1 /***************************************************************************
2 * Copyright (C) 2005, 2007 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
19 ***************************************************************************/
24 #include "replacements.h"
32 #include "algorithm.h"
33 #include "binarybuffer.h"
40 int cfi_register_commands(struct command_context_s
*cmd_ctx
);
41 int cfi_flash_bank_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
, struct flash_bank_s
*bank
);
42 int cfi_erase(struct flash_bank_s
*bank
, int first
, int last
);
43 int cfi_protect(struct flash_bank_s
*bank
, int set
, int first
, int last
);
44 int cfi_write(struct flash_bank_s
*bank
, u8
*buffer
, u32 offset
, u32 count
);
45 int cfi_probe(struct flash_bank_s
*bank
);
46 int cfi_auto_probe(struct flash_bank_s
*bank
);
47 int cfi_erase_check(struct flash_bank_s
*bank
);
48 int cfi_protect_check(struct flash_bank_s
*bank
);
49 int cfi_info(struct flash_bank_s
*bank
, char *buf
, int buf_size
);
51 int cfi_handle_part_id_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
);
53 #define CFI_MAX_BUS_WIDTH 4
54 #define CFI_MAX_CHIP_WIDTH 4
56 /* defines internal maximum size for code fragment in cfi_intel_write_block() */
57 #define CFI_MAX_INTEL_CODESIZE 256
59 flash_driver_t cfi_flash
=
62 .register_commands
= cfi_register_commands
,
63 .flash_bank_command
= cfi_flash_bank_command
,
65 .protect
= cfi_protect
,
68 .auto_probe
= cfi_auto_probe
,
69 .erase_check
= cfi_erase_check
,
70 .protect_check
= cfi_protect_check
,
74 cfi_unlock_addresses_t cfi_unlock_addresses
[] =
76 [CFI_UNLOCK_555_2AA
] = { .unlock1
= 0x555, .unlock2
= 0x2aa },
77 [CFI_UNLOCK_5555_2AAA
] = { .unlock1
= 0x5555, .unlock2
= 0x2aaa },
80 /* CFI fixups foward declarations */
81 void cfi_fixup_non_cfi(flash_bank_t
*flash
, void *param
);
82 void cfi_fixup_0002_erase_regions(flash_bank_t
*flash
, void *param
);
83 void cfi_fixup_0002_unlock_addresses(flash_bank_t
*flash
, void *param
);
84 void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t
*flash
, void *param
);
86 /* fixup after identifying JEDEC manufactuer and ID */
87 cfi_fixup_t cfi_jedec_fixups
[] = {
88 {CFI_MFR_SST
, 0x00D4, cfi_fixup_non_cfi
, NULL
},
89 {CFI_MFR_SST
, 0x00D5, cfi_fixup_non_cfi
, NULL
},
90 {CFI_MFR_SST
, 0x00D6, cfi_fixup_non_cfi
, NULL
},
91 {CFI_MFR_SST
, 0x00D7, cfi_fixup_non_cfi
, NULL
},
92 {CFI_MFR_SST
, 0x2780, cfi_fixup_non_cfi
, NULL
},
93 {CFI_MFR_ST
, 0x00D5, cfi_fixup_non_cfi
, NULL
},
94 {CFI_MFR_ST
, 0x00D6, cfi_fixup_non_cfi
, NULL
},
95 {CFI_MFR_AMD
, 0x2223, cfi_fixup_non_cfi
, NULL
},
96 {CFI_MFR_AMD
, 0x22ab, cfi_fixup_non_cfi
, NULL
},
100 /* fixup after reading cmdset 0002 primary query table */
101 cfi_fixup_t cfi_0002_fixups
[] = {
102 {CFI_MFR_SST
, 0x00D4, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
103 {CFI_MFR_SST
, 0x00D5, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
104 {CFI_MFR_SST
, 0x00D6, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
105 {CFI_MFR_SST
, 0x00D7, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
106 {CFI_MFR_SST
, 0x2780, cfi_fixup_0002_unlock_addresses
, &cfi_unlock_addresses
[CFI_UNLOCK_5555_2AAA
]},
107 {CFI_MFR_ATMEL
, 0x00C8, cfi_fixup_atmel_reversed_erase_regions
, NULL
},
108 {CFI_MFR_ANY
, CFI_ID_ANY
, cfi_fixup_0002_erase_regions
, NULL
},
112 /* fixup after reading cmdset 0001 primary query table */
113 cfi_fixup_t cfi_0001_fixups
[] = {
117 void cfi_fixup(flash_bank_t
*bank
, cfi_fixup_t
*fixups
)
119 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
122 for (f
= fixups
; f
->fixup
; f
++)
124 if (((f
->mfr
== CFI_MFR_ANY
) || (f
->mfr
== cfi_info
->manufacturer
)) &&
125 ((f
->id
== CFI_ID_ANY
) || (f
->id
== cfi_info
->device_id
)))
127 f
->fixup(bank
, f
->param
);
132 inline u32
flash_address(flash_bank_t
*bank
, int sector
, u32 offset
)
134 /* while the sector list isn't built, only accesses to sector 0 work */
136 return bank
->base
+ offset
* bank
->bus_width
;
141 ERROR("BUG: sector list not yet built");
144 return bank
->base
+ bank
->sectors
[sector
].offset
+ offset
* bank
->bus_width
;
149 void cfi_command(flash_bank_t
*bank
, u8 cmd
, u8
*cmd_buf
)
153 /* clear whole buffer, to ensure bits that exceed the bus_width
156 for (i
= 0; i
< CFI_MAX_BUS_WIDTH
; i
++)
159 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
161 for (i
= bank
->bus_width
; i
> 0; i
--)
163 *cmd_buf
++ = (i
& (bank
->chip_width
- 1)) ? 0x0 : cmd
;
168 for (i
= 1; i
<= bank
->bus_width
; i
++)
170 *cmd_buf
++ = (i
& (bank
->chip_width
- 1)) ? 0x0 : cmd
;
175 /* read unsigned 8-bit value from the bank
176 * flash banks are expected to be made of similar chips
177 * the query result should be the same for all
179 u8
cfi_query_u8(flash_bank_t
*bank
, int sector
, u32 offset
)
181 target_t
*target
= bank
->target
;
182 u8 data
[CFI_MAX_BUS_WIDTH
];
184 target
->type
->read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 1, data
);
186 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
189 return data
[bank
->bus_width
- 1];
192 /* read unsigned 8-bit value from the bank
193 * in case of a bank made of multiple chips,
194 * the individual values are ORed
196 u8
cfi_get_u8(flash_bank_t
*bank
, int sector
, u32 offset
)
198 target_t
*target
= bank
->target
;
199 u8 data
[CFI_MAX_BUS_WIDTH
];
202 target
->type
->read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 1, data
);
204 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
206 for (i
= 0; i
< bank
->bus_width
/ bank
->chip_width
; i
++)
214 for (i
= 0; i
< bank
->bus_width
/ bank
->chip_width
; i
++)
215 value
|= data
[bank
->bus_width
- 1 - i
];
221 u16
cfi_query_u16(flash_bank_t
*bank
, int sector
, u32 offset
)
223 target_t
*target
= bank
->target
;
224 u8 data
[CFI_MAX_BUS_WIDTH
* 2];
226 target
->type
->read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 2, data
);
228 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
229 return data
[0] | data
[bank
->bus_width
] << 8;
231 return data
[bank
->bus_width
- 1] | data
[(2 * bank
->bus_width
) - 1] << 8;
234 u32
cfi_query_u32(flash_bank_t
*bank
, int sector
, u32 offset
)
236 target_t
*target
= bank
->target
;
237 u8 data
[CFI_MAX_BUS_WIDTH
* 4];
239 target
->type
->read_memory(target
, flash_address(bank
, sector
, offset
), bank
->bus_width
, 4, data
);
241 if (bank
->target
->endianness
== TARGET_LITTLE_ENDIAN
)
242 return data
[0] | data
[bank
->bus_width
] << 8 | data
[bank
->bus_width
* 2] << 16 | data
[bank
->bus_width
* 3] << 24;
244 return data
[bank
->bus_width
- 1] | data
[(2* bank
->bus_width
) - 1] << 8 |
245 data
[(3 * bank
->bus_width
) - 1] << 16 | data
[(4 * bank
->bus_width
) - 1] << 24;
248 void cfi_intel_clear_status_register(flash_bank_t
*bank
)
250 target_t
*target
= bank
->target
;
253 if (target
->state
!= TARGET_HALTED
)
255 ERROR("BUG: attempted to clear status register while target wasn't halted");
259 cfi_command(bank
, 0x50, command
);
260 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
263 u8
cfi_intel_wait_status_busy(flash_bank_t
*bank
, int timeout
)
267 while ((!((status
= cfi_get_u8(bank
, 0, 0x0)) & 0x80)) && (timeout
-- > 0))
269 DEBUG("status: 0x%x", status
);
273 /* mask out bit 0 (reserved) */
274 status
= status
& 0xfe;
276 DEBUG("status: 0x%x", status
);
278 if ((status
& 0x80) != 0x80)
280 ERROR("timeout while waiting for WSM to become ready");
282 else if (status
!= 0x80)
284 ERROR("status register: 0x%x", status
);
286 ERROR("Block Lock-Bit Detected, Operation Abort");
288 ERROR("Program suspended");
290 ERROR("Low Programming Voltage Detected, Operation Aborted");
292 ERROR("Program Error / Error in Setting Lock-Bit");
294 ERROR("Error in Block Erasure or Clear Lock-Bits");
296 ERROR("Block Erase Suspended");
298 cfi_intel_clear_status_register(bank
);
304 int cfi_spansion_wait_status_busy(flash_bank_t
*bank
, int timeout
)
306 u8 status
, oldstatus
;
308 oldstatus
= cfi_get_u8(bank
, 0, 0x0);
311 status
= cfi_get_u8(bank
, 0, 0x0);
312 if ((status
^ oldstatus
) & 0x40) {
314 oldstatus
= cfi_get_u8(bank
, 0, 0x0);
315 status
= cfi_get_u8(bank
, 0, 0x0);
316 if ((status
^ oldstatus
) & 0x40) {
317 ERROR("dq5 timeout, status: 0x%x", status
);
318 return(ERROR_FLASH_OPERATION_FAILED
);
320 DEBUG("status: 0x%x", status
);
325 DEBUG("status: 0x%x", status
);
331 } while (timeout
-- > 0);
333 ERROR("timeout, status: 0x%x", status
);
335 return(ERROR_FLASH_BUSY
);
338 int cfi_read_intel_pri_ext(flash_bank_t
*bank
)
340 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
341 cfi_intel_pri_ext_t
*pri_ext
= malloc(sizeof(cfi_intel_pri_ext_t
));
342 target_t
*target
= bank
->target
;
345 cfi_info
->pri_ext
= pri_ext
;
347 pri_ext
->pri
[0] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0);
348 pri_ext
->pri
[1] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1);
349 pri_ext
->pri
[2] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2);
351 if ((pri_ext
->pri
[0] != 'P') || (pri_ext
->pri
[1] != 'R') || (pri_ext
->pri
[2] != 'I'))
353 cfi_command(bank
, 0xf0, command
);
354 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
355 cfi_command(bank
