3 /***************************************************************************
4 * Copyright (C) 2009 by Dimitar Dimitrov <dinuxbg@gmail.com> *
5 * based on Dominic Rath's and Benedikt Sauter's usbprog.c *
7 * This program is free software; you can redistribute it and/or modify *
8 * it under the terms of the GNU General Public License as published by *
9 * the Free Software Foundation; either version 2 of the License, or *
10 * (at your option) any later version. *
12 * This program is distributed in the hope that it will be useful, *
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
15 * GNU General Public License for more details. *
17 * You should have received a copy of the GNU General Public License *
18 * along with this program; if not, write to the *
19 * Free Software Foundation, Inc., *
20 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
21 ***************************************************************************/
31 #define USB_VID 0x15ba
32 #define USB_PID 0x001e
34 #define ARMJTAGEW_EPT_BULK_OUT 0x01u
35 #define ARMJTAGEW_EPT_BULK_IN 0x82u
37 #define ARMJTAGEW_USB_TIMEOUT 2000
39 #define ARMJTAGEW_IN_BUFFER_SIZE (4*1024)
40 #define ARMJTAGEW_OUT_BUFFER_SIZE (4*1024)
43 /* USB command request codes. */
44 #define CMD_GET_VERSION 0x00
45 #define CMD_SELECT_DPIMPL 0x10
46 #define CMD_SET_TCK_FREQUENCY 0x11
47 #define CMD_GET_TCK_FREQUENCY 0x12
48 #define CMD_MEASURE_MAX_TCK_FREQ 0x15
49 #define CMD_MEASURE_RTCK_RESPONSE 0x16
50 #define CMD_TAP_SHIFT 0x17
51 #define CMD_SET_TAPHW_STATE 0x20
52 #define CMD_GET_TAPHW_STATE 0x21
53 #define CMD_TGPWR_SETUP 0x22
55 /* Global USB buffers */
56 static u8 usb_in_buffer
[ARMJTAGEW_IN_BUFFER_SIZE
];
57 static u8 usb_out_buffer
[ARMJTAGEW_OUT_BUFFER_SIZE
];
59 /* External interface functions */
60 static int armjtagew_execute_queue(void);
61 static int armjtagew_speed(int speed
);
62 static int armjtagew_khz(int khz
, int *jtag_speed
);
63 static int armjtagew_register_commands(struct command_context_s
*cmd_ctx
);
64 static int armjtagew_init(void);
65 static int armjtagew_quit(void);
67 /* CLI command handler functions */
68 static int armjtagew_handle_armjtagew_info_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
);
70 /* Queue command functions */
71 static void armjtagew_end_state(tap_state_t state
);
72 static void armjtagew_state_move(void);
73 static void armjtagew_path_move(int num_states
, tap_state_t
*path
);
74 static void armjtagew_runtest(int num_cycles
);
75 static void armjtagew_scan(int ir_scan
, enum scan_type type
, u8
*buffer
, int scan_size
, scan_command_t
*command
);
76 static void armjtagew_reset(int trst
, int srst
);
77 //static void armjtagew_simple_command(u8 command);
78 static int armjtagew_get_status(void);
80 /* tap buffer functions */
81 static void armjtagew_tap_init(void);
82 static int armjtagew_tap_execute(void);
83 static void armjtagew_tap_ensure_space(int scans
, int bits
);
84 static void armjtagew_tap_append_step(int tms
, int tdi
);
85 static void armjtagew_tap_append_scan(int length
, u8
*buffer
, scan_command_t
*command
);
87 /* ARM-JTAG-EW lowlevel functions */
88 typedef struct armjtagew_jtag
90 struct usb_dev_handle
* usb_handle
;
93 static armjtagew_jtag_t
*armjtagew_usb_open(void);
94 static void armjtagew_usb_close(armjtagew_jtag_t
*armjtagew_jtag
);
95 static int armjtagew_usb_message(armjtagew_jtag_t
