1 /***************************************************************************
2 * Copyright (C) 2009 by Øyvind Harboe *
3 * Øyvind Harboe <oyvind.harboe@zylin.com> *
5 * Copyright (C) 2009 by SoftPLC Corporation. http://softplc.com *
6 * Dick Hollenbeck <dick@softplc.com> *
8 * Copyright (C) 2004, 2006 by Dominic Rath *
9 * Dominic.Rath@gmx.de *
11 * Copyright (C) 2008 by Spencer Oliver *
12 * spen@spen-soft.co.uk *
14 * This program is free software; you can redistribute it and/or modify *
15 * it under the terms of the GNU General Public License as published by *
16 * the Free Software Foundation; either version 2 of the License, or *
17 * (at your option) any later version. *
19 * This program is distributed in the hope that it will be useful, *
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
22 * GNU General Public License for more details. *
24 * You should have received a copy of the GNU General Public License *
25 * along with this program; if not, write to the *
26 * Free Software Foundation, Inc., *
27 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
28 ***************************************************************************/
32 * JTAG adapters based on the FT2232 full and high speed USB parts are
33 * popular low cost JTAG debug solutions. Many FT2232 based JTAG adapters
34 * are discrete, but development boards may integrate them as alternatives
35 * to more capable (and expensive) third party JTAG pods. Since JTAG uses
36 * only one of the two ports on these devices, on integrated boards the
37 * second port often serves as a USB-to-serial adapter for the target's
38 * console UART even when the JTAG port is not in use. (Systems which
39 * support ARM's SWD in addition to JTAG, or instead of it, may use that
40 * second port for reading SWV trace data.)
42 * FT2232 based JTAG adapters are "dumb" not "smart", because most JTAG
43 * request/response interactions involve round trips over the USB link.
44 * A "smart" JTAG adapter has intelligence close to the scan chain, so it
45 * can for example poll quickly for a status change (usually taking on the
46 * order of microseconds not milliseconds) before beginning a queued
47 * transaction which require the previous one to have completed.
49 * There are dozens of adapters of this type, differing in details which
50 * this driver needs to understand. Those "layout" details are required
51 * as part of FT2232 driver configuration.
53 * This code uses information contained in the MPSSE specification which was
55 * http://www.ftdichip.com/Documents/AppNotes/AN2232C-01_MPSSE_Cmnd.pdf
56 * Hereafter this is called the "MPSSE Spec".
58 * The datasheet for the ftdichip.com's FT2232D part is here:
59 * http://www.ftdichip.com/Documents/DataSheets/DS_FT2232D.pdf
61 * Also note the issue with code 0x4b (clock data to TMS) noted in
62 * http://developer.intra2net.com/mailarchive/html/libftdi/2009/msg00292.html
63 * which can affect longer JTAG state paths.
70 /* project specific includes */
71 #include <jtag/interface.h>
72 #include <helper/time_support.h>
80 #if (BUILD_FT2232_FTD2XX == 1 && BUILD_FT2232_LIBFTDI == 1)
81 #error "BUILD_FT2232_FTD2XX && BUILD_FT2232_LIBFTDI are mutually exclusive"
82 #elif (BUILD_FT2232_FTD2XX != 1 && BUILD_FT2232_LIBFTDI != 1)
83 #error "BUILD_FT2232_FTD2XX || BUILD_FT2232_LIBFTDI must be chosen"
86 /* FT2232 access library includes */
87 #if BUILD_FT2232_FTD2XX == 1
89 #elif BUILD_FT2232_LIBFTDI == 1
93 /* max TCK for the high speed devices 30000 kHz */
94 #define FTDI_2232H_4232H_MAX_TCK 30000
95 /* max TCK for the full speed devices 6000 kHz */
96 #define FTDI_2232C_MAX_TCK 6000
97 /* this speed value tells that RTCK is requested */
101 * On my Athlon XP 1900+ EHCI host with FT2232H JTAG dongle I get read timeout
102 * errors with a retry count of 100. Increasing it solves the problem for me.
105 * FIXME There's likely an issue with the usb_read_timeout from libftdi.
106 * Fix that (libusb? kernel? libftdi? here?) and restore the retry count
109 #define LIBFTDI_READ_RETRY_COUNT 2000
111 #ifndef BUILD_FT2232_HIGHSPEED
112 #if BUILD_FT2232_FTD2XX == 1
113 enum { FT_DEVICE_2232H
= 6, FT_DEVICE_4232H
};
114 #elif BUILD_FT2232_LIBFTDI == 1
115 enum { TYPE_2232H
= 4, TYPE_4232H
= 5 };
120 * Send out \a num_cycles on the TCK line while the TAP(s) are in a
121 * stable state. Calling code must ensure that current state is stable,
122 * that verification is not done in here.
124 * @param num_cycles The number of clocks cycles to send.
125 * @param cmd The command to send.
127 * @returns ERROR_OK on success, or ERROR_JTAG_QUEUE_FAILED on failure.
129 static int ft2232_stableclocks(int num_cycles
, struct jtag_command
* cmd
);
131 static char * ft2232_device_desc_A
= NULL
;
132 static char* ft2232_device_desc
= NULL
;
133 static char* ft2232_serial
= NULL
;
134 static char* ft2232_layout
= NULL
;
135 static uint8_t ft2232_latency
= 2;
136 static unsigned ft2232_max_tck
= FTDI_2232C_MAX_TCK
;
138 #define MAX_USB_IDS 8
139 /* vid = pid = 0 marks the end of the list */
140 static uint16_t ft2232_vid
[MAX_USB_IDS
+ 1] = { 0x0403, 0 };
141 static uint16_t ft2232_pid
[MAX_USB_IDS
+ 1] = { 0x6010, 0 };
143 struct ft2232_layout
{
146 void (*reset
)(int trst
, int srst
);
150 /* init procedures for supported layouts */
151 static int usbjtag_init(void);
152 static int jtagkey_init(void);
153 static int olimex_jtag_init(void);
154 static int flyswatter_init(void);
155 static int turtle_init(void);
156 static int comstick_init(void);
157 static int stm32stick_init(void);
158 static int axm0432_jtag_init(void);
159 static int sheevaplug_init(void);
160 static int icebear_jtag_init(void);
161 static int cortino_jtag_init(void);
162 static int signalyzer_h_init(void);
163 static int ktlink_init(void);
165 /* reset procedures for supported layouts */
166 static void usbjtag_reset(int trst
, int srst
);
167 static void jtagkey_reset(int trst
, int srst
);
168 static void olimex_jtag_reset(int trst
, int srst
);
169 static void flyswatter_reset(int trst
, int srst
);
170 static void turtle_reset(int trst
, int srst
);
171 static void comstick_reset(int trst
, int srst
);
172 static void stm32stick_reset(int trst
, int srst
);
173 static void axm0432_jtag_reset(int trst
, int srst
);
174 static void sheevaplug_reset(int trst
, int srst
);
175 static void icebear_jtag_reset(int trst
, int srst
);
176 static void signalyzer_h_reset(int trst
, int srst
);
177 static void ktlink_reset(int trst
, int srst
);
179 /* blink procedures for layouts that support a blinking led */
180 static void olimex_jtag_blink(void);
181 static void flyswatter_jtag_blink(void);
182 static void turtle_jtag_blink(void);
183 static void signalyzer_h_blink(void);
184 static void ktlink_blink(void);
186 static const struct ft2232_layout ft2232_layouts
[] =
189 .init
= usbjtag_init
,
190 .reset
= usbjtag_reset
,
193 .init
= jtagkey_init
,
194 .reset
= jtagkey_reset
,
196 { .name
= "jtagkey_prototype_v1",
197 .init
= jtagkey_init
,
198 .reset
= jtagkey_reset
,
200 { .name
= "oocdlink",
201 .init
= jtagkey_init
,
202 .reset
= jtagkey_reset
,
204 { .name
= "signalyzer",
205 .init
= usbjtag_init
,
206 .reset
= usbjtag_reset
,
208 { .name
= "evb_lm3s811",
209 .init
= usbjtag_init
,
210 .reset
= usbjtag_reset
,
212 { .name
= "luminary_icdi",
213 .init
= usbjtag_init
,
214 .reset
= usbjtag_reset
,
216 { .name
= "olimex-jtag",
217 .init
= olimex_jtag_init
,
218 .reset
= olimex_jtag_reset
,
219 .blink
= olimex_jtag_blink
221 { .name
= "flyswatter",
222 .init
= flyswatter_init
,
223 .reset
= flyswatter_reset
,
224 .blink
= flyswatter_jtag_blink
226 { .name
= "turtelizer2",
228 .reset
= turtle_reset
,
229 .blink
= turtle_jtag_blink
231 { .name
= "comstick",
232 .init
= comstick_init
,
233 .reset
= comstick_reset
,
235 { .name
= "stm32stick",
236 .init
= stm32stick_init
,
237 .reset
= stm32stick_reset
,
239 { .name
= "axm0432_jtag",
240 .init
= axm0432_jtag_init
,
241 .reset
= axm0432_jtag_reset
,
243 { .name
= "sheevaplug",
244 .init
= sheevaplug_init
,
245 .reset
= sheevaplug_reset
,
248 .init
= icebear_jtag_init
,
249 .reset
= icebear_jtag_reset
,
252 .init
= cortino_jtag_init
,
253 .reset
= comstick_reset
,
255 { .name
= "signalyzer-h",
256 .init
= signalyzer_h_init
,
257 .reset
= signalyzer_h_reset
,
258 .blink
= signalyzer_h_blink
262 .reset
= ktlink_reset
,
263 .blink
= ktlink_blink
265 { .name
= NULL
, /* END OF TABLE */ },
268 static uint8_t nTRST
, nTRSTnOE
, nSRST
, nSRSTnOE
;
270 static const struct ft2232_layout
*layout
;
271 static uint8_t low_output
= 0x0;
272 static uint8_t low_direction
= 0x0;
273 static uint8_t high_output
= 0x0;
274 static uint8_t high_direction
= 0x0;
276 #if BUILD_FT2232_FTD2XX == 1
277 static FT_HANDLE ftdih
= NULL
;
278 static FT_DEVICE ftdi_device
= 0;
279 #elif BUILD_FT2232_LIBFTDI == 1
280 static struct ftdi_context ftdic
;
281 static enum ftdi_chip_type ftdi_device
;
284 static struct jtag_command
* first_unsent
; /* next command that has to be sent */
285 static int require_send
;
287 /* http://urjtag.wiki.sourceforge.net/Cable + FT2232 says:
289 "There is a significant difference between libftdi and libftd2xx. The latter
290 one allows to schedule up to 64*64 bytes of result data while libftdi fails
291 with more than 4*64. As a consequence, the FT2232 driver is forced to
292 perform around 16x more USB transactions for long command streams with TDO
293 capture when running with libftdi."
296 #define FT2232_BUFFER_SIZE 131072
297 a comment would have been nice.
300 #define FT2232_BUFFER_SIZE 131072
302 static uint8_t* ft2232_buffer
= NULL
;
303 static int ft2232_buffer_size
= 0;
304 static int ft2232_read_pointer
= 0;
305 static int ft2232_expect_read
= 0;
308 * Function buffer_write
309 * writes a byte into the byte buffer, "ft2232_buffer", which must be sent later.
310 * @param val is the byte to send.
312 static inline void buffer_write(uint8_t val
)
314 assert(ft2232_buffer
);
315 assert((unsigned) ft2232_buffer_size
< (unsigned) FT2232_BUFFER_SIZE
);
316 ft2232_buffer
[ft2232_buffer_size
++] = val
;
320 * Function buffer_read
321 * returns a byte from the byte buffer.
323 static inline uint8_t buffer_read(void)
325 assert(ft2232_buffer
);
326 assert(ft2232_read_pointer
< ft2232_buffer_size
);
327 return ft2232_buffer
[ft2232_read_pointer
++];
331 * Clocks out \a bit_count bits on the TMS line, starting with the least
332 * significant bit of tms_bits and progressing to more significant bits.
333 * Rigorous state transition logging is done here via tap_set_state().
335 * @param mpsse_cmd One of the MPSSE TMS oriented commands such as
336 * 0x4b or 0x6b. See the MPSSE spec referenced above for their
337 * functionality. The MPSSE command "Clock Data to TMS/CS Pin (no Read)"
338 * is often used for this, 0x4b.
340 * @param tms_bits Holds the sequence of bits to send.
341 * @param tms_count Tells how many bits in the sequence.
342 * @param tdi_bit A single bit to pass on to TDI before the first TCK
343 * cycle and held static for the duration of TMS clocking.
345 * See the MPSSE spec referenced above.
347 static void clock_tms(uint8_t mpsse_cmd
, int tms_bits
, int tms_count
, bool tdi_bit
)
351 int tms_ndx
; /* bit index into tms_byte */
353 assert(tms_count
> 0);
355 DEBUG_JTAG_IO("mpsse cmd=%02x, tms_bits = 0x%08x, bit_count=%d",
356 mpsse_cmd
, tms_bits
, tms_count
);
358 for (tms_byte
= tms_ndx
= i
= 0; i
< tms_count
; ++i
, tms_bits
>>=1)
360 bool bit
= tms_bits
& 1;
363 tms_byte
|= (1 << tms_ndx
);
365 /* always do state transitions in public view */
366 tap_set_state(tap_state_transition(tap_get_state(), bit
));
368 /* we wrote a bit to tms_byte just above, increment bit index. if bit was zero
373 if (tms_ndx
== 7 || i
== tms_count
-1)
375 buffer_write(mpsse_cmd
);
376 buffer_write(tms_ndx
- 1);
378 /* Bit 7 of the byte is passed on to TDI/DO before the first TCK/SK of
379 TMS/CS and is held static for the duration of TMS/CS clocking.
381 buffer_write(tms_byte
| (tdi_bit
<< 7));
387 * Function get_tms_buffer_requirements
388 * returns what clock_tms() will consume if called with
391 static inline int get_tms_buffer_requirements(int bit_count
)
393 return ((bit_count
+ 6)/7) * 3;
397 * Function move_to_state
398 * moves the TAP controller from the current state to a
399 * \a goal_state through a path given by tap_get_tms_path(). State transition
400 * logging is performed by delegation to clock_tms().
402 * @param goal_state is the destination state for the move.