, 0xff, command
);
356 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
357 return ERROR_FLASH_BANK_INVALID
;
360 pri_ext
->major_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3);
361 pri_ext
->minor_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4);
363 DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext
->pri
[0], pri_ext
->pri
[1], pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
365 pri_ext
->feature_support
= cfi_query_u32(bank
, 0, cfi_info
->pri_addr
+ 5);
366 pri_ext
->suspend_cmd_support
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 9);
367 pri_ext
->blk_status_reg_mask
= cfi_query_u16(bank
, 0, cfi_info
->pri_addr
+ 0xa);
369 DEBUG("feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x", pri_ext
->feature_support
, pri_ext
->suspend_cmd_support
, pri_ext
->blk_status_reg_mask
);
371 pri_ext
->vcc_optimal
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xc);
372 pri_ext
->vpp_optimal
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xd);
374 DEBUG("Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x",
375 (pri_ext
->vcc_optimal
& 0xf0) >> 4, pri_ext
->vcc_optimal
& 0x0f,
376 (pri_ext
->vpp_optimal
& 0xf0) >> 4, pri_ext
->vpp_optimal
& 0x0f);
378 pri_ext
->num_protection_fields
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0xe);
379 if (pri_ext
->num_protection_fields
!= 1)
381 WARNING("expected one protection register field, but found %i", pri_ext
->num_protection_fields
);
384 pri_ext
->prot_reg_addr
= cfi_query_u16(bank
, 0, cfi_info
->pri_addr
+ 0xf);
385 pri_ext
->fact_prot_reg_size
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0x11);
386 pri_ext
->user_prot_reg_size
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0x12);
388 DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i", pri_ext
->num_protection_fields
, pri_ext
->prot_reg_addr
, 1 << pri_ext
->fact_prot_reg_size
, 1 << pri_ext
->user_prot_reg_size
);
393 int cfi_read_spansion_pri_ext(flash_bank_t
*bank
)
395 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
396 cfi_spansion_pri_ext_t
*pri_ext
= malloc(sizeof(cfi_spansion_pri_ext_t
));
397 target_t
*target
= bank
->target
;
400 cfi_info
->pri_ext
= pri_ext
;
402 pri_ext
->pri
[0] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0);
403 pri_ext
->pri
[1] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1);
404 pri_ext
->pri
[2] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2);
406 if ((pri_ext
->pri
[0] != 'P') || (pri_ext
->pri
[1] != 'R') || (pri_ext
->pri
[2] != 'I'))
408 cfi_command(bank
, 0xf0, command
);
409 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
410 return ERROR_FLASH_BANK_INVALID
;
413 pri_ext
->major_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3);
414 pri_ext
->minor_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4);
416 DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext
->pri
[0], pri_ext
->pri
[1], pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
418 pri_ext
->SiliconRevision
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 5);
419 pri_ext
->EraseSuspend
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 6);
420 pri_ext
->BlkProt
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 7);
421 pri_ext
->TmpBlkUnprotect
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 8);
422 pri_ext
->BlkProtUnprot
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 9);
423 pri_ext
->SimultaneousOps
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 10);
424 pri_ext
->BurstMode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 11);
425 pri_ext
->PageMode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 12);
426 pri_ext
->VppMin
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 13);
427 pri_ext
->VppMax
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 14);
428 pri_ext
->TopBottom
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 15);
430 DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x", pri_ext
->SiliconRevision
,
431 pri_ext
->EraseSuspend
, pri_ext
->BlkProt
);
433 DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, Simultaneous Ops: 0x%x", pri_ext
->TmpBlkUnprotect
,
434 pri_ext
->BlkProtUnprot
, pri_ext
->SimultaneousOps
);
436 DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext
->BurstMode
, pri_ext
->PageMode
);
439 DEBUG("Vpp min: %2.2d.%1.1d, Vpp max: %2.2d.%1.1x",
440 (pri_ext
->VppMin
& 0xf0) >> 4, pri_ext
->VppMin
& 0x0f,
441 (pri_ext
->VppMax
& 0xf0) >> 4, pri_ext
->VppMax
& 0x0f);
443 DEBUG("WP# protection 0x%x", pri_ext
->TopBottom
);
445 /* default values for implementation specific workarounds */
446 pri_ext
->_unlock1
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock1
;
447 pri_ext
->_unlock2
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock2
;
448 pri_ext
->_reversed_geometry
= 0;
453 int cfi_read_atmel_pri_ext(flash_bank_t
*bank
)
455 cfi_atmel_pri_ext_t atmel_pri_ext
;
456 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
457 cfi_spansion_pri_ext_t
*pri_ext
= malloc(sizeof(cfi_spansion_pri_ext_t
));
458 target_t
*target
= bank
->target
;
461 /* ATMEL devices use the same CFI primary command set (0x2) as AMD/Spansion,
462 * but a different primary extended query table.
463 * We read the atmel table, and prepare a valid AMD/Spansion query table.
466 memset(pri_ext
, 0, sizeof(cfi_spansion_pri_ext_t
));
468 cfi_info
->pri_ext
= pri_ext
;
470 atmel_pri_ext
.pri
[0] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 0);
471 atmel_pri_ext
.pri
[1] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 1);
472 atmel_pri_ext
.pri
[2] = cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 2);
474 if ((atmel_pri_ext
.pri
[0] != 'P') || (atmel_pri_ext
.pri
[1] != 'R') || (atmel_pri_ext
.pri
[2] != 'I'))
476 cfi_command(bank
, 0xf0, command
);
477 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
478 return ERROR_FLASH_BANK_INVALID
;
481 pri_ext
->pri
[0] = atmel_pri_ext
.pri
[0];
482 pri_ext
->pri
[1] = atmel_pri_ext
.pri
[1];
483 pri_ext
->pri
[2] = atmel_pri_ext
.pri
[2];
485 atmel_pri_ext
.major_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 3);
486 atmel_pri_ext
.minor_version
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 4);
488 DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext
.pri
[0], atmel_pri_ext
.pri
[1], atmel_pri_ext
.pri
[2], atmel_pri_ext
.major_version
, atmel_pri_ext
.minor_version
);
490 pri_ext
->major_version
= atmel_pri_ext
.major_version
;
491 pri_ext
->minor_version
= atmel_pri_ext
.minor_version
;
493 atmel_pri_ext
.features
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 5);
494 atmel_pri_ext
.bottom_boot
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 6);
495 atmel_pri_ext
.burst_mode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 7);
496 atmel_pri_ext
.page_mode
= cfi_query_u8(bank
, 0, cfi_info
->pri_addr
+ 8);
498 DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
499 atmel_pri_ext
.features
, atmel_pri_ext
.bottom_boot
, atmel_pri_ext
.burst_mode
, atmel_pri_ext
.page_mode
);
501 if (atmel_pri_ext
.features
& 0x02)
502 pri_ext
->EraseSuspend
= 2;
504 if (atmel_pri_ext
.bottom_boot
)
505 pri_ext
->TopBottom
= 2;
507 pri_ext
->TopBottom
= 3;
509 pri_ext
->_unlock1
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock1
;
510 pri_ext
->_unlock2
= cfi_unlock_addresses
[CFI_UNLOCK_555_2AA
].unlock2
;
515 int cfi_read_0002_pri_ext(flash_bank_t
*bank
)
517 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
519 if (cfi_info
->manufacturer
== CFI_MFR_ATMEL
)
521 return cfi_read_atmel_pri_ext(bank
);
525 return cfi_read_spansion_pri_ext(bank
);
529 int cfi_spansion_info(struct flash_bank_s
*bank
, char *buf
, int buf_size
)
532 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
533 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
535 printed
= snprintf(buf
, buf_size
, "\nSpansion primary algorithm extend information:\n");
539 printed
= snprintf(buf
, buf_size
, "pri: '%c%c%c', version: %c.%c\n", pri_ext
->pri
[0],
540 pri_ext
->pri
[1], pri_ext
->pri
[2],
541 pri_ext
->major_version
, pri_ext
->minor_version
);
545 printed
= snprintf(buf
, buf_size
, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
546 (pri_ext
->SiliconRevision
) >> 2,
547 (pri_ext
->SiliconRevision
) & 0x03);
551 printed
= snprintf(buf
, buf_size
, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
552 pri_ext
->EraseSuspend
,
557 printed
= snprintf(buf
, buf_size
, "VppMin: %2.2d.%1.1x, VppMax: %2.2d.%1.1x\n",
558 (pri_ext
->VppMin
& 0xf0) >> 4, pri_ext
->VppMin
& 0x0f,
559 (pri_ext
->VppMax
& 0xf0) >> 4, pri_ext
->VppMax
& 0x0f);
564 int cfi_intel_info(struct flash_bank_s
*bank
, char *buf
, int buf_size
)
567 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
568 cfi_intel_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
570 printed
= snprintf(buf
, buf_size
, "\nintel primary algorithm extend information:\n");
574 printed
= snprintf(buf
, buf_size
, "pri: '%c%c%c', version: %c.%c\n", pri_ext
->pri
[0], pri_ext
->pri
[1], pri_ext
->pri
[2], pri_ext
->major_version
, pri_ext
->minor_version
);
578 printed
= snprintf(buf
, buf_size
