1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2007-2010 Øyvind Harboe *
6 * oyvind.harboe@zylin.com *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * Copyright (C) 2008 by Hongtao Zheng *
14 * Copyright (C) 2009 by David Brownell *
16 * This program is free software; you can redistribute it and/or modify *
17 * it under the terms of the GNU General Public License as published by *
18 * the Free Software Foundation; either version 2 of the License, or *
19 * (at your option) any later version. *
21 * This program is distributed in the hope that it will be useful, *
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
24 * GNU General Public License for more details. *
26 * You should have received a copy of the GNU General Public License *
27 * along with this program; if not, write to the *
28 * Free Software Foundation, Inc., *
29 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
30 ***************************************************************************/
35 #include "breakpoints.h"
36 #include "embeddedice.h"
37 #include "target_request.h"
39 #include <helper/time_support.h>
40 #include "arm_simulator.h"
41 #include "arm_semihosting.h"
42 #include "algorithm.h"
49 * Hold common code supporting the ARM7 and ARM9 core generations.
51 * While the ARM core implementations evolved substantially during these
52 * two generations, they look quite similar from the JTAG perspective.
53 * Both have similar debug facilities, based on the same two scan chains
54 * providing access to the core and to an EmbeddedICE module. Both can
55 * support similar ETM and ETB modules, for tracing. And both expose
56 * what could be viewed as "ARM Classic", with multiple processor modes,
57 * shadowed registers, and support for the Thumb instruction set.
59 * Processor differences include things like presence or absence of MMU
60 * and cache, pipeline sizes, use of a modified Harvard Architecure
61 * (with separate instruction and data busses from the CPU), support
62 * for cpu clock gating during idle, and more.
65 static int arm7_9_debug_entry(struct target
*target
);
68 * Clear watchpoints for an ARM7/9 target.
70 * @param arm7_9 Pointer to the common struct for an ARM7/9 target
71 * @return JTAG error status after executing queue
73 static int arm7_9_clear_watchpoints(struct arm7_9_common
*arm7_9
)
76 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
], 0x0);
77 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_VALUE
], 0x0);
78 arm7_9
->sw_breakpoint_count
= 0;
79 arm7_9
->sw_breakpoints_added
= 0;
81 arm7_9
->wp1_used
= arm7_9
->wp1_used_default
;
82 arm7_9
->wp_available
= arm7_9
->wp_available_max
;
84 return jtag_execute_queue();
88 * Assign a watchpoint to one of the two available hardware comparators in an
89 * ARM7 or ARM9 target.
91 * @param arm7_9 Pointer to the common struct for an ARM7/9 target
92 * @param breakpoint Pointer to the breakpoint to be used as a watchpoint
94 static void arm7_9_assign_wp(struct arm7_9_common
*arm7_9
, struct breakpoint
*breakpoint
)
96 if (!arm7_9
->wp0_used
)
100 arm7_9
->wp_available
--;
102 else if (!arm7_9
->wp1_used
)
104 arm7_9
->wp1_used
= 1;
106 arm7_9
->wp_available
--;
110 LOG_ERROR("BUG: no hardware comparator available");
112 LOG_DEBUG("BPID: %d (0x%08" PRIx32
") using hw wp: %d",
113 breakpoint
->unique_id
,
119 * Setup an ARM7/9 target's embedded ICE registers for software breakpoints.
