)]}'
{"/COMMIT_MSG":[{"author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"change_message_id":"fbcc33fd29b2ac5056b954ed47f9ccf2d4b115ba","unresolved":true,"context_lines":[{"line_number":7,"context_line":"tcl/target: restore power management on ATSAME5x after shutdown"},{"line_number":8,"context_line":""},{"line_number":9,"context_line":"This registers a shutdown handler to restore the power management on"},{"line_number":10,"context_line":"shutdown. This solves the issue that MCUs do not enter low power mode"},{"line_number":11,"context_line":"after OpenOCD connected until a power-on reset is performed."},{"line_number":12,"context_line":""},{"line_number":13,"context_line":"Change-Id: I623930461fd54c7182a45fe8bea76c509ddc5cd6"},{"line_number":14,"context_line":"Signed-off-by: Marian Buschsieweke \u003cmarian.buschsieweke@posteo.net\u003e"}],"source_content_type":"text/x-gerrit-commit-message","patch_set":1,"id":"376ae50a_505b0105","line":11,"range":{"start_line":10,"start_character":22,"end_line":11,"end_character":59},"updated":"2026-05-29 19:34:17.000000000","message":"This is not issue, it\u0027s standard behaviour.\nA power cycle is the recommended way to leave the debug without any unwanted debug mode residuals.","commit_id":"99b19d5517b145e6fb4f89fd57709641084708b8"}],"/PATCHSET_LEVEL":[{"author":{"_account_id":1000687,"name":"Tomas Vanek","display_name":"Tomas Vanek","email":"vanekt@fbl.cz","username":"vanekt"},"change_message_id":"fbcc33fd29b2ac5056b954ed47f9ccf2d4b115ba","unresolved":true,"context_lines":[],"source_content_type":"","patch_set":1,"id":"894d04f0_cfee4d14","updated":"2026-05-29 19:34:17.000000000","message":"Marian,\ndepowering debug region is common to all ARM Cortexes, no reason\nto deal with it on specific MCU.\n\nAlso please read the discussion about the similar topic in\n6093: cortex_m: clear halt debug enable bit in cortex_m_deinit_target() | https://review.openocd.org/c/openocd/+/6093\n\nI\u0027m not sure if depowering debug region is not an undefined behaviour without\nclearing DHCSR.DEBUGEN beforehand.","commit_id":"99b19d5517b145e6fb4f89fd57709641084708b8"}]}