, "feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", pri_ext
->feature_support
, pri_ext
->suspend_cmd_support
, pri_ext
->blk_status_reg_mask
);
582 printed
= snprintf(buf
, buf_size
, "Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x\n",
583 (pri_ext
->vcc_optimal
& 0xf0) >> 4, pri_ext
->vcc_optimal
& 0x0f,
584 (pri_ext
->vpp_optimal
& 0xf0) >> 4, pri_ext
->vpp_optimal
& 0x0f);
588 printed
= snprintf(buf
, buf_size
, "protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i\n", pri_ext
->num_protection_fields
, pri_ext
->prot_reg_addr
, 1 << pri_ext
->fact_prot_reg_size
, 1 << pri_ext
->user_prot_reg_size
);
593 int cfi_register_commands(struct command_context_s
*cmd_ctx
)
595 /*command_t *cfi_cmd = */
596 register_command(cmd_ctx
, NULL
, "cfi", NULL
, COMMAND_ANY
, "flash bank cfi <base> <size> <chip_width> <bus_width> <targetNum> [jedec_probe/x16_as_x8]");
598 register_command(cmd_ctx, cfi_cmd, "part_id", cfi_handle_part_id_command, COMMAND_EXEC,
599 "print part id of cfi flash bank <num>");
604 /* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#> [options]
606 int cfi_flash_bank_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
, struct flash_bank_s
*bank
)
608 cfi_flash_bank_t
*cfi_info
;
613 WARNING("incomplete flash_bank cfi configuration");
614 return ERROR_FLASH_BANK_INVALID
;
617 if ((strtoul(args
[4], NULL
, 0) > CFI_MAX_CHIP_WIDTH
)
618 || (strtoul(args
[3], NULL
, 0) > CFI_MAX_BUS_WIDTH
))
620 ERROR("chip and bus width have to specified in bytes");
621 return ERROR_FLASH_BANK_INVALID
;
624 cfi_info
= malloc(sizeof(cfi_flash_bank_t
));
625 cfi_info
->probed
= 0;
626 bank
->driver_priv
= cfi_info
;
628 cfi_info
->write_algorithm
= NULL
;
629 cfi_info
->erase_check_algorithm
= NULL
;
631 cfi_info
->x16_as_x8
= 0;
632 cfi_info
->jedec_probe
= 0;
633 cfi_info
->not_cfi
= 0;
635 for (i
= 6; i
< argc
; i
++)
637 if (strcmp(args
[i
], "x16_as_x8") == 0)
639 cfi_info
->x16_as_x8
= 1;
641 else if (strcmp(args
[i
], "jedec_probe") == 0)
643 cfi_info
->jedec_probe
= 1;
647 cfi_info
->write_algorithm
= NULL
;
649 /* bank wasn't probed yet */
650 cfi_info
->qry
[0] = -1;
655 int cfi_intel_erase(struct flash_bank_s
*bank
, int first
, int last
)
657 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
658 target_t
*target
= bank
->target
;
662 cfi_intel_clear_status_register(bank
);
664 for (i
= first
; i
<= last
; i
++)
666 cfi_command(bank
, 0x20, command
);
667 target
->type
->write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
);
669 cfi_command(bank
, 0xd0, command
);
670 target
->type
->write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
);
672 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->block_erase_timeout_typ
)) == 0x80)
673 bank
->sectors
[i
].is_erased
= 1;
676 cfi_command(bank
, 0xff, command
);
677 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
679 ERROR("couldn't erase block %i of flash bank at base 0x%x", i
, bank
->base
);
680 return ERROR_FLASH_OPERATION_FAILED
;
684 cfi_command(bank
, 0xff, command
);
685 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
690 int cfi_spansion_erase(struct flash_bank_s
*bank
, int first
, int last
)
692 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
693 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
694 target_t
*target
= bank
->target
;
698 for (i
= first
; i
<= last
; i
++)
700 cfi_command(bank
, 0xaa, command
);
701 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
);
703 cfi_command(bank
, 0x55, command
);
704 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock2
), bank
->bus_width
, 1, command
);
706 cfi_command(bank
, 0x80, command
);
707 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
);
709 cfi_command(bank
, 0xaa, command
);
710 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
);
712 cfi_command(bank
, 0x55, command
);
713 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock2
), bank
->bus_width
, 1, command
);
715 cfi_command(bank
, 0x30, command
);
716 target
->type
->write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
);
718 if (cfi_spansion_wait_status_busy(bank
, 1000 * (1 << cfi_info
->block_erase_timeout_typ
)) == ERROR_OK
)
719 bank
->sectors
[i
].is_erased
= 1;
722 cfi_command(bank
, 0xf0, command
);
723 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
725 ERROR("couldn't erase block %i of flash bank at base 0x%x", i
, bank
->base
);
726 return ERROR_FLASH_OPERATION_FAILED
;
730 cfi_command(bank
, 0xf0, command
);
731 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
736 int cfi_erase(struct flash_bank_s
*bank
, int first
, int last
)
738 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
740 if (bank
->target
->state
!= TARGET_HALTED
)
742 return ERROR_TARGET_NOT_HALTED
;
745 if ((first
< 0) || (last
< first
) || (last
>= bank
->num_sectors
))
747 return ERROR_FLASH_SECTOR_INVALID
;
750 if (cfi_info
->qry
[0] != 'Q')
751 return ERROR_FLASH_BANK_NOT_PROBED
;
753 switch(cfi_info
->pri_id
)
757 return cfi_intel_erase(bank
, first
, last
);
760 return cfi_spansion_erase(bank
, first
, last
);
763 ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
770 int cfi_intel_protect(struct flash_bank_s
*bank
, int set
, int first
, int last
)
772 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
773 cfi_intel_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
774 target_t
*target
= bank
->target
;
779 /* if the device supports neither legacy lock/unlock (bit 3) nor
780 * instant individual block locking (bit 5).
782 if (!(pri_ext
->feature_support
& 0x28))
783 return ERROR_FLASH_OPERATION_FAILED
;
785 cfi_intel_clear_status_register(bank
);
787 for (i
= first
; i
<= last
; i
++)
789 cfi_command(bank
, 0x60, command
);
790 DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank
, i
, 0x0), target_buffer_get_u32(target
, command
));
791 target
->type
->write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
);
794 cfi_command(bank
, 0x01, command
);
795 DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank
, i
, 0x0), target_buffer_get_u32(target
, command
));
796 target
->type
->write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
);
797 bank
->sectors
[i
].is_protected
= 1;
801 cfi_command(bank
, 0xd0, command
);
802 DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank
, i
, 0x0), target_buffer_get_u32(target
, command
));
803 target
->type
->write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
);
804 bank
->sectors
[i
].is_protected
= 0;
807 /* instant individual block locking doesn't require reading of the status register */
808 if (!(pri_ext
->feature_support
& 0x20))
810 /* Clear lock bits operation may take up to 1.4s */
811 cfi_intel_wait_status_busy(bank
, 1400);
816 /* read block lock bit, to verify status */
817 cfi_command(bank
, 0x90, command
);
818 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x55), bank
->bus_width
, 1, command
);
819 block_status
= cfi_get_u8(bank
, i
, 0x2);
821 if ((block_status
& 0x1) != set
)
823 ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)", set
, block_status
);
824 cfi_command(bank
, 0x70, command
);
825 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x55), bank
->bus_width
, 1, command
);
826 cfi_intel_wait_status_busy(bank
, 10);
829 return ERROR_FLASH_OPERATION_FAILED
;
839 /* if the device doesn't support individual block lock bits set/clear,
840 * all blocks have been unlocked in parallel, so we set those that should be protected
842 if ((!set
) && (!(pri_ext
->feature_support
& 0x20)))
844 for (i
= 0; i
< bank
->num_sectors
; i
++)
846 if (bank
->sectors
[i
].is_protected
== 1)
848 cfi_intel_clear_status_register(bank
);
850 cfi_command(bank
, 0x60, command
);
851 target
->type
->write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
);
853 cfi_command(bank
, 0x01, command
);
854 target
->type
->write_memory(target
, flash_address(bank
, i
, 0x0), bank
->bus_width
, 1, command
);
856 cfi_intel_wait_status_busy(bank
, 100);
861 cfi_command(bank
, 0xff, command
);
862 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
867 int cfi_protect(struct flash_bank_s
*bank
, int set
, int first
, int last
)
869 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
871 if (bank
->target
->state
!= TARGET_HALTED
)
873 return ERROR_TARGET_NOT_HALTED
;
876 if ((first
< 0) || (last
< first
) || (last
>= bank
->num_sectors
))
878 return ERROR_FLASH_SECTOR_INVALID
;
881 if (cfi_info
->qry
[0] != 'Q')
882 return ERROR_FLASH_BANK_NOT_PROBED
;
884 switch(cfi_info
->pri_id
)
888 cfi_intel_protect(bank
, set
, first
, last
);
891 ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
898 /* FIXME Replace this by a simple memcpy() - still unsure about sideeffects */
899 static void cfi_add_byte(struct flash_bank_s
*bank
, u8
*word
, u8 byte
)
901 //target_t *target = bank->target;
906 // The data to flash must not be changed in endian! We write a bytestrem in
907 // target byte order already. Only the control and status byte lane of the flash
908 // WSM is interpreted by the CPU in different ways, when read a u16 or u32
909 // word (data seems to be in the upper or lower byte lane for u16 accesses).
