1 /***************************************************************************
2 * Copyright (C) 2009 by Dimitar Dimitrov <dinuxbg@gmail.com> *
3 * based on Dominic Rath's and Benedikt Sauter's usbprog.c *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
19 ***************************************************************************/
25 #include <jtag/interface.h>
26 #include <jtag/commands.h>
28 #include "usb_common.h"
31 #define USB_VID 0x15ba
32 #define USB_PID 0x001e
34 #define ARMJTAGEW_EPT_BULK_OUT 0x01u
35 #define ARMJTAGEW_EPT_BULK_IN 0x82u
37 #define ARMJTAGEW_USB_TIMEOUT 2000
39 #define ARMJTAGEW_IN_BUFFER_SIZE (4*1024)
40 #define ARMJTAGEW_OUT_BUFFER_SIZE (4*1024)
43 /* USB command request codes. */
44 #define CMD_GET_VERSION 0x00
45 #define CMD_SELECT_DPIMPL 0x10
46 #define CMD_SET_TCK_FREQUENCY 0x11
47 #define CMD_GET_TCK_FREQUENCY 0x12
48 #define CMD_MEASURE_MAX_TCK_FREQ 0x15
49 #define CMD_MEASURE_RTCK_RESPONSE 0x16
50 #define CMD_TAP_SHIFT 0x17
51 #define CMD_SET_TAPHW_STATE 0x20
52 #define CMD_GET_TAPHW_STATE 0x21
53 #define CMD_TGPWR_SETUP 0x22
55 /* Global USB buffers */
56 static uint8_t usb_in_buffer
[ARMJTAGEW_IN_BUFFER_SIZE
];
57 static uint8_t usb_out_buffer
[ARMJTAGEW_OUT_BUFFER_SIZE
];
59 /* Queue command functions */
60 static void armjtagew_end_state(tap_state_t state
);
61 static void armjtagew_state_move(void);
62 static void armjtagew_path_move(int num_states
, tap_state_t
*path
);
63 static void armjtagew_runtest(int num_cycles
);
64 static void armjtagew_scan(bool ir_scan
, enum scan_type type
, uint8_t *buffer
, int scan_size
, struct scan_command
*command
);
65 static void armjtagew_reset(int trst
, int srst
);
66 //static void armjtagew_simple_command(uint8_t command);
67 static int armjtagew_get_status(void);
69 /* tap buffer functions */
70 static void armjtagew_tap_init(void);
71 static int armjtagew_tap_execute(void);
72 static void armjtagew_tap_ensure_space(int scans
, int bits
);
73 static void armjtagew_tap_append_step(int tms
, int tdi
);
74 static void armjtagew_tap_append_scan(int length
, uint8_t *buffer
, struct scan_command
*command
);
76 /* ARM-JTAG-EW lowlevel functions */
78 struct usb_dev_handle
* usb_handle
;
81 static struct armjtagew
*armjtagew_usb_open(void);
82 static void armjtagew_usb_close(struct armjtagew
*armjtagew
);
83 static int armjtagew_usb_message(struct armjtagew
*armjtagew
, int out_length
, int in_length
);
84 static int armjtagew_usb_write(struct armjtagew
*armjtagew
, int out_length
);
85 static int armjtagew_usb_read(struct armjtagew
*armjtagew
, int exp_in_length
);
87 /* helper functions */
88 static int armjtagew_get_version_info(void);
90 #ifdef _DEBUG_USB_COMMS_
91 static void armjtagew_debug_buffer(uint8_t *buffer
, int length
);
94 static struct armjtagew
* armjtagew_handle
;
98 /***************************************************************************/
99 /* External interface implementation */
101 static int armjtagew_execute_queue(void)
103 struct jtag_command
*cmd
= jtag_command_queue
;
113 DEBUG_JTAG_IO("runtest %i cycles, end in %i", cmd
->cmd
.runtest
->num_cycles
, \
114 cmd
->cmd
.runtest
->end_state
);
116 armjtagew_end_state(cmd
->cmd
.runtest
->end_state
);
117 armjtagew_runtest(cmd
->cmd
.runtest
->num_cycles
);
121 DEBUG_JTAG_IO("statemove end in %i", cmd
->cmd
.statemove
->end_state
);
123 armjtagew_end_state(cmd
->cmd
.statemove
->end_state
);
124 armjtagew_state_move();
128 DEBUG_JTAG_IO("pathmove: %i states, end in %i", \
