2 # Defines basic Tcl procs that must be there for
5 # Embedded into OpenOCD executable
9 # Help text list. A list of command + help text pairs.
11 # Commands can be more than one word and they are stored
12 # as "flash banks" "help text x x x"
14 proc add_help_text
{cmd cmd_help
} {
16 lappend ocd_helptext
[list $cmd $cmd_help]
19 proc get_help_text
{} {
25 # Show flash in human readable form
26 # This is an example of a human readable form of a low level fn
30 foreach {a
} [ocd_flash_banks
] {
32 set result
"$result\n"
34 set result
[format "$result#%d: %s at 0x%08x, size 0x%08x, buswidth %d, chipwidth %d" $i $a(name
) $a(base
) $a(size
) $a(bus_width
) $a(chip_width
)]
40 # We need to explicitly redirect this to the OpenOCD command
41 # as Tcl defines the exit proc
46 #Print help text for a command. Word wrap
47 #help text that is too wide inside column.
51 foreach a
[lsort $ocd_helptext] {
52 if {[string length
$cmd]==0||
[string first
$cmd $a]!=-1||
[string first
$cmd [lindex $a 1]]!=-1} {
54 set cmdname
[lindex $a 0]
58 if {$n > [string length
$h]} {break}
60 set next_a
[expr $n+$w]
61 if {[string length
$h]>$n+$w} {
62 set xxxx
[string range
$h $n [expr $n+$w]]
63 for {set lastpos
[expr [string length
$xxxx]-1]} {$lastpos>=0&&[string compare
[string range
$xxxx $lastpos $lastpos] " "]!=0} {set lastpos
[expr $lastpos-1]} {
67 set next_a
[expr $lastpos+$n+1]
72 puts [format "%-25s %s" $cmdname [string range
$h $n [expr $next_a-1]] ]
80 add_help_text help
"Tcl implementation of help command"
83 # If a fn is unknown to Tcl, we try to execute it as an OpenOCD command
85 # We also support two level commands. "flash banks" is translated to
88 # do the name mangling from "flash banks" to "flash_banks"
89 if {[llength $args]>=2} {
90 set cmd_name
"[lindex $args 0]_[lindex $args 1]"
91 # Fix?? add a check here if this is a command?
92 # we'll strip away args until we fail anyway...
93 return [eval "$cmd_name [lrange $args 2 end]"]
95 # This really is an unknown command.
96 return -code error "Unknown command: $args"
99 proc new_target_name
{ } {
100 return [target number
[expr [target count
] - 1 ]]
103 # Try flipping / and \ to find file if the filename does not
104 # match the precise spelling
105 proc find
{filename} {
106 if {[catch {ocd_find
$filename} t
]==0} {
109 if {[catch {ocd_find
[string map
{\ /} $filename} t
]==0} {
112 if {[catch {ocd_find
[string map
{/ \\} $filename} t
]==0} {
115 # make sure error message matches original input string
116 return -code error "Can't find $filename"
118 add_help_text find
"<file> - print full path to file according to OpenOCD search rules"
121 proc script
{filename} {
122 source [find
$filename]
125 #proc daemon_reset {} {
126 # puts "Daemon reset is obsolete. Use -c init -c \"reset halt\" at end of openocd command line instead");
129 add_help_text script
"<filename> - filename of OpenOCD script (tcl) to run"
131 # Handle GDB 'R' packet. Can be overriden by configuration script,
132 # but it's not something one would expect target scripts to do
134 proc ocd_gdb_restart
{target_num
} {
135 # Fix!!! we're resetting all targets here! Really we should reset only
140 # If RCLK is not supported, use fallback_speed_khz
141 proc jtag_rclk
{fallback_speed_khz
} {
142 if {[catch {jtag_khz
0}]!=0} {
143 jtag_khz
$fallback_speed_khz
147 add_help_text jtag_rclk
"fallback_speed_khz - set JTAG speed to RCLK or use fallback speed"
149 proc ocd_process_reset
{ MODE
} {
151 # If this target must be halted...