*armjtagew_jtag
, int out_length
, int in_length
);
96 static int armjtagew_usb_write(armjtagew_jtag_t
*armjtagew_jtag
, int out_length
);
97 static int armjtagew_usb_read(armjtagew_jtag_t
*armjtagew_jtag
, int exp_in_length
);
99 /* helper functions */
100 static int armjtagew_get_version_info(void);
102 #ifdef _DEBUG_USB_COMMS_
103 static void armjtagew_debug_buffer(u8
*buffer
, int length
);
106 static armjtagew_jtag_t
* armjtagew_jtag_handle
;
110 /***************************************************************************/
111 /* External interface implementation */
113 jtag_interface_t armjtagew_interface
=
115 .name
= "arm-jtag-ew",
116 .execute_queue
= armjtagew_execute_queue
,
117 .speed
= armjtagew_speed
,
118 .khz
= armjtagew_khz
,
119 .register_commands
= armjtagew_register_commands
,
120 .init
= armjtagew_init
,
121 .quit
= armjtagew_quit
125 static int armjtagew_execute_queue(void)
127 jtag_command_t
*cmd
= jtag_command_queue
;
137 DEBUG_JTAG_IO("end_state: %i", cmd
->cmd
.end_state
->end_state
);
139 if (cmd
->cmd
.end_state
->end_state
!= TAP_INVALID
)
141 armjtagew_end_state(cmd
->cmd
.end_state
->end_state
);
146 DEBUG_JTAG_IO( "runtest %i cycles, end in %i", cmd
->cmd
.runtest
->num_cycles
, \
147 cmd
->cmd
.runtest
->end_state
);
149 if (cmd
->cmd
.runtest
->end_state
!= TAP_INVALID
)
151 armjtagew_end_state(cmd
->cmd
.runtest
->end_state
);
153 armjtagew_runtest(cmd
->cmd
.runtest
->num_cycles
);
157 DEBUG_JTAG_IO("statemove end in %i", cmd
->cmd
.statemove
->end_state
);
159 if (cmd
->cmd
.statemove
->end_state
!= TAP_INVALID
)
161 armjtagew_end_state(cmd
->cmd
.statemove
->end_state
);
163 armjtagew_state_move();
167 DEBUG_JTAG_IO("pathmove: %i states, end in %i", \
168 cmd
->cmd
.pathmove
->num_states
, \
169 cmd
->cmd
.pathmove
->path
[cmd
->cmd
.pathmove
->num_states
- 1]);
171 armjtagew_path_move(cmd
->cmd
.pathmove
->num_states
, cmd
->cmd
.pathmove
->path
);
175 DEBUG_JTAG_IO("scan end in %i", cmd
->cmd
.scan
->end_state
);
177 if (cmd
->cmd
.scan
->end_state
!= TAP_INVALID
)
179 armjtagew_end_state(cmd
->cmd
.scan
->end_state
);
182 scan_size
= jtag_build_buffer(cmd
->cmd
.scan
, &buffer
);
183 DEBUG_JTAG_IO("scan input, length = %d", scan_size
);
185 #ifdef _DEBUG_USB_COMMS_
186 armjtagew_debug_buffer(buffer
, (scan_size
+ 7) / 8);
188 type
= jtag_scan_type(cmd
->cmd
.scan
);
189 armjtagew_scan(cmd
->cmd
.scan
->ir_scan
, type
, buffer
, scan_size
, cmd
->cmd
.scan
);
193 DEBUG_JTAG_IO("reset trst: %i srst %i", cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
195 armjtagew_tap_execute();
197 if (cmd
->cmd
.reset
->trst
== 1)
199 tap_set_state(TAP_RESET
);
201 armjtagew_reset(cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
205 DEBUG_JTAG_IO("sleep %i", cmd
->cmd
.sleep
->us
);
206 armjtagew_tap_execute();
207 jtag_sleep(cmd
->cmd
.sleep
->us
);
211 LOG_ERROR("BUG: unknown JTAG command type encountered");
217 return armjtagew_tap_execute();
221 /* Sets speed in kHz. */
222 static int armjtagew_speed(int speed
)
228 usb_out_buffer
[0] = CMD_SET_TCK_FREQUENCY
;
229 buf_set_u32(usb_out_buffer
+1, 0, 32, speed
);
231 result
= armjtagew_usb_message(armjtagew_jtag_handle
, 4, 4);
235 LOG_ERROR("ARM-JTAG-EW setting speed failed (%d)", result
);
236 return ERROR_JTAG_DEVICE_ERROR
;
239 usb_out_buffer
[0] = CMD_GET_TCK_FREQUENCY
;