121 * @param arm7_9 Pointer to common struct for ARM7/9 targets
122 * @return Error codes if there is a problem finding a watchpoint or the result
123 * of executing the JTAG queue
125 static int arm7_9_set_software_breakpoints(struct arm7_9_common
*arm7_9
)
127 if (arm7_9
->sw_breakpoints_added
)
131 if (arm7_9
->wp_available
< 1)
133 LOG_WARNING("can't enable sw breakpoints with no watchpoint unit available");
134 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
136 arm7_9
->wp_available
--;
138 /* pick a breakpoint unit */
139 if (!arm7_9
->wp0_used
)
141 arm7_9
->sw_breakpoints_added
= 1;
142 arm7_9
->wp0_used
= 3;
143 } else if (!arm7_9
->wp1_used
)
145 arm7_9
->sw_breakpoints_added
= 2;
146 arm7_9
->wp1_used
= 3;
150 LOG_ERROR("BUG: both watchpoints used, but wp_available >= 1");
154 if (arm7_9
->sw_breakpoints_added
== 1)
156 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_DATA_VALUE
], arm7_9
->arm_bkpt
);
157 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_DATA_MASK
], 0x0);
158 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_MASK
], 0xffffffffu
);
159 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_MASK
], ~EICE_W_CTRL_nOPC
& 0xff);
160 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
], EICE_W_CTRL_ENABLE
);
162 else if (arm7_9
->sw_breakpoints_added
== 2)
164 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_DATA_VALUE
], arm7_9
->arm_bkpt
);
165 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_DATA_MASK
], 0x0);
166 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_MASK
], 0xffffffffu
);
167 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_MASK
], ~EICE_W_CTRL_nOPC
& 0xff);
168 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_VALUE
], EICE_W_CTRL_ENABLE
);
172 LOG_ERROR("BUG: both watchpoints used, but wp_available >= 1");
175 LOG_DEBUG("SW BP using hw wp: %d",
176 arm7_9
->sw_breakpoints_added
);
178 return jtag_execute_queue();
182 * Setup the common pieces for an ARM7/9 target after reset or on startup.
184 * @param target Pointer to an ARM7/9 target to setup
185 * @return Result of clearing the watchpoints on the target
187 static int arm7_9_setup(struct target
*target
)
189 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
191 return arm7_9_clear_watchpoints(arm7_9
);
195 * Set either a hardware or software breakpoint on an ARM7/9 target. The
196 * breakpoint is set up even if it is already set. Some actions, e.g. reset,
197 * might have erased the values in Embedded ICE.
199 * @param target Pointer to the target device to set the breakpoints on
200 * @param breakpoint Pointer to the breakpoint to be set
201 * @return For hardware breakpoints, this is the result of executing the JTAG
202 * queue. For software breakpoints, this will be the status of the
203 * required memory reads and writes
205 static int arm7_9_set_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
207 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
208 int retval
= ERROR_OK
;
210 LOG_DEBUG("BPID: %d, Address: 0x%08" PRIx32
", Type: %d" ,
211 breakpoint
->unique_id
,
215 if (target
->state
!= TARGET_HALTED
)
217 LOG_WARNING("target not halted");
218 return ERROR_TARGET_NOT_HALTED
;
221 if (breakpoint
->type
== BKPT_HARD
)
223 /* either an ARM (4 byte) or Thumb (2 byte) breakpoint */
224 uint32_t mask
= (breakpoint
->length
== 4) ? 0x3u
: 0x1u
;
226 /* reassign a hw breakpoint */
227 if (breakpoint
->set
== 0)
229 arm7_9_assign_wp(arm7_9
, breakpoint
);
232 if (breakpoint
->set
== 1)
234 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_VALUE
], breakpoint
->address
);
235 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_MASK
], mask
);
236 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_DATA_MASK
], 0xffffffffu
);
237 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_MASK
], ~EICE_W_CTRL_nOPC
& 0xff);
238 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
], EICE_W_CTRL_ENABLE
);
240 else if (breakpoint
->set
== 2)
242 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_VALUE
], breakpoint
->address
);
243 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_MASK
], mask
);
244 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_DATA_MASK
], 0xffffffffu
);
245 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_MASK
], ~EICE_W_CTRL_nOPC
& 0xff);
246 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_VALUE
], EICE_W_CTRL_ENABLE
);
250 LOG_ERROR("BUG: no hardware comparator available");
254 retval
= jtag_execute_queue();