129 cmd
->cmd
.pathmove
->num_states
, \
130 cmd
->cmd
.pathmove
->path
[cmd
->cmd
.pathmove
->num_states
- 1]);
132 armjtagew_path_move(cmd
->cmd
.pathmove
->num_states
, cmd
->cmd
.pathmove
->path
);
136 DEBUG_JTAG_IO("scan end in %i", cmd
->cmd
.scan
->end_state
);
138 armjtagew_end_state(cmd
->cmd
.scan
->end_state
);
140 scan_size
= jtag_build_buffer(cmd
->cmd
.scan
, &buffer
);
141 DEBUG_JTAG_IO("scan input, length = %d", scan_size
);
143 #ifdef _DEBUG_USB_COMMS_
144 armjtagew_debug_buffer(buffer
, (scan_size
+ 7) / 8);
146 type
= jtag_scan_type(cmd
->cmd
.scan
);
147 armjtagew_scan(cmd
->cmd
.scan
->ir_scan
, type
, buffer
, scan_size
, cmd
->cmd
.scan
);
151 DEBUG_JTAG_IO("reset trst: %i srst %i", cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
153 armjtagew_tap_execute();
155 if (cmd
->cmd
.reset
->trst
== 1)
157 tap_set_state(TAP_RESET
);
159 armjtagew_reset(cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
163 DEBUG_JTAG_IO("sleep %i", cmd
->cmd
.sleep
->us
);
164 armjtagew_tap_execute();
165 jtag_sleep(cmd
->cmd
.sleep
->us
);
169 LOG_ERROR("BUG: unknown JTAG command type encountered");
175 return armjtagew_tap_execute();
179 /* Sets speed in kHz. */
180 static int armjtagew_speed(int speed
)
186 usb_out_buffer
[0] = CMD_SET_TCK_FREQUENCY
;
187 buf_set_u32(usb_out_buffer
+ 1, 0, 32, speed
*1000);
189 result
= armjtagew_usb_message(armjtagew_handle
, 5, 4);
193 LOG_ERROR("ARM-JTAG-EW setting speed failed (%d)", result
);
194 return ERROR_JTAG_DEVICE_ERROR
;
197 usb_out_buffer
[0] = CMD_GET_TCK_FREQUENCY
;
198 result
= armjtagew_usb_message(armjtagew_handle
, 1, 4);
199 speed_real
= (int)buf_get_u32(usb_in_buffer
,0,32) / 1000;
202 LOG_ERROR("ARM-JTAG-EW getting speed failed (%d)", result
);
203 return ERROR_JTAG_DEVICE_ERROR
;
207 LOG_INFO("Requested speed %dkHz, emulator reported %dkHz.", speed
, speed_real
);
214 static int armjtagew_khz(int khz
, int *jtag_speed
)
221 static int armjtagew_speed_div(int speed
, int* khz
)
229 static int armjtagew_init(void)
233 armjtagew_handle
= armjtagew_usb_open();
235 if (armjtagew_handle
== 0)
237 LOG_ERROR("Cannot find ARM-JTAG-EW Interface! Please check connection and permissions.");
238 return ERROR_JTAG_INIT_FAILED
;
242 while (check_cnt
< 3)
244 if (armjtagew_get_version_info() == ERROR_OK
)
246 /* attempt to get status */
247 armjtagew_get_status();
256 LOG_INFO("ARM-JTAG-EW initial read failed, don't worry");
259 LOG_INFO("ARM-JTAG-EW JTAG Interface ready");
261 armjtagew_reset(0, 0);
262 armjtagew_tap_init();
267 static int armjtagew_quit(void)
269 armjtagew_usb_close(armjtagew_handle
);
273 /***************************************************************************/
274 /* Queue command implementations */
276 static void armjtagew_end_state(tap_state_t state
)
278 if (tap_is_state_stable(state
))
280 tap_set_end_state(state
);
284 LOG_ERROR("BUG: %i is not a valid end state", state
);
289 /* Goes to the end state. */
290 static void armjtagew_state_move(void)
294 uint8_t tms_scan
= tap_get_tms_path(tap_get_state(), tap_get_end_state());
295 int tms_count
= tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
297 for (i
= 0; i
< tms_count
; i
++)
299 tms
= (tms_scan
>> i
) & 1;
300 armjtagew_tap_append_step(tms
, 0);
303 tap_set_state(tap_get_end_state());
306 static void armjtagew_path_move(int num_states
, tap_state_t
*path
)
310 for (i
= 0; i
< num_states
; i
++)
313 * TODO: The ARM-JTAG-EW hardware delays TDI with 3 TCK cycles when in RTCK mode.