240 result
= armjtagew_usb_message(armjtagew_jtag_handle
, 1, 4);
241 speed_real
= (int)buf_get_u32(usb_in_buffer
,0,32);
244 LOG_ERROR("ARM-JTAG-EW getting speed failed (%d)", result
);
245 return ERROR_JTAG_DEVICE_ERROR
;
249 LOG_INFO("Requested speed %dkHz, emulator reported %dkHz.", speed
, speed_real
);
256 static int armjtagew_khz(int khz
, int *jtag_speed
)
263 static int armjtagew_register_commands(struct command_context_s
*cmd_ctx
)
265 register_command(cmd_ctx
, NULL
, "armjtagew_info", armjtagew_handle_armjtagew_info_command
, COMMAND_EXEC
,
266 "query armjtagew info");
270 static int armjtagew_init(void)
274 armjtagew_jtag_handle
= armjtagew_usb_open();
276 if (armjtagew_jtag_handle
== 0)
278 LOG_ERROR("Cannot find ARM-JTAG-EW Interface! Please check connection and permissions.");
279 return ERROR_JTAG_INIT_FAILED
;
283 while (check_cnt
< 3)
285 if (armjtagew_get_version_info() == ERROR_OK
)
287 /* attempt to get status */
288 armjtagew_get_status();
297 LOG_INFO("ARM-JTAG-EW initial read failed, don't worry");
300 LOG_INFO("ARM-JTAG-EW JTAG Interface ready");
302 armjtagew_reset(0, 0);
303 armjtagew_tap_init();
308 static int armjtagew_quit(void)
310 armjtagew_usb_close(armjtagew_jtag_handle
);
314 /***************************************************************************/
315 /* Queue command implementations */
317 static void armjtagew_end_state(tap_state_t state
)
319 if (tap_is_state_stable(state
))
321 tap_set_end_state(state
);
325 LOG_ERROR("BUG: %i is not a valid end state", state
);
330 /* Goes to the end state. */
331 static void armjtagew_state_move(void)
335 u8 tms_scan
= tap_get_tms_path(tap_get_state(), tap_get_end_state());
337 for (i
= 0; i
< 7; i
++)
339 tms
= (tms_scan
>> i
) & 1;
340 armjtagew_tap_append_step(tms
, 0);
343 tap_set_state(tap_get_end_state());
346 static void armjtagew_path_move(int num_states
, tap_state_t
*path
)
350 for (i
= 0; i
< num_states
; i
++)
353 * TODO: The ARM-JTAG-EW hardware delays TDI with 3 TCK cycles when in RTCK mode.
354 * Either handle that here, or update the documentation with examples
355 * how to fix that in the configuration files.
357 if (path
[i
] == tap_state_transition(tap_get_state(), false))
359 armjtagew_tap_append_step(0, 0);
361 else if (path
[i
] == tap_state_transition(tap_get_state(), true))
363 armjtagew_tap_append_step(1, 0);
367 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_name(tap_get_state()), tap_state_name(path
[i
]));
371 tap_set_state(path
[i
]);
374 tap_set_end_state(tap_get_state());
377 static void armjtagew_runtest(int num_cycles
)
381 tap_state_t saved_end_state
= tap_get_end_state();
383 /* only do a state_move when we're not already in IDLE */
384 if (tap_get_state() != TAP_IDLE
)
386 armjtagew_end_state(TAP_IDLE
);
387 armjtagew_state_move();
390 /* execute num_cycles */
391 for (i
= 0; i
< num_cycles
; i
++)
393 armjtagew_tap_append_step(0, 0);
396 /* finish in end_state */
397 armjtagew_end_state(saved_end_state
);
398 if (tap_get_state() != tap_get_end_state())
400 armjtagew_state_move();
404 static void armjtagew_scan(int ir_scan
, enum scan_type type
, u8
*buffer
, int scan_size
, scan_command_t
*command
)
406 tap_state_t saved_end_state
;
408 armjtagew_tap_ensure_space(1, scan_size
+ 8);
410 saved_end_state
= tap_get_end_state();
412 /* Move to appropriate scan state */