404 static void move_to_state(tap_state_t goal_state
)
406 tap_state_t start_state
= tap_get_state();
408 /* goal_state is 1/2 of a tuple/pair of states which allow convenient
409 lookup of the required TMS pattern to move to this state from the
413 /* do the 2 lookups */
414 int tms_bits
= tap_get_tms_path(start_state
, goal_state
);
415 int tms_count
= tap_get_tms_path_len(start_state
, goal_state
);
417 DEBUG_JTAG_IO("start=%s goal=%s", tap_state_name(start_state
), tap_state_name(goal_state
));
419 clock_tms(0x4b, tms_bits
, tms_count
, 0);
422 static int ft2232_write(uint8_t* buf
, int size
, uint32_t* bytes_written
)
424 #if BUILD_FT2232_FTD2XX == 1
426 DWORD dw_bytes_written
;
427 if ((status
= FT_Write(ftdih
, buf
, size
, &dw_bytes_written
)) != FT_OK
)
429 *bytes_written
= dw_bytes_written
;
430 LOG_ERROR("FT_Write returned: %lu", status
);
431 return ERROR_JTAG_DEVICE_ERROR
;
435 *bytes_written
= dw_bytes_written
;
438 #elif BUILD_FT2232_LIBFTDI == 1
440 if ((retval
= ftdi_write_data(&ftdic
, buf
, size
)) < 0)
443 LOG_ERROR("ftdi_write_data: %s", ftdi_get_error_string(&ftdic
));
444 return ERROR_JTAG_DEVICE_ERROR
;
448 *bytes_written
= retval
;
454 static int ft2232_read(uint8_t* buf
, uint32_t size
, uint32_t* bytes_read
)
456 #if BUILD_FT2232_FTD2XX == 1
462 while ((*bytes_read
< size
) && timeout
--)
464 if ((status
= FT_Read(ftdih
, buf
+ *bytes_read
, size
-
465 *bytes_read
, &dw_bytes_read
)) != FT_OK
)
468 LOG_ERROR("FT_Read returned: %lu", status
);
469 return ERROR_JTAG_DEVICE_ERROR
;
471 *bytes_read
+= dw_bytes_read
;
474 #elif BUILD_FT2232_LIBFTDI == 1
476 int timeout
= LIBFTDI_READ_RETRY_COUNT
;
479 while ((*bytes_read
< size
) && timeout
--)
481 if ((retval
= ftdi_read_data(&ftdic
, buf
+ *bytes_read
, size
- *bytes_read
)) < 0)
484 LOG_ERROR("ftdi_read_data: %s", ftdi_get_error_string(&ftdic
));
485 return ERROR_JTAG_DEVICE_ERROR
;
487 *bytes_read
+= retval
;
492 if (*bytes_read
< size
)
494 LOG_ERROR("couldn't read enough bytes from "
495 "FT2232 device (%i < %i)",
496 (unsigned)*bytes_read
,
498 return ERROR_JTAG_DEVICE_ERROR
;
504 static bool ft2232_device_is_highspeed(void)
506 #if BUILD_FT2232_FTD2XX == 1
507 return (ftdi_device
== FT_DEVICE_2232H
) || (ftdi_device
== FT_DEVICE_4232H
);
508 #elif BUILD_FT2232_LIBFTDI == 1
509 return (ftdi_device
== TYPE_2232H
|| ftdi_device
== TYPE_4232H
);
514 * Commands that only apply to the FT2232H and FT4232H devices.
515 * See chapter 6 in http://www.ftdichip.com/Documents/AppNotes/
516 * AN_108_Command_Processor_for_MPSSE_and_MCU_Host_Bus_Emulation_Modes.pdf
519 static int ft2232h_ft4232h_adaptive_clocking(bool enable
)
521 uint8_t buf
= enable
? 0x96 : 0x97;
522 LOG_DEBUG("%2.2x", buf
);
524 uint32_t bytes_written
;
525 int retval
= ft2232_write(&buf
, 1, &bytes_written
);
526 if ((ERROR_OK
!= retval
) || (bytes_written
!= 1))
528 LOG_ERROR("couldn't write command to %s adaptive clocking"
529 , enable
? "enable" : "disable");
537 * Enable/disable the clk divide by 5 of the 60MHz master clock.
538 * This result in a JTAG clock speed range of 91.553Hz-6MHz
539 * respective 457.763Hz-30MHz.
541 static int ft2232h_ft4232h_clk_divide_by_5(bool enable
)
543 uint32_t bytes_written
;
544 uint8_t buf
= enable
? 0x8b : 0x8a;
545 int retval
= ft2232_write(&buf
, 1, &bytes_written
);
546 if ((ERROR_OK
!= retval
) || (bytes_written
!= 1))
548 LOG_ERROR("couldn't write command to %s clk divide by 5"
549 , enable
? "enable" : "disable");
550 return ERROR_JTAG_INIT_FAILED
;
552 ft2232_max_tck
= enable
? FTDI_2232C_MAX_TCK
: FTDI_2232H_4232H_MAX_TCK
;
553 LOG_INFO("max TCK change to: %u kHz", ft2232_max_tck
);
558 static int ft2232_speed(int speed
)
562 uint32_t bytes_written
;
565 bool enable_adaptive_clocking
= (RTCK_SPEED
== speed
);
566 if (ft2232_device_is_highspeed())
567 retval
= ft2232h_ft4232h_adaptive_clocking(enable_adaptive_clocking
);
568 else if (enable_adaptive_clocking
)
570 LOG_ERROR("ft2232 device %lu does not support RTCK"
571 , (long unsigned int)ftdi_device
);
575 if ((enable_adaptive_clocking
) || (ERROR_OK
!= retval
))
578 buf
[0] = 0x86; /* command "set divisor" */
579 buf
[1] = speed
& 0xff; /* valueL (0 = 6MHz, 1 = 3MHz, 2 = 2.0MHz, ...*/
580 buf
[2] = (speed
>> 8) & 0xff; /* valueH */
582 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
583 if (((retval
= ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
585 LOG_ERROR("couldn't set FT2232 TCK speed");
592 static int ft2232_speed_div(int speed
, int* khz
)
594 /* Take a look in the FT2232 manual,
595 * AN2232C-01 Command Processor for
596 * MPSSE and MCU Host Bus. Chapter 3.8 */
598 *khz
= (RTCK_SPEED
== speed
) ? 0 : ft2232_max_tck
/ (1 + speed
);
603 static int ft2232_khz(int khz
, int* jtag_speed
)
607 if (ft2232_device_is_highspeed())
609 *jtag_speed
= RTCK_SPEED
;
614 LOG_DEBUG("RCLK not supported");
619 /* Take a look in the FT2232 manual,
620 * AN2232C-01 Command Processor for
621 * MPSSE and MCU Host Bus. Chapter 3.8
623 * We will calc here with a multiplier
624 * of 10 for better rounding later. */
626 /* Calc speed, (ft2232_max_tck / khz) - 1 */
627 /* Use 65000 for better rounding */
628 *jtag_speed
= ((ft2232_max_tck
*10) / khz
) - 10;
630 /* Add 0.9 for rounding */
633 /* Calc real speed */
634 *jtag_speed
= *jtag_speed
/ 10;
636 /* Check if speed is greater than 0 */
642 /* Check max value */
643 if (*jtag_speed
> 0xFFFF)
645 *jtag_speed
= 0xFFFF;
651 static void ft2232_end_state(tap_state_t state
)
653 if (tap_is_state_stable(state
))
654 tap_set_end_state(state
);
657 LOG_ERROR("BUG: %s is not a stable end state", tap_state_name(state
));
662 static void ft2232_read_scan(enum scan_type type
, uint8_t* buffer
, int scan_size
)
664 int num_bytes
= (scan_size
+ 7) / 8;
665 int bits_left
= scan_size
;
668 while (num_bytes
-- > 1)
670 buffer
[cur_byte
++] = buffer_read();
674 buffer
[cur_byte
] = 0x0;
676 /* There is one more partial byte left from the clock data in/out instructions */
679 buffer
[cur_byte
] = buffer_read() >> 1;
681 /* This shift depends on the length of the clock data to tms instruction, insterted at end of the scan, now fixed to a two step transition in ft2232_add_scan */
682 buffer
[cur_byte
] = (buffer
[cur_byte
] | (((buffer_read()) << 1) & 0x80)) >> (8 - bits_left
);
685 static void ft2232_debug_dump_buffer(void)
691 for (i
= 0; i
< ft2232_buffer_size
; i
++)
693 line_p
+= snprintf(line_p
, 256 - (line_p
- line
), "%2.2x ", ft2232_buffer
[i
]);
696 LOG_DEBUG("%s", line
);
702 LOG_DEBUG("%s", line
);
705 static int ft2232_send_and_recv(struct jtag_command
* first
, struct jtag_command
* last
)
707 struct jtag_command
* cmd
;
712 uint32_t bytes_written
= 0;
713 uint32_t bytes_read
= 0;
715 #ifdef _DEBUG_USB_IO_
716 struct timeval start
, inter
, inter2
, end
;
717 struct timeval d_inter
, d_inter2
, d_end
;
720 #ifdef _DEBUG_USB_COMMS_
721 LOG_DEBUG("write buffer (size %i):", ft2232_buffer_size
);
722 ft2232_debug_dump_buffer();
725 #ifdef _DEBUG_USB_IO_
726 gettimeofday(&start
, NULL
);
729 if ((retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
)) != ERROR_OK
)
731 LOG_ERROR("couldn't write MPSSE commands to FT2232");
735 #ifdef _DEBUG_USB_IO_
736 gettimeofday(&inter
, NULL
);
739 if (ft2232_expect_read
)
741 /* FIXME this "timeout" is never changed ... */
742 int timeout
= LIBFTDI_READ_RETRY_COUNT
;
743 ft2232_buffer_size
= 0;
745 #ifdef _DEBUG_USB_IO_
746 gettimeofday(&inter2
, NULL
);
749 if ((retval
= ft2232_read(ft2232_buffer
, ft2232_expect_read
, &bytes_read
)) != ERROR_OK
)
751 LOG_ERROR("couldn't read from FT2232");
755 #ifdef _DEBUG_USB_IO_
756 gettimeofday(&end
, NULL
);
758 timeval_subtract(&d_inter
, &inter
, &start
);
759 timeval_subtract(&d_inter2
, &inter2
, &start
);
760 timeval_subtract(&d_end
, &end
, &start
);
762 LOG_INFO("inter: %u.%06u, inter2: %u.%06u end: %u.%06u",
763 (unsigned)d_inter
.tv_sec
, (unsigned)d_inter
.tv_usec
,
764 (unsigned)d_inter2
.tv_sec
, (unsigned)d_inter2
.tv_usec
,
765 (unsigned)d_end
.tv_sec
, (unsigned)d_end
.tv_usec
);
768 ft2232_buffer_size
= bytes_read
;
770 if (ft2232_expect_read
!= ft2232_buffer_size
)
772 LOG_ERROR("ft2232_expect_read (%i) != "
773 "ft2232_buffer_size (%i) "
777 LIBFTDI_READ_RETRY_COUNT
- timeout
);
778 ft2232_debug_dump_buffer();
783 #ifdef _DEBUG_USB_COMMS_
784 LOG_DEBUG("read buffer (%i retries): %i bytes",
785 LIBFTDI_READ_RETRY_COUNT
- timeout
,
787 ft2232_debug_dump_buffer();
791 ft2232_expect_read
= 0;
792 ft2232_read_pointer
= 0;
794 /* return ERROR_OK, unless a jtag_read_buffer returns a failed check
795 * that wasn't handled by a caller-provided error handler
805 type
= jtag_scan_type(cmd
->cmd
.scan
);
806 if (type
!= SCAN_OUT
)
808 scan_size
= jtag_scan_size(cmd
->cmd
.scan
);
809 buffer
= calloc(DIV_ROUND_UP(scan_size
, 8), 1);
810 ft2232_read_scan(type
, buffer
, scan_size
);
811 if (jtag_read_buffer(buffer
, cmd
->cmd
.scan
) != ERROR_OK
)
812 retval
= ERROR_JTAG_QUEUE_FAILED
;
824 ft2232_buffer_size
= 0;
830 * Function ft2232_add_pathmove
831 * moves the TAP controller from the current state to a new state through the
832 * given path, where path is an array of tap_state_t's.
