1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * LPC1700 support Copyright (C) 2009 by Audrius Urmanavicius *
6 * didele.deze@gmail.com *
8 * This program is free software; you can redistribute it and/or modify *
9 * it under the terms of the GNU General Public License as published by *
10 * the Free Software Foundation; either version 2 of the License, or *
11 * (at your option) any later version. *
13 * This program is distributed in the hope that it will be useful, *
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
16 * GNU General Public License for more details. *
18 * You should have received a copy of the GNU General Public License *
19 * along with this program; if not, write to the *
20 * Free Software Foundation, Inc., *
21 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
22 ***************************************************************************/
29 #include <helper/binarybuffer.h>
30 #include <target/algorithm.h>
31 #include <target/arm_opcodes.h>
32 #include <target/armv7m.h>
36 * flash programming support for NXP LPC17xx and LPC2xxx devices.
38 * @todo Provide a way to update CCLK after declaring the flash bank. The value which is correct after chip reset will
39 * rarely still work right after the clocks switch to use the PLL (e.g. 4MHz --> 100 MHz).
42 * currently supported devices:
43 * variant 1 (lpc2000_v1):
51 * variant 2 (lpc2000_v2):
60 * - 176x (tested with LPC1768)
62 * lpc4300 (also available as lpc1800 - alias)
63 * - 43x2 | 3 | 5 | 7 (tested with LPC4337/LPC4357)
67 * - 810 | 1 | 2 (tested with LPC810/LPC812)
78 struct lpc2000_flash_bank
{
79 lpc2000_variant variant
;
81 int cmd51_dst_boundary
;
86 uint32_t cmd51_max_buffer
;
88 uint32_t iap_max_stack
;
89 uint32_t cmd51_src_offset
;
90 uint32_t lpc4300_bank
;
93 enum lpc2000_status_codes
{
94 LPC2000_CMD_SUCCESS
= 0,
95 LPC2000_INVALID_COMMAND
= 1,
96 LPC2000_SRC_ADDR_ERROR
= 2,
97 LPC2000_DST_ADDR_ERROR
= 3,
98 LPC2000_SRC_ADDR_NOT_MAPPED
= 4,
99 LPC2000_DST_ADDR_NOT_MAPPED
= 5,
100 LPC2000_COUNT_ERROR
= 6,
101 LPC2000_INVALID_SECTOR
= 7,
102 LPC2000_SECTOR_NOT_BLANK
= 8,
103 LPC2000_SECTOR_NOT_PREPARED
= 9,
104 LPC2000_COMPARE_ERROR
= 10,
106 LPC2000_PARAM_ERROR
= 12,
107 LPC2000_ADDR_ERROR
= 13,
108 LPC2000_ADDR_NOT_MAPPED
= 14,
109 LPC2000_CMD_NOT_LOCKED
= 15,
110 LPC2000_INVALID_CODE
= 16,
111 LPC2000_INVALID_BAUD_RATE
= 17,
112 LPC2000_INVALID_STOP_BIT
= 18,
113 LPC2000_CRP_ENABLED
= 19,
114 LPC2000_INVALID_FLASH_UNIT
= 20,
115 LPC2000_USER_CODE_CHECKSUM
= 21,
116 LCP2000_ERROR_SETTING_ACTIVE_PARTITION
= 22,
119 static int lpc2000_build_sector_list(struct flash_bank
*bank
)
121 struct lpc2000_flash_bank
*lpc2000_info
= bank
->driver_priv
;
124 /* default to a 4096 write buffer */
125 lpc2000_info
->cmd51_max_buffer
= 4096;
127 if (lpc2000_info
->variant
== lpc2000_v1
) {
128 /* variant 1 has different layout for 128kb and 256kb flashes */
129 if (bank
->size
== 128 * 1024) {
130 bank
->num_sectors
= 16;
131 bank
->sectors
= malloc(sizeof(struct flash_sector
) * 16);
132 for (int i
= 0; i
< 16; i
++) {
133 bank
->sectors
[i
].offset
= offset
;
134 bank
->sectors
[i
].size
= 8 * 1024;
135 offset
+= bank
->sectors
[i
].size
;
136 bank
->sectors
[i
].is_erased
= -1;
137 bank
->sectors
[i
].is_protected
= 1;
139 } else if (bank
->size
== 256 * 1024) {
140 bank
->num_sectors
= 18;
141 bank
->sectors
= malloc(sizeof(struct flash_sector
) * 18);
143 for (int i
= 0; i
< 8; i
++) {
144 bank
->sectors
[i
].offset
= offset
;
145 bank
->sectors
[i
].size
= 8 * 1024;