256 else if (breakpoint
->type
== BKPT_SOFT
)
258 /* did we already set this breakpoint? */
262 if (breakpoint
->length
== 4)
264 uint32_t verify
= 0xffffffff;
265 /* keep the original instruction in target endianness */
266 if ((retval
= target_read_memory(target
, breakpoint
->address
, 4, 1, breakpoint
->orig_instr
)) != ERROR_OK
)
270 /* write the breakpoint instruction in target endianness (arm7_9->arm_bkpt is host endian) */
271 if ((retval
= target_write_u32(target
, breakpoint
->address
, arm7_9
->arm_bkpt
)) != ERROR_OK
)
276 if ((retval
= target_read_u32(target
, breakpoint
->address
, &verify
)) != ERROR_OK
)
280 if (verify
!= arm7_9
->arm_bkpt
)
282 LOG_ERROR("Unable to set 32 bit software breakpoint at address %08" PRIx32
" - check that memory is read/writable", breakpoint
->address
);
288 uint16_t verify
= 0xffff;
289 /* keep the original instruction in target endianness */
290 if ((retval
= target_read_memory(target
, breakpoint
->address
, 2, 1, breakpoint
->orig_instr
)) != ERROR_OK
)
294 /* write the breakpoint instruction in target endianness (arm7_9->thumb_bkpt is host endian) */
295 if ((retval
= target_write_u16(target
, breakpoint
->address
, arm7_9
->thumb_bkpt
)) != ERROR_OK
)
300 if ((retval
= target_read_u16(target
, breakpoint
->address
, &verify
)) != ERROR_OK
)
304 if (verify
!= arm7_9
->thumb_bkpt
)
306 LOG_ERROR("Unable to set thumb software breakpoint at address %08" PRIx32
" - check that memory is read/writable", breakpoint
->address
);
311 if ((retval
= arm7_9_set_software_breakpoints(arm7_9
)) != ERROR_OK
)
314 arm7_9
->sw_breakpoint_count
++;
323 * Unsets an existing breakpoint on an ARM7/9 target. If it is a hardware
324 * breakpoint, the watchpoint used will be freed and the Embedded ICE registers
325 * will be updated. Otherwise, the software breakpoint will be restored to its
326 * original instruction if it hasn't already been modified.
328 * @param target Pointer to ARM7/9 target to unset the breakpoint from
329 * @param breakpoint Pointer to breakpoint to be unset
330 * @return For hardware breakpoints, this is the result of executing the JTAG
331 * queue. For software breakpoints, this will be the status of the
332 * required memory reads and writes
334 static int arm7_9_unset_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
336 int retval
= ERROR_OK
;
337 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
339 LOG_DEBUG("BPID: %d, Address: 0x%08" PRIx32
,
340 breakpoint
->unique_id
,
341 breakpoint
->address
);
343 if (!breakpoint
->set
)
345 LOG_WARNING("breakpoint not set");
349 if (breakpoint
->type
== BKPT_HARD
)
351 LOG_DEBUG("BPID: %d Releasing hw wp: %d",
352 breakpoint
->unique_id
,
354 if (breakpoint
->set
== 1)
356 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
], 0x0);
357 arm7_9
->wp0_used
= 0;
358 arm7_9
->wp_available
++;
360 else if (breakpoint
->set
== 2)
362 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_VALUE
], 0x0);
363 arm7_9
->wp1_used
= 0;
364 arm7_9
->wp_available
++;
366 retval
= jtag_execute_queue();
371 /* restore original instruction (kept in target endianness) */
372 if (breakpoint
->length
== 4)
374 uint32_t current_instr
;
375 /* check that user program as not modified breakpoint instruction */
376 if ((retval
= target_read_memory(target
, breakpoint
->address
, 4, 1, (uint8_t*)¤t_instr
)) != ERROR_OK
)
380 current_instr
= target_buffer_get_u32(target
, (uint8_t *)¤t_instr
);
381 if (current_instr
== arm7_9
->arm_bkpt
)
382 if ((retval
= target_write_memory(target
, breakpoint
->address
, 4, 1, breakpoint
->orig_instr
)) != ERROR_OK
)
389 uint16_t current_instr
;
390 /* check that user program as not modified breakpoint instruction */
391 if ((retval
= target_read_memory(target
, breakpoint
->address
, 2, 1, (uint8_t*)¤t_instr
)) != ERROR_OK
)
395 if (current_instr
== arm7_9
->thumb_bkpt
)
396 if ((retval
= target_write_memory(target
, breakpoint
->address
, 2, 1, breakpoint
->orig_instr
)) != ERROR_OK
)
402 if (--arm7_9
->sw_breakpoint_count
==0)
404 /* We have removed the last sw breakpoint, clear the hw breakpoint we used to implement it */
405 if (arm7_9
->sw_breakpoints_added
== 1)
407 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
], 0);
409 else if (arm7_9
->sw_breakpoints_added
== 2)
411 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_VALUE
], 0);
422 * Add a breakpoint to an ARM7/9 target. This makes sure that there are no
423 * dangling breakpoints and that the desired breakpoint can be added.