834 * @param path is an array of tap_stat_t which gives the states to traverse through
835 * ending with the last state at path[num_states-1]
836 * @param num_states is the count of state steps to move through
838 static void ft2232_add_pathmove(tap_state_t
* path
, int num_states
)
842 assert((unsigned) num_states
<= 32u); /* tms_bits only holds 32 bits */
846 /* this loop verifies that the path is legal and logs each state in the path */
849 unsigned char tms_byte
= 0; /* zero this on each MPSSE batch */
851 int num_states_batch
= num_states
> 7 ? 7 : num_states
;
853 /* command "Clock Data to TMS/CS Pin (no Read)" */
856 /* number of states remaining */
857 buffer_write(num_states_batch
- 1);
859 while (num_states_batch
--) {
860 /* either TMS=0 or TMS=1 must work ... */
861 if (tap_state_transition(tap_get_state(), false)
862 == path
[state_count
])
863 buf_set_u32(&tms_byte
, bit_count
++, 1, 0x0);
864 else if (tap_state_transition(tap_get_state(), true)
865 == path
[state_count
])
866 buf_set_u32(&tms_byte
, bit_count
++, 1, 0x1);
868 /* ... or else the caller goofed BADLY */
870 LOG_ERROR("BUG: %s -> %s isn't a valid "
871 "TAP state transition",
872 tap_state_name(tap_get_state()),
873 tap_state_name(path
[state_count
]));
877 tap_set_state(path
[state_count
]);
882 buffer_write(tms_byte
);
884 tap_set_end_state(tap_get_state());
887 static void ft2232_add_scan(bool ir_scan
, enum scan_type type
, uint8_t* buffer
, int scan_size
)
889 int num_bytes
= (scan_size
+ 7) / 8;
890 int bits_left
= scan_size
;
896 if (tap_get_state() != TAP_DRSHIFT
)
898 move_to_state(TAP_DRSHIFT
);
903 if (tap_get_state() != TAP_IRSHIFT
)
905 move_to_state(TAP_IRSHIFT
);
909 /* add command for complete bytes */
910 while (num_bytes
> 1)
915 /* Clock Data Bytes In and Out LSB First */
917 /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
919 else if (type
== SCAN_OUT
)
921 /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
923 /* LOG_DEBUG("added TDI bytes (o)"); */
925 else if (type
== SCAN_IN
)
927 /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
929 /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
932 thisrun_bytes
= (num_bytes
> 65537) ? 65536 : (num_bytes
- 1);
933 num_bytes
-= thisrun_bytes
;
935 buffer_write((uint8_t) (thisrun_bytes
- 1));
936 buffer_write((uint8_t) ((thisrun_bytes
- 1) >> 8));
940 /* add complete bytes */
941 while (thisrun_bytes
-- > 0)
943 buffer_write(buffer
[cur_byte
++]);
947 else /* (type == SCAN_IN) */
949 bits_left
-= 8 * (thisrun_bytes
);
953 /* the most signifcant bit is scanned during TAP movement */
955 last_bit
= (buffer
[cur_byte
] >> (bits_left
- 1)) & 0x1;
959 /* process remaining bits but the last one */
964 /* Clock Data Bits In and Out LSB First */
966 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
968 else if (type
== SCAN_OUT
)
970 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
972 /* LOG_DEBUG("added TDI bits (o)"); */
974 else if (type
== SCAN_IN
)
976 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
978 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
981 buffer_write(bits_left
- 2);
983 buffer_write(buffer
[cur_byte
]);
986 if ((ir_scan
&& (tap_get_end_state() == TAP_IRSHIFT
))
987 || (!ir_scan
&& (tap_get_end_state() == TAP_DRSHIFT
)))
991 /* Clock Data Bits In and Out LSB First */
993 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
995 else if (type
== SCAN_OUT
)
997 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
999 /* LOG_DEBUG("added TDI bits (o)"); */
1001 else if (type
== SCAN_IN
)
1003 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
1005 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
1008 buffer_write(last_bit
);
1016 /* move from Shift-IR/DR to end state */
1017 if (type
!= SCAN_OUT
)
1019 /* We always go to the PAUSE state in two step at the end of an IN or IO scan */
1020 /* This must be coordinated with the bit shifts in ft2232_read_scan */
1023 /* Clock Data to TMS/CS Pin with Read */
1028 tms_bits
= tap_get_tms_path(tap_get_state(), tap_get_end_state());
1029 tms_count
= tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
1030 /* Clock Data to TMS/CS Pin (no Read) */
1034 DEBUG_JTAG_IO("finish %s", (type
== SCAN_OUT
) ? "without read" : "via PAUSE");
1035 clock_tms(mpsse_cmd
, tms_bits
, tms_count
, last_bit
);
1038 if (tap_get_state() != tap_get_end_state())
1040 move_to_state(tap_get_end_state());
1044 static int ft2232_large_scan(struct scan_command
* cmd
, enum scan_type type
, uint8_t* buffer
, int scan_size
)
1046 int num_bytes
= (scan_size
+ 7) / 8;
1047 int bits_left
= scan_size
;
1050 uint8_t* receive_buffer
= malloc(DIV_ROUND_UP(scan_size
, 8));
1051 uint8_t* receive_pointer
= receive_buffer
;
1052 uint32_t bytes_written
;
1053 uint32_t bytes_read
;
1055 int thisrun_read
= 0;
1059 LOG_ERROR("BUG: large IR scans are not supported");
1063 if (tap_get_state() != TAP_DRSHIFT
)
1065 move_to_state(TAP_DRSHIFT
);
1068 if ((retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
)) != ERROR_OK
)
1070 LOG_ERROR("couldn't write MPSSE commands to FT2232");
1073 LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
1074 ft2232_buffer_size
, (int)bytes_written
);
1075 ft2232_buffer_size
= 0;
1077 /* add command for complete bytes */
1078 while (num_bytes
> 1)
1082 if (type
== SCAN_IO
)
1084 /* Clock Data Bytes In and Out LSB First */
1086 /* LOG_DEBUG("added TDI bytes (io %i)", num_bytes); */
1088 else if (type
== SCAN_OUT
)
1090 /* Clock Data Bytes Out on -ve Clock Edge LSB First (no Read) */
1092 /* LOG_DEBUG("added TDI bytes (o)"); */
1094 else if (type
== SCAN_IN
)
1096 /* Clock Data Bytes In on +ve Clock Edge LSB First (no Write) */
1098 /* LOG_DEBUG("added TDI bytes (i %i)", num_bytes); */
1101 thisrun_bytes
= (num_bytes
> 65537) ? 65536 : (num_bytes
- 1);
1102 thisrun_read
= thisrun_bytes
;
1103 num_bytes
-= thisrun_bytes
;
1104 buffer_write((uint8_t) (thisrun_bytes
- 1));
1105 buffer_write((uint8_t) ((thisrun_bytes
- 1) >> 8));
1107 if (type
!= SCAN_IN
)
1109 /* add complete bytes */
1110 while (thisrun_bytes
-- > 0)
1112 buffer_write(buffer
[cur_byte
]);
1117 else /* (type == SCAN_IN) */
1119 bits_left
-= 8 * (thisrun_bytes
);
1122 if ((retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
)) != ERROR_OK
)
1124 LOG_ERROR("couldn't write MPSSE commands to FT2232");
1127 LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
1129 (int)bytes_written
);
1130 ft2232_buffer_size
= 0;
1132 if (type
!= SCAN_OUT
)
1134 if ((retval
= ft2232_read(receive_pointer
, thisrun_read
, &bytes_read
)) != ERROR_OK
)
1136 LOG_ERROR("couldn't read from FT2232");
1139 LOG_DEBUG("thisrun_read: %i, bytes_read: %i",
1142 receive_pointer
+= bytes_read
;
1148 /* the most signifcant bit is scanned during TAP movement */
1149 if (type
!= SCAN_IN
)
1150 last_bit
= (buffer
[cur_byte
] >> (bits_left
- 1)) & 0x1;
1154 /* process remaining bits but the last one */
1157 if (type
== SCAN_IO
)
1159 /* Clock Data Bits In and Out LSB First */
1161 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
1163 else if (type
== SCAN_OUT
)
1165 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
1167 /* LOG_DEBUG("added TDI bits (o)"); */
1169 else if (type
== SCAN_IN
)
1171 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
1173 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
1175 buffer_write(bits_left
- 2);
1176 if (type
!= SCAN_IN
)
1177 buffer_write(buffer
[cur_byte
]);
1179 if (type
!= SCAN_OUT
)
1183 if (tap_get_end_state() == TAP_DRSHIFT
)
1185 if (type
== SCAN_IO
)
1187 /* Clock Data Bits In and Out LSB First */
1189 /* LOG_DEBUG("added TDI bits (io) %i", bits_left - 1); */
1191 else if (type
== SCAN_OUT
)
1193 /* Clock Data Bits Out on -ve Clock Edge LSB First (no Read) */
1195 /* LOG_DEBUG("added TDI bits (o)"); */
1197 else if (type
== SCAN_IN
)
1199 /* Clock Data Bits In on +ve Clock Edge LSB First (no Write) */
1201 /* LOG_DEBUG("added TDI bits (i %i)", bits_left - 1); */
1204 buffer_write(last_bit
);
1208 int tms_bits
= tap_get_tms_path(tap_get_state(), tap_get_end_state());
1209 int tms_count
= tap_get_tms_path_len(tap_get_state(), tap_get_end_state());
1212 /* move from Shift-IR/DR to end state */
1213 if (type
!= SCAN_OUT
)
1215 /* Clock Data to TMS/CS Pin with Read */
1217 /* LOG_DEBUG("added TMS scan (read)"); */
1221 /* Clock Data to TMS/CS Pin (no Read) */
1223 /* LOG_DEBUG("added TMS scan (no read)"); */
1226 DEBUG_JTAG_IO("finish, %s", (type
== SCAN_OUT
) ? "no read" : "read");
1227 clock_tms(mpsse_cmd
, tms_bits
, tms_count
, last_bit
);
1230 if (type
!= SCAN_OUT
)
1233 if ((retval
= ft2232_write(ft2232_buffer
, ft2232_buffer_size
, &bytes_written
)) != ERROR_OK
)
1235 LOG_ERROR("couldn't write MPSSE commands to FT2232");
1238 LOG_DEBUG("ft2232_buffer_size: %i, bytes_written: %i",
1240 (int)bytes_written
);
1241 ft2232_buffer_size
= 0;
1243 if (type
!= SCAN_OUT
)
1245 if ((retval
= ft2232_read(receive_pointer
, thisrun_read
, &bytes_read
)) != ERROR_OK
)
1247 LOG_ERROR("couldn't read from FT2232");
1250 LOG_DEBUG("thisrun_read: %i, bytes_read: %i",
1253 receive_pointer
+= bytes_read
;
1259 static int ft2232_predict_scan_out(int scan_size
, enum scan_type type
)
1261 int predicted_size
= 3;
1262 int num_bytes
= (scan_size
- 1) / 8;
1264 if (tap_get_state() != TAP_DRSHIFT
)
1265 predicted_size
+= get_tms_buffer_requirements(tap_get_tms_path_len(tap_get_state(), TAP_DRSHIFT
));
1267 if (type
== SCAN_IN
) /* only from device to host */
1269 /* complete bytes */
1270 predicted_size
+= DIV_ROUND_UP(num_bytes
, 65536) * 3;
1272 /* remaining bits - 1 (up to 7) */
1273 predicted_size
+= ((scan_size
- 1) % 8) ? 2 : 0;
1275 else /* host to device, or bidirectional */
1277 /* complete bytes */
1278 predicted_size
+= num_bytes
+ DIV_ROUND_UP(num_bytes
, 65536) * 3;
1280 /* remaining bits -1 (up to 7) */
1281 predicted_size
+= ((scan_size
- 1) % 8) ? 3 : 0;
1284 return predicted_size
;
1287 static int ft2232_predict_scan_in(int scan_size
, enum scan_type type
)
1289 int predicted_size
= 0;
1291 if (type
!= SCAN_OUT
)
1293 /* complete bytes */
1294 predicted_size
+= (DIV_ROUND_UP(scan_size
, 8) > 1) ? (DIV_ROUND_UP(scan_size
, 8) - 1) : 0;
1296 /* remaining bits - 1 */
1297 predicted_size
+= ((scan_size
- 1) % 8) ? 1 : 0;
1299 /* last bit (from TMS scan) */
1300 predicted_size
+= 1;
1303 /* LOG_DEBUG("scan_size: %i, predicted_size: %i", scan_size, predicted_size); */
1305 return predicted_size
;
1308 static void usbjtag_reset(int trst
, int srst
)
1310 enum reset_types jtag_reset_config
= jtag_get_reset_config();
1313 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1314 low_direction
|= nTRSTnOE
; /* switch to output pin (output is low) */
1316 low_output
&= ~nTRST
; /* switch output low */
1320 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1321 low_direction
&= ~nTRSTnOE
; /* switch to input pin (high-Z + internal and external pullup) */
1323 low_output
|= nTRST
; /* switch output high */
1328 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1329 low_output
&= ~nSRST
; /* switch output low */
1331 low_direction
|= nSRSTnOE
; /* switch to output pin (output is low) */
1335 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1336 low_output
|= nSRST
; /* switch output high */
1338 low_direction
&= ~nSRSTnOE
; /* switch to input pin (high-Z) */
1341 /* command "set data bits low byte" */
1343 buffer_write(low_output
);
1344 buffer_write(low_direction
);
1347 static void jtagkey_reset(int trst
, int srst
)
1349 enum reset_types jtag_reset_config
= jtag_get_reset_config();
1352 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1353 high_output
&= ~nTRSTnOE
;
1355 high_output
&= ~nTRST
;
1359 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1360 high_output
|= nTRSTnOE
;
1362 high_output
|= nTRST
;
1367 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1368 high_output
&= ~nSRST
;
1370 high_output
&= ~nSRSTnOE
;
1374 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
1375 high_output
|= nSRST
;
1377 high_output
|= nSRSTnOE
;
1380 /* command "set data bits high byte" */
1382 buffer_write(high_output
);
1383 buffer_write(high_direction
);
1384 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,
1388 static void olimex_jtag_reset(int trst
, int srst
)
1390 enum reset_types jtag_reset_config