146 offset
+= bank
->sectors
[i
].size
;
147 bank
->sectors
[i
].is_erased
= -1;
148 bank
->sectors
[i
].is_protected
= 1;
150 for (int i
= 8; i
< 10; i
++) {
151 bank
->sectors
[i
].offset
= offset
;
152 bank
->sectors
[i
].size
= 64 * 1024;
153 offset
+= bank
->sectors
[i
].size
;
154 bank
->sectors
[i
].is_erased
= -1;
155 bank
->sectors
[i
].is_protected
= 1;
157 for (int i
= 10; i
< 18; i
++) {
158 bank
->sectors
[i
].offset
= offset
;
159 bank
->sectors
[i
].size
= 8 * 1024;
160 offset
+= bank
->sectors
[i
].size
;
161 bank
->sectors
[i
].is_erased
= -1;
162 bank
->sectors
[i
].is_protected
= 1;
165 LOG_ERROR("BUG: unknown bank->size encountered");
168 } else if (lpc2000_info
->variant
== lpc2000_v2
) {
169 /* variant 2 has a uniform layout, only number of sectors differs */
170 switch (bank
->size
) {
172 lpc2000_info
->cmd51_max_buffer
= 1024;
173 bank
->num_sectors
= 1;
176 lpc2000_info
->cmd51_max_buffer
= 1024;
177 bank
->num_sectors
= 2;
180 bank
->num_sectors
= 4;
183 bank
->num_sectors
= 8;
186 bank
->num_sectors
= 9;
189 bank
->num_sectors
= 11;
192 bank
->num_sectors
= 15;
195 bank
->num_sectors
= 27;
199 bank
->num_sectors
= 28;
202 LOG_ERROR("BUG: unknown bank->size encountered");
207 bank
->sectors
= malloc(sizeof(struct flash_sector
) * bank
->num_sectors
);
209 for (int i
= 0; i
< bank
->num_sectors
; i
++) {
211 bank
->sectors
[i
].offset
= offset
;
212 bank
->sectors
[i
].size
= 4 * 1024;
213 offset
+= bank
->sectors
[i
].size
;
214 bank
->sectors
[i
].is_erased
= -1;
215 bank
->sectors
[i
].is_protected
= 1;
217 bank
->sectors
[i
].offset
= offset
;
218 bank
->sectors
[i
].size
= 32 * 1024;
219 offset
+= bank
->sectors
[i
].size
;
220 bank
->sectors
[i
].is_erased
= -1;
221 bank
->sectors
[i
].is_protected
= 1;
223 bank
->sectors
[i
].offset
= offset
;
224 bank
->sectors
[i
].size
= 4 * 1024;
225 offset
+= bank
->sectors
[i
].size
;
226 bank
->sectors
[i
].is_erased
= -1;
227 bank
->sectors
[i
].is_protected
= 1;
230 } else if (lpc2000_info
->variant
== lpc1700
) {
231 switch (bank
->size
) {
233 lpc2000_info
->cmd51_max_buffer
= 256;
234 bank
->num_sectors
= 1;
237 lpc2000_info
->cmd51_max_buffer
= 512;
238 bank
->num_sectors
= 2;
241 lpc2000_info
->cmd51_max_buffer
= 512;
242 bank
->num_sectors
= 4;
245 lpc2000_info
->cmd51_max_buffer
= 1024;
246 bank
->num_sectors
= 8;
249 bank
->num_sectors
= 16;
252 bank
->num_sectors
= 18;
255 bank
->num_sectors
= 22;
258 bank
->num_sectors
= 30;
261 LOG_ERROR("BUG: unknown bank->size encountered");
265 bank
->sectors
= malloc(sizeof(struct flash_sector
) * bank
->num_sectors
);
267 for (int i
= 0; i
< bank
->num_sectors
; i
++) {
268 bank
->sectors
[i
].offset
= offset
;
269 /* sectors 0-15 are 4kB-sized, 16 and above are 32kB-sized for LPC17xx devices */
270 bank
->sectors
[i
].size
= (i
< 16) ? 4 * 1024 : 32 * 1024;
271 offset
+= bank
->sectors
[i
].size
;
272 bank
->sectors
[i
].is_erased
= -1;
273 bank
->sectors
[i
].is_protected
= 1;
275 } else if (lpc2000_info
->variant
== lpc4300
) {
276 switch (bank
->size
) {
278 bank
->num_sectors
= 11;
281 bank
->num_sectors
= 13;
284 bank
->num_sectors
= 15;
287 LOG_ERROR("BUG: unknown bank->size encountered");
291 bank
->sectors
= malloc(sizeof(struct flash_sector
) * bank
->num_sectors
);
293 for (int i
= 0; i
< bank
->num_sectors
; i
++) {
294 bank
->sectors
[i
].offset
= offset
;
295 /* sectors 0-7 are 8kB-sized, 8 and above are 64kB-sized for LPC43xx devices */
296 bank
->sectors
[i
].size
= (i
< 8) ? 8 * 1024 : 64 * 1024;
297 offset
+= bank