413 armjtagew_end_state(ir_scan
? TAP_IRSHIFT
: TAP_DRSHIFT
);
415 armjtagew_state_move();
416 armjtagew_end_state(saved_end_state
);
419 armjtagew_tap_append_scan(scan_size
, buffer
, command
);
421 /* We are in Exit1, go to Pause */
422 armjtagew_tap_append_step(0, 0);
424 tap_set_state(ir_scan
? TAP_IRPAUSE
: TAP_DRPAUSE
);
426 if (tap_get_state() != tap_get_end_state())
428 armjtagew_state_move();
432 static void armjtagew_reset(int trst
, int srst
)
434 const u8 trst_mask
= (1u<<5);
435 const u8 srst_mask
= (1u<<6);
441 LOG_DEBUG("trst: %i, srst: %i", trst
, srst
);
446 outp_en
&= ~srst_mask
; /* tristate */
447 change_mask
|= srst_mask
;
452 outp_en
|= srst_mask
;
453 change_mask
|= srst_mask
;
459 outp_en
&= ~trst_mask
; /* tristate */
460 change_mask
|= trst_mask
;
465 outp_en
|= trst_mask
;
466 change_mask
|= trst_mask
;
469 usb_out_buffer
[0] = CMD_SET_TAPHW_STATE
;
470 usb_out_buffer
[1] = val
;
471 usb_out_buffer
[2] = outp_en
;
472 usb_out_buffer
[3] = change_mask
;
473 result
= armjtagew_usb_write(armjtagew_jtag_handle
, 4);
476 LOG_ERROR("ARM-JTAG-EW TRST/SRST pin set failed failed (%d)", result
);
481 static int armjtagew_get_status(void)
485 usb_out_buffer
[0] = CMD_GET_TAPHW_STATE
;
486 result
= armjtagew_usb_message(armjtagew_jtag_handle
, 1, 12);
490 unsigned int u_tg
= buf_get_u32(usb_in_buffer
, 0, 16);
491 LOG_INFO("U_tg = %d mV, U_aux = %d mV, U_tgpwr = %d mV, I_tgpwr = %d mA, D1 = %d, Target power %s %s\n", \
492 buf_get_u32(usb_in_buffer
+ 0, 0, 16), \
493 buf_get_u32(usb_in_buffer
+ 2, 0, 16), \
494 buf_get_u32(usb_in_buffer
+ 4, 0, 16), \
495 buf_get_u32(usb_in_buffer
+ 6, 0, 16), \
497 usb_in_buffer
[11] ? "OVERCURRENT" : "OK", \
498 usb_in_buffer
[10] ? "enabled" : "disabled");
502 LOG_ERROR("Vref too low. Check Target Power\n");
507 LOG_ERROR("ARM-JTAG-EW command CMD_GET_TAPHW_STATE failed (%d)\n", result
);
513 static int armjtagew_get_version_info(void)
519 /* query hardware version */
520 usb_out_buffer
[0] = CMD_GET_VERSION
;
521 result
= armjtagew_usb_message(armjtagew_jtag_handle
, 1, 4+15+256);
525 LOG_ERROR("ARM-JTAG-EW command CMD_GET_VERSION failed (%d)\n", result
);
526 return ERROR_JTAG_DEVICE_ERROR
;
530 memcpy(sn
, usb_in_buffer
+4, 15);
532 memcpy(auxinfo
, usb_in_buffer
+4+15, 256);
535 LOG_INFO("ARM-JTAG-EW firmware version %d.%d, hardware revision %c, SN=%s, Additional info: %s", \
536 usb_in_buffer
[1], usb_in_buffer
[0], \
537 isgraph(usb_in_buffer
[2]) ? usb_in_buffer
[2] : 'X', \
542 static int armjtagew_handle_armjtagew_info_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
544 if (armjtagew_get_version_info() == ERROR_OK
)
546 /* attempt to get status */
547 armjtagew_get_status();
553 /***************************************************************************/
554 /* ARM-JTAG-EW tap functions */
556 /* 2048 is the max value we can use here */
557 #define ARMJTAGEW_TAP_BUFFER_SIZE 2048
559 static int tap_length
;
560 static u8 tms_buffer
[ARMJTAGEW_TAP_BUFFER_SIZE
];
561 static u8 tdi_buffer
[ARMJTAGEW_TAP_BUFFER_SIZE
];
562 static u8 tdo_buffer
[ARMJTAGEW_TAP_BUFFER_SIZE
];
566 int first
; /* First bit position in tdo_buffer to read */
567 int length
; /* Number of bits to read */
568 scan_command_t
*command
; /* Corresponding scan command */
570 } pending_scan_result_t
;
572 #define MAX_PENDING_SCAN_RESULTS 256
574 static int pending_scan_results_length
