1 /***************************************************************************
2 * Copyright (C) 2011 by Rodrigo L. Rosa *
3 * rodrigorosa.LG@gmail.com *
5 * Based on a file written by: *
10 * This program is free software; you can redistribute it and/or modify *
11 * it under the terms of the GNU General Public License as published by *
12 * the Free Software Foundation; either version 2 of the License, or *
13 * (at your option) any later version. *
15 * This program is distributed in the hope that it will be useful, *
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
18 * GNU General Public License for more details. *
20 * You should have received a copy of the GNU General Public License *
21 * along with this program; if not, write to the *
22 * Free Software Foundation, Inc., *
23 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
24 ***************************************************************************/
27 * @file dsp5680xx_flash.c
28 * @author Rodrigo L. Rosa <rodrigorosa.LG@gmail.com>
29 * @date Thu Jun 9 18:21:58 2011
31 * @brief This file implements the basic functions to run flashing commands
32 * from the TCL interface.
33 * It allows the user to flash the Freescale 5680xx DSP.
43 #include <helper/binarybuffer.h>
44 #include <helper/time_support.h>
45 #include <target/algorithm.h>
46 #include <target/dsp5680xx.h>
48 static int dsp5680xx_build_sector_list(struct flash_bank
*bank
)
50 uint32_t offset
= HFM_FLASH_BASE_ADDR
;
52 bank
->sectors
= malloc(sizeof(struct flash_sector
) * bank
->num_sectors
);
55 for (i
= 0; i
< bank
->num_sectors
; ++i
) {
56 bank
->sectors
[i
].offset
= i
* HFM_SECTOR_SIZE
;
57 bank
->sectors
[i
].size
= HFM_SECTOR_SIZE
;
58 offset
+= bank
->sectors
[i
].size
;
59 bank
->sectors
[i
].is_erased
= -1;
60 bank
->sectors
[i
].is_protected
= -1;
62 LOG_USER("%s not tested yet.", __func__
);
67 /* flash bank dsp5680xx 0 0 0 0 <target#> */
68 FLASH_BANK_COMMAND_HANDLER(dsp5680xx_flash_bank_command
)
70 bank
->base
= HFM_FLASH_BASE_ADDR
;
71 bank
->size
= HFM_SIZE_BYTES
; /* top 4k not accessible */
72 bank
->num_sectors
= HFM_SECTOR_COUNT
;
73 dsp5680xx_build_sector_list(bank
);
79 * A memory mapped register (PROT) holds information regarding sector protection.
80 * Protection refers to undesired core access.
81 * The value in this register is loaded from flash upon reset.
87 static int dsp5680xx_flash_protect_check(struct flash_bank
*bank
)
89 int retval
= ERROR_OK
;
91 uint16_t protected = 0;
93 retval
= dsp5680xx_f_protect_check(bank
->target
, &protected);
94 if (retval
!= ERROR_OK
) {
95 for (int i
= 0; i
< HFM_SECTOR_COUNT
; i
++)
96 bank
->sectors
[i
].is_protected
= -1;
99 for (int i
= 0; i
< HFM_SECTOR_COUNT
/ 2; i
++) {
101 bank
->sectors
[2 * i
].is_protected
= 1;
102 bank
->sectors
[2 * i
+ 1].is_protected
= 1;
104 bank
->sectors
[2 * i
].is_protected
= 0;
105 bank
->sectors
[2 * i
+ 1].is_protected
= 0;
107 protected = (protected >> 1);
113 * Protection funcionality is not implemented.
114 * The current implementation applies/removes security on the chip.
115 * The chip is effectively secured/unsecured after the first reset
116 * following the execution of this function.
119 * @param set Apply or remove security on the chip.
120 * @param first This parameter is ignored.
121 * @param last This parameter is ignored.
125 static int dsp5680xx_flash_protect(struct flash_bank
*bank
, int set
, int first
,
129 * This applies security to flash module after next reset, it does
130 * not actually apply protection (protection refers to undesired access from the core)
135 retval
= dsp5680xx_f_lock(bank
->target
);
137 retval
= dsp5680xx_f_unlock(bank
->target
);
138 if (retval
== ERROR_OK
) {
139 /* mark all as erased */
140 for (int i
= 0; i
<= (HFM_SECTOR_COUNT
- 1); i
++)
141 /* FM does not recognize it as erased if erased via JTAG. */
142 bank
->sectors
[i
].is_erased
= 1;
149 * The dsp5680xx use word addressing. The "/2" that appear in the following code
150 * are a workaround for the fact that OpenOCD uses byte addressing.