= jtag_get_reset_config();
1393 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1394 high_output
&= ~nTRSTnOE
;
1396 high_output
&= ~nTRST
;
1400 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
1401 high_output
|= nTRSTnOE
;
1403 high_output
|= nTRST
;
1408 high_output
|= nSRST
;
1412 high_output
&= ~nSRST
;
1415 /* command "set data bits high byte" */
1417 buffer_write(high_output
);
1418 buffer_write(high_direction
);
1419 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,
1423 static void axm0432_jtag_reset(int trst
, int srst
)
1427 tap_set_state(TAP_RESET
);
1428 high_output
&= ~nTRST
;
1432 high_output
|= nTRST
;
1437 high_output
&= ~nSRST
;
1441 high_output
|= nSRST
;
1444 /* command "set data bits low byte" */
1446 buffer_write(high_output
);
1447 buffer_write(high_direction
);
1448 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,
1452 static void flyswatter_reset(int trst
, int srst
)
1456 low_output
&= ~nTRST
;
1460 low_output
|= nTRST
;
1465 low_output
|= nSRST
;
1469 low_output
&= ~nSRST
;
1472 /* command "set data bits low byte" */
1474 buffer_write(low_output
);
1475 buffer_write(low_direction
);
1476 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst
, srst
, low_output
, low_direction
);
1479 static void turtle_reset(int trst
, int srst
)
1485 low_output
|= nSRST
;
1489 low_output
&= ~nSRST
;
1492 /* command "set data bits low byte" */
1494 buffer_write(low_output
);
1495 buffer_write(low_direction
);
1496 LOG_DEBUG("srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", srst
, low_output
, low_direction
);
1499 static void comstick_reset(int trst
, int srst
)
1503 high_output
&= ~nTRST
;
1507 high_output
|= nTRST
;
1512 high_output
&= ~nSRST
;
1516 high_output
|= nSRST
;
1519 /* command "set data bits high byte" */
1521 buffer_write(high_output
);
1522 buffer_write(high_direction
);
1523 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,
1527 static void stm32stick_reset(int trst
, int srst
)
1531 high_output
&= ~nTRST
;
1535 high_output
|= nTRST
;
1540 low_output
&= ~nSRST
;
1544 low_output
|= nSRST
;
1547 /* command "set data bits low byte" */
1549 buffer_write(low_output
);
1550 buffer_write(low_direction
);
1552 /* command "set data bits high byte" */
1554 buffer_write(high_output
);
1555 buffer_write(high_direction
);
1556 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,
1560 static void sheevaplug_reset(int trst
, int srst
)
1563 high_output
&= ~nTRST
;
1565 high_output
|= nTRST
;
1568 high_output
&= ~nSRSTnOE
;
1570 high_output
|= nSRSTnOE
;
1572 /* command "set data bits high byte" */
1574 buffer_write(high_output
);
1575 buffer_write(high_direction
);
1576 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
, high_direction
);
1579 static int ft2232_execute_runtest(struct jtag_command
*cmd
)
1583 int predicted_size
= 0;
1586 DEBUG_JTAG_IO("runtest %i cycles, end in %s",
1587 cmd
->cmd
.runtest
->num_cycles
,
1588 tap_state_name(cmd
->cmd
.runtest
->end_state
));
1590 /* only send the maximum buffer size that FT2232C can handle */
1592 if (tap_get_state() != TAP_IDLE
)
1593 predicted_size
+= 3;
1594 predicted_size
+= 3 * DIV_ROUND_UP(cmd
->cmd
.runtest
->num_cycles
, 7);
1595 if (cmd
->cmd
.runtest
->end_state
!= TAP_IDLE
)
1596 predicted_size
+= 3;
1597 if (tap_get_end_state() != TAP_IDLE
)
1598 predicted_size
+= 3;
1599 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
)
1601 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1602 retval
= ERROR_JTAG_QUEUE_FAILED
;
1606 if (tap_get_state() != TAP_IDLE
)
1608 move_to_state(TAP_IDLE
);
1611 i
= cmd
->cmd
.runtest
->num_cycles
;
1614 /* there are no state transitions in this code, so omit state tracking */
1616 /* command "Clock Data to TMS/CS Pin (no Read)" */
1620 buffer_write((i
> 7) ? 6 : (i
- 1));
1625 i
-= (i
> 7) ? 7 : i
;
1626 /* LOG_DEBUG("added TMS scan (no read)"); */
1629 ft2232_end_state(cmd
->cmd
.runtest
->end_state
);
1631 if (tap_get_state() != tap_get_end_state())
1633 move_to_state(tap_get_end_state());
1637 DEBUG_JTAG_IO("runtest: %i, end in %s",
1638 cmd
->cmd
.runtest
->num_cycles
,
1639 tap_state_name(tap_get_end_state()));
1643 static int ft2232_execute_statemove(struct jtag_command
*cmd
)
1645 int predicted_size
= 0;
1646 int retval
= ERROR_OK
;
1648 DEBUG_JTAG_IO("statemove end in %s",
1649 tap_state_name(cmd
->cmd
.statemove
->end_state
));
1651 /* only send the maximum buffer size that FT2232C can handle */
1653 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
)
1655 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1656 retval
= ERROR_JTAG_QUEUE_FAILED
;
1660 ft2232_end_state(cmd
->cmd
.statemove
->end_state
);
1662 /* For TAP_RESET, ignore the current recorded state. It's often
1663 * wrong at server startup, and this transation is critical whenever
1666 if (tap_get_end_state() == TAP_RESET
) {
1667 clock_tms(0x4b, 0xff, 5, 0);
1670 /* shortest-path move to desired end state */
1671 } else if (tap_get_state() != tap_get_end_state())
1673 move_to_state(tap_get_end_state());
1680 static int ft2232_execute_pathmove(struct jtag_command
*cmd
)
1682 int predicted_size
= 0;
1683 int retval
= ERROR_OK
;
1685 tap_state_t
* path
= cmd
->cmd
.pathmove
->path
;
1686 int num_states
= cmd
->cmd
.pathmove
->num_states
;
1688 DEBUG_JTAG_IO("pathmove: %i states, current: %s end: %s", num_states
,
1689 tap_state_name(tap_get_state()),
1690 tap_state_name(path
[num_states
-1]));
1692 /* only send the maximum buffer size that FT2232C can handle */
1693 predicted_size
= 3 * DIV_ROUND_UP(num_states
, 7);
1694 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
)
1696 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1697 retval
= ERROR_JTAG_QUEUE_FAILED
;
1703 ft2232_add_pathmove(path
, num_states
);
1709 static int ft2232_execute_scan(struct jtag_command
*cmd
)
1712 int scan_size
; /* size of IR or DR scan */
1713 int predicted_size
= 0;
1714 int retval
= ERROR_OK
;
1716 enum scan_type type
= jtag_scan_type(cmd
->cmd
.scan
);
1718 DEBUG_JTAG_IO("%s type:%d", cmd
->cmd
.scan
->ir_scan
? "IRSCAN" : "DRSCAN", type
);
1720 scan_size
= jtag_build_buffer(cmd
->cmd
.scan
, &buffer
);
1722 predicted_size
= ft2232_predict_scan_out(scan_size
, type
);
1723 if ((predicted_size
+ 1) > FT2232_BUFFER_SIZE
)
1725 LOG_DEBUG("oversized ft2232 scan (predicted_size > FT2232_BUFFER_SIZE)");
1726 /* unsent commands before this */
1727 if (first_unsent
!= cmd
)
1728 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1729 retval
= ERROR_JTAG_QUEUE_FAILED
;
1731 /* current command */
1732 ft2232_end_state(cmd
->cmd
.scan
->end_state
);
1733 ft2232_large_scan(cmd
->cmd
.scan
, type
, buffer
, scan_size
);
1735 first_unsent
= cmd
->next
;
1740 else if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
)
1742 LOG_DEBUG("ft2232 buffer size reached, sending queued commands (first_unsent: %p, cmd: %p)",
1745 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1746 retval
= ERROR_JTAG_QUEUE_FAILED
;
1750 ft2232_expect_read
+= ft2232_predict_scan_in(scan_size
, type
);
1751 /* LOG_DEBUG("new read size: %i", ft2232_expect_read); */
1752 ft2232_end_state(cmd
->cmd
.scan
->end_state
);
1753 ft2232_add_scan(cmd
->cmd
.scan
->ir_scan
, type
, buffer
, scan_size
);
1757 DEBUG_JTAG_IO("%s scan, %i bits, end in %s",
1758 (cmd
->cmd
.scan
->ir_scan
) ? "IR" : "DR", scan_size
,
1759 tap_state_name(tap_get_end_state()));
1764 static int ft2232_execute_reset(struct jtag_command
*cmd
)
1767 int predicted_size
= 0;
1770 DEBUG_JTAG_IO("reset trst: %i srst %i",
1771 cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
1773 /* only send the maximum buffer size that FT2232C can handle */
1775 if (ft2232_buffer_size
+ predicted_size
+ 1 > FT2232_BUFFER_SIZE
)
1777 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1778 retval
= ERROR_JTAG_QUEUE_FAILED
;
1783 if ((cmd
->cmd
.reset
->trst
== 1) || (cmd
->cmd
.reset
->srst
&& (jtag_get_reset_config() & RESET_SRST_PULLS_TRST
)))
1785 tap_set_state(TAP_RESET
);
1788 layout
->reset(cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
1791 DEBUG_JTAG_IO("trst: %i, srst: %i",
1792 cmd
->cmd
.reset
->trst
, cmd
->cmd
.reset
->srst
);
1796 static int ft2232_execute_sleep(struct jtag_command
*cmd
)
1801 DEBUG_JTAG_IO("sleep %" PRIi32
, cmd
->cmd
.sleep
->us
);
1803 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1804 retval
= ERROR_JTAG_QUEUE_FAILED
;
1805 first_unsent
= cmd
->next
;
1806 jtag_sleep(cmd
->cmd
.sleep
->us
);
1807 DEBUG_JTAG_IO("sleep %" PRIi32
" usec while in %s",
1809 tap_state_name(tap_get_state()));
1813 static int ft2232_execute_stableclocks(struct jtag_command
*cmd
)
1818 /* this is only allowed while in a stable state. A check for a stable
1819 * state was done in jtag_add_clocks()
1821 if (ft2232_stableclocks(cmd
->cmd
.stableclocks
->num_cycles
, cmd
) != ERROR_OK
)
1822 retval
= ERROR_JTAG_QUEUE_FAILED
;
1823 DEBUG_JTAG_IO("clocks %i while in %s",
1824 cmd
->cmd
.stableclocks
->num_cycles
,
1825 tap_state_name(tap_get_state()));
1829 static int ft2232_execute_command(struct jtag_command
*cmd
)
1836 case JTAG_RESET
: retval
= ft2232_execute_reset(cmd
); break;
1837 case JTAG_RUNTEST
: retval
= ft2232_execute_runtest(cmd
); break;
1838 case JTAG_STATEMOVE
: retval
= ft2232_execute_statemove(cmd
); break;
1839 case JTAG_PATHMOVE
: retval
= ft2232_execute_pathmove(cmd
); break;
1840 case JTAG_SCAN
: retval
= ft2232_execute_scan(cmd
); break;
1841 case JTAG_SLEEP
: retval
= ft2232_execute_sleep(cmd
); break;
1842 case JTAG_STABLECLOCKS
: retval
= ft2232_execute_stableclocks(cmd
); break;
1844 LOG_ERROR("BUG: unknown JTAG command type encountered");
1850 static int ft2232_execute_queue(void)
1852 struct jtag_command
* cmd
= jtag_command_queue
; /* currently processed command */
1855 first_unsent
= cmd
; /* next command that has to be sent */
1858 /* return ERROR_OK, unless ft2232_send_and_recv reports a failed check
1859 * that wasn't handled by a caller-provided error handler
1863 ft2232_buffer_size
= 0;
1864 ft2232_expect_read
= 0;
1866 /* blink, if the current layout has that feature */
1872 if (ft2232_execute_command(cmd
) != ERROR_OK
)
1873 retval
= ERROR_JTAG_QUEUE_FAILED
;
1874 /* Start reading input before FT2232 TX buffer fills up */
1876 if (ft2232_expect_read
> 256)
1878 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1879 retval
= ERROR_JTAG_QUEUE_FAILED
;
1884 if (require_send
> 0)
1885 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
1886 retval
= ERROR_JTAG_QUEUE_FAILED
;
1891 #if BUILD_FT2232_FTD2XX == 1
1892 static int ft2232_init_ftd2xx(uint16_t vid
, uint16_t pid
, int more
, int* try_more
)
1896 char SerialNumber
[16];
1897 char Description
[64];
1898 DWORD openex_flags
= 0;
1899 char* openex_string
= NULL
;
1900 uint8_t latency_timer
;
1902 LOG_DEBUG("'ft2232' interface using FTD2XX with '%s' layout (%4.4x:%4.4x)", ft2232_layout
, vid
, pid
);
1905 /* Add non-standard Vid/Pid to the linux driver */
1906 if ((status
= FT_SetVIDPID(vid
, pid
)) != FT_OK
)
1908 LOG_WARNING("couldn't add %4.4x:%4.4x", vid
, pid
);
1912 if (ft2232_device_desc
&& ft2232_serial
)
1914 LOG_WARNING("can't open by device description and serial number, giving precedence to serial");
1915 ft2232_device_desc
= NULL
;
1918 if (ft2232_device_desc
)
1920 openex_string
= ft2232_device_desc
;
1921 openex_flags
= FT_OPEN_BY_DESCRIPTION
;
1923 else if (ft2232_serial
)
1925 openex_string
= ft2232_serial
;
1926 openex_flags
= FT_OPEN_BY_SERIAL_NUMBER
;
1930 LOG_ERROR("neither device description nor serial number specified");
1931 LOG_ERROR("please add \"ft2232_device_desc <string>\" or \"ft2232_serial <string>\" to your .cfg file");
1933 return ERROR_JTAG_INIT_FAILED
;
1936 status
= FT_OpenEx(openex_string
, openex_flags
, &ftdih
);
1937 if (status
!= FT_OK
) {
1938 /* under Win32, the FTD2XX driver appends an "A" to the end
1939 * of the description, if we tried by the desc, then
1940 * try by the alternate "A" description. */
1941 if (openex_string
== ft2232_device_desc
) {
1942 /* Try the alternate method. */
1943 openex_string
= ft2232_device_desc_A
;
1944 status
= FT_OpenEx(openex_string
, openex_flags
, &ftdih
);
1945 if (status
== FT_OK
) {
1946 /* yea, the "alternate" method worked! */
1948 /* drat, give the user a meaningfull message.