->sectors
[i
].size
;
298 bank
->sectors
[i
].is_erased
= -1;
299 bank
->sectors
[i
].is_protected
= 1;
302 } else if (lpc2000_info
->variant
== lpc800
) {
303 lpc2000_info
->cmd51_max_buffer
= 1024;
304 switch (bank
->size
) {
306 lpc2000_info
->cmd51_max_buffer
= 256;
307 bank
->num_sectors
= 4;
310 lpc2000_info
->cmd51_max_buffer
= 512;
311 bank
->num_sectors
= 8;
314 bank
->num_sectors
= 16;
317 LOG_ERROR("BUG: unknown bank->size encountered");
321 bank
->sectors
= malloc(sizeof(struct flash_sector
) * bank
->num_sectors
);
323 for (int i
= 0; i
< bank
->num_sectors
; i
++) {
324 bank
->sectors
[i
].offset
= offset
;
325 /* sectors 0-15 are 1kB-sized for LPC8xx devices */
326 bank
->sectors
[i
].size
= 1 * 1024;
327 offset
+= bank
->sectors
[i
].size
;
328 bank
->sectors
[i
].is_erased
= -1;
329 bank
->sectors
[i
].is_protected
= 1;
333 LOG_ERROR("BUG: unknown lpc2000_info->variant encountered");
340 /* this function allocates and initializes working area used for IAP algorithm
341 * uses 52 + max IAP stack bytes working area
342 * 0x0 to 0x7: jump gate (BX to thumb state, b -2 to wait)
343 * 0x8 to 0x1f: command parameter table (1+5 words)
344 * 0x20 to 0x33: command result table (1+4 words)
345 * 0x34 to 0xb3|0x104: stack (only 128b needed for lpc17xx/2000, 208 for lpc43xx and 148b for lpc8xx)
348 static int lpc2000_iap_working_area_init(struct flash_bank
*bank
, struct working_area
**iap_working_area
)
350 struct target
*target
= bank
->target
;
351 struct lpc2000_flash_bank
*lpc2000_info
= bank
->driver_priv
;
353 if (target_alloc_working_area(target
, 0x34 + lpc2000_info
->iap_max_stack
, iap_working_area
) != ERROR_OK
) {
354 LOG_ERROR("no working area specified, can't write LPC2000 internal flash");
355 return ERROR_FLASH_OPERATION_FAILED
;
358 uint8_t jump_gate
[8];
360 /* write IAP code to working area */
361 switch (lpc2000_info
->variant
) {
365 target_buffer_set_u32(target
, jump_gate
, ARMV4_5_T_BX(12));
366 target_buffer_set_u32(target
, jump_gate
+ 4, ARMV5_T_BKPT(0));
370 target_buffer_set_u32(target
, jump_gate
, ARMV4_5_BX(12));
371 target_buffer_set_u32(target
, jump_gate
+ 4, ARMV4_5_B(0xfffffe, 0));
374 LOG_ERROR("BUG: unknown lpc2000_info->variant encountered");
378 int retval
= target_write_memory(target
, (*iap_working_area
)->address
, 4, 2, jump_gate
);
379 if (retval
!= ERROR_OK
)
380 LOG_ERROR("Write memory at address 0x%8.8" PRIx32
" failed (check work_area definition)",
381 (*iap_working_area
)->address
);
386 /* call LPC1700/LPC2000 IAP function */
388 static int lpc2000_iap_call(struct flash_bank
*bank
, struct working_area
*iap_working_area
, int code
,
389 uint32_t param_table
[5], uint32_t result_table
[4])
391 struct lpc2000_flash_bank
*lpc2000_info
= bank
->driver_priv
;
392 struct target
*target
= bank
->target
;
394 struct arm_algorithm arm_algo
; /* for LPC2000 */
395 struct armv7m_algorithm armv7m_info
; /* for LPC1700 */
396 uint32_t iap_entry_point
= 0; /* to make compiler happier */
398 switch (lpc2000_info
->variant
) {
401 armv7m_info
.common_magic
= ARMV7M_COMMON_MAGIC
;
402 armv7m_info
.core_mode
= ARM_MODE_THREAD
;
403 iap_entry_point
= 0x1fff1ff1;
407 arm_algo
.common_magic
= ARM_COMMON_MAGIC
;
408 arm_algo
.core_mode
= ARM_MODE_SVC
;
409 arm_algo
.core_state
= ARM_STATE_ARM
;
410 iap_entry_point
= 0x7ffffff1;
413 armv7m_info
.common_magic
= ARMV7M_COMMON_MAGIC
;
414 armv7m_info
.core_mode
= ARM_MODE_THREAD
;
415 /* read out IAP entry point from ROM driver table at 0x10400100 */
416 target_read_u32(target