911 //if (target->endianness == TARGET_LITTLE_ENDIAN)
914 for (i
= 0; i
< bank
->bus_width
- 1; i
++)
915 word
[i
] = word
[i
+ 1];
916 word
[bank
->bus_width
- 1] = byte
;
921 // for (i = bank->bus_width - 1; i > 0; i--)
922 // word[i] = word[i - 1];
927 /* Convert code image to target endian */
928 /* FIXME create general block conversion fcts in target.c?) */ static
929 void cfi_fix_code_endian(target_t
*target
, u32
*dest
, const u32
*src
, u32 count
)
932 for (i
=0; i
< count
; i
++)
934 target_buffer_set_u32(target
, (u8
*)dest
, *src
);
940 int cfi_intel_write_block(struct flash_bank_s
*bank
, u8
*buffer
, u32 address
, u32 count
)
942 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
943 target_t
*target
= bank
->target
;
944 reg_param_t reg_params
[7];
945 armv4_5_algorithm_t armv4_5_info
;
946 working_area_t
*source
;
947 u32 buffer_size
= 32768;
948 u8 write_command_buf
[CFI_MAX_BUS_WIDTH
];
949 u8 busy_pattern_buf
[CFI_MAX_BUS_WIDTH
];
950 u8 error_pattern_buf
[CFI_MAX_BUS_WIDTH
];
951 u32 write_command_val
, busy_pattern_val
, error_pattern_val
;
953 /* algorithm register usage:
954 * r0: source address (in RAM)
955 * r1: target address (in Flash)
957 * r3: flash write command
958 * r4: status byte (returned to host)
959 * r5: busy test pattern
960 * r6: error test pattern
963 static const u32 word_32_code
[] = {
964 0xe4904004, /* loop: ldr r4, [r0], #4 */
965 0xe5813000, /* str r3, [r1] */
966 0xe5814000, /* str r4, [r1] */
967 0xe5914000, /* busy: ldr r4, [r1] */
968 0xe0047005, /* and r7, r4, r5 */
969 0xe1570005, /* cmp r7, r5 */
970 0x1afffffb, /* bne busy */
971 0xe1140006, /* tst r4, r6 */
972 0x1a000003, /* bne done */
973 0xe2522001, /* subs r2, r2, #1 */
974 0x0a000001, /* beq done */
975 0xe2811004, /* add r1, r1 #4 */
976 0xeafffff2, /* b loop */
977 0xeafffffe /* done: b -2 */
980 static const u32 word_16_code
[] = {
981 0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
982 0xe1c130b0, /* strh r3, [r1] */
983 0xe1c140b0, /* strh r4, [r1] */
984 0xe1d140b0, /* busy ldrh r4, [r1] */
985 0xe0047005, /* and r7, r4, r5 */
986 0xe1570005, /* cmp r7, r5 */
987 0x1afffffb, /* bne busy */
988 0xe1140006, /* tst r4, r6 */
989 0x1a000003, /* bne done */
990 0xe2522001, /* subs r2, r2, #1 */
991 0x0a000001, /* beq done */
992 0xe2811002, /* add r1, r1 #2 */
993 0xeafffff2, /* b loop */
994 0xeafffffe /* done: b -2 */
997 static const u32 word_8_code
[] = {
998 0xe4d04001, /* loop: ldrb r4, [r0], #1 */
999 0xe5c13000, /* strb r3, [r1] */
1000 0xe5c14000, /* strb r4, [r1] */
1001 0xe5d14000, /* busy ldrb r4, [r1] */
1002 0xe0047005, /* and r7, r4, r5 */
1003 0xe1570005, /* cmp r7, r5 */
1004 0x1afffffb, /* bne busy */
1005 0xe1140006, /* tst r4, r6 */
1006 0x1a000003, /* bne done */
1007 0xe2522001, /* subs r2, r2, #1 */
1008 0x0a000001, /* beq done */
1009 0xe2811001, /* add r1, r1 #1 */
1010 0xeafffff2, /* b loop */
1011 0xeafffffe /* done: b -2 */
1013 u32 target_code
[CFI_MAX_INTEL_CODESIZE
];
1014 const u32
*target_code_src
;
1015 int target_code_size
;
1016 int retval
= ERROR_OK
;
1019 cfi_intel_clear_status_register(bank
);
1021 armv4_5_info
.common_magic
= ARMV4_5_COMMON_MAGIC
;
1022 armv4_5_info
.core_mode
= ARMV4_5_MODE_SVC
;
1023 armv4_5_info
.core_state
= ARMV4_5_STATE_ARM
;
1025 /* If we are setting up the write_algorith, we need target_code_src */
1026 /* if not we only need target_code_size. */
1028 /* However, we don't want to create multiple code paths, so we */
1029 /* do the unecessary evaluation of target_code_src, which the */
1030 /* compiler will probably nicely optimize away if not needed */
1032 /* prepare algorithm code for target endian */
1033 switch (bank
->bus_width
)
1036 target_code_src
= word_8_code
;
1037 target_code_size
= sizeof(word_8_code
);
1040 target_code_src
= word_16_code
;
1041 target_code_size
= sizeof(word_16_code
);
1044 target_code_src
= word_32_code
;
1045 target_code_size
= sizeof(word_32_code
);
1048 ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank
->bus_width
);
1049 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1052 /* flash write code */
1053 if (!cfi_info
->write_algorithm
)
1055 if ( target_code_size
> sizeof(target_code
) )
1057 WARNING("Internal error - target code buffer to small. Increase CFI_MAX_INTEL_CODESIZE and recompile.");
1058 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1060 cfi_fix_code_endian(target
, target_code
, target_code_src
, target_code_size
);
1062 /* Get memory for block write handler */
1063 retval
= target_alloc_working_area(target
, target_code_size
, &cfi_info
->write_algorithm
);
1064 if (retval
!= ERROR_OK
)
1066 WARNING("No working area available, can't do block memory writes");
1067 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1070 /* write algorithm code to working area */
1071 retval
= target_write_buffer(target
, cfi_info
->write_algorithm
->address
, target_code_size
, (u8
*)target_code
);
1072 if (retval
!= ERROR_OK
)
1074 ERROR("Unable to write block write code to target");
1079 /* Get a workspace buffer for the data to flash starting with 32k size.
1080 Half size until buffer would be smaller 256 Bytem then fail back */
1081 /* FIXME Why 256 bytes, why not 32 bytes (smallest flash write page */
1082 while (target_alloc_working_area(target
, buffer_size
, &source
) != ERROR_OK
)
1085 if (buffer_size
<= 256)
1087 WARNING("no large enough working area available, can't do block memory writes");
1088 retval
= ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1093 /* setup algo registers */
1094 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
1095 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
1096 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
);
1097 init_reg_param(®_params
[3], "r3", 32, PARAM_OUT
);
1098 init_reg_param(®_params
[4], "r4", 32, PARAM_IN
);
1099 init_reg_param(®_params
[5], "r5", 32, PARAM_OUT
);
1100 init_reg_param(®_params
[6], "r6", 32, PARAM_OUT
);
1102 /* prepare command and status register patterns */
1103 cfi_command(bank
, 0x40, write_command_buf
);
1104 cfi_command(bank
, 0x80, busy_pattern_buf
);
1105 cfi_command(bank
, 0x7e, error_pattern_buf
);
1107 switch (bank
->bus_width
)
1110 write_command_val
= write_command_buf
[0];
1111 busy_pattern_val
= busy_pattern_buf
[0];
1112 error_pattern_val
= error_pattern_buf
[0];
1115 write_command_val
= target_buffer_get_u16(target
, write_command_buf
);
1116 busy_pattern_val
= target_buffer_get_u16(target
, busy_pattern_buf
);
1117 error_pattern_val
= target_buffer_get_u16(target
, error_pattern_buf
);
1120 write_command_val
= target_buffer_get_u32(target
, write_command_buf
);
1121 busy_pattern_val
= target_buffer_get_u32(target
, busy_pattern_buf
);
1122 error_pattern_val
= target_buffer_get_u32(target
, error_pattern_buf
);
1125 ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank
->bus_width
);
1126 retval
= ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1130 INFO("Using target buffer at 0x%08x and of size 0x%04x", source
->address
, buffer_size
);
1132 /* Programming main loop */
1135 u32 thisrun_count
= (count
> buffer_size
) ? buffer_size
: count
;
1138 target_write_buffer(target
, source
->address
, thisrun_count
, buffer
);
1140 buf_set_u32(reg_params
[0].value
, 0, 32, source
->address
);
1141 buf_set_u32(reg_params
[1].value
, 0, 32, address
);
1142 buf_set_u32(reg_params
[2].value
, 0, 32, thisrun_count
/ bank
->bus_width
);
1144 buf_set_u32(reg_params
[3].value
, 0, 32, write_command_val
);
1145 buf_set_u32(reg_params
[5].value
, 0, 32, busy_pattern_val
);
1146 buf_set_u32(reg_params
[6].value
, 0, 32, error_pattern_val
);
1148 INFO("Write 0x%04x bytes to flash at 0x%08x", thisrun_count
, address
);
1150 /* Execute algorithm, assume breakpoint for last instruction */
1151 retval
= target
->type
->run_algorithm(target
, 0, NULL
, 7, reg_params
,
1152 cfi_info
->write_algorithm
->address
,
1153 cfi_info
->write_algorithm
->address
+ target_code_size
- sizeof(u32
),
1154 10000, /* 10s should be enough for max. 32k of data */
1157 /* On failure try a fall back to direct word writes */
1158 if (retval
!= ERROR_OK
)
1160 cfi_intel_clear_status_register(bank
);
1161 ERROR("Execution of flash algorythm failed. Can't fall back. Please report.");
1162 retval
= ERROR_FLASH_OPERATION_FAILED
;
1163 //retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
1164 // FIXME To allow fall back or recovery, we must save the actual status
1165 // somewhere, so that a higher level code can start recovery.