425 * @param target Pointer to the target ARM7/9 device to add a breakpoint to
426 * @param breakpoint Pointer to the breakpoint to be added
427 * @return An error status if there is a problem adding the breakpoint or the
428 * result of setting the breakpoint
430 int arm7_9_add_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
432 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
434 if (arm7_9
->breakpoint_count
== 0)
436 /* make sure we don't have any dangling breakpoints. This is vital upon
437 * GDB connect/disconnect
439 arm7_9_clear_watchpoints(arm7_9
);
442 if ((breakpoint
->type
== BKPT_HARD
) && (arm7_9
->wp_available
< 1))
444 LOG_INFO("no watchpoint unit available for hardware breakpoint");
445 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
448 if ((breakpoint
->length
!= 2) && (breakpoint
->length
!= 4))
450 LOG_INFO("only breakpoints of two (Thumb) or four (ARM) bytes length supported");
451 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
454 if (breakpoint
->type
== BKPT_HARD
)
456 arm7_9_assign_wp(arm7_9
, breakpoint
);
459 arm7_9
->breakpoint_count
++;
461 return arm7_9_set_breakpoint(target
, breakpoint
);
465 * Removes a breakpoint from an ARM7/9 target. This will make sure there are no
466 * dangling breakpoints and updates available watchpoints if it is a hardware
469 * @param target Pointer to the target to have a breakpoint removed
470 * @param breakpoint Pointer to the breakpoint to be removed
471 * @return Error status if there was a problem unsetting the breakpoint or the
472 * watchpoints could not be cleared
474 int arm7_9_remove_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
476 int retval
= ERROR_OK
;
477 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
479 if ((retval
= arm7_9_unset_breakpoint(target
, breakpoint
)) != ERROR_OK
)
484 if (breakpoint
->type
== BKPT_HARD
)
485 arm7_9
->wp_available
++;
487 arm7_9
->breakpoint_count
--;
488 if (arm7_9
->breakpoint_count
== 0)
490 /* make sure we don't have any dangling breakpoints */
491 if ((retval
= arm7_9_clear_watchpoints(arm7_9
)) != ERROR_OK
)
501 * Sets a watchpoint for an ARM7/9 target in one of the watchpoint units. It is
502 * considered a bug to call this function when there are no available watchpoint
505 * @param target Pointer to an ARM7/9 target to set a watchpoint on
506 * @param watchpoint Pointer to the watchpoint to be set
507 * @return Error status if watchpoint set fails or the result of executing the
510 static int arm7_9_set_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
512 int retval
= ERROR_OK
;
513 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
517 mask
= watchpoint
->length
- 1;
519 if (target
->state
!= TARGET_HALTED
)
521 LOG_WARNING("target not halted");
522 return ERROR_TARGET_NOT_HALTED
;
525 if (watchpoint
->rw
== WPT_ACCESS
)
530 if (!arm7_9
->wp0_used
)
532 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_VALUE
], watchpoint
->address
);
533 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_MASK
], mask
);
534 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_DATA_MASK
], watchpoint
->mask
);
535 if (watchpoint
->mask
!= 0xffffffffu
)
536 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_DATA_VALUE
], watchpoint
->value
);
537 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_MASK
], 0xff & ~EICE_W_CTRL_nOPC
& ~rw_mask
);
538 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
], EICE_W_CTRL_ENABLE
| EICE_W_CTRL_nOPC
| (watchpoint
->rw
& 1));
540 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
545 arm7_9
->wp0_used
= 2;
547 else if (!arm7_9
->wp1_used
)
549 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_VALUE
], watchpoint
->address
);
550 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_MASK
], mask
);
551 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_DATA_MASK
], watchpoint
->mask
);
552 if (watchpoint
->mask
!= 0xffffffffu
)
553 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_DATA_VALUE
], watchpoint
->value
);
554 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_MASK
], 0xff & ~EICE_W_CTRL_nOPC
& ~rw_mask
);
555 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_VALUE
], EICE_W_CTRL_ENABLE
| EICE_W_CTRL_nOPC
| (watchpoint
->rw
& 1));
557 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
562 arm7_9
->wp1_used
= 2;
566 LOG_ERROR("BUG: no hardware comparator available");
574 * Unset an existing watchpoint and clear the used watchpoint unit.