;
575 static pending_scan_result_t pending_scan_results_buffer
[MAX_PENDING_SCAN_RESULTS
];
579 static void armjtagew_tap_init(void)
582 pending_scan_results_length
= 0;
585 static void armjtagew_tap_ensure_space(int scans
, int bits
)
587 int available_scans
= MAX_PENDING_SCAN_RESULTS
- pending_scan_results_length
;
588 int available_bits
= ARMJTAGEW_TAP_BUFFER_SIZE
* 8 - tap_length
;
590 if (scans
> available_scans
|| bits
> available_bits
)
592 armjtagew_tap_execute();
596 static void armjtagew_tap_append_step(int tms
, int tdi
)
599 int index
= tap_length
/ 8;
601 if (index
< ARMJTAGEW_TAP_BUFFER_SIZE
)
603 int bit_index
= tap_length
% 8;
604 u8 bit
= 1 << bit_index
;
608 tms_buffer
[index
] |= bit
;
612 tms_buffer
[index
] &= ~bit
;
617 tdi_buffer
[index
] |= bit
;
621 tdi_buffer
[index
] &= ~bit
;
628 LOG_ERROR("armjtagew_tap_append_step, overflow");
632 void armjtagew_tap_append_scan(int length
, u8
*buffer
, scan_command_t
*command
)
634 pending_scan_result_t
*pending_scan_result
= &pending_scan_results_buffer
[pending_scan_results_length
];
637 pending_scan_result
->first
= tap_length
;
638 pending_scan_result
->length
= length
;
639 pending_scan_result
->command
= command
;
640 pending_scan_result
->buffer
= buffer
;
642 for (i
= 0; i
< length
; i
++)
644 armjtagew_tap_append_step((i
< length
-1 ? 0 : 1), (buffer
[i
/8] >> (i
%8)) & 1);
646 pending_scan_results_length
++;
649 /* Pad and send a tap sequence to the device, and receive the answer.
650 * For the purpose of padding we assume that we are in idle or pause state. */
651 static int armjtagew_tap_execute(void)
661 /* Pad last byte so that tap_length is divisible by 8 */
662 while (tap_length
% 8 != 0)
664 /* More of the last TMS value keeps us in the same state,
665 * analogous to free-running JTAG interfaces. */
666 armjtagew_tap_append_step(last_tms
, 0);
669 byte_length
= tap_length
/ 8;
671 usb_out_buffer
[0] = CMD_TAP_SHIFT
;
672 buf_set_u32(usb_out_buffer
+1, 0, 16, byte_length
);
675 for (i
= 0; i
< byte_length
; i
++)
677 usb_out_buffer
[tms_offset
+ i
] = flip_u32(tms_buffer
[i
],8);
680 tdi_offset
= tms_offset
+ byte_length
;
681 for (i
= 0; i
< byte_length
; i
++)
683 usb_out_buffer
[tdi_offset
+ i
] = flip_u32(tdi_buffer
[i
],8);
686 result
= armjtagew_usb_message(armjtagew_jtag_handle
, 3 + 2 * byte_length
, byte_length
+ 4);
692 stat
= (int)buf_get_u32(usb_in_buffer
+ byte_length
, 0, 32);
694 LOG_ERROR("armjtagew_tap_execute, emulator returned error code %d for a CMD_TAP_SHIFT command", stat
);
695 return ERROR_JTAG_QUEUE_FAILED
;
698 for (i
= 0; i
< byte_length
; i
++)
700 tdo_buffer
[i
] = flip_u32(usb_in_buffer
[i
],8);
703 for (i
= 0; i
< pending_scan_results_length
; i
++)
705 pending_scan_result_t
*pending_scan_result
= &pending_scan_results_buffer
[i
];
706 u8
*buffer
= pending_scan_result
->buffer
;
707 int length
= pending_scan_result
->length
;
708 int first
= pending_scan_result
->first
;
709 scan_command_t
*command
= pending_scan_result
->command
;
712 buf_set_buf(tdo_buffer
, first
, buffer
, 0, length
);
714 DEBUG_JTAG_IO("pending scan result, length = %d", length
);
716 #ifdef _DEBUG_USB_COMMS_
717 armjtagew_debug_buffer(buffer
, byte_length
);
720 if (jtag_read_buffer(buffer
, command
) != ERROR_OK
)
722 armjtagew_tap_init();
723 return ERROR_JTAG_QUEUE_FAILED
;
726 if (pending_scan_result