153 if { 0 == [string compare
$MODE halt
] } {
156 if { 0 == [string compare
$MODE init
] } {
159 if { 0 == [string compare
$MODE run
] } {
163 return -error "Invalid mode: $MODE, must be one of: halt, init, or run";
166 foreach t
[ target names
] {
168 $t invoke-event reset-start
171 # Init the tap controller.
174 # Examine all targets.
175 foreach t
[ target names
] {
179 # Let the C code know we are asserting reset.
180 foreach t
[ target names
] {
181 $t invoke-event reset-assert-pre
182 # C code needs to know if we expect to 'halt'
183 $t arp_reset assert
$halt
184 $t invoke-event reset-assert-post
187 # Now de-assert reset.
188 foreach t
[ target names
] {
189 $t invoke-event reset-deassert-pre
190 # Again, de-assert code needs to know..
191 $t arp_reset deassert
$halt
192 $t invoke-event reset-deassert-post
195 # Pass 1 - Now try to halt.
197 foreach t
[target names
] {
199 # Wait upto 1 second for target to halt. Why 1sec? Cause
200 # the JTAG tap reset signal might be hooked to a slow
201 # resistor/capacitor circuit - and it might take a while
204 # Catch, but ignore any errors.
205 catch { $t arp_waitstate halted
1000 }
210 if { 0 != [string compare
$s "halted" ] } {
211 return -error [format "TARGET: %s - Not halted" $t]
216 #Pass 2 - if needed "init"
217 if { 0 == [string compare init
$MODE] } {
218 foreach t
[target names
] {
219 set err
[catch "$t arp_waitstate halted 5000"]
222 $t invoke-event reset-init
227 foreach t
[ target names
] {
228 $t invoke-event reset-end
232 # stubs for targets scripts that do not have production procedure
233 proc production_info
{} {
234 return "Imagine an explanation here..."
236 add_help_text production_info
"Displays information on production procedure for target script. Implement this procedure in target script."
238 proc production
{firmwarefile serialnumber
} {
239 puts "Imagine production procedure running successfully. Programmed $firmwarefile with serial number $serialnumber"
242 add_help_text production
"<serialnumber> - Runs production procedure. Throws exception if procedure failed. Prints progress messages. Implement this procedure in the target script."
244 proc production_test
{} {
245 puts "Imagine nifty test procedure having run to completion here."
247 add_help_text production
"Runs test procedure. Throws exception if procedure failed. Prints progress messages. Implement in target script."
249 add_help_text cpu
"<name> - prints out target options and a comment on CPU which matches name"
251 # A list of names of CPU and options required
255 options {xscale
-variant IXP42x
}
260 options {arm7tdmi
-variant arm7tdmi
}
261 comment
{vanilla ARM7
}
265 # Invoked from Tcl code
266 proc ocd_cpu
{args
} {
270 foreach a
[lsort $ocd_cpu_list] {
271 if {[string length
$args]==0||
[string first
[string toupper
$name] [string toupper
"$a(name)$a(options)$a(comment)"]]!=-1} {
279 # 0123456789012345678901234567890123456789012345678901234567890123456789
280 puts "CPU Options Comment"
281 foreach a
[lsort [ocd_cpu
$args]] {
282 puts [format "%-20s%-40s%s" $a(name
) $a(options) $a(comment
)]
286 proc power_restore
{} {
287 puts "Sensed power restore."
291 add_help_text power_restore
"Overridable procedure run when power restore is detected. Runs 'reset init' by default."
293 proc power_dropout
{} {
294 puts "Sensed power dropout."
297 proc srst_deasserted
{} {
298 puts "Sensed nSRST deasserted."
301 add_help_text srst_deasserted
"Overridable procedure run when srst deassert is detected. Runs 'reset init' by default."
303 proc srst_asserted
{} {
304 puts "Sensed nSRST asserted."
307 # catch any exceptions, capture output and return output
308 proc capture_catch
{a
} {
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)