314 * Either handle that here, or update the documentation with examples
315 * how to fix that in the configuration files.
317 if (path
[i
] == tap_state_transition(tap_get_state(), false))
319 armjtagew_tap_append_step(0, 0);
321 else if (path
[i
] == tap_state_transition(tap_get_state(), true))
323 armjtagew_tap_append_step(1, 0);
327 LOG_ERROR("BUG: %s -> %s isn't a valid TAP transition", tap_state_name(tap_get_state()), tap_state_name(path
[i
]));
331 tap_set_state(path
[i
]);
334 tap_set_end_state(tap_get_state());
337 static void armjtagew_runtest(int num_cycles
)
341 tap_state_t saved_end_state
= tap_get_end_state();
343 /* only do a state_move when we're not already in IDLE */
344 if (tap_get_state() != TAP_IDLE
)
346 armjtagew_end_state(TAP_IDLE
);
347 armjtagew_state_move();
350 /* execute num_cycles */
351 for (i
= 0; i
< num_cycles
; i
++)
353 armjtagew_tap_append_step(0, 0);
356 /* finish in end_state */
357 armjtagew_end_state(saved_end_state
);
358 if (tap_get_state() != tap_get_end_state())
360 armjtagew_state_move();
364 static void armjtagew_scan(bool ir_scan
, enum scan_type type
, uint8_t *buffer
, int scan_size
, struct scan_command
*command
)
366 tap_state_t saved_end_state
;
368 armjtagew_tap_ensure_space(1, scan_size
+ 8);
370 saved_end_state
= tap_get_end_state();
372 /* Move to appropriate scan state */
373 armjtagew_end_state(ir_scan
? TAP_IRSHIFT
: TAP_DRSHIFT
);
375 armjtagew_state_move();
376 armjtagew_end_state(saved_end_state
);
379 armjtagew_tap_append_scan(scan_size
, buffer
, command
);
381 /* We are in Exit1, go to Pause */
382 armjtagew_tap_append_step(0, 0);
384 tap_set_state(ir_scan
? TAP_IRPAUSE
: TAP_DRPAUSE
);
386 if (tap_get_state() != tap_get_end_state())
388 armjtagew_state_move();
392 static void armjtagew_reset(int trst
, int srst
)
394 const uint8_t trst_mask
= (1u << 5);
395 const uint8_t srst_mask
= (1u << 6);
398 uint8_t change_mask
= 0;
401 LOG_DEBUG("trst: %i, srst: %i", trst
, srst
);
406 outp_en
&= ~srst_mask
; /* tristate */
407 change_mask
|= srst_mask
;
412 outp_en
|= srst_mask
;
413 change_mask
|= srst_mask
;
419 outp_en
&= ~trst_mask
; /* tristate */
420 change_mask
|= trst_mask
;
425 outp_en
|= trst_mask
;
426 change_mask
|= trst_mask
;
429 usb_out_buffer
[0] = CMD_SET_TAPHW_STATE
;
430 usb_out_buffer
[1] = val
;
431 usb_out_buffer
[2] = outp_en
;
432 usb_out_buffer
[3] = change_mask
;
433 result
= armjtagew_usb_write(armjtagew_handle
, 4);
436 LOG_ERROR("ARM-JTAG-EW TRST/SRST pin set failed failed (%d)", result
);
441 static int armjtagew_get_status(void)
445 usb_out_buffer
[0] = CMD_GET_TAPHW_STATE
;
446 result
= armjtagew_usb_message(armjtagew_handle
, 1, 12);
450 unsigned int u_tg
= buf_get_u32(usb_in_buffer
, 0, 16);
451 LOG_INFO("U_tg = %d mV, U_aux = %d mV, U_tgpwr = %d mV, I_tgpwr = %d mA, D1 = %d, Target power %s %s",
452 (int)(buf_get_u32(usb_in_buffer
+ 0, 0, 16)),
453 (int)(buf_get_u32(usb_in_buffer
+ 2, 0, 16)),
454 (int)(buf_get_u32(usb_in_buffer