, 0x10400100, &iap_entry_point
);
419 LOG_ERROR("BUG: unknown lpc2000->variant encountered");
423 struct mem_param mem_params
[2];
425 /* command parameter table */
426 init_mem_param(&mem_params
[0], iap_working_area
->address
+ 8, 6 * 4, PARAM_OUT
);
427 target_buffer_set_u32(target
, mem_params
[0].value
, code
);
428 target_buffer_set_u32(target
, mem_params
[0].value
+ 0x04, param_table
[0]);
429 target_buffer_set_u32(target
, mem_params
[0].value
+ 0x08, param_table
[1]);
430 target_buffer_set_u32(target
, mem_params
[0].value
+ 0x0c, param_table
[2]);
431 target_buffer_set_u32(target
, mem_params
[0].value
+ 0x10, param_table
[3]);
432 target_buffer_set_u32(target
, mem_params
[0].value
+ 0x14, param_table
[4]);
434 struct reg_param reg_params
[5];
436 init_reg_param(®_params
[0], "r0", 32, PARAM_OUT
);
437 buf_set_u32(reg_params
[0].value
, 0, 32, iap_working_area
->address
+ 0x08);
439 /* command result table */
440 init_mem_param(&mem_params
[1], iap_working_area
->address
+ 0x20, 5 * 4, PARAM_IN
);
442 init_reg_param(®_params
[1], "r1", 32, PARAM_OUT
);
443 buf_set_u32(reg_params
[1].value
, 0, 32, iap_working_area
->address
+ 0x20);
445 /* IAP entry point */
446 init_reg_param(®_params
[2], "r12", 32, PARAM_OUT
);
447 buf_set_u32(reg_params
[2].value
, 0, 32, iap_entry_point
);
449 switch (lpc2000_info
->variant
) {
454 init_reg_param(®_params
[3], "sp", 32, PARAM_OUT
);
455 buf_set_u32(reg_params
[3].value
, 0, 32, iap_working_area
->address
+ lpc2000_info
->cmd51_src_offset
);
458 init_reg_param(®_params
[4], "lr", 32, PARAM_OUT
);
459 buf_set_u32(reg_params
[4].value
, 0, 32, (iap_working_area
->address
+ 0x04) | 1);
460 /* bit0 of LR = 1 to return in Thumb mode */
462 target_run_algorithm(target
, 2, mem_params
, 5, reg_params
, iap_working_area
->address
, 0, 10000,
468 init_reg_param(®_params
[3], "sp_svc", 32, PARAM_OUT
);
469 buf_set_u32(reg_params
[3].value
, 0, 32, iap_working_area
->address
+ lpc2000_info
->cmd51_src_offset
);
472 init_reg_param(®_params
[4], "lr_svc", 32, PARAM_OUT
);
473 buf_set_u32(reg_params
[4].value
, 0, 32, iap_working_area
->address
+ 0x04);
475 target_run_algorithm(target
, 2, mem_params
, 5, reg_params
, iap_working_area
->address
,
476 iap_working_area
->address
+ 0x4, 10000, &arm_algo
);
479 LOG_ERROR("BUG: unknown lpc2000->variant encountered");
483 int status_code
= target_buffer_get_u32(target
, mem_params
[1].value
);
484 result_table
[0] = target_buffer_get_u32(target
, mem_params
[1].value
+ 0x04);
485 result_table
[1] = target_buffer_get_u32(target
, mem_params
[1].value
+ 0x08);
486 result_table
[2] = target_buffer_get_u32(target
, mem_params
[1].value
+ 0x0c);
487 result_table
[3] = target_buffer_get_u32(target
, mem_params
[1].value
+ 0x10);
489 LOG_DEBUG("IAP command = %i (0x%8.8" PRIx32
", 0x%8.8" PRIx32
", 0x%8.8" PRIx32
", 0x%8.8" PRIx32
", 0x%8.8" PRIx32
490 ") completed with result = %8.8x",
491 code
, param_table
[0], param_table
[1], param_table
[2], param_table
[3], param_table
[4], status_code
);
493 destroy_mem_param(&mem_params
[0]);
494 destroy_mem_param(&mem_params
[1]);
496 destroy_reg_param(®_params
[0]);
497 destroy_reg_param(®_params
[1]);
498 destroy_reg_param(®_params
[2]);
499 destroy_reg_param(®_params
[3]);
500 destroy_reg_param(®_params
[4]);
505 static int lpc2000_iap_blank_check(struct flash_bank
*bank
, int first
, int last
)
507 if ((first
< 0) || (last
>= bank
->num_sectors
))
508 return ERROR_FLASH_SECTOR_INVALID
;
510 uint32_t param_table
[5] = {0};