1169 /* Check return value from algo code */
1170 wsm_error
= buf_get_u32(reg_params
[4].value
, 0, 32) & error_pattern_val
;
1173 /* read status register (outputs debug inforation) */
1174 cfi_intel_wait_status_busy(bank
, 100);
1175 cfi_intel_clear_status_register(bank
);
1176 retval
= ERROR_FLASH_OPERATION_FAILED
;
1180 buffer
+= thisrun_count
;
1181 address
+= thisrun_count
;
1182 count
-= thisrun_count
;
1185 /* free up resources */
1188 target_free_working_area(target
, source
);
1190 if (cfi_info
->write_algorithm
)
1192 target_free_working_area(target
, cfi_info
->write_algorithm
);
1193 cfi_info
->write_algorithm
= NULL
;
1196 destroy_reg_param(®_params
[0]);
1197 destroy_reg_param(®_params
[1]);
1198 destroy_reg_param(®_params
[2]);
1199 destroy_reg_param(®_params
[3]);
1200 destroy_reg_param(®_params
[4]);
1201 destroy_reg_param(®_params
[5]);
1202 destroy_reg_param(®_params
[6]);
1207 int cfi_spansion_write_block(struct flash_bank_s
*bank
, u8
*buffer
, u32 address
, u32 count
)
1209 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1210 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
1211 target_t
*target
= bank
->target
;
1212 reg_param_t reg_params
[10];
1213 armv4_5_algorithm_t armv4_5_info
;
1214 working_area_t
*source
;
1215 u32 buffer_size
= 32768;
1216 u8 write_command
[CFI_MAX_BUS_WIDTH
];
1220 int exit_code
= ERROR_OK
;
1222 /* input parameters - */
1223 /* R0 = source address */
1224 /* R1 = destination address */
1225 /* R2 = number of writes */
1226 /* R3 = flash write command */
1227 /* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
1228 /* output parameters - */
1229 /* R5 = 0x80 ok 0x00 bad */
1230 /* temp registers - */
1231 /* R6 = value read from flash to test status */
1232 /* R7 = holding register */
1233 /* unlock registers - */
1234 /* R8 = unlock1_addr */
1235 /* R9 = unlock1_cmd */
1236 /* R10 = unlock2_addr */
1237 /* R11 = unlock2_cmd */
1239 u32 word_32_code
[] = {
1240 /* 00008100 <sp_32_code>: */
1241 0xe4905004, /* ldr r5, [r0], #4 */
1242 0xe5889000, /* str r9, [r8] */
1243 0xe58ab000, /* str r11, [r10] */
1244 0xe5883000, /* str r3, [r8] */
1245 0xe5815000, /* str r5, [r1] */
1246 0xe1a00000, /* nop */
1248 /* 00008110 <sp_32_busy>: */
1249 0xe5916000, /* ldr r6, [r1] */
1250 0xe0257006, /* eor r7, r5, r6 */
1251 0xe0147007, /* ands r7, r4, r7 */
1252 0x0a000007, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
1253 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1254 0x0afffff9, /* beq 8110 <sp_32_busy> ; b if DQ5 low */
1255 0xe5916000, /* ldr r6, [r1] */
1256 0xe0257006, /* eor r7, r5, r6 */
1257 0xe0147007, /* ands r7, r4, r7 */
1258 0x0a000001, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
1259 0xe3a05000, /* mov r5, #0 ; 0x0 - return 0x00, error */
1260 0x1a000004, /* bne 8154 <sp_32_done> */
1262 /* 00008140 <sp_32_cont>: */
1263 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1264 0x03a05080, /* moveq r5, #128 ; 0x80 */
1265 0x0a000001, /* beq 8154 <sp_32_done> */
1266 0xe2811004, /* add r1, r1, #4 ; 0x4 */
1267 0xeaffffe8, /* b 8100 <sp_32_code> */
1269 /* 00008154 <sp_32_done>: */
1270 0xeafffffe /* b 8154 <sp_32_done> */
1273 u32 word_16_code
[] = {
1274 /* 00008158 <sp_16_code>: */
1275 0xe0d050b2, /* ldrh r5, [r0], #2 */
1276 0xe1c890b0, /* strh r9, [r8] */
1277 0xe1cab0b0, /* strh r11, [r10] */
1278 0xe1c830b0, /* strh r3, [r8] */
1279 0xe1c150b0, /* strh r5, [r1] */
1280 0xe1a00000, /* nop (mov r0,r0) */
1282 /* 00008168 <sp_16_busy>: */
1283 0xe1d160b0, /* ldrh r6, [r1] */
1284 0xe0257006, /* eor r7, r5, r6 */
1285 0xe0147007, /* ands r7, r4, r7 */
1286 0x0a000007, /* beq 8198 <sp_16_cont> */
1287 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1288 0x0afffff9, /* beq 8168 <sp_16_busy> */
1289 0xe1d160b0, /* ldrh r6, [r1] */
1290 0xe0257006, /* eor r7, r5, r6 */
1291 0xe0147007, /* ands r7, r4, r7 */
1292 0x0a000001, /* beq 8198 <sp_16_cont> */
1293 0xe3a05000, /* mov r5, #0 ; 0x0 */
1294 0x1a000004, /* bne 81ac <sp_16_done> */
1296 /* 00008198 <sp_16_cont>: */
1297 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1298 0x03a05080, /* moveq r5, #128 ; 0x80 */
1299 0x0a000001, /* beq 81ac <sp_16_done> */
1300 0xe2811002, /* add r1, r1, #2 ; 0x2 */
1301 0xeaffffe8, /* b 8158 <sp_16_code> */
1303 /* 000081ac <sp_16_done>: */
1304 0xeafffffe /* b 81ac <sp_16_done> */
1307 u32 word_8_code
[] = {
1308 /* 000081b0 <sp_16_code_end>: */
1309 0xe4d05001, /* ldrb r5, [r0], #1 */
1310 0xe5c89000, /* strb r9, [r8] */
1311 0xe5cab000, /* strb r11, [r10] */
1312 0xe5c83000, /* strb r3, [r8] */
1313 0xe5c15000, /* strb r5, [r1] */
1314 0xe1a00000, /* nop (mov r0,r0) */
1316 /* 000081c0 <sp_8_busy>: */
1317 0xe5d16000, /* ldrb r6, [r1] */
1318 0xe0257006, /* eor r7, r5, r6 */
1319 0xe0147007, /* ands r7, r4, r7 */
1320 0x0a000007, /* beq 81f0 <sp_8_cont> */
1321 0xe0166124, /* ands r6, r6, r4, lsr #2 */
1322 0x0afffff9, /* beq 81c0 <sp_8_busy> */
1323 0xe5d16000, /* ldrb r6, [r1] */
1324 0xe0257006, /* eor r7, r5, r6 */
1325 0xe0147007, /* ands r7, r4, r7 */
1326 0x0a000001, /* beq 81f0 <sp_8_cont> */
1327 0xe3a05000, /* mov r5, #0 ; 0x0 */
1328 0x1a000004, /* bne 8204 <sp_8_done> */
1330 /* 000081f0 <sp_8_cont>: */
1331 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
1332 0x03a05080, /* moveq r5, #128 ; 0x80 */
1333 0x0a000001, /* beq 8204 <sp_8_done> */
1334 0xe2811001, /* add r1, r1, #1 ; 0x1 */
1335 0xeaffffe8, /* b 81b0 <sp_16_code_end> */
1337 /* 00008204 <sp_8_done>: */
1338 0xeafffffe /* b 8204 <sp_8_done> */
1341 armv4_5_info
.common_magic
= ARMV4_5_COMMON_MAGIC
;
1342 armv4_5_info
.core_mode
= ARMV4_5_MODE_SVC
;
1343 armv4_5_info
.core_state
= ARMV4_5_STATE_ARM
;
1345 /* flash write code */
1346 if (!cfi_info
->write_algorithm
)
1350 /* convert bus-width dependent algorithm code to correct endiannes */
1351 if (bank
->bus_width
== 1)
1353 code_p
= malloc(24 * 4);
1355 for (i
= 0; i
< 24; i
++)
1356 target_buffer_set_u32(target
, code_p
+ (i
*4), word_8_code
[i
]);
1358 else if (bank
->bus_width
== 2)
1360 code_p
= malloc(24 * 4);
1362 for (i
= 0; i
< 24; i
++)
1363 target_buffer_set_u32(target
, code_p
+ (i
*4), word_16_code
[i
]);
1365 else if (bank
->bus_width
== 4)
1367 code_p
= malloc(24 * 4);
1369 for (i
= 0; i
< 24; i
++)
1370 target_buffer_set_u32(target
, code_p
+ (i
*4), word_32_code
[i
]);
1374 return ERROR_FLASH_OPERATION_FAILED
;
1377 /* allocate working area */
1378 if (target_alloc_working_area(target
, 24 * 4,
1379 &cfi_info
->write_algorithm
) != ERROR_OK
)
1381 WARNING("no working area available, can't do block memory writes");
1382 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1385 /* write algorithm code to working area */
1386 target_write_buffer(target
, cfi_info
->write_algorithm
->address
, 24 * 4, code_p
);
1391 while (target_alloc_working_area(target
, buffer_size
, &source
) != ERROR_OK
)
1394 if (buffer_size
<= 256)
1396 /* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
1397 if (cfi_info
->write_algorithm
)
1398 target_free_working_area(target
, cfi_info
->write_algorithm
);
1400 WARNING("not enough working area available, can't do block memory writes");
1401 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1405 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
1406 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
1407 init_reg_param(®_params
[2], "r2", 32, PARAM_OUT
);
1408 init_reg_param(®_params
[3], "r3", 32, PARAM_OUT
);
1409 init_reg_param(®_params
[4], "r4", 32, PARAM_OUT
);
1410 init_reg_param(®_params
[5], "r5", 32, PARAM_IN
);
1411 init_reg_param(®_params
[6], "r8", 32, PARAM_OUT
);
1412 init_reg_param(®_params
[7], "r9", 32, PARAM_OUT
);
1413 init_reg_param(®_params
[8], "r10", 32, PARAM_OUT
);
1414 init_reg_param(®_params
[9], "r11", 32, PARAM_OUT
);
1418 u32 thisrun_count
= (count
> buffer_size
) ? buffer_size
: count
;
1420 target_write_buffer(target
, source
->address
, thisrun_count
, buffer
);
1422 buf_set_u32(reg_params
[0].value
, 0, 32, source
->address
);
1423 buf_set_u32(reg_params
[1].value
, 0, 32, address
);
1424 buf_set_u32(reg_params
[2].value
, 0, 32, thisrun_count
/ bank
->bus_width
);
1425 cfi_command(bank
, 0xA0, write_command
);
1426 buf_set_u32(reg_params
[3].value
, 0, 32, buf_get_u32(write_command
, 0, 32));
1427 cfi_command(bank
, 0x80, write_command
);
1428 buf_set_u32(reg_params
[4].value
, 0, 32, buf_get_u32(write_command
, 0, 32));
1429 buf_set_u32(reg_params
[6].value
, 0, 32, flash_address(bank
, 0, pri_ext
->_unlock1
));
1430 buf_set_u32(reg_params
[7].value
, 0, 32, 0xaa);
1431 buf_set_u32(reg_params
[8].value
, 0, 32, flash_address(bank
, 0, pri_ext
->_unlock2
));
1432 buf_set_u32(reg_params
[9].value
, 0, 32, 0x55);
1434 retval
= target
->type
->run_algorithm(target
, 0, NULL
, 10, reg_params
,
1435 cfi_info
->write_algorithm
->address
,
1436 cfi_info
->write_algorithm
->address
+ ((24 * 4) - 4),
1437 10000, &armv4_5_info
);
1439 status
= buf_get_u32(reg_params
[5].value
, 0, 32);
1441 if ((retval
!= ERROR_OK
) || status
!= 0x80)
1443 DEBUG("status: 0x%x", status
);
1444 exit_code
= ERROR_FLASH_OPERATION_FAILED
;
1448 buffer
+= thisrun_count
;
1449 address
+= thisrun_count
;
1450 count
