)]}'
{"tcl/target/stm32wba5x.cfg":[{"author":{"_account_id":1002386,"name":"Ahmed Haoues","email":"ahmed.haoues@st.com","username":"ahmed-haoues"},"change_message_id":"b6377e86884e56f2d7fa4756281af494f87c7aaf","unresolved":true,"context_lines":[{"line_number":47,"context_line":"$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0"},{"line_number":48,"context_line":""},{"line_number":49,"context_line":"flash bank $_CHIPNAME.flash stm32l4x 0x08000000 0 0 0 $_TARGETNAME"},{"line_number":50,"context_line":"flash bank $_CHIPNAME.otp   stm32l4x 0x0bf90000 0 0 0 $_TARGETNAME"},{"line_number":51,"context_line":""},{"line_number":52,"context_line":"# Common knowledges tells JTAG speed should be \u003c\u003d F_CPU/6."},{"line_number":53,"context_line":"# F_CPU after reset is MSI 4MHz, so use F_JTAG \u003d 500 kHz to stay on"}],"source_content_type":"text/x-ttcn-cfg","patch_set":1,"id":"fd8de4b5_1c8d4ee2","line":50,"updated":"2025-12-31 10:43:28.000000000","message":"Also need to change otp_base in https://github.com/openocd-org/openocd/blob/4593222e857f4f74010e321267cd3a3a12c32740/src/flash/nor/stm32l4x.c#L757 to use the non-secure address\n\nFYI, I have added a new patch to fix fsize_add https://review.openocd.org/c/openocd/+/9357","commit_id":"ff214e8f44f8eda8115ca4002e7f1eb1cc03fd31"},{"author":{"_account_id":1002386,"name":"Ahmed Haoues","email":"ahmed.haoues@st.com","username":"ahmed-haoues"},"change_message_id":"17d45c3c4ff24686b2871f0cbd927e549357c39d","unresolved":false,"context_lines":[{"line_number":47,"context_line":"$_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size $_WORKAREASIZE -work-area-backup 0"},{"line_number":48,"context_line":""},{"line_number":49,"context_line":"flash bank $_CHIPNAME.flash stm32l4x 0x08000000 0 0 0 $_TARGETNAME"},{"line_number":50,"context_line":"flash bank $_CHIPNAME.otp   stm32l4x 0x0bf90000 0 0 0 $_TARGETNAME"},{"line_number":51,"context_line":""},{"line_number":52,"context_line":"# Common knowledges tells JTAG speed should be \u003c\u003d F_CPU/6."},{"line_number":53,"context_line":"# F_CPU after reset is MSI 4MHz, so use F_JTAG \u003d 500 kHz to stay on"}],"source_content_type":"text/x-ttcn-cfg","patch_set":1,"id":"a358c036_6cc74838","line":50,"in_reply_to":"fd8de4b5_1c8d4ee2","updated":"2026-01-07 08:50:25.000000000","message":"Done","commit_id":"ff214e8f44f8eda8115ca4002e7f1eb1cc03fd31"}]}