511 uint32_t result_table
[4];
512 struct working_area
*iap_working_area
;
514 int retval
= lpc2000_iap_working_area_init(bank
, &iap_working_area
);
516 if (retval
!= ERROR_OK
)
519 struct lpc2000_flash_bank
*lpc2000_info
= bank
->driver_priv
;
520 if (lpc2000_info
->variant
== lpc4300
)
521 param_table
[2] = lpc2000_info
->lpc4300_bank
;
523 for (int i
= first
; i
<= last
&& retval
== ERROR_OK
; i
++) {
524 /* check single sector */
525 param_table
[0] = param_table
[1] = i
;
526 int status_code
= lpc2000_iap_call(bank
, iap_working_area
, 53, param_table
, result_table
);
528 switch (status_code
) {
529 case ERROR_FLASH_OPERATION_FAILED
:
530 retval
= ERROR_FLASH_OPERATION_FAILED
;
532 case LPC2000_CMD_SUCCESS
:
533 bank
->sectors
[i
].is_erased
= 1;
535 case LPC2000_SECTOR_NOT_BLANK
:
536 bank
->sectors
[i
].is_erased
= 0;
538 case LPC2000_INVALID_SECTOR
:
539 bank
->sectors
[i
].is_erased
= 0;
542 retval
= ERROR_FLASH_BUSY
;
545 LOG_ERROR("BUG: unknown LPC2000 status code %i", status_code
);
550 struct target
*target
= bank
->target
;
551 target_free_working_area(target
, iap_working_area
);
557 * flash bank lpc2000 <base> <size> 0 0 <target#> <lpc_variant> <cclk> [calc_checksum]
559 FLASH_BANK_COMMAND_HANDLER(lpc2000_flash_bank_command
)
562 return ERROR_COMMAND_SYNTAX_ERROR
;
564 struct lpc2000_flash_bank
*lpc2000_info
= calloc(1, sizeof(*lpc2000_info
));
566 bank
->driver_priv
= lpc2000_info
;
568 if (strcmp(CMD_ARGV
[6], "lpc2000_v1") == 0) {
569 lpc2000_info
->variant
= lpc2000_v1
;
570 lpc2000_info
->cmd51_dst_boundary
= 512;
571 lpc2000_info
->cmd51_can_256b
= 0;
572 lpc2000_info
->cmd51_can_8192b
= 1;
573 lpc2000_info
->checksum_vector
= 5;
574 lpc2000_info
->iap_max_stack
= 128;
575 } else if (strcmp(CMD_ARGV
[6], "lpc2000_v2") == 0) {
576 lpc2000_info
->variant
= lpc2000_v2
;
577 lpc2000_info
->cmd51_dst_boundary
= 256;
578 lpc2000_info
->cmd51_can_256b
= 1;
579 lpc2000_info
->cmd51_can_8192b
= 0;
580 lpc2000_info
->checksum_vector
= 5;
581 lpc2000_info
->iap_max_stack
= 128;
582 } else if (strcmp(CMD_ARGV
[6], "lpc1700") == 0) {
583 lpc2000_info
->variant
= lpc1700
;
584 lpc2000_info
->cmd51_dst_boundary
= 256;
585 lpc2000_info
->cmd51_can_256b
= 1;
586 lpc2000_info
->cmd51_can_8192b
= 0;
587 lpc2000_info
->checksum_vector
= 7;
588 lpc2000_info
->iap_max_stack
= 128;
589 } else if (strcmp(CMD_ARGV
[6], "lpc1800") == 0 || strcmp(CMD_ARGV
[6], "lpc4300") == 0) {
590 lpc2000_info
->variant
= lpc4300
;
591 lpc2000_info
->cmd51_dst_boundary
= 512;
592 lpc2000_info
->cmd51_can_256b
= 0;
593 lpc2000_info
->cmd51_can_8192b
= 0;
594 lpc2000_info
->checksum_vector
= 7;
595 lpc2000_info
->iap_max_stack
= 208;
596 } else if (strcmp(CMD_ARGV
[6], "lpc800") == 0) {
597 lpc2000_info
->variant
= lpc800
;
598 lpc2000_info
->cmd51_dst_boundary
= 64;
599 lpc2000_info
->cmd51_can_64b
= 1;
600 lpc2000_info
->cmd51_can_256b
= 0;
601 lpc2000_info
->cmd51_can_8192b
= 0;
602 lpc2000_info
->checksum_vector
= 7;
603 lpc2000_info
->iap_max_stack
= 148;
605 LOG_ERROR("unknown LPC2000 variant: %s", CMD_ARGV
[6]);
607 return ERROR_FLASH_BANK_INVALID
;
610 /* see lpc2000_iap_working_area_init() for the reason behind the 0x34 value */
611 lpc2000_info
->cmd51_src_offset
= 0x34 + lpc2000_info
->iap_max_stack
;
613 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[7], lpc2000_info
->cclk
);
614 lpc2000_info
->calc_checksum
= 0;
615 lpc2000_build_sector_list(bank
);
617 uint32_t temp_base
= 0;
618 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[1], temp_base
);