576 * @param target Pointer to the target to have the watchpoint removed
577 * @param watchpoint Pointer to the watchpoint to be removed
578 * @return Error status while trying to unset the watchpoint or the result of
579 * executing the JTAG queue
581 static int arm7_9_unset_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
583 int retval
= ERROR_OK
;
584 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
586 if (target
->state
!= TARGET_HALTED
)
588 LOG_WARNING("target not halted");
589 return ERROR_TARGET_NOT_HALTED
;
592 if (!watchpoint
->set
)
594 LOG_WARNING("breakpoint not set");
598 if (watchpoint
->set
== 1)
600 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
], 0x0);
601 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
605 arm7_9
->wp0_used
= 0;
607 else if (watchpoint
->set
== 2)
609 embeddedice_set_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_VALUE
], 0x0);
610 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
614 arm7_9
->wp1_used
= 0;
622 * Add a watchpoint to an ARM7/9 target. If there are no watchpoint units
623 * available, an error response is returned.
625 * @param target Pointer to the ARM7/9 target to add a watchpoint to
626 * @param watchpoint Pointer to the watchpoint to be added
627 * @return Error status while trying to add the watchpoint
629 int arm7_9_add_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
631 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
633 if (arm7_9
->wp_available
< 1)
635 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
638 if ((watchpoint
->length
!= 1) && (watchpoint
->length
!= 2) && (watchpoint
->length
!= 4))
640 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
643 arm7_9
->wp_available
--;
649 * Remove a watchpoint from an ARM7/9 target. The watchpoint will be unset and
650 * the used watchpoint unit will be reopened.
652 * @param target Pointer to the target to remove a watchpoint from
653 * @param watchpoint Pointer to the watchpoint to be removed
654 * @return Result of trying to unset the watchpoint
656 int arm7_9_remove_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
658 int retval
= ERROR_OK
;
659 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
663 if ((retval
= arm7_9_unset_watchpoint(target
, watchpoint
)) != ERROR_OK
)
669 arm7_9
->wp_available
++;
675 * Restarts the target by sending a RESTART instruction and moving the JTAG
676 * state to IDLE. This includes a timeout waiting for DBGACK and SYSCOMP to be
677 * asserted by the processor.
679 * @param target Pointer to target to issue commands to
680 * @return Error status if there is a timeout or a problem while executing the
683 int arm7_9_execute_sys_speed(struct target
*target
)
686 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
687 struct arm_jtag
*jtag_info
= &arm7_9
->jtag_info
;
688 struct reg
*dbg_stat
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_STAT
];
690 /* set RESTART instruction */
691 if (arm7_9
->need_bypass_before_restart
) {
692 arm7_9
->need_bypass_before_restart
= 0;
693 retval
= arm_jtag_set_instr(jtag_info
, 0xf, NULL
, TAP_IDLE
);
694 if (retval
!= ERROR_OK
)
697 retval
= arm_jtag_set_instr(jtag_info
, 0x4, NULL
, TAP_IDLE
);
698 if (retval
!= ERROR_OK
)
701 long long then
= timeval_ms();
703 while (!(timeout
= ((timeval_ms()-then
) > 1000)))
705 /* read debug status register */
706 embeddedice_read_reg(dbg_stat
);
707 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
709 if ((buf_get_u32(dbg_stat
->value
, EICE_DBG_STATUS_DBGACK
, 1))
710 && (buf_get_u32(dbg_stat
->value
, EICE_DBG_STATUS_SYSCOMP
, 1)))
712 if (debug_level
>= 3)
722 LOG_ERROR("timeout waiting for SYSCOMP & DBGACK, last DBG_STATUS: %" PRIx32
"", buf_get_u32(dbg_stat
->value
, 0, dbg_stat
->size
));
723 return ERROR_TARGET_TIMEOUT
;
730 * Restarts the target by sending a RESTART instruction and moving the JTAG
731 * state to IDLE. This validates that DBGACK and SYSCOMP are set without
732 * waiting until they are.
