based JTAG adapters.\nThe WCH datasheet mention also a CH347F chip which wasn\u0027t available\nfor testing. So, this driver is only tested for CH347T chip.\nThe ch347 driver source code is adopted from\nhttps://github.com/WCHSoftGroup/ch347\nI\u0027ve done some bug fixing in the ch347 driver code to get it working\nand applied the openocd style guide to it. Finally I\u0027ve added the new\nch347 driver in the build files.\nI found the USB packet format by looking at public available\nsource code at GitHub and I\u0027ve documented here:\nhttps://www.easydevkits.com/wch-ch347-jtag-interface/\n\nChange-Id: I5fca9dd015111e4410fea029611fdeedbb228fdb\nSigned-off-by: EasyDevKits \u003cinfo@easydevkits.com\u003e\n"}}},"requirements":[],"submit_records":[{"rule_name":"gerrit~DefaultSubmitRule","status":"CLOSED","labels":[{"label":"Verified","status":"OK","applied_by":{"_account_id":1000014,"name":"jenkins","username":"jenkins","tags":["SERVICE_USER"]}},{"label":"Code-Review","status":"OK","applied_by":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"}}]}],"submit_requirements":[{"name":"Verified","status":"SATISFIED","is_legacy":true,"submittability_expression_result":{"expression":"label:Verified\u003dMAX -label:Verified\u003dMIN","fulfilled":true,"status":"PASS","passing_atoms":["label:Verified\u003dMAX","-label:Verified\u003dMIN"],"failing_atoms":[]}},{"name":"Code-Review","status":"SATISFIED","is_legacy":true,"submittability_expression_result":{"expression":"label:Code-Review\u003dMAX -label:Code-Review\u003dMIN","fulfilled":true,"status":"PASS","passing_atoms":["label:Code-Review\u003dMAX","-label:Code-Review\u003dMIN"],"failing_atoms":[]}}]}