619 if (temp_base
>= 0x1B000000)
620 lpc2000_info
->lpc4300_bank
= 1; /* bank B */
622 lpc2000_info
->lpc4300_bank
= 0; /* bank A */
625 if (strcmp(CMD_ARGV
[8], "calc_checksum") == 0)
626 lpc2000_info
->calc_checksum
= 1;
632 static int lpc2000_erase(struct flash_bank
*bank
, int first
, int last
)
634 if (bank
->target
->state
!= TARGET_HALTED
) {
635 LOG_ERROR("Target not halted");
636 return ERROR_TARGET_NOT_HALTED
;
639 struct lpc2000_flash_bank
*lpc2000_info
= bank
->driver_priv
;
640 uint32_t param_table
[5] = {0};
642 param_table
[0] = first
;
643 param_table
[1] = last
;
645 if (lpc2000_info
->variant
== lpc4300
)
646 param_table
[2] = lpc2000_info
->lpc4300_bank
;
648 param_table
[2] = lpc2000_info
->cclk
;
650 uint32_t result_table
[4];
651 struct working_area
*iap_working_area
;
653 int retval
= lpc2000_iap_working_area_init(bank
, &iap_working_area
);
655 if (retval
!= ERROR_OK
)
658 if (lpc2000_info
->variant
== lpc4300
)
659 /* Init IAP Anyway */
660 lpc2000_iap_call(bank
, iap_working_area
, 49, param_table
, result_table
);
662 /* Prepare sectors */
663 int status_code
= lpc2000_iap_call(bank
, iap_working_area
, 50, param_table
, result_table
);
664 switch (status_code
) {
665 case ERROR_FLASH_OPERATION_FAILED
:
666 retval
= ERROR_FLASH_OPERATION_FAILED
;
668 case LPC2000_CMD_SUCCESS
:
670 case LPC2000_INVALID_SECTOR
:
671 retval
= ERROR_FLASH_SECTOR_INVALID
;
674 LOG_WARNING("lpc2000 prepare sectors returned %i", status_code
);
675 retval
= ERROR_FLASH_OPERATION_FAILED
;
679 if (retval
== ERROR_OK
) {
681 param_table
[2] = lpc2000_info
->cclk
;
682 if (lpc2000_info
->variant
== lpc4300
)
683 param_table
[3] = lpc2000_info
->lpc4300_bank
;
685 status_code
= lpc2000_iap_call(bank
, iap_working_area
, 52, param_table
, result_table
);
686 switch (status_code
) {
687 case ERROR_FLASH_OPERATION_FAILED
:
688 retval
= ERROR_FLASH_OPERATION_FAILED
;
690 case LPC2000_CMD_SUCCESS
:
692 case LPC2000_INVALID_SECTOR
:
693 retval
= ERROR_FLASH_SECTOR_INVALID
;
696 LOG_WARNING("lpc2000 erase sectors returned %i", status_code
);
697 retval
= ERROR_FLASH_OPERATION_FAILED
;
702 struct target
*target
= bank
->target
;
703 target_free_working_area(target
, iap_working_area
);
708 static int lpc2000_protect(struct flash_bank
*bank
, int set
, int first
, int last
)
710 /* can't protect/unprotect on the lpc2000 */
714 static int lpc2000_write(struct flash_bank
*bank
, uint8_t *buffer
, uint32_t offset
, uint32_t count
)
716 struct target
*target
= bank
->target
;
718 if (bank
->target
->state
!= TARGET_HALTED
) {
719 LOG_ERROR("Target not halted");
720 return ERROR_TARGET_NOT_HALTED
;
723 if (offset
+ count
> bank
->size
)
724 return ERROR_FLASH_DST_OUT_OF_BANK
;
726 struct lpc2000_flash_bank
*lpc2000_info
= bank
->driver_priv
;
728 uint32_t dst_min_alignment
= lpc2000_info
->cmd51_dst_boundary
;
730 if (offset
% dst_min_alignment
) {
731 LOG_WARNING("offset 0x%" PRIx32
" breaks required alignment 0x%" PRIx32
, offset
, dst_min_alignment
);
732 return ERROR_FLASH_DST_BREAKS_ALIGNMENT
;
735 int first_sector
= 0;
738 for (int i
= 0; i
< bank
->num_sectors
; i
++) {
739 if (offset
>= bank
->sectors
[i
].offset
)
741 if (offset
+ DIV_ROUND_UP(count
, dst_min_alignment
) * dst_min_alignment
> bank
->sectors
[i
].offset
)
745 LOG_DEBUG("first_sector: %i, last_sector: %i", first_sector
, last_sector
);
747 /* check if exception vectors should be flashed */
748 if ((offset
== 0) && (count
>= 0x20) && lpc2000_info
->calc_checksum
) {
749 uint32_t checksum
= 0;
750 for (int i