+ 4, 0, 16)),
455 (int)(buf_get_u32(usb_in_buffer
+ 6, 0, 16)),
457 usb_in_buffer
[11] ? "OVERCURRENT" : "OK",
458 usb_in_buffer
[10] ? "enabled" : "disabled");
462 LOG_ERROR("Vref too low. Check Target Power");
467 LOG_ERROR("ARM-JTAG-EW command CMD_GET_TAPHW_STATE failed (%d)", result
);
473 static int armjtagew_get_version_info(void)
479 /* query hardware version */
480 usb_out_buffer
[0] = CMD_GET_VERSION
;
481 result
= armjtagew_usb_message(armjtagew_handle
, 1, 4 + 15 + 256);
485 LOG_ERROR("ARM-JTAG-EW command CMD_GET_VERSION failed (%d)", result
);
486 return ERROR_JTAG_DEVICE_ERROR
;
490 memcpy(sn
, usb_in_buffer
+ 4, 15);
492 memcpy(auxinfo
, usb_in_buffer
+ 4+15, 256);
495 LOG_INFO("ARM-JTAG-EW firmware version %d.%d, hardware revision %c, SN=%s, Additional info: %s", \
496 usb_in_buffer
[1], usb_in_buffer
[0], \
497 isgraph(usb_in_buffer
[2]) ? usb_in_buffer
[2] : 'X', \
502 COMMAND_HANDLER(armjtagew_handle_armjtagew_info_command
)
504 if (armjtagew_get_version_info() == ERROR_OK
)
506 /* attempt to get status */
507 armjtagew_get_status();
513 static const struct command_registration armjtagew_command_handlers
[] = {
515 .name
= "armjtagew_info",
516 .handler
= &armjtagew_handle_armjtagew_info_command
,
517 .mode
= COMMAND_EXEC
,
518 .help
= "query armjtagew info",
520 COMMAND_REGISTRATION_DONE
523 struct jtag_interface armjtagew_interface
= {
524 .name
= "arm-jtag-ew",
525 .commands
= armjtagew_command_handlers
,
526 .transports
= jtag_only
,
528 .execute_queue
= armjtagew_execute_queue
,
529 .speed
= armjtagew_speed
,
530 .speed_div
= armjtagew_speed_div
,
531 .khz
= armjtagew_khz
,
532 .init
= armjtagew_init
,
533 .quit
= armjtagew_quit
,
536 /***************************************************************************/
537 /* ARM-JTAG-EW tap functions */
539 /* 2048 is the max value we can use here */
540 #define ARMJTAGEW_TAP_BUFFER_SIZE 2048
542 static int tap_length
;
543 static uint8_t tms_buffer
[ARMJTAGEW_TAP_BUFFER_SIZE
];
544 static uint8_t tdi_buffer
[ARMJTAGEW_TAP_BUFFER_SIZE
];
545 static uint8_t tdo_buffer
[ARMJTAGEW_TAP_BUFFER_SIZE
];
547 struct pending_scan_result
{
548 int first
; /* First bit position in tdo_buffer to read */
549 int length
; /* Number of bits to read */
550 struct scan_command
*command
; /* Corresponding scan command */
554 #define MAX_PENDING_SCAN_RESULTS 256
556 static int pending_scan_results_length
;
557 static struct pending_scan_result pending_scan_results_buffer
[MAX_PENDING_SCAN_RESULTS
];
561 static void armjtagew_tap_init(void)
564 pending_scan_results_length
= 0;
567 static void armjtagew_tap_ensure_space(int scans
, int bits
)
569 int available_scans
= MAX_PENDING_SCAN_RESULTS
- pending_scan_results_length
;
570 int available_bits
= ARMJTAGEW_TAP_BUFFER_SIZE
* 8 - tap_length
;
572 if (scans
> available_scans
|| bits
> available_bits
)
574 armjtagew_tap_execute();
578 static void armjtagew_tap_append_step(int tms
, int tdi
)