-= thisrun_count
;
1453 target_free_working_area(target
, source
);
1455 destroy_reg_param(®_params
[0]);
1456 destroy_reg_param(®_params
[1]);
1457 destroy_reg_param(®_params
[2]);
1458 destroy_reg_param(®_params
[3]);
1459 destroy_reg_param(®_params
[4]);
1460 destroy_reg_param(®_params
[5]);
1461 destroy_reg_param(®_params
[6]);
1462 destroy_reg_param(®_params
[7]);
1463 destroy_reg_param(®_params
[8]);
1464 destroy_reg_param(®_params
[9]);
1469 int cfi_intel_write_word(struct flash_bank_s
*bank
, u8
*word
, u32 address
)
1471 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1472 target_t
*target
= bank
->target
;
1475 cfi_intel_clear_status_register(bank
);
1476 cfi_command(bank
, 0x40, command
);
1477 target
->type
->write_memory(target
, address
, bank
->bus_width
, 1, command
);
1479 target
->type
->write_memory(target
, address
, bank
->bus_width
, 1, word
);
1481 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->word_write_timeout_max
)) != 0x80)
1483 cfi_command(bank
, 0xff, command
);
1484 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
1486 ERROR("couldn't write word at base 0x%x, address %x", bank
->base
, address
);
1487 return ERROR_FLASH_OPERATION_FAILED
;
1493 int cfi_intel_write_words(struct flash_bank_s
*bank
, u8
*word
, u32 wordcount
, u32 address
)
1495 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1496 target_t
*target
= bank
->target
;
1499 /* Calculate buffer size and boundary mask */
1500 u32 buffersize
= 1UL << cfi_info
->max_buf_write_size
;
1501 u32 buffermask
= buffersize
-1;
1504 /* Check for valid range */
1505 if (address
& buffermask
)
1507 ERROR("Write address at base 0x%x, address %x not aligned to 2^%d boundary", bank
->base
, address
, cfi_info
->max_buf_write_size
);
1508 return ERROR_FLASH_OPERATION_FAILED
;
1510 switch(bank
->chip_width
)
1512 case 4 : bufferwsize
= buffersize
/ 4; break;
1513 case 2 : bufferwsize
= buffersize
/ 2; break;
1514 case 1 : bufferwsize
= buffersize
; break;
1516 ERROR("Unsupported chip width %d", bank
->chip_width
);
1517 return ERROR_FLASH_OPERATION_FAILED
;
1520 /* Check for valid size */
1521 if (wordcount
> bufferwsize
)
1523 ERROR("Number of data words %d exceeds available buffersize %d", wordcount
, buffersize
);
1524 return ERROR_FLASH_OPERATION_FAILED
;
1527 /* Write to flash buffer */
1528 cfi_intel_clear_status_register(bank
);
1530 /* Initiate buffer operation _*/
1531 cfi_command(bank
, 0xE8, command
);
1532 target
->type
->write_memory(target
, address
, bank
->bus_width
, 1, command
);
1533 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->buf_write_timeout_max
)) != 0x80)
1535 cfi_command(bank
, 0xff, command
);
1536 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
1538 ERROR("couldn't start buffer write operation at base 0x%x, address %x", bank
->base
, address
);
1539 return ERROR_FLASH_OPERATION_FAILED
;
1542 /* Write buffer wordcount-1 and data words */
1543 cfi_command(bank
, bufferwsize
-1, command
);
1544 target
->type
->write_memory(target
, address
, bank
->bus_width
, 1, command
);
1546 target
->type
->write_memory(target
, address
, bank
->bus_width
, bufferwsize
, word
);
1548 /* Commit write operation */
1549 cfi_command(bank
, 0xd0, command
);
1550 target
->type
->write_memory(target
, address
, bank
->bus_width
, 1, command
);
1551 if (cfi_intel_wait_status_busy(bank
, 1000 * (1 << cfi_info
->buf_write_timeout_max
)) != 0x80)
1553 cfi_command(bank
, 0xff, command
);
1554 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
1556 ERROR("Buffer write at base 0x%x, address %x failed.", bank
->base
, address
);
1557 return ERROR_FLASH_OPERATION_FAILED
;
1563 int cfi_spansion_write_word(struct flash_bank_s
*bank
, u8
*word
, u32 address
)
1565 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1566 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
1567 target_t
*target
= bank
->target
;
1570 cfi_command(bank
, 0xaa, command
);
1571 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
);
1573 cfi_command(bank
, 0x55, command
);
1574 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock2
), bank
->bus_width
, 1, command
);
1576 cfi_command(bank
, 0xa0, command
);
1577 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
);
1579 target
->type
->write_memory(target
, address
, bank
->bus_width
, 1, word
);
1581 if (cfi_spansion_wait_status_busy(bank
, 1000 * (1 << cfi_info
->word_write_timeout_max
)) != ERROR_OK
)
1583 cfi_command(bank
, 0xf0, command
);
1584 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
1586 ERROR("couldn't write word at base 0x%x, address %x", bank
->base
, address
);
1587 return ERROR_FLASH_OPERATION_FAILED
;
1593 int cfi_write_word(struct flash_bank_s
*bank
, u8
*word
, u32 address
)
1595 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1597 switch(cfi_info
->pri_id
)
1601 return cfi_intel_write_word(bank
, word
, address
);
1604 return cfi_spansion_write_word(bank
, word
, address
);
1607 ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
1611 return ERROR_FLASH_OPERATION_FAILED
;
1614 int cfi_write_words(struct flash_bank_s
*bank
, u8
*word
, u32 wordcount
, u32 address
)
1616 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1618 switch(cfi_info
->pri_id
)
1622 return cfi_intel_write_words(bank
, word
, wordcount
, address
);
1625 //return cfi_spansion_write_words(bank, word, address);
1626 ERROR("cfi primary command set %i unimplemented - FIXME", cfi_info
->pri_id
);
1629 ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
1633 return ERROR_FLASH_OPERATION_FAILED
;
1636 int cfi_write(struct flash_bank_s
*bank
, u8
*buffer
, u32 offset
, u32 count
)
1638 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1639 target_t
*target
= bank
->target
;
1640 u32 address
= bank
->base
+ offset
; /* address of first byte to be programmed */
1641 u32 write_p
, copy_p
;
1642 int align
; /* number of unaligned bytes */
1643 int blk_count
; /* number of bus_width bytes for block copy */
1644 u8 current_word
[CFI_MAX_BUS_WIDTH
* 4]; /* word (bus_width size) currently being programmed */
1648 if (bank
->target
->state
!= TARGET_HALTED
)
1650 return ERROR_TARGET_NOT_HALTED
;
1653 if (offset
+ count
> bank
->size
)
1654 return ERROR_FLASH_DST_OUT_OF_BANK
;
1656 if (cfi_info
->qry
[0] != 'Q')
1657 return ERROR_FLASH_BANK_NOT_PROBED
;
1659 /* start at the first byte of the first word (bus_width size) */
1660 write_p
= address
& ~(bank
->bus_width
- 1);
1661 if ((align
= address
- write_p
) != 0)
1663 INFO("Fixup %d unaligned head bytes", align
);
1665 for (i
= 0; i
< bank
->bus_width
; i
++)
1666 current_word
[i
] = 0;
1669 /* copy bytes before the first write address */
1670 for (i
= 0; i
< align
; ++i
, ++copy_p
)
1673 target
->type
->read_memory(target
, copy_p
, 1, 1, &byte
);
1674 cfi_add_byte(bank
, current_word
, byte
);
1677 /* add bytes from the buffer */
1678 for (; (i
< bank
->bus_width
) && (count
> 0); i
++)
1680 cfi_add_byte(bank
, current_word
, *buffer
++);
1685 /* if the buffer is already finished, copy bytes after the last write address */
1686 for (; (count
== 0) && (i
< bank
->bus_width
); ++i
, ++copy_p
)
1689 target
->type
->read_memory(target
, copy_p
, 1, 1, &byte
);
1690 cfi_add_byte(bank
, current_word
, byte
);
1693 retval
= cfi_write_word(bank
, current_word
, write_p
);
1694 if (retval
!= ERROR_OK
)
1699 /* handle blocks of bus_size aligned bytes */
1700 blk_count
= count
& ~(bank
->bus_width
- 1); /* round down, leave tail bytes */
1701 switch(cfi_info
->pri_id
)
1703 /* try block writes (fails without working area) */
1706 retval
= cfi_intel_write_block(bank
, buffer
, write_p
, blk_count
);
1709 retval
= cfi_spansion_write_block(bank
, buffer
, write_p
, blk_count
);
1712 ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
1713 retval
= ERROR_FLASH_OPERATION_FAILED
;
1716 if (retval
== ERROR_OK
)
1718 /* Increment pointers and decrease count on succesful block write */
1719 buffer
+= blk_count
;
1720 write_p
+= blk_count
;
1725 if (retval
== ERROR_TARGET_RESOURCE_NOT_AVAILABLE
)
1727 u32 buffersize
= 1UL << cfi_info
->max_buf_write_size
;
1728 u32 buffermask
= buffersize
-1;
1731 switch(bank
->chip_width
)
1733 case 4 : bufferwsize
= buffersize
/ 4; break;
1734 case 2 : bufferwsize
= buffersize
/ 2; break;
1735 case 1 : bufferwsize
= buffersize
; break;
1737 ERROR("Unsupported chip width %d", bank
->chip_width
);
1738 return ERROR_FLASH_OPERATION_FAILED
;
1741 /* fall back to memory writes */
1742 while (count
> bank
->bus_width
)
1744 if ((write_p
& 0xff) == 0)
1746 INFO("Programming at %08x, count %08x bytes remaining", write_p
, count
);
1748 if ((count
> bufferwsize
) && !(write_p
& buffermask
))
1750 retval
= cfi_write_words(bank
, buffer
, bufferwsize
, write_p
);
1751 if (retval
!= ERROR_OK
)
1754 buffer
+= buffersize
;
1755 write_p
+= buffersize
;
1756 count
-= buffersize
;
1760 for (i
= 0; i
< bank
->bus_width
; i
++)
1761 current_word
[i
] = 0;
1763 for (i
= 0; i
< bank
->bus_width
; i
++)
1765 cfi_add_byte(bank
, current_word
, *buffer
++);
1768 retval
= cfi_write_word(bank
, current_word
, write_p
);
1769 if (retval
!= ERROR_OK
)
1772 write_p
+= bank
->bus_width
;
1773 count
-= bank
->bus_width
;