= 0; i
< 8; i
++) {
751 LOG_DEBUG("Vector 0x%2.2x: 0x%8.8" PRIx32
, i
* 4, buf_get_u32(buffer
+ (i
* 4), 0, 32));
752 if (i
!= lpc2000_info
->checksum_vector
)
753 checksum
+= buf_get_u32(buffer
+ (i
* 4), 0, 32);
755 checksum
= 0 - checksum
;
756 LOG_DEBUG("checksum: 0x%8.8" PRIx32
, checksum
);
758 uint32_t original_value
= buf_get_u32(buffer
+ (lpc2000_info
->checksum_vector
* 4), 0, 32);
759 if (original_value
!= checksum
) {
760 LOG_WARNING("Verification will fail since checksum in image (0x%8.8" PRIx32
") to be written to flash is "
761 "different from calculated vector checksum (0x%8.8" PRIx32
").", original_value
, checksum
);
762 LOG_WARNING("To remove this warning modify build tools on developer PC to inject correct LPC vector "
766 buf_set_u32(buffer
+ (lpc2000_info
->checksum_vector
* 4), 0, 32, checksum
);
769 struct working_area
*iap_working_area
;
771 int retval
= lpc2000_iap_working_area_init(bank
, &iap_working_area
);
773 if (retval
!= ERROR_OK
)
776 struct working_area
*download_area
;
778 /* allocate a working area */
779 if (target_alloc_working_area(target
, lpc2000_info
->cmd51_max_buffer
, &download_area
) != ERROR_OK
) {
780 LOG_ERROR("no working area specified, can't write LPC2000 internal flash");
781 target_free_working_area(target
, iap_working_area
);
782 return ERROR_FLASH_OPERATION_FAILED
;
785 uint32_t bytes_remaining
= count
;
786 uint32_t bytes_written
= 0;
787 uint32_t param_table
[5] = {0};
788 uint32_t result_table
[4];
790 if (lpc2000_info
->variant
== lpc4300
)
791 /* Init IAP Anyway */
792 lpc2000_iap_call(bank
, iap_working_area
, 49, param_table
, result_table
);
794 while (bytes_remaining
> 0) {
795 uint32_t thisrun_bytes
;
796 if (bytes_remaining
>= lpc2000_info
->cmd51_max_buffer
)
797 thisrun_bytes
= lpc2000_info
->cmd51_max_buffer
;
798 else if (bytes_remaining
>= 1024)
799 thisrun_bytes
= 1024;
800 else if ((bytes_remaining
>= 512) || (!lpc2000_info
->cmd51_can_256b
))
802 else if ((bytes_remaining
>= 256) || (!lpc2000_info
->cmd51_can_64b
))
807 /* Prepare sectors */
808 param_table
[0] = first_sector
;
809 param_table
[1] = last_sector
;
811 if (lpc2000_info
->variant
== lpc4300
)
812 param_table
[2] = lpc2000_info
->lpc4300_bank
;
814 param_table
[2] = lpc2000_info
->cclk
;
816 int status_code
= lpc2000_iap_call(bank
, iap_working_area
, 50, param_table
, result_table
);
817 switch (status_code
) {
818 case ERROR_FLASH_OPERATION_FAILED
:
819 retval
= ERROR_FLASH_OPERATION_FAILED
;
821 case LPC2000_CMD_SUCCESS
:
823 case LPC2000_INVALID_SECTOR
:
824 retval
= ERROR_FLASH_SECTOR_INVALID
;
827 LOG_WARNING("lpc2000 prepare sectors returned %i", status_code
);
828 retval
= ERROR_FLASH_OPERATION_FAILED
;
832 /* Exit if error occured */
833 if (retval
!= ERROR_OK
)
836 if (bytes_remaining
>= thisrun_bytes
) {
837 retval
= target_write_buffer(bank
->target
, download_area
->address
, thisrun_bytes
, buffer
+ bytes_written
);
838 if (retval
!= ERROR_OK
) {
839 retval
= ERROR_FLASH_OPERATION_FAILED
;
843 uint8_t *last_buffer
= malloc(thisrun_bytes
);
844 memcpy(last_buffer
, buffer
+ bytes_written
, bytes_remaining
);
845 memset(last_buffer
+ bytes_remaining
, 0xff, thisrun_bytes
- bytes_remaining
);
846 target_write_buffer(bank
->target
, download_area
->address
, thisrun_bytes
, last_buffer
);
850 LOG_DEBUG("writing 0x%" PRIx32
" bytes to address 0x%" PRIx32
, thisrun_bytes
,
851 bank
->base
+ offset
+ bytes_written
);
854 param_table
[0] = bank
->base
+ offset
+ bytes_written
;
855 param_table
[1] = download_area