581 int index_local
= tap_length
/ 8;
583 if (index_local
< ARMJTAGEW_TAP_BUFFER_SIZE
)
585 int bit_index
= tap_length
% 8;
586 uint8_t bit
= 1 << bit_index
;
590 tms_buffer
[index_local
] |= bit
;
594 tms_buffer
[index_local
] &= ~bit
;
599 tdi_buffer
[index_local
] |= bit
;
603 tdi_buffer
[index_local
] &= ~bit
;
610 LOG_ERROR("armjtagew_tap_append_step, overflow");
614 void armjtagew_tap_append_scan(int length
, uint8_t *buffer
, struct scan_command
*command
)
616 struct pending_scan_result
*pending_scan_result
= &pending_scan_results_buffer
[pending_scan_results_length
];
619 pending_scan_result
->first
= tap_length
;
620 pending_scan_result
->length
= length
;
621 pending_scan_result
->command
= command
;
622 pending_scan_result
->buffer
= buffer
;
624 for (i
= 0; i
< length
; i
++)
626 armjtagew_tap_append_step((i
< length
-1 ? 0 : 1), (buffer
[i
/8] >> (i
%8)) & 1);
628 pending_scan_results_length
++;
631 /* Pad and send a tap sequence to the device, and receive the answer.
632 * For the purpose of padding we assume that we are in idle or pause state. */
633 static int armjtagew_tap_execute(void)
643 /* Pad last byte so that tap_length is divisible by 8 */
644 while (tap_length
% 8 != 0)
646 /* More of the last TMS value keeps us in the same state,
647 * analogous to free-running JTAG interfaces. */
648 armjtagew_tap_append_step(last_tms
, 0);
651 byte_length
= tap_length
/ 8;
653 usb_out_buffer
[0] = CMD_TAP_SHIFT
;
654 buf_set_u32(usb_out_buffer
+ 1, 0, 16, byte_length
);
657 for (i
= 0; i
< byte_length
; i
++)
659 usb_out_buffer
[tms_offset
+ i
] = flip_u32(tms_buffer
[i
],8);
662 tdi_offset
= tms_offset
+ byte_length
;
663 for (i
= 0; i
< byte_length
; i
++)
665 usb_out_buffer
[tdi_offset
+ i
] = flip_u32(tdi_buffer
[i
],8);
668 result
= armjtagew_usb_message(armjtagew_handle
, 3 + 2 * byte_length
, byte_length
+ 4);
674 stat_local
= (int)buf_get_u32(usb_in_buffer
+ byte_length
, 0, 32);
676 LOG_ERROR("armjtagew_tap_execute, emulator returned error code %d for a CMD_TAP_SHIFT command", stat_local
);
677 return ERROR_JTAG_QUEUE_FAILED
;
680 for (i
= 0; i
< byte_length
; i
++)
682 tdo_buffer
[i
] = flip_u32(usb_in_buffer
[i
],8);
685 for (i
= 0; i
< pending_scan_results_length
; i
++)
687 struct pending_scan_result
*pending_scan_result
= &pending_scan_results_buffer
[i
];
688 uint8_t *buffer
= pending_scan_result
->buffer
;
689 int length
= pending_scan_result
->length
;
690 int first
= pending_scan_result
->first
;
691 struct scan_command
*command
= pending_scan_result
->command
;
694 buf_set_buf(tdo_buffer
, first
, buffer
, 0, length
);
696 DEBUG_JTAG_IO("pending scan result, length = %d", length
);
698 #ifdef _DEBUG_USB_COMMS_
699 armjtagew_debug_buffer(buffer
, byte_length
);
702 if (jtag_read_buffer(buffer
, command
) != ERROR_OK
)
704 armjtagew_tap_init();
705 return ERROR_JTAG_QUEUE_FAILED
;
708 if (pending_scan_result
->buffer
!= NULL
)
710 free(pending_scan_result
->buffer
);