734 * @param target Pointer to the target to issue commands to
735 * @return Always ERROR_OK
737 static int arm7_9_execute_fast_sys_speed(struct target
*target
)
740 static uint8_t check_value
[4], check_mask
[4];
742 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
743 struct arm_jtag
*jtag_info
= &arm7_9
->jtag_info
;
744 struct reg
*dbg_stat
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_STAT
];
747 /* set RESTART instruction */
748 if (arm7_9
->need_bypass_before_restart
) {
749 arm7_9
->need_bypass_before_restart
= 0;
750 retval
= arm_jtag_set_instr(jtag_info
, 0xf, NULL
, TAP_IDLE
);
751 if (retval
!= ERROR_OK
)
754 retval
= arm_jtag_set_instr(jtag_info
, 0x4, NULL
, TAP_IDLE
);
755 if (retval
!= ERROR_OK
)
760 /* check for DBGACK and SYSCOMP set (others don't care) */
762 /* NB! These are constants that must be available until after next jtag_execute() and
763 * we evaluate the values upon first execution in lieu of setting up these constants
764 * during early setup.
766 buf_set_u32(check_value
, 0, 32, 0x9);
767 buf_set_u32(check_mask
, 0, 32, 0x9);
771 /* read debug status register */
772 embeddedice_read_reg_w_check(dbg_stat
, check_value
, check_mask
);
778 * Get some data from the ARM7/9 target.
780 * @param target Pointer to the ARM7/9 target to read data from
781 * @param size The number of 32bit words to be read
782 * @param buffer Pointer to the buffer that will hold the data
783 * @return The result of receiving data from the Embedded ICE unit
785 int arm7_9_target_request_data(struct target
*target
, uint32_t size
, uint8_t *buffer
)
787 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
788 struct arm_jtag
*jtag_info
= &arm7_9
->jtag_info
;
790 int retval
= ERROR_OK
;
793 data
= malloc(size
* (sizeof(uint32_t)));
795 retval
= embeddedice_receive(jtag_info
, data
, size
);
797 /* return the 32-bit ints in the 8-bit array */
798 for (i
= 0; i
< size
; i
++)
800 h_u32_to_le(buffer
+ (i
* 4), data
[i
]);
809 * Handles requests to an ARM7/9 target. If debug messaging is enabled, the
810 * target is running and the DCC control register has the W bit high, this will
811 * execute the request on the target.
813 * @param priv Void pointer expected to be a struct target pointer
814 * @return ERROR_OK unless there are issues with the JTAG queue or when reading
815 * from the Embedded ICE unit
817 static int arm7_9_handle_target_request(void *priv
)
819 int retval
= ERROR_OK
;
820 struct target
*target
= priv
;
821 if (!target_was_examined(target
))
823 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
824 struct arm_jtag
*jtag_info
= &arm7_9
->jtag_info
;
825 struct reg
*dcc_control
= &arm7_9
->eice_cache
->reg_list
[EICE_COMMS_CTRL
];
827 if (!target
->dbg_msg_enabled
)
830 if (target
->state
== TARGET_RUNNING
)
832 /* read DCC control register */
833 embeddedice_read_reg(dcc_control
);
834 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
840 if (buf_get_u32(dcc_control
->value
, 1, 1) == 1)
844 if ((retval
= embeddedice_receive(jtag_info
, &request
, 1)) != ERROR_OK
)
848 if ((retval
= target_request(target
, request
)) != ERROR_OK
)
859 * Polls an ARM7/9 target for its current status. If DBGACK is set, the target
860 * is manipulated to the right halted state based on its current state. This is
864 * <tr><th > State</th><th > Action</th></tr>
865 * <tr><td > TARGET_RUNNING | TARGET_RESET</td><td > Enters debug mode. If TARGET_RESET, pc may be checked</td></tr>
866 * <tr><td > TARGET_UNKNOWN</td><td > Warning is logged</td></tr>
