1 /***************************************************************************
2 * Copyright (C) 2010 by Spencer Oliver *
3 * spen@spen-soft.co.uk *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
19 ***************************************************************************/
22 * NAND controller interface for Nuvoton NUC910
32 #include <target/arm.h>
34 struct nuc910_nand_controller
{
35 struct arm_nand_data io
;
38 static int validate_target_state(struct nand_device
*nand
)
40 struct target
*target
= nand
->target
;
42 if (target
->state
!= TARGET_HALTED
) {
43 LOG_ERROR("Target not halted");
44 return ERROR_NAND_OPERATION_FAILED
;
50 static int nuc910_nand_command(struct nand_device
*nand
, uint8_t command
)
52 struct target
*target
= nand
->target
;
55 result
= validate_target_state(nand
);
56 if (result
!= ERROR_OK
)
59 target_write_u8(target
, NUC910_SMCMD
, command
);
63 static int nuc910_nand_address(struct nand_device
*nand
, uint8_t address
)
65 struct target
*target
= nand
->target
;
68 result
= validate_target_state(nand
);
69 if (result
!= ERROR_OK
)
72 target_write_u32(target
, NUC910_SMADDR
, ((address
& 0xff) | NUC910_SMADDR_EOA
));
76 static int nuc910_nand_read(struct nand_device
*nand
, void *data
)
78 struct target
*target
= nand
->target
;
81 result
= validate_target_state(nand
);
82 if (result
!= ERROR_OK
)
85 target_read_u8(target
, NUC910_SMDATA
, data
);
89 static int nuc910_nand_write(struct nand_device
*nand
, uint16_t data
)
91 struct target
*target
= nand
->target
;
94 result
= validate_target_state(nand
);
95 if (result
!= ERROR_OK
)
98 target_write_u8(target
, NUC910_SMDATA
, data
);
102 static int nuc910_nand_read_block_data(struct nand_device
*nand
,
103 uint8_t *data
, int data_size
)
105 struct nuc910_nand_controller
*nuc910_nand
= nand
->controller_priv
;
108 result
= validate_target_state(nand
);
109 if (result
!= ERROR_OK
)
112 nuc910_nand
->io
.chunk_size
= nand
->page_size
;
114 /* try the fast way first */
115 result
= arm_nandread(&nuc910_nand
->io
, data
, data_size
);
116 if (result
!= ERROR_NAND_NO_BUFFER
)
119 /* else do it slowly */
121 nuc910_nand_read(nand
, data
++);
126 static int nuc910_nand_write_block_data(struct nand_device
*nand
,
127 uint8_t *data
, int data_size
)
129 struct nuc910_nand_controller
*nuc910_nand
= nand
->controller_priv
;
132 result
= validate_target_state(nand
);
133 if (result
!= ERROR_OK
)
136 nuc910_nand
->io
.chunk_size
= nand
->page_size
;
138 /* try the fast way first */
139 result
= arm_nandwrite(&nuc910_nand
->io
, data
, data_size
);
140 if (result
!= ERROR_NAND_NO_BUFFER
)
143 /* else do it slowly */
145 nuc910_nand_write(nand
, *data
++);
150 static int nuc910_nand_reset(struct nand_device
*nand
)
152 return nuc910_nand_command(nand
, NAND_CMD_RESET
);
155 static int nuc910_nand_ready(struct nand_device
*nand
, int timeout
)
157 struct target
*target
= nand
->target
;
161 target_read_u32(target
, NUC910_SMISR
, &status
);
162 if (status
& NUC910_SMISR_RB_
)
165 } while (timeout
-- > 0);
170 NAND_DEVICE_COMMAND_HANDLER(nuc910_nand_device_command
)
172 struct nuc910_nand_controller
*nuc910_nand
;
174 nuc910_nand
= calloc(1, sizeof(struct nuc910_nand_controller
));
176 LOG_ERROR("no memory for nand controller");
177 return ERROR_NAND_DEVICE_INVALID
;
180 nand
->controller_priv
= nuc910_nand
;
184 static int nuc910_nand_init(struct nand_device
*nand
)
186 struct nuc910_nand_controller
*nuc910_nand
= nand
->controller_priv
;
187 struct target
*target
= nand
->target
;
188 int bus_width
= nand
->bus_width
? : 8;
191 result
= validate_target_state(nand
);
192 if (result
!= ERROR_OK
)
195 /* nuc910 only supports 8bit */
196 if (bus_width
!= 8) {
197 LOG_ERROR("nuc910 only supports 8 bit bus width, not %i", bus_width
);
198 return ERROR_NAND_OPERATION_NOT_SUPPORTED
;
201 /* inform calling code about selected bus width */
202 nand
->bus_width
= bus_width
;
204 nuc910_nand
->io
.target
= target
;
205 nuc910_nand
->io
.data
= NUC910_SMDATA
;
206 nuc910_nand
->io
.op
= ARM_NAND_NONE
;
208 /* configure nand controller */
209 target_write_u32(target
, NUC910_FMICSR
, NUC910_FMICSR_SM_EN
);
210 target_write_u32(target
, NUC910_SMCSR
, 0x010000a8); /* 2048 page size */
211 target_write_u32(target
, NUC910_SMTCR
, 0x00010204);
212 target_write_u32(target
, NUC910_SMIER
, 0x00000000);
217 struct nand_flash_controller nuc910_nand_controller
= {
219 .command
= nuc910_nand_command
,
220 .address
= nuc910_nand_address
,
221 .read_data
= nuc910_nand_read
,
222 .write_data
= nuc910_nand_write
,
223 .write_block_data
= nuc910_nand_write_block_data
,
224 .read_block_data
= nuc910_nand_read_block_data
,
225 .nand_ready
= nuc910_nand_ready
,
226 .reset
= nuc910_nand_reset
,
227 .nand_device_command
= nuc910_nand_device_command
,
228 .init
= nuc910_nand_init
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)