1949 * telling the use we tried *BOTH* methods. */
1950 LOG_WARNING("Unable to open FTDI Device tried: '%s' and '%s'\n",
1952 ft2232_device_desc_A
);
1957 if (status
!= FT_OK
)
1963 LOG_WARNING("unable to open ftdi device (trying more): %lu", status
);
1965 return ERROR_JTAG_INIT_FAILED
;
1967 LOG_ERROR("unable to open ftdi device: %lu", status
);
1968 status
= FT_ListDevices(&num_devices
, NULL
, FT_LIST_NUMBER_ONLY
);
1969 if (status
== FT_OK
)
1971 char** desc_array
= malloc(sizeof(char*) * (num_devices
+ 1));
1974 for (i
= 0; i
< num_devices
; i
++)
1975 desc_array
[i
] = malloc(64);
1977 desc_array
[num_devices
] = NULL
;
1979 status
= FT_ListDevices(desc_array
, &num_devices
, FT_LIST_ALL
| openex_flags
);
1981 if (status
== FT_OK
)
1983 LOG_ERROR("ListDevices: %lu\n", num_devices
);
1984 for (i
= 0; i
< num_devices
; i
++)
1985 LOG_ERROR("%" PRIu32
": \"%s\"", i
, desc_array
[i
]);
1988 for (i
= 0; i
< num_devices
; i
++)
1989 free(desc_array
[i
]);
1995 LOG_ERROR("ListDevices: NONE\n");
1997 return ERROR_JTAG_INIT_FAILED
;
2000 if ((status
= FT_SetLatencyTimer(ftdih
, ft2232_latency
)) != FT_OK
)
2002 LOG_ERROR("unable to set latency timer: %lu", status
);
2003 return ERROR_JTAG_INIT_FAILED
;
2006 if ((status
= FT_GetLatencyTimer(ftdih
, &latency_timer
)) != FT_OK
)
2008 LOG_ERROR("unable to get latency timer: %lu", status
);
2009 return ERROR_JTAG_INIT_FAILED
;
2013 LOG_DEBUG("current latency timer: %i", latency_timer
);
2016 if ((status
= FT_SetTimeouts(ftdih
, 5000, 5000)) != FT_OK
)
2018 LOG_ERROR("unable to set timeouts: %lu", status
);
2019 return ERROR_JTAG_INIT_FAILED
;
2022 if ((status
= FT_SetBitMode(ftdih
, 0x0b, 2)) != FT_OK
)
2024 LOG_ERROR("unable to enable bit i/o mode: %lu", status
);
2025 return ERROR_JTAG_INIT_FAILED
;
2028 if ((status
= FT_GetDeviceInfo(ftdih
, &ftdi_device
, &deviceID
, SerialNumber
, Description
, NULL
)) != FT_OK
)
2030 LOG_ERROR("unable to get FT_GetDeviceInfo: %lu", status
);
2031 return ERROR_JTAG_INIT_FAILED
;
2035 static const char* type_str
[] =
2036 {"BM", "AM", "100AX", "UNKNOWN", "2232C", "232R", "2232H", "4232H"};
2037 unsigned no_of_known_types
= ARRAY_SIZE(type_str
) - 1;
2038 unsigned type_index
= ((unsigned)ftdi_device
<= no_of_known_types
)
2039 ? ftdi_device
: FT_DEVICE_UNKNOWN
;
2040 LOG_INFO("device: %lu \"%s\"", ftdi_device
, type_str
[type_index
]);
2041 LOG_INFO("deviceID: %lu", deviceID
);
2042 LOG_INFO("SerialNumber: %s", SerialNumber
);
2043 LOG_INFO("Description: %s", Description
);
2049 static int ft2232_purge_ftd2xx(void)
2053 if ((status
= FT_Purge(ftdih
, FT_PURGE_RX
| FT_PURGE_TX
)) != FT_OK
)
2055 LOG_ERROR("error purging ftd2xx device: %lu", status
);
2056 return ERROR_JTAG_INIT_FAILED
;
2062 #endif /* BUILD_FT2232_FTD2XX == 1 */
2064 #if BUILD_FT2232_LIBFTDI == 1
2065 static int ft2232_init_libftdi(uint16_t vid
, uint16_t pid
, int more
, int* try_more
)
2067 uint8_t latency_timer
;
2069 LOG_DEBUG("'ft2232' interface using libftdi with '%s' layout (%4.4x:%4.4x)",
2070 ft2232_layout
, vid
, pid
);
2072 if (ftdi_init(&ftdic
) < 0)
2073 return ERROR_JTAG_INIT_FAILED
;
2075 if (ftdi_set_interface(&ftdic
, INTERFACE_A
) < 0)
2077 LOG_ERROR("unable to select FT2232 channel A: %s", ftdic
.error_str
);
2078 return ERROR_JTAG_INIT_FAILED
;
2081 /* context, vendor id, product id */
2082 if (ftdi_usb_open_desc(&ftdic
, vid
, pid
, ft2232_device_desc
,
2086 LOG_WARNING("unable to open ftdi device (trying more): %s",
2089 LOG_ERROR("unable to open ftdi device: %s", ftdic
.error_str
);
2091 return ERROR_JTAG_INIT_FAILED
;
2094 /* There is already a reset in ftdi_usb_open_desc, this should be redundant */
2095 if (ftdi_usb_reset(&ftdic
) < 0)
2097 LOG_ERROR("unable to reset ftdi device");
2098 return ERROR_JTAG_INIT_FAILED
;
2101 if (ftdi_set_latency_timer(&ftdic
, ft2232_latency
) < 0)
2103 LOG_ERROR("unable to set latency timer");
2104 return ERROR_JTAG_INIT_FAILED
;
2107 if (ftdi_get_latency_timer(&ftdic
, &latency_timer
) < 0)
2109 LOG_ERROR("unable to get latency timer");
2110 return ERROR_JTAG_INIT_FAILED
;
2114 LOG_DEBUG("current latency timer: %i", latency_timer
);
2117 ftdi_set_bitmode(&ftdic
, 0x0b, 2); /* ctx, JTAG I/O mask */
2119 ftdi_device
= ftdic
.type
;
2120 static const char* type_str
[] =
2121 {"AM", "BM", "2232C", "R", "2232H", "4232H", "Unknown"};
2122 unsigned no_of_known_types
= ARRAY_SIZE(type_str
) - 1;
2123 unsigned type_index
= ((unsigned)ftdi_device
< no_of_known_types
)
2124 ? ftdi_device
: no_of_known_types
;
2125 LOG_DEBUG("FTDI chip type: %i \"%s\"", (int)ftdi_device
, type_str
[type_index
]);
2129 static int ft2232_purge_libftdi(void)
2131 if (ftdi_usb_purge_buffers(&ftdic
) < 0)
2133 LOG_ERROR("ftdi_purge_buffers: %s", ftdic
.error_str
);
2134 return ERROR_JTAG_INIT_FAILED
;
2140 #endif /* BUILD_FT2232_LIBFTDI == 1 */
2142 static int ft2232_init(void)
2146 uint32_t bytes_written
;
2147 const struct ft2232_layout
* cur_layout
= ft2232_layouts
;
2150 if (tap_get_tms_path_len(TAP_IRPAUSE
,TAP_IRPAUSE
) == 7)
2152 LOG_DEBUG("ft2232 interface using 7 step jtag state transitions");
2156 LOG_DEBUG("ft2232 interface using shortest path jtag state transitions");
2159 if ((ft2232_layout
== NULL
) || (ft2232_layout
[0] == 0))
2161 ft2232_layout
= "usbjtag";
2162 LOG_WARNING("No ft2232 layout specified, using default 'usbjtag'");
2165 while (cur_layout
->name
)
2167 if (strcmp(cur_layout
->name
, ft2232_layout
) == 0)
2169 layout
= cur_layout
;
2177 LOG_ERROR("No matching layout found for %s", ft2232_layout
);
2178 return ERROR_JTAG_INIT_FAILED
;
2184 * "more indicates that there are more IDs to try, so we should
2185 * not print an error for an ID mismatch (but for anything
2188 * try_more indicates that the error code returned indicates an
2189 * ID mismatch (and nothing else) and that we should proceeed
2190 * with the next ID pair.
2192 int more
= ft2232_vid
[i
+ 1] || ft2232_pid
[i
+ 1];
2195 #if BUILD_FT2232_FTD2XX == 1
2196 retval
= ft2232_init_ftd2xx(ft2232_vid
[i
], ft2232_pid
[i
],
2198 #elif BUILD_FT2232_LIBFTDI == 1
2199 retval
= ft2232_init_libftdi(ft2232_vid
[i
], ft2232_pid
[i
],
2204 if (!more
|| !try_more
)
2208 ft2232_buffer_size
= 0;
2209 ft2232_buffer
= malloc(FT2232_BUFFER_SIZE
);
2211 if (layout
->init() != ERROR_OK
)
2212 return ERROR_JTAG_INIT_FAILED
;
2214 if (ft2232_device_is_highspeed())
2216 #ifndef BUILD_FT2232_HIGHSPEED
2217 #if BUILD_FT2232_FTD2XX == 1
2218 LOG_WARNING("High Speed device found - You need a newer FTD2XX driver (version 2.04.16 or later)");
2219 #elif BUILD_FT2232_LIBFTDI == 1
2220 LOG_WARNING("High Speed device found - You need a newer libftdi version (0.16 or later)");
2223 /* make sure the legacy mode is disabled */
2224 if (ft2232h_ft4232h_clk_divide_by_5(false) != ERROR_OK
)
2225 return ERROR_JTAG_INIT_FAILED
;
2228 ft2232_speed(jtag_get_speed());
2230 buf
[0] = 0x85; /* Disconnect TDI/DO to TDO/DI for Loopback */
2231 if (((retval
= ft2232_write(buf
, 1, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 1))
2233 LOG_ERROR("couldn't write to FT2232 to disable loopback");
2234 return ERROR_JTAG_INIT_FAILED
;
2237 #if BUILD_FT2232_FTD2XX == 1
2238 return ft2232_purge_ftd2xx();
2239 #elif BUILD_FT2232_LIBFTDI == 1
2240 return ft2232_purge_libftdi();
2246 static int usbjtag_init(void)
2249 uint32_t bytes_written
;
2252 low_direction
= 0x0b;
2254 if (strcmp(ft2232_layout
, "usbjtag") == 0)
2261 else if (strcmp(ft2232_layout
, "signalyzer") == 0)
2268 else if (strcmp(ft2232_layout
, "evb_lm3s811") == 0)
2270 /* There are multiple revisions of LM3S811 eval boards:
2271 * - Rev B (and older?) boards have no SWO trace support.
2272 * - Rev C boards add ADBUS_6 DBG_ENn and BDBUS_4 SWO_EN;
2273 * they should use the "luminary_icdi" layout instead.
2280 low_direction
= 0x8b;
2282 else if (strcmp(ft2232_layout
, "luminary_icdi") == 0)
2284 /* Most Luminary eval boards support SWO trace output,
2285 * and should use this "luminary_icdi" layout.
2292 low_direction
= 0xcb;
2296 LOG_ERROR("BUG: usbjtag_init called for unknown layout '%s'", ft2232_layout
);
2297 return ERROR_JTAG_INIT_FAILED
;
2300 enum reset_types jtag_reset_config
= jtag_get_reset_config();
2301 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
2303 low_direction
&= ~nTRSTnOE
; /* nTRST input */
2304 low_output
&= ~nTRST
; /* nTRST = 0 */
2308 low_direction
|= nTRSTnOE
; /* nTRST output */
2309 low_output
|= nTRST
; /* nTRST = 1 */
2312 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2314 low_direction
|= nSRSTnOE
; /* nSRST output */
2315 low_output
|= nSRST
; /* nSRST = 1 */
2319 low_direction
&= ~nSRSTnOE
; /* nSRST input */
2320 low_output
&= ~nSRST
; /* nSRST = 0 */
2323 /* initialize low byte for jtag */
2324 buf
[0] = 0x80; /* command "set data bits low byte" */
2325 buf
[1] = low_output
; /* value (TMS = 1,TCK = 0, TDI = 0, xRST high) */
2326 buf
[2] = low_direction
; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in */
2327 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2329 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2331 LOG_ERROR("couldn't initialize FT2232 with 'USBJTAG' layout");
2332 return ERROR_JTAG_INIT_FAILED
;
2338 static int axm0432_jtag_init(void)
2341 uint32_t bytes_written
;
2344 low_direction
= 0x2b;
2346 /* initialize low byte for jtag */
2347 buf
[0] = 0x80; /* command "set data bits low byte" */
2348 buf
[1] = low_output
; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
2349 buf
[2] = low_direction
; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
2350 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2352 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2354 LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
2355 return ERROR_JTAG_INIT_FAILED
;
2358 if (strcmp(layout
->name
, "axm0432_jtag") == 0)
2361 nTRSTnOE
= 0x0; /* No output enable for TRST*/
2363 nSRSTnOE
= 0x0; /* No output enable for SRST*/
2367 LOG_ERROR("BUG: axm0432_jtag_init called for non axm0432 layout");
2372 high_direction
= 0x0c;
2374 enum reset_types jtag_reset_config
= jtag_get_reset_config();
2375 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
2377 LOG_ERROR("can't set nTRSTOE to push-pull on the Dicarlo jtag");
2381 high_output
|= nTRST
;
2384 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2386 LOG_ERROR("can't set nSRST to push-pull on the Dicarlo jtag");
2390 high_output
|= nSRST
;
2393 /* initialize high port */
2394 buf
[0] = 0x82; /* command "set data bits high byte" */
2395 buf
[1] = high_output
; /* value */
2396 buf
[2] = high_direction
; /* all outputs (xRST and xRSTnOE) */
2397 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2399 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2401 LOG_ERROR("couldn't initialize FT2232 with 'Dicarlo' layout");
2402 return ERROR_JTAG_INIT_FAILED
;
2408 static int jtagkey_init(void)
2411 uint32_t bytes_written
;
2414 low_direction
= 0x1b;
2416 /* initialize low byte for jtag */
2417 buf
[0] = 0x80; /* command "set data bits low byte" */
2418 buf
[1] = low_output
; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
2419 buf
[2] = low_direction
; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
2420 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2422 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2424 LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
2425 return ERROR_JTAG_INIT_FAILED
;
2428 if (strcmp(layout
->name
, "jtagkey") == 0)
2435 else if ((strcmp(layout
->name
, "jtagkey_prototype_v1") == 0)
2436 || (strcmp(layout
->name
, "oocdlink") == 0))
2445 LOG_ERROR("BUG: jtagkey_init called for non jtagkey layout");
2450 high_direction
= 0x0f;
2452 enum reset_types jtag_reset_config
= jtag_get_reset_config();
2453 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
2455 high_output
|= nTRSTnOE
;
2456 high_output
&= ~nTRST
;
2460 high_output
&= ~nTRSTnOE
;
2461 high_output
|= nTRST
;
2464 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2466 high_output
&= ~nSRSTnOE
;
2467 high_output
|= nSRST
;
2471 high_output
|= nSRSTnOE
;
2472 high_output
&= ~nSRST
;
2475 /* initialize high port */
2476 buf
[0] = 0x82; /* command "set data bits high byte" */
2477 buf
[1] = high_output
; /* value */
2478 buf
[2] = high_direction
; /* all outputs (xRST and xRSTnOE) */
2479 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2481 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2483 LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
2484 return ERROR_JTAG_INIT_FAILED
;
2490 static int olimex_jtag_init(void)
2493 uint32_t bytes_written
;
2496 low_direction
= 0x1b;
2498 /* initialize low byte for jtag */
2499 buf
[0] = 0x80; /* command "set data bits low byte" */
2500 buf
[1] = low_output
; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
2501 buf
[2] = low_direction
; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
2502 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2504 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2506 LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
2507 return ERROR_JTAG_INIT_FAILED
;
2513 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2516 high_direction
= 0x0f;
2518 enum reset_types jtag_reset_config
= jtag_get_reset_config();
2519 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
2521 high_output
|= nTRSTnOE
;
2522 high_output
&= ~nTRST
;
2526 high_output
&= ~nTRSTnOE
;
2527 high_output
|= nTRST
;
2530 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
2532 LOG_ERROR("can't set nSRST to push-pull on the Olimex ARM-USB-OCD");
2536 high_output
&= ~nSRST
;
2539 /* turn red LED on */
2540 high_output
|= 0x08;
2542 /* initialize high port */
2543 buf
[0] = 0x82; /* command "set data bits high byte" */
2544 buf
[1] = high_output
; /* value */
2545 buf
[2] = high_direction
; /* all outputs (xRST and xRSTnOE) */