1781 /* return to read array mode, so we can read from flash again for padding */
1782 cfi_command(bank
, 0xf0, current_word
);
1783 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, current_word
);
1784 cfi_command(bank
, 0xff, current_word
);
1785 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, current_word
);
1787 /* handle unaligned tail bytes */
1790 INFO("Fixup %d unaligned tail bytes", count
);
1793 for (i
= 0; i
< bank
->bus_width
; i
++)
1794 current_word
[i
] = 0;
1796 for (i
= 0; (i
< bank
->bus_width
) && (count
> 0); ++i
, ++copy_p
)
1798 cfi_add_byte(bank
, current_word
, *buffer
++);
1801 for (; i
< bank
->bus_width
; ++i
, ++copy_p
)
1804 target
->type
->read_memory(target
, copy_p
, 1, 1, &byte
);
1805 cfi_add_byte(bank
, current_word
, byte
);
1807 retval
= cfi_write_word(bank
, current_word
, write_p
);
1808 if (retval
!= ERROR_OK
)
1812 /* return to read array mode */
1813 cfi_command(bank
, 0xf0, current_word
);
1814 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, current_word
);
1815 cfi_command(bank
, 0xff, current_word
);
1816 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, current_word
);
1821 void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t
*bank
, void *param
)
1823 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1824 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
1826 pri_ext
->_reversed_geometry
= 1;
1829 void cfi_fixup_0002_erase_regions(flash_bank_t
*bank
, void *param
)
1832 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1833 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
1835 if ((pri_ext
->_reversed_geometry
) || (pri_ext
->TopBottom
== 3))
1837 DEBUG("swapping reversed erase region information on cmdset 0002 device");
1839 for (i
= 0; i
< cfi_info
->num_erase_regions
/ 2; i
++)
1841 int j
= (cfi_info
->num_erase_regions
- 1) - i
;
1844 swap
= cfi_info
->erase_region_info
[i
];
1845 cfi_info
->erase_region_info
[i
] = cfi_info
->erase_region_info
[j
];
1846 cfi_info
->erase_region_info
[j
] = swap
;
1851 void cfi_fixup_0002_unlock_addresses(flash_bank_t
*bank
, void *param
)
1853 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1854 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
1855 cfi_unlock_addresses_t
*unlock_addresses
= param
;
1857 pri_ext
->_unlock1
= unlock_addresses
->unlock1
;
1858 pri_ext
->_unlock2
= unlock_addresses
->unlock2
;
1861 int cfi_probe(struct flash_bank_s
*bank
)
1863 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
1864 target_t
*target
= bank
->target
;
1866 int num_sectors
= 0;
1870 u32 unlock1
= 0x555;
1871 u32 unlock2
= 0x2aa;
1873 cfi_info
->probed
= 0;
1875 /* JEDEC standard JESD21C uses 0x5555 and 0x2aaa as unlock addresses,
1876 * while CFI compatible AMD/Spansion flashes use 0x555 and 0x2aa
1878 if (cfi_info
->jedec_probe
)
1884 /* switch to read identifier codes mode ("AUTOSELECT") */
1885 cfi_command(bank
, 0xaa, command
);
1886 target
->type
->write_memory(target
, flash_address(bank
, 0, unlock1
), bank
->bus_width
, 1, command
);
1887 cfi_command(bank
, 0x55, command
);
1888 target
->type
->write_memory(target
, flash_address(bank
, 0, unlock2
), bank
->bus_width
, 1, command
);
1889 cfi_command(bank
, 0x90, command
);
1890 target
->type
->write_memory(target
, flash_address(bank
, 0, unlock1
), bank
->bus_width
, 1, command
);
1892 if (bank
->chip_width
== 1)
1894 u8 manufacturer
, device_id
;
1895 target_read_u8(target
, bank
->base
+ 0x0, &manufacturer
);
1896 target_read_u8(target
, bank
->base
+ 0x1, &device_id
);
1897 cfi_info
->manufacturer
= manufacturer
;
1898 cfi_info
->device_id
= device_id
;
1900 else if (bank
->chip_width
== 2)
1902 target_read_u16(target
, bank
->base
+ 0x0, &cfi_info
->manufacturer
);
1903 target_read_u16(target
, bank
->base
+ 0x2, &cfi_info
->device_id
);
1906 /* switch back to read array mode */
1907 cfi_command(bank
, 0xf0, command
);
1908 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x00), bank
->bus_width
, 1, command
);
1909 cfi_command(bank
, 0xff, command
);
1910 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x00), bank
->bus_width
, 1, command
);
1912 cfi_fixup(bank
, cfi_jedec_fixups
);
1914 /* query only if this is a CFI compatible flash,
1915 * otherwise the relevant info has already been filled in
1917 if (cfi_info
->not_cfi
== 0)
1919 /* enter CFI query mode
1920 * according to JEDEC Standard No. 68.01,
1921 * a single bus sequence with address = 0x55, data = 0x98 should put
1922 * the device into CFI query mode.
1924 * SST flashes clearly violate this, and we will consider them incompatbile for now
1926 cfi_command(bank
, 0x98, command
);
1927 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x55), bank
->bus_width
, 1, command
);
1929 cfi_info
->qry
[0] = cfi_query_u8(bank
, 0, 0x10);
1930 cfi_info
->qry
[1] = cfi_query_u8(bank
, 0, 0x11);
1931 cfi_info
->qry
[2] = cfi_query_u8(bank
, 0, 0x12);
1933 DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2]);
1935 if ((cfi_info
->qry
[0] != 'Q') || (cfi_info
->qry
[1] != 'R') || (cfi_info
->qry
[2] != 'Y'))
1937 cfi_command(bank
, 0xf0, command
);
1938 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
1939 cfi_command(bank
, 0xff, command
);
1940 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
1941 return ERROR_FLASH_BANK_INVALID
;
1944 cfi_info
->pri_id
= cfi_query_u16(bank
, 0, 0x13);
1945 cfi_info
->pri_addr
= cfi_query_u16(bank
, 0, 0x15);
1946 cfi_info
->alt_id
= cfi_query_u16(bank
, 0, 0x17);
1947 cfi_info
->alt_addr
= cfi_query_u16(bank
, 0, 0x19);
1949 DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2], cfi_info
->pri_id
, cfi_info
->pri_addr
, cfi_info
->alt_id
, cfi_info
->alt_addr
);
1951 cfi_info
->vcc_min
= cfi_query_u8(bank
, 0, 0x1b);
1952 cfi_info
->vcc_max
= cfi_query_u8(bank
, 0, 0x1c);
1953 cfi_info
->vpp_min
= cfi_query_u8(bank
, 0, 0x1d);
1954 cfi_info
->vpp_max
= cfi_query_u8(bank
, 0, 0x1e);
1955 cfi_info
->word_write_timeout_typ
= cfi_query_u8(bank
, 0, 0x1f);
1956 cfi_info
->buf_write_timeout_typ
= cfi_query_u8(bank
, 0, 0x20);
1957 cfi_info
->block_erase_timeout_typ
= cfi_query_u8(bank
, 0, 0x21);
1958 cfi_info
->chip_erase_timeout_typ
= cfi_query_u8(bank
, 0, 0x22);
1959 cfi_info
->word_write_timeout_max
= cfi_query_u8(bank
, 0, 0x23);
1960 cfi_info
->buf_write_timeout_max
= cfi_query_u8(bank
, 0, 0x24);
1961 cfi_info
->block_erase_timeout_max
= cfi_query_u8(bank
, 0, 0x25);
1962 cfi_info
->chip_erase_timeout_max
= cfi_query_u8(bank
, 0, 0x26);
1964 DEBUG("Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x",
1965 (cfi_info
->vcc_min
& 0xf0) >> 4, cfi_info
->vcc_min
& 0x0f,
1966 (cfi_info
->vcc_max
& 0xf0) >> 4, cfi_info
->vcc_max
& 0x0f,
1967 (cfi_info
->vpp_min
& 0xf0) >> 4, cfi_info
->vpp_min
& 0x0f,
1968 (cfi_info
->vpp_max
& 0xf0) >> 4, cfi_info
->vpp_max
& 0x0f);
1969 DEBUG("typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u", 1 << cfi_info
->word_write_timeout_typ
, 1 << cfi_info
->buf_write_timeout_typ
,
1970 1 << cfi_info
->block_erase_timeout_typ
, 1 << cfi_info
->chip_erase_timeout_typ
);
1971 DEBUG("max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u", (1 << cfi_info
->word_write_timeout_max
) * (1 << cfi_info
->word_write_timeout_typ
),
1972 (1 << cfi_info
->buf_write_timeout_max
) * (1 << cfi_info
->buf_write_timeout_typ
),
1973 (1 << cfi_info
->block_erase_timeout_max
) * (1 << cfi_info
->block_erase_timeout_typ
),
1974 (1 << cfi_info
->chip_erase_timeout_max
) * (1 << cfi_info
->chip_erase_timeout_typ
));
1976 cfi_info
->dev_size
= cfi_query_u8(bank
, 0, 0x27);
1977 cfi_info
->interface_desc
= cfi_query_u16(bank
, 0, 0x28);
1978 cfi_info
->max_buf_write_size
= cfi_query_u16(bank
, 0, 0x2a);
1979 cfi_info
->num_erase_regions
= cfi_query_u8(bank
, 0, 0x2c);
1981 DEBUG("size: 0x%x, interface desc: %i, max buffer write size: %x", 1 << cfi_info
->dev_size
, cfi_info
->interface_desc
, (1 << cfi_info
->max_buf_write_size
));
1983 if (((1 << cfi_info
->dev_size
) * bank
->bus_width
/ bank
->chip_width
) != bank
->size
)
1985 WARNING("configuration specifies 0x%x size, but a 0x%x size flash was found", bank
->size
, 1 << cfi_info
->dev_size
);
1988 if (cfi_info
->num_erase_regions
)
1990 cfi_info
->erase_region_info
= malloc(4 * cfi_info
->num_erase_regions
);
1991 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++)
1993 cfi_info
->erase_region_info
[i
] = cfi_query_u32(bank
, 0, 0x2d + (4 * i
));
1994 DEBUG("erase region[%i]: %i blocks of size 0x%x", i
, (cfi_info
->erase_region_info
[i
] & 0xffff) + 1, (cfi_info
->erase_region_info
[i
] >> 16) * 256);
1999 cfi_info
->erase_region_info
= NULL
;
2002 /* We need to read the primary algorithm extended query table before calculating
2003 * the sector layout to be able to apply fixups
2005 switch(cfi_info
->pri_id
)
2007 /* Intel command set (standard and extended) */
2010 cfi_read_intel_pri_ext(bank
);
2012 /* AMD/Spansion, Atmel, ... command set */
2014 cfi_read_0002_pri_ext(bank
);
2017 ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2021 /* return to read array mode
2022 * we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
2024 cfi_command(bank
, 0xf0, command
);
2025 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