153 * @param buffer Data to write to flash.
155 * @param count In bytes (2 bytes per address).
159 static int dsp5680xx_flash_write(struct flash_bank
*bank
, uint8_t * buffer
,
160 uint32_t offset
, uint32_t count
)
164 if ((offset
+ count
/ 2) > bank
->size
) {
165 LOG_ERROR("%s: Flash bank cannot fit data.", __func__
);
170 * Writing to odd addresses not supported.
171 * This chip uses word addressing, Openocd only supports byte addressing.
172 * The workaround results in disabling writing to odd byte addresses
174 LOG_ERROR("%s: Writing to odd addresses not supported for this target", __func__
);
177 retval
= dsp5680xx_f_wr(bank
->target
, buffer
, bank
->base
+ offset
/ 2, count
, 0);
180 for (addr_word
= bank
->base
+ offset
/ 2; addr_word
< count
/ 2;
181 addr_word
+= (HFM_SECTOR_SIZE
/ 2)) {
182 if (retval
== ERROR_OK
)
183 bank
->sectors
[addr_word
/ (HFM_SECTOR_SIZE
/ 2)].is_erased
= 0;
185 bank
->sectors
[addr_word
/ (HFM_SECTOR_SIZE
/ 2)].is_erased
= -1;
190 static int dsp5680xx_probe(struct flash_bank
*bank
)
192 LOG_DEBUG("%s not implemented", __func__
);
196 static int dsp5680xx_flash_info(struct flash_bank
*bank
, char *buf
,
199 snprintf(buf
, buf_size
,
200 "\ndsp5680xx flash driver info:\n - See comments in code.");
205 * The flash module (FM) on the dsp5680xx supports both individual sector
206 * and mass erase of the flash memory.
207 * If this function is called with @first == @last == 0 or if @first is the
208 * first sector (#0) and @last is the last sector then the mass erase command
209 * is executed (much faster than erasing each sector individually).
217 static int dsp5680xx_flash_erase(struct flash_bank
*bank
, int first
, int last
)
221 retval
= dsp5680xx_f_erase(bank
->target
, (uint32_t) first
, (uint32_t) last
);
222 if ((!(first
| last
)) || ((first
== 0) && (last
== (HFM_SECTOR_COUNT
- 1))))
223 last
= HFM_SECTOR_COUNT
- 1;
224 if (retval
== ERROR_OK
)
225 for (int i
= first
; i
<= last
; i
++)
226 bank
->sectors
[i
].is_erased
= 1;
229 * If an error occurred unknown status
230 *is set even though some sector could have been correctly erased.
232 for (int i
= first
; i
<= last
; i
++)
233 bank
->sectors
[i
].is_erased
= -1;
238 * The flash module (FM) on the dsp5680xx support a blank check function.
239 * This function executes the FM's blank check functionality on each and every sector.
245 static int dsp5680xx_flash_erase_check(struct flash_bank
*bank
)
247 int retval
= ERROR_OK
;
253 for (i
= 0; i
< HFM_SECTOR_COUNT
; i
++) {
254 if (bank
->sectors
[i
].is_erased
== -1) {
255 retval
= dsp5680xx_f_erase_check(bank
->target
, &erased
, i
);
256 if (retval
!= ERROR_OK
) {
257 bank
->sectors
[i
].is_erased
= -1;
260 bank
->sectors
[i
].is_erased
= 1;
262 bank
->sectors
[i
].is_erased
= 0;
269 struct flash_driver dsp5680xx_flash
= {
270 .name
= "dsp5680xx_flash",
271 .flash_bank_command
= dsp5680xx_flash_bank_command
,
272 .erase
= dsp5680xx_flash_erase
,
273 .protect
= dsp5680xx_flash_protect
,
274 .write
= dsp5680xx_flash_write
,
275 /* .read = default_flash_read, */
276 .probe
= dsp5680xx_probe
,
277 .auto_probe
= dsp5680xx_probe
,
278 .erase_check
= dsp5680xx_flash_erase_check
,
279 .protect_check
= dsp5680xx_flash_protect_check
,
280 .info
= dsp5680xx_flash_info
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)