2546 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2548 if ((ft2232_write(buf
, 3, &bytes_written
) != ERROR_OK
) || (bytes_written
!= 3))
2550 LOG_ERROR("couldn't initialize FT2232 with 'Olimex' layout");
2551 return ERROR_JTAG_INIT_FAILED
;
2557 static int flyswatter_init(void)
2560 uint32_t bytes_written
;
2563 low_direction
= 0xfb;
2565 /* initialize low byte for jtag */
2566 buf
[0] = 0x80; /* command "set data bits low byte" */
2567 buf
[1] = low_output
; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
2568 buf
[2] = low_direction
; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE[12]=out, n[ST]srst = out */
2569 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2571 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2573 LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
2574 return ERROR_JTAG_INIT_FAILED
;
2578 nTRSTnOE
= 0x0; /* not output enable for nTRST */
2580 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2583 high_direction
= 0x0c;
2585 /* turn red LED3 on, LED2 off */
2586 high_output
|= 0x08;
2588 /* initialize high port */
2589 buf
[0] = 0x82; /* command "set data bits high byte" */
2590 buf
[1] = high_output
; /* value */
2591 buf
[2] = high_direction
; /* all outputs (xRST and xRSTnOE) */
2592 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2594 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2596 LOG_ERROR("couldn't initialize FT2232 with 'flyswatter' layout");
2597 return ERROR_JTAG_INIT_FAILED
;
2603 static int turtle_init(void)
2606 uint32_t bytes_written
;
2609 low_direction
= 0x5b;
2611 /* initialize low byte for jtag */
2612 buf
[0] = 0x80; /* command "set data bits low byte" */
2613 buf
[1] = low_output
; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
2614 buf
[2] = low_direction
; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
2615 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2617 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2619 LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
2620 return ERROR_JTAG_INIT_FAILED
;
2626 high_direction
= 0x0C;
2628 /* initialize high port */
2629 buf
[0] = 0x82; /* command "set data bits high byte" */
2630 buf
[1] = high_output
;
2631 buf
[2] = high_direction
;
2632 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2634 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2636 LOG_ERROR("couldn't initialize FT2232 with 'turtelizer2' layout");
2637 return ERROR_JTAG_INIT_FAILED
;
2643 static int comstick_init(void)
2646 uint32_t bytes_written
;
2649 low_direction
= 0x0b;
2651 /* initialize low byte for jtag */
2652 buf
[0] = 0x80; /* command "set data bits low byte" */
2653 buf
[1] = low_output
; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
2654 buf
[2] = low_direction
; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
2655 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2657 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2659 LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
2660 return ERROR_JTAG_INIT_FAILED
;
2664 nTRSTnOE
= 0x00; /* no output enable for nTRST */
2666 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2669 high_direction
= 0x03;
2671 /* initialize high port */
2672 buf
[0] = 0x82; /* command "set data bits high byte" */
2673 buf
[1] = high_output
;
2674 buf
[2] = high_direction
;
2675 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2677 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2679 LOG_ERROR("couldn't initialize FT2232 with 'comstick' layout");
2680 return ERROR_JTAG_INIT_FAILED
;
2686 static int stm32stick_init(void)
2689 uint32_t bytes_written
;
2692 low_direction
= 0x8b;
2694 /* initialize low byte for jtag */
2695 buf
[0] = 0x80; /* command "set data bits low byte" */
2696 buf
[1] = low_output
; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
2697 buf
[2] = low_direction
; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
2698 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2700 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2702 LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
2703 return ERROR_JTAG_INIT_FAILED
;
2707 nTRSTnOE
= 0x00; /* no output enable for nTRST */
2709 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2712 high_direction
= 0x03;
2714 /* initialize high port */
2715 buf
[0] = 0x82; /* command "set data bits high byte" */
2716 buf
[1] = high_output
;
2717 buf
[2] = high_direction
;
2718 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2720 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2722 LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
2723 return ERROR_JTAG_INIT_FAILED
;
2729 static int sheevaplug_init(void)
2732 uint32_t bytes_written
;
2735 low_direction
= 0x1b;
2737 /* initialize low byte for jtag */
2738 buf
[0] = 0x80; /* command "set data bits low byte" */
2739 buf
[1] = low_output
; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
2740 buf
[2] = low_direction
; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in */
2741 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2743 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2745 LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
2746 return ERROR_JTAG_INIT_FAILED
;
2755 high_direction
= 0x0f;
2757 /* nTRST is always push-pull */
2758 high_output
&= ~nTRSTnOE
;
2759 high_output
|= nTRST
;
2761 /* nSRST is always open-drain */
2762 high_output
|= nSRSTnOE
;
2763 high_output
&= ~nSRST
;
2765 /* initialize high port */
2766 buf
[0] = 0x82; /* command "set data bits high byte" */
2767 buf
[1] = high_output
; /* value */
2768 buf
[2] = high_direction
; /* all outputs - xRST */
2769 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2771 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2773 LOG_ERROR("couldn't initialize FT2232 with 'sheevaplug' layout");
2774 return ERROR_JTAG_INIT_FAILED
;
2780 static int cortino_jtag_init(void)
2783 uint32_t bytes_written
;
2786 low_direction
= 0x1b;
2788 /* initialize low byte for jtag */
2789 buf
[0] = 0x80; /* command "set data bits low byte" */
2790 buf
[1] = low_output
; /* value (TMS = 1,TCK = 0, TDI = 0, nOE = 0) */
2791 buf
[2] = low_direction
; /* dir (output = 1), TCK/TDI/TMS = out, TDO = in, nOE = out */
2792 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2794 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2796 LOG_ERROR("couldn't initialize FT2232 with 'cortino' layout");
2797 return ERROR_JTAG_INIT_FAILED
;
2801 nTRSTnOE
= 0x00; /* no output enable for nTRST */
2803 nSRSTnOE
= 0x00; /* no output enable for nSRST */
2806 high_direction
= 0x03;
2808 /* initialize high port */
2809 buf
[0] = 0x82; /* command "set data bits high byte" */
2810 buf
[1] = high_output
;
2811 buf
[2] = high_direction
;
2812 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
2814 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
2816 LOG_ERROR("couldn't initialize FT2232 with 'stm32stick' layout");
2817 return ERROR_JTAG_INIT_FAILED
;
2823 static void olimex_jtag_blink(void)
2825 /* Olimex ARM-USB-OCD has a LED connected to ACBUS3
2826 * ACBUS3 is bit 3 of the GPIOH port
2828 if (high_output
& 0x08)
2830 /* set port pin high */
2831 high_output
&= 0x07;
2835 /* set port pin low */
2836 high_output
|= 0x08;
2840 buffer_write(high_output
);
2841 buffer_write(high_direction
);
2844 static void flyswatter_jtag_blink(void)
2847 * Flyswatter has two LEDs connected to ACBUS2 and ACBUS3
2849 high_output
^= 0x0c;
2852 buffer_write(high_output
);
2853 buffer_write(high_direction
);
2856 static void turtle_jtag_blink(void)
2859 * Turtelizer2 has two LEDs connected to ACBUS2 and ACBUS3
2861 if (high_output
& 0x08)
2871 buffer_write(high_output
);
2872 buffer_write(high_direction
);
2875 static int ft2232_quit(void)
2877 #if BUILD_FT2232_FTD2XX == 1
2880 status
= FT_Close(ftdih
);
2881 #elif BUILD_FT2232_LIBFTDI == 1
2882 ftdi_usb_close(&ftdic
);
2884 ftdi_deinit(&ftdic
);
2887 free(ft2232_buffer
);
2888 ft2232_buffer
= NULL
;
2893 COMMAND_HANDLER(ft2232_handle_device_desc_command
)
2899 ft2232_device_desc
= strdup(CMD_ARGV
[0]);
2900 cp
= strchr(ft2232_device_desc
, 0);
2901 /* under Win32, the FTD2XX driver appends an "A" to the end
2902 * of the description, this examines the given desc
2903 * and creates the 'missing' _A or non_A variable. */
2904 if ((cp
[-1] == 'A') && (cp
[-2]==' ')) {
2905 /* it was, so make this the "A" version. */
2906 ft2232_device_desc_A
= ft2232_device_desc
;
2907 /* and *CREATE* the non-A version. */
2908 strcpy(buf
, ft2232_device_desc
);
2909 cp
= strchr(buf
, 0);
2911 ft2232_device_desc
= strdup(buf
);
2913 /* <space > A not defined
2915 sprintf(buf
, "%s A", ft2232_device_desc
);
2916 ft2232_device_desc_A
= strdup(buf
);
2921 LOG_ERROR("expected exactly one argument to ft2232_device_desc <description>");
2927 COMMAND_HANDLER(ft2232_handle_serial_command
)
2931 ft2232_serial
= strdup(CMD_ARGV
[0]);
2935 LOG_ERROR("expected exactly one argument to ft2232_serial <serial-number>");
2941 COMMAND_HANDLER(ft2232_handle_layout_command
)
2946 ft2232_layout
= malloc(strlen(CMD_ARGV
[0]) + 1);
2947 strcpy(ft2232_layout
, CMD_ARGV
[0]);
2952 COMMAND_HANDLER(ft2232_handle_vid_pid_command
)
2954 if (CMD_ARGC
> MAX_USB_IDS
* 2)
2956 LOG_WARNING("ignoring extra IDs in ft2232_vid_pid "
2957 "(maximum is %d pairs)", MAX_USB_IDS
);
2958 CMD_ARGC
= MAX_USB_IDS
* 2;
2960 if (CMD_ARGC
< 2 || (CMD_ARGC
& 1))
2962 LOG_WARNING("incomplete ft2232_vid_pid configuration directive");
2964 return ERROR_COMMAND_SYNTAX_ERROR
;
2965 /* remove the incomplete trailing id */
2970 for (i
= 0; i
< CMD_ARGC
; i
+= 2)
2972 COMMAND_PARSE_NUMBER(u16
, CMD_ARGV
[i
], ft2232_vid
[i
>> 1]);
2973 COMMAND_PARSE_NUMBER(u16
, CMD_ARGV
[i
+ 1], ft2232_pid
[i
>> 1]);
2977 * Explicitly terminate, in case there are multiples instances of
2980 ft2232_vid
[i
>> 1] = ft2232_pid
[i
>> 1] = 0;
2985 COMMAND_HANDLER(ft2232_handle_latency_command
)
2989 ft2232_latency
= atoi(CMD_ARGV
[0]);
2993 LOG_ERROR("expected exactly one argument to ft2232_latency <ms>");
2999 static int ft2232_stableclocks(int num_cycles
, struct jtag_command
* cmd
)
3003 /* 7 bits of either ones or zeros. */
3004 uint8_t tms
= (tap_get_state() == TAP_RESET
? 0x7F : 0x00);
3006 while (num_cycles
> 0)
3008 /* the command 0x4b, "Clock Data to TMS/CS Pin (no Read)" handles
3009 * at most 7 bits per invocation. Here we invoke it potentially
3012 int bitcount_per_command
= (num_cycles
> 7) ? 7 : num_cycles
;
3014 if (ft2232_buffer_size
+ 3 >= FT2232_BUFFER_SIZE
)
3016 if (ft2232_send_and_recv(first_unsent
, cmd
) != ERROR_OK
)
3017 retval
= ERROR_JTAG_QUEUE_FAILED
;
3022 /* there are no state transitions in this code, so omit state tracking */
3024 /* command "Clock Data to TMS/CS Pin (no Read)" */
3028 buffer_write(bitcount_per_command
- 1);
3030 /* TMS data bits are either all zeros or ones to stay in the current stable state */
3035 num_cycles
-= bitcount_per_command
;
3041 /* ---------------------------------------------------------------------
3042 * Support for IceBear JTAG adapter from Section5:
3043 * http://section5.ch/icebear
3045 * Author: Sten, debian@sansys-electronic.com
3048 /* Icebear pin layout
3050 * ADBUS5 (nEMU) nSRST | 2 1| GND (10k->VCC)
3051 * GND GND | 4 3| n.c.
3052 * ADBUS3 TMS | 6 5| ADBUS6 VCC
3053 * ADBUS0 TCK | 8 7| ADBUS7 (GND)
3054 * ADBUS4 nTRST |10 9| ACBUS0 (GND)
3055 * ADBUS1 TDI |12 11| ACBUS1 (GND)
3056 * ADBUS2 TDO |14 13| GND GND
3058 * ADBUS0 O L TCK ACBUS0 GND
3059 * ADBUS1 O L TDI ACBUS1 GND
3060 * ADBUS2 I TDO ACBUS2 n.c.
3061 * ADBUS3 O H TMS ACBUS3 n.c.
3067 static int icebear_jtag_init(void) {
3069 uint32_t bytes_written
;
3071 low_direction
= 0x0b; /* output: TCK TDI TMS; input: TDO */
3072 low_output
= 0x08; /* high: TMS; low: TCK TDI */
3076 enum reset_types jtag_reset_config
= jtag_get_reset_config();
3077 if ((jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) != 0) {
3078 low_direction
&= ~nTRST
; /* nTRST high impedance */
3081 low_direction
|= nTRST
;
3082 low_output
|= nTRST
;
3085 low_direction
|= nSRST
;
3086 low_output
|= nSRST
;
3088 /* initialize low byte for jtag */
3089 buf
[0] = 0x80; /* command "set data bits low byte" */
3090 buf
[1] = low_output
;
3091 buf
[2] = low_direction
;
3092 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
3094 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3)) {
3095 LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (low)");
3096 return ERROR_JTAG_INIT_FAILED
;
3100 high_direction
= 0x00;
3103 /* initialize high port */
3104 buf
[0] = 0x82; /* command "set data bits high byte" */
3105 buf
[1] = high_output
; /* value */
3106 buf
[2] = high_direction
; /* all outputs (xRST and xRSTnOE) */
3107 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
3109 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3)) {
3110 LOG_ERROR("couldn't initialize FT2232 with 'IceBear' layout (high)");
3111 return ERROR_JTAG_INIT_FAILED
;
3117 static void icebear_jtag_reset(int trst
, int srst
) {
3120 low_direction
|= nTRST
;
3121 low_output
&= ~nTRST
;
3123 else if (trst
== 0) {
3124 enum reset_types jtag_reset_config
= jtag_get_reset_config();
3125 if ((jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) != 0)
3126 low_direction
&= ~nTRST
;
3128 low_output
|= nTRST
;
3132 low_output
&= ~nSRST
;
3134 else if (srst
== 0) {
3135 low_output
|= nSRST
;
3138 /* command "set data bits low byte" */
3140 buffer_write(low_output
);
3141 buffer_write(low_direction
);
3143 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, low_direction: 0x%2.2x", trst
, srst
, low_output
, low_direction
);
3146 /* ---------------------------------------------------------------------
3147 * Support for Signalyzer H2 and Signalyzer H4
3148 * JTAG adapter from Xverve Technologies Inc.