2026 cfi_command(bank
, 0xff, command
);
2027 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
2030 /* apply fixups depending on the primary command set */
2031 switch(cfi_info
->pri_id
)
2033 /* Intel command set (standard and extended) */
2036 cfi_fixup(bank
, cfi_0001_fixups
);
2038 /* AMD/Spansion, Atmel, ... command set */
2040 cfi_fixup(bank
, cfi_0002_fixups
);
2043 ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2047 if (cfi_info
->num_erase_regions
== 0)
2049 /* a device might have only one erase block, spanning the whole device */
2050 bank
->num_sectors
= 1;
2051 bank
->sectors
= malloc(sizeof(flash_sector_t
));
2053 bank
->sectors
[sector
].offset
= 0x0;
2054 bank
->sectors
[sector
].size
= bank
->size
;
2055 bank
->sectors
[sector
].is_erased
= -1;
2056 bank
->sectors
[sector
].is_protected
= -1;
2060 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++)
2062 num_sectors
+= (cfi_info
->erase_region_info
[i
] & 0xffff) + 1;
2065 bank
->num_sectors
= num_sectors
;
2066 bank
->sectors
= malloc(sizeof(flash_sector_t
) * num_sectors
);
2068 for (i
= 0; i
< cfi_info
->num_erase_regions
; i
++)
2071 for (j
= 0; j
< (cfi_info
->erase_region_info
[i
] & 0xffff) + 1; j
++)
2073 bank
->sectors
[sector
].offset
= offset
;
2074 bank
->sectors
[sector
].size
= ((cfi_info
->erase_region_info
[i
] >> 16) * 256) * bank
->bus_width
/ bank
->chip_width
;
2075 offset
+= bank
->sectors
[sector
].size
;
2076 bank
->sectors
[sector
].is_erased
= -1;
2077 bank
->sectors
[sector
].is_protected
= -1;
2083 cfi_info
->probed
= 1;
2088 int cfi_auto_probe(struct flash_bank_s
*bank
)
2090 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2091 if (cfi_info
->probed
)
2093 return cfi_probe(bank
);
2096 int cfi_erase_check(struct flash_bank_s
*bank
)
2098 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2099 target_t
*target
= bank
->target
;
2103 if (!cfi_info
->erase_check_algorithm
)
2105 u32 erase_check_code
[] =
2107 0xe4d03001, /* ldrb r3, [r0], #1 */
2108 0xe0022003, /* and r2, r2, r3 */
2109 0xe2511001, /* subs r1, r1, #1 */
2110 0x1afffffb, /* b -4 */
2111 0xeafffffe /* b 0 */
2114 /* make sure we have a working area */
2115 if (target_alloc_working_area(target
, 20, &cfi_info
->erase_check_algorithm
) != ERROR_OK
)
2117 WARNING("no working area available, falling back to slow memory reads");
2121 u8 erase_check_code_buf
[5 * 4];
2123 for (i
= 0; i
< 5; i
++)
2124 target_buffer_set_u32(target
, erase_check_code_buf
+ (i
*4), erase_check_code
[i
]);
2126 /* write algorithm code to working area */
2127 target
->type
->write_memory(target
, cfi_info
->erase_check_algorithm
->address
, 4, 5, erase_check_code_buf
);
2131 if (!cfi_info
->erase_check_algorithm
)
2133 u32
*buffer
= malloc(4096);
2135 for (i
= 0; i
< bank
->num_sectors
; i
++)
2137 u32 address
= bank
->base
+ bank
->sectors
[i
].offset
;
2138 u32 size
= bank
->sectors
[i
].size
;
2139 u32 check
= 0xffffffffU
;
2144 u32 thisrun_size
= (size
> 4096) ? 4096 : size
;
2147 target
->type
->read_memory(target
, address
, 4, thisrun_size
/ 4, (u8
*)buffer
);
2149 for (j
= 0; j
< thisrun_size
/ 4; j
++)
2152 if (check
!= 0xffffffff)
2158 size
-= thisrun_size
;
2159 address
+= thisrun_size
;
2162 bank
->sectors
[i
].is_erased
= erased
;
2169 for (i
= 0; i
< bank
->num_sectors
; i
++)
2171 u32 address
= bank
->base
+ bank
->sectors
[i
].offset
;
2172 u32 size
= bank
->sectors
[i
].size
;
2174 reg_param_t reg_params
[3];
2175 armv4_5_algorithm_t armv4_5_info
;
2177 armv4_5_info
.common_magic
= ARMV4_5_COMMON_MAGIC
;
2178 armv4_5_info
.core_mode
= ARMV4_5_MODE_SVC
;
2179 armv4_5_info
.core_state
= ARMV4_5_STATE_ARM
;
2181 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
2182 buf_set_u32(reg_params
[0].value
, 0, 32, address
);
2184 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
2185 buf_set_u32(reg_params
[1].value
, 0, 32, size
);
2187 init_reg_param(®_params
[2], "r2", 32, PARAM_IN_OUT
);
2188 buf_set_u32(reg_params
[2].value
, 0, 32, 0xff);
2190 if ((retval
= target
->type
->run_algorithm(target
, 0, NULL
, 3, reg_params
, cfi_info
->erase_check_algorithm
->address
, cfi_info
->erase_check_algorithm
->address
+ 0x10, 10000, &armv4_5_info
)) != ERROR_OK
)
2191 return ERROR_FLASH_OPERATION_FAILED
;
2193 if (buf_get_u32(reg_params
[2].value
, 0, 32) == 0xff)
2194 bank
->sectors
[i
].is_erased
= 1;
2196 bank
->sectors
[i
].is_erased
= 0;
2198 destroy_reg_param(®_params
[0]);
2199 destroy_reg_param(®_params
[1]);
2200 destroy_reg_param(®_params
[2]);
2207 int cfi_intel_protect_check(struct flash_bank_s
*bank
)
2209 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2210 cfi_intel_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
2211 target_t
*target
= bank
->target
;
2212 u8 command
[CFI_MAX_BUS_WIDTH
];
2215 /* check if block lock bits are supported on this device */
2216 if (!(pri_ext
->blk_status_reg_mask
& 0x1))
2217 return ERROR_FLASH_OPERATION_FAILED
;
2219 cfi_command(bank
, 0x90, command
);
2220 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x55), bank
->bus_width
, 1, command
);
2222 for (i
= 0; i
< bank
->num_sectors
; i
++)
2224 u8 block_status
= cfi_get_u8(bank
, i
, 0x2);
2226 if (block_status
& 1)
2227 bank
->sectors
[i
].is_protected
= 1;
2229 bank
->sectors
[i
].is_protected
= 0;
2232 cfi_command(bank
, 0xff, command
);
2233 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
2238 int cfi_spansion_protect_check(struct flash_bank_s
*bank
)
2240 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2241 cfi_spansion_pri_ext_t
*pri_ext
= cfi_info
->pri_ext
;
2242 target_t
*target
= bank
->target
;
2246 cfi_command(bank
, 0xaa, command
);
2247 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
);
2249 cfi_command(bank
, 0x55, command
);
2250 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock2
), bank
->bus_width
, 1, command
);
2252 cfi_command(bank
, 0x90, command
);
2253 target
->type
->write_memory(target
, flash_address(bank
, 0, pri_ext
->_unlock1
), bank
->bus_width
, 1, command
);
2255 for (i
= 0; i
< bank
->num_sectors
; i
++)
2257 u8 block_status
= cfi_get_u8(bank
, i
, 0x2);
2259 if (block_status
& 1)
2260 bank
->sectors
[i
].is_protected
= 1;
2262 bank
->sectors
[i
].is_protected
= 0;
2265 cfi_command(bank
, 0xf0, command
);
2266 target
->type
->write_memory(target
, flash_address(bank
, 0, 0x0), bank
->bus_width
, 1, command
);
2271 int cfi_protect_check(struct flash_bank_s
*bank
)
2273 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2275 if (cfi_info
->qry
[0] != 'Q')
2276 return ERROR_FLASH_BANK_NOT_PROBED
;
2278 switch(cfi_info
->pri_id
)
2282 return cfi_intel_protect_check(bank
);
2285 return cfi_spansion_protect_check(bank
);
2288 ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
2295 int cfi_info(struct flash_bank_s
*bank
, char *buf
, int buf_size
)
2298 cfi_flash_bank_t
*cfi_info
= bank
->driver_priv
;
2300 if (cfi_info
->qry
[0] == (char)-1)
2302 printed
= snprintf(buf
, buf_size
, "\ncfi flash bank not probed yet\n");
2306 printed
= snprintf(buf
, buf_size
, "\ncfi information:\n");
2308 buf_size
-= printed
;
2310 printed
= snprintf(buf
, buf_size
, "\nmfr: 0x%4.4x, id:0x%4.4x\n",
2311 cfi_info
->manufacturer
, cfi_info
->device_id
);
2313 buf_size
-= printed
;
2315 printed
= snprintf(buf
, buf_size
, "qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x\n", cfi_info
->qry
[0], cfi_info
->qry
[1], cfi_info
->qry
[2], cfi_info
->pri_id
, cfi_info
->pri_addr
, cfi_info
->alt_id
, cfi_info
->alt_addr
);
2317 buf_size
-= printed
;
2319 printed
= snprintf(buf
, buf_size
, "Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x\n", (cfi_info
->vcc_min
& 0xf0) >> 4, cfi_info
->vcc_min
& 0x0f,
2320 (cfi_info
->vcc_max
& 0xf0) >> 4, cfi_info
->vcc_max
& 0x0f,
2321 (cfi_info
->vpp_min
& 0xf0) >> 4, cfi_info
->vpp_min
& 0x0f,
2322 (cfi_info
->vpp_max
& 0xf0) >> 4, cfi_info
->vpp_max
& 0x0f);
2324 buf_size
-= printed
;
2326 printed
= snprintf(buf
, buf_size
, "typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u\n", 1 << cfi_info
->word_write_timeout_typ
, 1 << cfi_info
->buf_write_timeout_typ
,
2327 1 << cfi_info
->block_erase_timeout_typ
, 1 << cfi_info
->chip_erase_timeout_typ
);
2329 buf_size
-= printed
;
2331 printed
= snprintf(buf
, buf_size
, "max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u\n", (1 << cfi_info
->word_write_timeout_max
) * (1 << cfi_info
->word_write_timeout_typ
),
2332 (1 << cfi_info
->buf_write_timeout_max
) * (1 << cfi_info
->buf_write_timeout_typ
),
2333 (1 << cfi_info
->block_erase_timeout_max
) * (1 << cfi_info
->block_erase_timeout_typ
),
2334 (1 << cfi_info
->chip_erase_timeout_max
) * (1 << cfi_info
->chip_erase_timeout_typ
));
2336 buf_size
-= printed
;
2338 printed
= snprintf(buf
, buf_size
, "size: 0x%x, interface desc: %i, max buffer write size: %x\n", 1 << cfi_info
->dev_size
, cfi_info
->interface_desc
, cfi_info
->max_buf_write_size
);
2340 buf_size
-= printed
;
2342 switch(cfi_info
->pri_id
)
2346 cfi_intel_info(bank
, buf
, buf_size
);
2349 cfi_spansion_info(bank
, buf
, buf_size
);
2352 ERROR("cfi primary command set %i unsupported", cfi_info
->pri_id
);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)