->buffer
!= NULL
)
728 free(pending_scan_result
->buffer
);
734 LOG_ERROR("armjtagew_tap_execute, wrong result %d, expected %d", result
, byte_length
);
735 return ERROR_JTAG_QUEUE_FAILED
;
738 armjtagew_tap_init();
744 /*****************************************************************************/
745 /* JLink USB low-level functions */
747 static armjtagew_jtag_t
* armjtagew_usb_open()
749 struct usb_bus
*busses
;
751 struct usb_device
*dev
;
753 armjtagew_jtag_t
*result
;
755 result
= (armjtagew_jtag_t
*) malloc(sizeof(armjtagew_jtag_t
));
761 busses
= usb_get_busses();
763 /* find armjtagew_jtag device in usb bus */
765 for (bus
= busses
; bus
; bus
= bus
->next
)
767 for (dev
= bus
->devices
; dev
; dev
= dev
->next
)
769 if ((dev
->descriptor
.idVendor
== USB_VID
) && (dev
->descriptor
.idProduct
== USB_PID
))
771 result
->usb_handle
= usb_open(dev
);
774 /* usb_set_configuration required under win32 */
775 usb_set_configuration(result
->usb_handle
, dev
->config
[0].bConfigurationValue
);
777 usb_claim_interface(result
->usb_handle
, 0);
781 * This makes problems under Mac OS X. And is not needed
782 * under Windows. Hopefully this will not break a linux build
784 usb_set_altinterface(result
->usb_handle
, 0);
795 static void armjtagew_usb_close(armjtagew_jtag_t
*armjtagew_jtag
)
797 usb_close(armjtagew_jtag
->usb_handle
);
798 free(armjtagew_jtag
);
801 /* Send a message and receive the reply. */
802 static int armjtagew_usb_message(armjtagew_jtag_t
*armjtagew_jtag
, int out_length
, int in_length
)
806 result
= armjtagew_usb_write(armjtagew_jtag
, out_length
);
807 if (result
== out_length
)
809 result
= armjtagew_usb_read(armjtagew_jtag
, in_length
);
810 if (result
!= in_length
)
812 LOG_ERROR("usb_bulk_read failed (requested=%d, result=%d)", in_length
, result
);
818 LOG_ERROR("usb_bulk_write failed (requested=%d, result=%d)", out_length
, result
);
824 /* Write data from out_buffer to USB. */
825 static int armjtagew_usb_write(armjtagew_jtag_t
*armjtagew_jtag
, int out_length
)
829 if (out_length
> ARMJTAGEW_OUT_BUFFER_SIZE
)
831 LOG_ERROR("armjtagew_jtag_write illegal out_length=%d (max=%d)", out_length
, ARMJTAGEW_OUT_BUFFER_SIZE
);
835 result
= usb_bulk_write(armjtagew_jtag
->usb_handle
, ARMJTAGEW_EPT_BULK_OUT
, \
836 (char*)usb_out_buffer
, out_length
, ARMJTAGEW_USB_TIMEOUT
);
838 DEBUG_JTAG_IO("armjtagew_usb_write, out_length = %d, result = %d", out_length
, result
);
840 #ifdef _DEBUG_USB_COMMS_
841 armjtagew_debug_buffer(usb_out_buffer
, out_length
);
846 /* Read data from USB into in_buffer. */
847 static int armjtagew_usb_read(armjtagew_jtag_t
*armjtagew_jtag
, int exp_in_length
)
849 int result
= usb_bulk_read(armjtagew_jtag
->usb_handle
, ARMJTAGEW_EPT_BULK_IN
, \
850 (char*)usb_in_buffer
, exp_in_length
, ARMJTAGEW_USB_TIMEOUT
);
852 DEBUG_JTAG_IO("armjtagew_usb_read, result = %d", result
);
854 #ifdef _DEBUG_USB_COMMS_
855 armjtagew_debug_buffer(usb_in_buffer
, result
);
861 #ifdef _DEBUG_USB_COMMS_
862 #define BYTES_PER_LINE 16
864 static void armjtagew_debug_buffer(u8
*buffer
, int length
)
871 for (i
= 0; i
< length
; i
+= BYTES_PER_LINE
)
873 snprintf(line
, 5, "%04x", i
);
874 for (j
= i
; j
< i
+ BYTES_PER_LINE
&& j
< length
; j
++)
876 snprintf(s
, 4, " %02x", buffer
[j
]);
879 LOG_DEBUG("%s", line
);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)