3149 * http://www.signalyzer.com or http://www.xverve.com
3151 * Author: Oleg Seiljus, oleg@signalyzer.com
3153 static unsigned char signalyzer_h_side
;
3154 static unsigned int signalyzer_h_adapter_type
;
3156 static int signalyzer_h_ctrl_write(int address
, unsigned short value
);
3158 #if BUILD_FT2232_FTD2XX == 1
3159 static int signalyzer_h_ctrl_read(int address
, unsigned short *value
);
3162 #define SIGNALYZER_COMMAND_ADDR 128
3163 #define SIGNALYZER_DATA_BUFFER_ADDR 129
3165 #define SIGNALYZER_COMMAND_VERSION 0x41
3166 #define SIGNALYZER_COMMAND_RESET 0x42
3167 #define SIGNALYZER_COMMAND_POWERCONTROL_GET 0x50
3168 #define SIGNALYZER_COMMAND_POWERCONTROL_SET 0x51
3169 #define SIGNALYZER_COMMAND_PWM_SET 0x52
3170 #define SIGNALYZER_COMMAND_LED_SET 0x53
3171 #define SIGNALYZER_COMMAND_ADC 0x54
3172 #define SIGNALYZER_COMMAND_GPIO_STATE 0x55
3173 #define SIGNALYZER_COMMAND_GPIO_MODE 0x56
3174 #define SIGNALYZER_COMMAND_GPIO_PORT 0x57
3175 #define SIGNALYZER_COMMAND_I2C 0x58
3177 #define SIGNALYZER_CHAN_A 1
3178 #define SIGNALYZER_CHAN_B 2
3179 /* LEDS use channel C */
3180 #define SIGNALYZER_CHAN_C 4
3182 #define SIGNALYZER_LED_GREEN 1
3183 #define SIGNALYZER_LED_RED 2
3185 #define SIGNALYZER_MODULE_TYPE_EM_LT16_A 0x0301
3186 #define SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG 0x0302
3187 #define SIGNALYZER_MODULE_TYPE_EM_JTAG 0x0303
3188 #define SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P 0x0304
3189 #define SIGNALYZER_MODULE_TYPE_EM_JTAG_P 0x0305
3192 static int signalyzer_h_ctrl_write(int address
, unsigned short value
)
3194 #if BUILD_FT2232_FTD2XX == 1
3195 return FT_WriteEE(ftdih
, address
, value
);
3196 #elif BUILD_FT2232_LIBFTDI == 1
3201 #if BUILD_FT2232_FTD2XX == 1
3202 static int signalyzer_h_ctrl_read(int address
, unsigned short *value
)
3204 return FT_ReadEE(ftdih
, address
, value
);
3208 static int signalyzer_h_led_set(unsigned char channel
, unsigned char led
,
3209 int on_time_ms
, int off_time_ms
, unsigned char cycles
)
3211 unsigned char on_time
;
3212 unsigned char off_time
;
3214 if (on_time_ms
< 0xFFFF)
3215 on_time
= (unsigned char)(on_time_ms
/ 62);
3219 off_time
= (unsigned char)(off_time_ms
/ 62);
3221 #if BUILD_FT2232_FTD2XX == 1
3224 if ((status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3225 ((uint32_t)(channel
<< 8) | led
))) != FT_OK
)
3227 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3228 return ERROR_JTAG_DEVICE_ERROR
;
3231 if ((status
= signalyzer_h_ctrl_write(
3232 (SIGNALYZER_DATA_BUFFER_ADDR
+ 1),
3233 ((uint32_t)(on_time
<< 8) | off_time
))) != FT_OK
)
3235 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3236 return ERROR_JTAG_DEVICE_ERROR
;
3239 if ((status
= signalyzer_h_ctrl_write(
3240 (SIGNALYZER_DATA_BUFFER_ADDR
+ 2),
3241 ((uint32_t)cycles
))) != FT_OK
)
3243 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3244 return ERROR_JTAG_DEVICE_ERROR
;
3247 if ((status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3248 SIGNALYZER_COMMAND_LED_SET
)) != FT_OK
)
3250 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3251 return ERROR_JTAG_DEVICE_ERROR
;
3255 #elif BUILD_FT2232_LIBFTDI == 1
3258 if ((retval
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3259 ((uint32_t)(channel
<< 8) | led
))) < 0)
3261 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3262 ftdi_get_error_string(&ftdic
));
3263 return ERROR_JTAG_DEVICE_ERROR
;
3266 if ((retval
= signalyzer_h_ctrl_write(
3267 (SIGNALYZER_DATA_BUFFER_ADDR
+ 1),
3268 ((uint32_t)(on_time
<< 8) | off_time
))) < 0)
3270 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3271 ftdi_get_error_string(&ftdic
));
3272 return ERROR_JTAG_DEVICE_ERROR
;
3275 if ((retval
= signalyzer_h_ctrl_write(
3276 (SIGNALYZER_DATA_BUFFER_ADDR
+ 2),
3277 (uint32_t)cycles
)) < 0)
3279 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3280 ftdi_get_error_string(&ftdic
));
3281 return ERROR_JTAG_DEVICE_ERROR
;
3284 if ((retval
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3285 SIGNALYZER_COMMAND_LED_SET
)) < 0)
3287 LOG_ERROR("signalyzer_h_ctrl_write returned: %s",
3288 ftdi_get_error_string(&ftdic
));
3289 return ERROR_JTAG_DEVICE_ERROR
;
3296 static int signalyzer_h_init(void)
3298 #if BUILD_FT2232_FTD2XX == 1
3305 uint16_t read_buf
[12] = { 0 };
3307 uint32_t bytes_written
;
3309 /* turn on center green led */
3310 signalyzer_h_led_set(SIGNALYZER_CHAN_C
, SIGNALYZER_LED_GREEN
,
3311 0xFFFF, 0x00, 0x00);
3313 /* determine what channel config wants to open
3314 * TODO: change me... current implementation is made to work
3315 * with openocd description parsing.
3317 end_of_desc
= strrchr(ft2232_device_desc
, 0x00);
3321 signalyzer_h_side
= *(end_of_desc
- 1);
3322 if (signalyzer_h_side
== 'B')
3323 signalyzer_h_side
= SIGNALYZER_CHAN_B
;
3325 signalyzer_h_side
= SIGNALYZER_CHAN_A
;
3329 LOG_ERROR("No Channel was specified");
3333 signalyzer_h_led_set(signalyzer_h_side
, SIGNALYZER_LED_GREEN
,
3336 #if BUILD_FT2232_FTD2XX == 1
3337 /* read signalyzer versionining information */
3338 if ((status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3339 SIGNALYZER_COMMAND_VERSION
)) != FT_OK
)
3341 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3342 return ERROR_JTAG_DEVICE_ERROR
;
3345 for (i
= 0; i
< 10; i
++)
3347 if ((status
= signalyzer_h_ctrl_read(
3348 (SIGNALYZER_DATA_BUFFER_ADDR
+ i
),
3349 &read_buf
[i
])) != FT_OK
)
3351 LOG_ERROR("signalyzer_h_ctrl_read returned: %lu",
3353 return ERROR_JTAG_DEVICE_ERROR
;
3357 LOG_INFO("Signalyzer: ID info: { %.4x %.4x %.4x %.4x %.4x %.4x %.4x }",
3358 read_buf
[0], read_buf
[1], read_buf
[2], read_buf
[3],
3359 read_buf
[4], read_buf
[5], read_buf
[6]);
3361 /* set gpio register */
3362 if ((status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3363 (uint32_t)(signalyzer_h_side
<< 8))) != FT_OK
)
3365 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3366 return ERROR_JTAG_DEVICE_ERROR
;
3369 if ((status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
+ 1,
3372 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3373 return ERROR_JTAG_DEVICE_ERROR
;
3376 if ((status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3377 SIGNALYZER_COMMAND_GPIO_STATE
)) != FT_OK
)
3379 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3380 return ERROR_JTAG_DEVICE_ERROR
;
3383 /* read adapter type information */
3384 if ((status
= signalyzer_h_ctrl_write(SIGNALYZER_DATA_BUFFER_ADDR
,
3385 ((uint32_t)(signalyzer_h_side
<< 8) | 0x01))) != FT_OK
)
3387 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3388 return ERROR_JTAG_DEVICE_ERROR
;
3391 if ((status
= signalyzer_h_ctrl_write(
3392 (SIGNALYZER_DATA_BUFFER_ADDR
+ 1), 0xA000)) != FT_OK
)
3394 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3395 return ERROR_JTAG_DEVICE_ERROR
;
3398 if ((status
= signalyzer_h_ctrl_write(
3399 (SIGNALYZER_DATA_BUFFER_ADDR
+ 2), 0x0008)) != FT_OK
)
3401 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3402 return ERROR_JTAG_DEVICE_ERROR
;
3405 if ((status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3406 SIGNALYZER_COMMAND_I2C
)) != FT_OK
)
3408 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu", status
);
3409 return ERROR_JTAG_DEVICE_ERROR
;
3414 if ((status
= signalyzer_h_ctrl_read(SIGNALYZER_COMMAND_ADDR
,
3415 &read_buf
[0])) != FT_OK
)
3417 LOG_ERROR("signalyzer_h_ctrl_read returned: %lu", status
);
3418 return ERROR_JTAG_DEVICE_ERROR
;
3421 if (read_buf
[0] != 0x0498)
3422 signalyzer_h_adapter_type
= 0x0000;
3425 for (i
= 0; i
< 4; i
++)
3427 if ((status
= signalyzer_h_ctrl_read(
3428 (SIGNALYZER_DATA_BUFFER_ADDR
+ i
),
3429 &read_buf
[i
])) != FT_OK
)
3431 LOG_ERROR("signalyzer_h_ctrl_read returned: %lu",
3433 return ERROR_JTAG_DEVICE_ERROR
;
3437 signalyzer_h_adapter_type
= read_buf
[0];
3440 #elif BUILD_FT2232_LIBFTDI == 1
3441 /* currently libftdi does not allow reading individual eeprom
3442 * locations, therefore adapter type cannot be detected.
3443 * override with most common type
3445 signalyzer_h_adapter_type
= SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG
;
3448 enum reset_types jtag_reset_config
= jtag_get_reset_config();
3450 /* ADAPTOR: EM_LT16_A */
3451 if (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_LT16_A
)
3453 LOG_INFO("Signalyzer: EM-LT (16-channel level translator) "
3454 "detected. (HW: %2x).", (read_buf
[1] >> 8));
3462 low_direction
= 0x1b;
3465 high_direction
= 0x0;
3467 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3469 low_direction
&= ~nTRSTnOE
; /* nTRST input */
3470 low_output
&= ~nTRST
; /* nTRST = 0 */
3474 low_direction
|= nTRSTnOE
; /* nTRST output */
3475 low_output
|= nTRST
; /* nTRST = 1 */
3478 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
3480 low_direction
|= nSRSTnOE
; /* nSRST output */
3481 low_output
|= nSRST
; /* nSRST = 1 */
3485 low_direction
&= ~nSRSTnOE
; /* nSRST input */
3486 low_output
&= ~nSRST
; /* nSRST = 0 */
3489 #if BUILD_FT2232_FTD2XX == 1
3490 /* enable power to the module */
3491 if ((status
= signalyzer_h_ctrl_write(
3492 SIGNALYZER_DATA_BUFFER_ADDR
,
3493 ((uint32_t)(signalyzer_h_side
<< 8) | 0x01)))
3496 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3498 return ERROR_JTAG_DEVICE_ERROR
;
3501 if ((status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3502 SIGNALYZER_COMMAND_POWERCONTROL_SET
)) != FT_OK
)
3504 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3506 return ERROR_JTAG_DEVICE_ERROR
;
3509 /* set gpio mode register */
3510 if ((status
= signalyzer_h_ctrl_write(
3511 SIGNALYZER_DATA_BUFFER_ADDR
,
3512 (uint32_t)(signalyzer_h_side
<< 8))) != FT_OK
)
3514 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3516 return ERROR_JTAG_DEVICE_ERROR
;
3519 if ((status
= signalyzer_h_ctrl_write(
3520 SIGNALYZER_DATA_BUFFER_ADDR
+ 1, 0x0000))
3523 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3525 return ERROR_JTAG_DEVICE_ERROR
;
3528 if ((status
= signalyzer_h_ctrl_write(SIGNALYZER_COMMAND_ADDR
,
3529 SIGNALYZER_COMMAND_GPIO_MODE
)) != FT_OK
)
3531 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3533 return ERROR_JTAG_DEVICE_ERROR
;
3536 /* set gpio register */
3537 if ((status
= signalyzer_h_ctrl_write(
3538 SIGNALYZER_DATA_BUFFER_ADDR
,
3539 (uint32_t)(signalyzer_h_side
<< 8))) != FT_OK
)
3541 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3543 return ERROR_JTAG_DEVICE_ERROR
;
3546 if ((status
= signalyzer_h_ctrl_write(
3547 SIGNALYZER_DATA_BUFFER_ADDR
+ 1, 0x4040))
3550 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3552 return ERROR_JTAG_DEVICE_ERROR
;
3555 if ((status
= signalyzer_h_ctrl_write(
3556 SIGNALYZER_COMMAND_ADDR
,
3557 SIGNALYZER_COMMAND_GPIO_STATE
)) != FT_OK
)
3559 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3561 return ERROR_JTAG_DEVICE_ERROR
;
3566 /* ADAPTOR: EM_ARM_JTAG, EM_ARM_JTAG_P, EM_JTAG, EM_JTAG_P */
3567 else if ((signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG
) ||
3568 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P
) ||
3569 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_JTAG
) ||
3570 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_JTAG_P
))
3572 if (signalyzer_h_adapter_type
3573 == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG
)
3574 LOG_INFO("Signalyzer: EM-ARM-JTAG (ARM JTAG) "
3575 "detected. (HW: %2x).", (read_buf
[1] >> 8));
3576 else if (signalyzer_h_adapter_type
3577 == SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P
)
3578 LOG_INFO("Signalyzer: EM-ARM-JTAG_P "
3579 "(ARM JTAG with PSU) detected. (HW: %2x).",
3580 (read_buf
[1] >> 8));
3581 else if (signalyzer_h_adapter_type
3582 == SIGNALYZER_MODULE_TYPE_EM_JTAG
)
3583 LOG_INFO("Signalyzer: EM-JTAG (Generic JTAG) "
3584 "detected. (HW: %2x).", (read_buf
[1] >> 8));
3585 else if (signalyzer_h_adapter_type
3586 == SIGNALYZER_MODULE_TYPE_EM_JTAG_P
)
3587 LOG_INFO("Signalyzer: EM-JTAG-P "
3588 "(Generic JTAG with PSU) detected. (HW: %2x).",
3589 (read_buf
[1] >> 8));
3597 low_direction
= 0x1b;
3600 high_direction
= 0x1f;
3602 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3604 high_output
|= nTRSTnOE
;
3605 high_output
&= ~nTRST
;
3609 high_output
&= ~nTRSTnOE
;
3610 high_output