->address
;
856 param_table
[2] = thisrun_bytes
;
857 param_table
[3] = lpc2000_info
->cclk
;
858 status_code
= lpc2000_iap_call(bank
, iap_working_area
, 51, param_table
, result_table
);
859 switch (status_code
) {
860 case ERROR_FLASH_OPERATION_FAILED
:
861 retval
= ERROR_FLASH_OPERATION_FAILED
;
863 case LPC2000_CMD_SUCCESS
:
865 case LPC2000_INVALID_SECTOR
:
866 retval
= ERROR_FLASH_SECTOR_INVALID
;
869 LOG_WARNING("lpc2000 returned %i", status_code
);
870 retval
= ERROR_FLASH_OPERATION_FAILED
;
874 /* Exit if error occured */
875 if (retval
!= ERROR_OK
)
878 if (bytes_remaining
> thisrun_bytes
)
879 bytes_remaining
-= thisrun_bytes
;
882 bytes_written
+= thisrun_bytes
;
885 target_free_working_area(target
, iap_working_area
);
886 target_free_working_area(target
, download_area
);
891 static int lpc2000_probe(struct flash_bank
*bank
)
893 /* we can't probe on an lpc2000 if this is an lpc2xxx, it has the configured flash */
897 static int lpc2000_erase_check(struct flash_bank
*bank
)
899 if (bank
->target
->state
!= TARGET_HALTED
) {
900 LOG_ERROR("Target not halted");
901 return ERROR_TARGET_NOT_HALTED
;
904 return lpc2000_iap_blank_check(bank
, 0, bank
->num_sectors
- 1);
907 static int lpc2000_protect_check(struct flash_bank
*bank
)
909 /* sectors are always protected */
913 static int get_lpc2000_info(struct flash_bank
*bank
, char *buf
, int buf_size
)
915 struct lpc2000_flash_bank
*lpc2000_info
= bank
->driver_priv
;
917 snprintf(buf
, buf_size
, "lpc2000 flash driver variant: %i, clk: %" PRIi32
"kHz", lpc2000_info
->variant
,
923 COMMAND_HANDLER(lpc2000_handle_part_id_command
)
926 return ERROR_COMMAND_SYNTAX_ERROR
;
928 struct flash_bank
*bank
;
929 int retval
= CALL_COMMAND_HANDLER(flash_command_get_bank
, 0, &bank
);
930 if (ERROR_OK
!= retval
)
933 if (bank
->target
->state
!= TARGET_HALTED
) {
934 LOG_ERROR("Target not halted");
935 return ERROR_TARGET_NOT_HALTED
;
938 uint32_t param_table
[5] = {0};
939 uint32_t result_table
[4];
940 struct working_area
*iap_working_area
;
942 retval
= lpc2000_iap_working_area_init(bank
, &iap_working_area
);
944 if (retval
!= ERROR_OK
)
947 int status_code
= lpc2000_iap_call(bank
, iap_working_area
, 54, param_table
, result_table
);
948 if (status_code
!= 0x0) {
949 if (status_code
== ERROR_FLASH_OPERATION_FAILED
) {
950 command_print(CMD_CTX
, "no sufficient working area specified, can't access LPC2000 IAP interface");
952 command_print(CMD_CTX
, "lpc2000 IAP returned status code %i", status_code
);
954 command_print(CMD_CTX
, "lpc2000 part id: 0x%8.8" PRIx32
, result_table
[0]);
959 static const struct command_registration lpc2000_exec_command_handlers
[] = {
962 .handler
= lpc2000_handle_part_id_command
,
963 .mode
= COMMAND_EXEC
,
964 .help
= "print part id of lpc2000 flash bank <num>",
967 COMMAND_REGISTRATION_DONE
969 static const struct command_registration lpc2000_command_handlers
[] = {
973 .help
= "lpc2000 flash command group",
975 .chain
= lpc2000_exec_command_handlers
,
977 COMMAND_REGISTRATION_DONE
980 struct flash_driver lpc2000_flash
= {
982 .commands
= lpc2000_command_handlers
,
983 .flash_bank_command
= lpc2000_flash_bank_command
,
984 .erase
= lpc2000_erase
,
985 .protect
= lpc2000_protect
,
986 .write
= lpc2000_write
,
987 .read
= default_flash_read
,
988 .probe
= lpc2000_probe
,
989 .auto_probe
= lpc2000_probe
,
990 .erase_check
= lpc2000_erase_check
,
991 .protect_check
= lpc2000_protect_check
,
992 .info
= get_lpc2000_info
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)