716 LOG_ERROR("armjtagew_tap_execute, wrong result %d, expected %d", result
, byte_length
);
717 return ERROR_JTAG_QUEUE_FAILED
;
720 armjtagew_tap_init();
726 /*****************************************************************************/
727 /* JLink USB low-level functions */
729 static struct armjtagew
* armjtagew_usb_open()
733 const uint16_t vids
[] = { USB_VID
, 0 };
734 const uint16_t pids
[] = { USB_PID
, 0 };
735 struct usb_dev_handle
*dev
;
736 if (jtag_usb_open(vids
, pids
, &dev
) != ERROR_OK
)
739 struct armjtagew
*result
= malloc(sizeof(struct armjtagew
));
740 result
->usb_handle
= dev
;
743 /* usb_set_configuration required under win32 */
744 usb_set_configuration(dev
, dev
->config
[0].bConfigurationValue
);
746 usb_claim_interface(dev
, 0);
749 * This makes problems under Mac OS X. And is not needed
750 * under Windows. Hopefully this will not break a linux build
752 usb_set_altinterface(dev
, 0);
757 static void armjtagew_usb_close(struct armjtagew
*armjtagew
)
759 usb_close(armjtagew
->usb_handle
);
763 /* Send a message and receive the reply. */
764 static int armjtagew_usb_message(struct armjtagew
*armjtagew
, int out_length
, int in_length
)
768 result
= armjtagew_usb_write(armjtagew
, out_length
);
769 if (result
== out_length
)
771 result
= armjtagew_usb_read(armjtagew
, in_length
);
772 if (result
!= in_length
)
774 LOG_ERROR("usb_bulk_read failed (requested=%d, result=%d)", in_length
, result
);
780 LOG_ERROR("usb_bulk_write failed (requested=%d, result=%d)", out_length
, result
);
786 /* Write data from out_buffer to USB. */
787 static int armjtagew_usb_write(struct armjtagew
*armjtagew
, int out_length
)
791 if (out_length
> ARMJTAGEW_OUT_BUFFER_SIZE
)
793 LOG_ERROR("armjtagew_write illegal out_length=%d (max=%d)", out_length
, ARMJTAGEW_OUT_BUFFER_SIZE
);
797 result
= usb_bulk_write(armjtagew
->usb_handle
, ARMJTAGEW_EPT_BULK_OUT
, \
798 (char*)usb_out_buffer
, out_length
, ARMJTAGEW_USB_TIMEOUT
);
800 DEBUG_JTAG_IO("armjtagew_usb_write, out_length = %d, result = %d", out_length
, result
);
802 #ifdef _DEBUG_USB_COMMS_
803 armjtagew_debug_buffer(usb_out_buffer
, out_length
);
808 /* Read data from USB into in_buffer. */
809 static int armjtagew_usb_read(struct armjtagew
*armjtagew
, int exp_in_length
)
811 int result
= usb_bulk_read(armjtagew
->usb_handle
, ARMJTAGEW_EPT_BULK_IN
, \
812 (char*)usb_in_buffer
, exp_in_length
, ARMJTAGEW_USB_TIMEOUT
);
814 DEBUG_JTAG_IO("armjtagew_usb_read, result = %d", result
);
816 #ifdef _DEBUG_USB_COMMS_
817 armjtagew_debug_buffer(usb_in_buffer
, result
);
823 #ifdef _DEBUG_USB_COMMS_
824 #define BYTES_PER_LINE 16
826 static void armjtagew_debug_buffer(uint8_t *buffer
, int length
)
833 for (i
= 0; i
< length
; i
+= BYTES_PER_LINE
)
835 snprintf(line
, 5, "%04x", i
);
836 for (j
= i
; j
< i
+ BYTES_PER_LINE
&& j
< length
; j
++)
838 snprintf(s
, 4, " %02x", buffer
[j
]);
841 LOG_DEBUG("%s", line
);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)