|= nTRST
;
3613 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
3615 high_output
&= ~nSRSTnOE
;
3616 high_output
|= nSRST
;
3620 high_output
|= nSRSTnOE
;
3621 high_output
&= ~nSRST
;
3624 #if BUILD_FT2232_FTD2XX == 1
3625 /* enable power to the module */
3626 if ((status
= signalyzer_h_ctrl_write(
3627 SIGNALYZER_DATA_BUFFER_ADDR
,
3628 ((uint32_t)(signalyzer_h_side
<< 8) | 0x01)))
3631 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3633 return ERROR_JTAG_DEVICE_ERROR
;
3636 if ((status
= signalyzer_h_ctrl_write(
3637 SIGNALYZER_COMMAND_ADDR
,
3638 SIGNALYZER_COMMAND_POWERCONTROL_SET
)) != FT_OK
)
3640 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3642 return ERROR_JTAG_DEVICE_ERROR
;
3645 /* set gpio mode register (IO_16 and IO_17 set as analog
3646 * inputs, other is gpio)
3648 if ((status
= signalyzer_h_ctrl_write(
3649 SIGNALYZER_DATA_BUFFER_ADDR
,
3650 (uint32_t)(signalyzer_h_side
<< 8))) != FT_OK
)
3652 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3654 return ERROR_JTAG_DEVICE_ERROR
;
3657 if ((status
= signalyzer_h_ctrl_write(
3658 SIGNALYZER_DATA_BUFFER_ADDR
+ 1, 0x0060))
3661 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3663 return ERROR_JTAG_DEVICE_ERROR
;
3666 if ((status
= signalyzer_h_ctrl_write(
3667 SIGNALYZER_COMMAND_ADDR
,
3668 SIGNALYZER_COMMAND_GPIO_MODE
)) != FT_OK
)
3670 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3672 return ERROR_JTAG_DEVICE_ERROR
;
3675 /* set gpio register (all inputs, for -P modules,
3676 * PSU will be turned off)
3678 if ((status
= signalyzer_h_ctrl_write(
3679 SIGNALYZER_DATA_BUFFER_ADDR
,
3680 (uint32_t)(signalyzer_h_side
<< 8))) != FT_OK
)
3682 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3684 return ERROR_JTAG_DEVICE_ERROR
;
3687 if ((status
= signalyzer_h_ctrl_write(
3688 SIGNALYZER_DATA_BUFFER_ADDR
+ 1, 0x0000))
3691 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3693 return ERROR_JTAG_DEVICE_ERROR
;
3696 if ((status
= signalyzer_h_ctrl_write(
3697 SIGNALYZER_COMMAND_ADDR
,
3698 SIGNALYZER_COMMAND_GPIO_STATE
)) != FT_OK
)
3700 LOG_ERROR("signalyzer_h_ctrl_write returned: %lu",
3702 return ERROR_JTAG_DEVICE_ERROR
;
3707 else if (signalyzer_h_adapter_type
== 0x0000)
3709 LOG_INFO("Signalyzer: No external modules were detected.");
3717 low_direction
= 0x1b;
3720 high_direction
= 0x0;
3722 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3724 low_direction
&= ~nTRSTnOE
; /* nTRST input */
3725 low_output
&= ~nTRST
; /* nTRST = 0 */
3729 low_direction
|= nTRSTnOE
; /* nTRST output */
3730 low_output
|= nTRST
; /* nTRST = 1 */
3733 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
3735 low_direction
|= nSRSTnOE
; /* nSRST output */
3736 low_output
|= nSRST
; /* nSRST = 1 */
3740 low_direction
&= ~nSRSTnOE
; /* nSRST input */
3741 low_output
&= ~nSRST
; /* nSRST = 0 */
3746 LOG_ERROR("Unknown module type is detected: %.4x",
3747 signalyzer_h_adapter_type
);
3748 return ERROR_JTAG_DEVICE_ERROR
;
3751 /* initialize low byte of controller for jtag operation */
3753 buf
[1] = low_output
;
3754 buf
[2] = low_direction
;
3756 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
)
3757 || (bytes_written
!= 3))
3759 LOG_ERROR("couldn't initialize Signalyzer-H layout");
3760 return ERROR_JTAG_INIT_FAILED
;
3763 #if BUILD_FT2232_FTD2XX == 1
3764 if (ftdi_device
== FT_DEVICE_2232H
)
3766 /* initialize high byte of controller for jtag operation */
3768 buf
[1] = high_output
;
3769 buf
[2] = high_direction
;
3771 if ((ft2232_write(buf
, 3, &bytes_written
) != ERROR_OK
)
3772 || (bytes_written
!= 3))
3774 LOG_ERROR("couldn't initialize Signalyzer-H layout");
3775 return ERROR_JTAG_INIT_FAILED
;
3778 #elif BUILD_FT2232_LIBFTDI == 1
3779 if (ftdi_device
== TYPE_2232H
)
3781 /* initialize high byte of controller for jtag operation */
3783 buf
[1] = high_output
;
3784 buf
[2] = high_direction
;
3786 if ((ft2232_write(buf
, 3, &bytes_written
) != ERROR_OK
)
3787 || (bytes_written
!= 3))
3789 LOG_ERROR("couldn't initialize Signalyzer-H layout");
3790 return ERROR_JTAG_INIT_FAILED
;
3797 static void signalyzer_h_reset(int trst
, int srst
)
3799 enum reset_types jtag_reset_config
= jtag_get_reset_config();
3801 /* ADAPTOR: EM_LT16_A */
3802 if (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_LT16_A
)
3806 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3807 /* switch to output pin (output is low) */
3808 low_direction
|= nTRSTnOE
;
3810 /* switch output low */
3811 low_output
&= ~nTRST
;
3815 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3816 /* switch to input pin (high-Z + internal
3817 * and external pullup) */
3818 low_direction
&= ~nTRSTnOE
;
3820 /* switch output high */
3821 low_output
|= nTRST
;
3826 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
3827 /* switch output low */
3828 low_output
&= ~nSRST
;
3830 /* switch to output pin (output is low) */
3831 low_direction
|= nSRSTnOE
;
3835 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
3836 /* switch output high */
3837 low_output
|= nSRST
;
3839 /* switch to input pin (high-Z) */
3840 low_direction
&= ~nSRSTnOE
;
3843 /* command "set data bits low byte" */
3845 buffer_write(low_output
);
3846 buffer_write(low_direction
);
3847 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, "
3848 "low_direction: 0x%2.2x",
3849 trst
, srst
, low_output
, low_direction
);
3851 /* ADAPTOR: EM_ARM_JTAG, EM_ARM_JTAG_P, EM_JTAG, EM_JTAG_P */
3852 else if ((signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG
) ||
3853 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_ARM_JTAG_P
) ||
3854 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_JTAG
) ||
3855 (signalyzer_h_adapter_type
== SIGNALYZER_MODULE_TYPE_EM_JTAG_P
))
3859 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3860 high_output
&= ~nTRSTnOE
;
3862 high_output
&= ~nTRST
;
3866 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3867 high_output
|= nTRSTnOE
;
3869 high_output
|= nTRST
;
3874 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
3875 high_output
&= ~nSRST
;
3877 high_output
&= ~nSRSTnOE
;
3881 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
3882 high_output
|= nSRST
;
3884 high_output
|= nSRSTnOE
;
3887 /* command "set data bits high byte" */
3889 buffer_write(high_output
);
3890 buffer_write(high_direction
);
3891 LOG_INFO("trst: %i, srst: %i, high_output: 0x%2.2x, "
3892 "high_direction: 0x%2.2x",
3893 trst
, srst
, high_output
, high_direction
);
3895 else if (signalyzer_h_adapter_type
== 0x0000)
3899 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3900 /* switch to output pin (output is low) */
3901 low_direction
|= nTRSTnOE
;
3903 /* switch output low */
3904 low_output
&= ~nTRST
;
3908 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
3909 /* switch to input pin (high-Z + internal
3910 * and external pullup) */
3911 low_direction
&= ~nTRSTnOE
;
3913 /* switch output high */
3914 low_output
|= nTRST
;
3919 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
3920 /* switch output low */
3921 low_output
&= ~nSRST
;
3923 /* switch to output pin (output is low) */
3924 low_direction
|= nSRSTnOE
;
3928 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
3929 /* switch output high */
3930 low_output
|= nSRST
;
3932 /* switch to input pin (high-Z) */
3933 low_direction
&= ~nSRSTnOE
;
3936 /* command "set data bits low byte" */
3938 buffer_write(low_output
);
3939 buffer_write(low_direction
);
3940 LOG_DEBUG("trst: %i, srst: %i, low_output: 0x%2.2x, "
3941 "low_direction: 0x%2.2x",
3942 trst
, srst
, low_output
, low_direction
);
3946 static void signalyzer_h_blink(void)
3948 signalyzer_h_led_set(signalyzer_h_side
, SIGNALYZER_LED_RED
, 100, 0, 1);
3951 /********************************************************************
3952 * Support for KT-LINK
3953 * JTAG adapter from KRISTECH
3954 * http://www.kristech.eu
3955 *******************************************************************/
3956 static int ktlink_init(void)
3959 uint32_t bytes_written
;
3960 uint8_t swd_en
= 0x20; //0x20 SWD disable, 0x00 SWD enable (ADBUS5)
3962 low_output
= 0x08 | swd_en
; // value; TMS=1,TCK=0,TDI=0,SWD=swd_en
3963 low_direction
= 0x3B; // out=1; TCK/TDI/TMS=out,TDO=in,SWD=out,RTCK=in,SRSTIN=in
3965 // initialize low port
3966 buf
[0] = 0x80; // command "set data bits low byte"
3967 buf
[1] = low_output
;
3968 buf
[2] = low_direction
;
3969 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
3971 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
3973 LOG_ERROR("couldn't initialize FT2232 with 'ktlink' layout");
3974 return ERROR_JTAG_INIT_FAILED
;
3982 high_output
= 0x80; // turn LED on
3983 high_direction
= 0xFF; // all outputs
3985 enum reset_types jtag_reset_config
= jtag_get_reset_config();
3987 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
) {
3988 high_output
|= nTRSTnOE
;
3989 high_output
&= ~nTRST
;
3991 high_output
&= ~nTRSTnOE
;
3992 high_output
|= nTRST
;
3995 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
) {
3996 high_output
&= ~nSRSTnOE
;
3997 high_output
|= nSRST
;
3999 high_output
|= nSRSTnOE
;
4000 high_output
&= ~nSRST
;
4003 // initialize high port
4004 buf
[0] = 0x82; // command "set data bits high byte"
4005 buf
[1] = high_output
; // value
4006 buf
[2] = high_direction
;
4007 LOG_DEBUG("%2.2x %2.2x %2.2x", buf
[0], buf
[1], buf
[2]);
4009 if (((ft2232_write(buf
, 3, &bytes_written
)) != ERROR_OK
) || (bytes_written
!= 3))
4011 LOG_ERROR("couldn't initialize FT2232 with 'ktlink' layout");
4012 return ERROR_JTAG_INIT_FAILED
;
4018 static void ktlink_reset(int trst
, int srst
)
4020 enum reset_types jtag_reset_config
= jtag_get_reset_config();
4023 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
4024 high_output
&= ~nTRSTnOE
;
4026 high_output
&= ~nTRST
;
4027 } else if (trst
== 0) {
4028 if (jtag_reset_config
& RESET_TRST_OPEN_DRAIN
)
4029 high_output
|= nTRSTnOE
;
4031 high_output
|= nTRST
;
4035 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
4036 high_output
&= ~nSRST
;
4038 high_output
&= ~nSRSTnOE
;
4039 } else if (srst
== 0) {
4040 if (jtag_reset_config
& RESET_SRST_PUSH_PULL
)
4041 high_output
|= nSRST
;
4043 high_output
|= nSRSTnOE
;
4046 buffer_write(0x82); // command "set data bits high byte"
4047 buffer_write(high_output
);
4048 buffer_write(high_direction
);
4049 LOG_DEBUG("trst: %i, srst: %i, high_output: 0x%2.2x, high_direction: 0x%2.2x", trst
, srst
, high_output
,high_direction
);
4052 static void ktlink_blink(void)
4054 /* LED connected to ACBUS7 */
4055 if (high_output
& 0x80)
4056 high_output
&= 0x7F;
4058 high_output
|= 0x80;
4060 buffer_write(0x82); // command "set data bits high byte"
4061 buffer_write(high_output
);
4062 buffer_write(high_direction
);
4065 static const struct command_registration ft2232_command_handlers
[] = {
4067 .name
= "ft2232_device_desc",
4068 .handler
= &ft2232_handle_device_desc_command
,
4069 .mode
= COMMAND_CONFIG
,
4070 .help
= "set the USB device description of the FTDI FT2232 device",
4071 .usage
= "description_string",
4074 .name
= "ft2232_serial",
4075 .handler
= &ft2232_handle_serial_command
,
4076 .mode
= COMMAND_CONFIG
,
4077 .help
= "set the serial number of the FTDI FT2232 device",
4078 .usage
= "serial_string",
4081 .name
= "ft2232_layout",
4082 .handler
= &ft2232_handle_layout_command
,
4083 .mode
= COMMAND_CONFIG
,
4084 .help
= "set the layout of the FT2232 GPIO signals used "
4085 "to control output-enables and reset signals",
4086 .usage
= "layout_name",
4089 .name
= "ft2232_vid_pid",
4090 .handler
= &ft2232_handle_vid_pid_command
,
4091 .mode
= COMMAND_CONFIG
,
4092 .help
= "the vendor ID and product ID of the FTDI FT2232 device",
4093 .usage
= "(vid pid)* ",
4096 .name
= "ft2232_latency",
4097 .handler
= &ft2232_handle_latency_command
,
4098 .mode
= COMMAND_CONFIG
,
4099 .help
= "set the FT2232 latency timer to a new value",
4102 COMMAND_REGISTRATION_DONE
4105 struct jtag_interface ft2232_interface
= {
4107 .commands
= ft2232_command_handlers
,
4109 .init
= ft2232_init
,
4110 .quit
= ft2232_quit
,
4111 .speed
= ft2232_speed
,
4112 .speed_div
= ft2232_speed_div
,
4114 .execute_queue
= ft2232_execute_queue
,