867 * <tr><td > TARGET_DEBUG_RUNNING</td><td > Enters debug mode</td></tr>
868 * <tr><td > TARGET_HALTED</td><td > Nothing</td></tr>
871 * If the target does not end up in the halted state, a warning is produced. If
872 * DBGACK is cleared, then the target is expected to either be running or
875 * @param target Pointer to the ARM7/9 target to poll
876 * @return ERROR_OK or an error status if a command fails
878 int arm7_9_poll(struct target
*target
)
881 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
882 struct reg
*dbg_stat
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_STAT
];
884 /* read debug status register */
885 embeddedice_read_reg(dbg_stat
);
886 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
891 if (buf_get_u32(dbg_stat
->value
, EICE_DBG_STATUS_DBGACK
, 1))
893 /* LOG_DEBUG("DBGACK set, dbg_state->value: 0x%x", buf_get_u32(dbg_stat->value, 0, 32));*/
894 if (target
->state
== TARGET_UNKNOWN
)
896 /* Starting OpenOCD with target in debug-halt */
897 target
->state
= TARGET_RUNNING
;
898 LOG_DEBUG("DBGACK already set during server startup.");
900 if ((target
->state
== TARGET_RUNNING
) || (target
->state
== TARGET_RESET
))
902 target
->state
= TARGET_HALTED
;
904 if ((retval
= arm7_9_debug_entry(target
)) != ERROR_OK
)
907 if (arm_semihosting(target
, &retval
) != 0)
910 if ((retval
= target_call_event_callbacks(target
, TARGET_EVENT_HALTED
)) != ERROR_OK
)
915 if (target
->state
== TARGET_DEBUG_RUNNING
)
917 target
->state
= TARGET_HALTED
;
918 if ((retval
= arm7_9_debug_entry(target
)) != ERROR_OK
)
921 if ((retval
= target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_HALTED
)) != ERROR_OK
)
926 if (target
->state
!= TARGET_HALTED
)
928 LOG_WARNING("DBGACK set, but the target did not end up in the halted state %d", target
->state
);
933 if (target
->state
!= TARGET_DEBUG_RUNNING
)
934 target
->state
= TARGET_RUNNING
;
941 * Asserts the reset (SRST) on an ARM7/9 target. Some -S targets (ARM966E-S in
942 * the STR912 isn't affected, ARM926EJ-S in the LPC3180 and AT91SAM9260 is
943 * affected) completely stop the JTAG clock while the core is held in reset
944 * (SRST). It isn't possible to program the halt condition once reset is
945 * asserted, hence a hook that allows the target to set up its reset-halt
946 * condition is setup prior to asserting reset.
948 * @param target Pointer to an ARM7/9 target to assert reset on
949 * @return ERROR_FAIL if the JTAG device does not have SRST, otherwise ERROR_OK
951 int arm7_9_assert_reset(struct target
*target
)
953 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
954 enum reset_types jtag_reset_config
= jtag_get_reset_config();
955 bool use_event
= false;
957 LOG_DEBUG("target->state: %s",
958 target_state_name(target
));
960 if (target_has_event_action(target
, TARGET_EVENT_RESET_ASSERT
))
962 else if (!(jtag_reset_config
& RESET_HAS_SRST
)) {
963 LOG_ERROR("%s: how to reset?", target_name(target
));
967 /* At this point trst has been asserted/deasserted once. We would
968 * like to program EmbeddedICE while SRST is asserted, instead of
969 * depending on SRST to leave that module alone. However, many CPUs
970 * gate the JTAG clock while SRST is asserted; or JTAG may need
971 * clock stability guarantees (adaptive clocking might help).
973 * So we assume JTAG access during SRST is off the menu unless it's
974 * been specifically enabled.
976 bool srst_asserted
= false;
979 && !(jtag_reset_config
& RESET_SRST_PULLS_TRST
)
980 && (jtag_reset_config
& RESET_SRST_NO_GATING
))
982 jtag_add_reset(0, 1);
983 srst_asserted
= true;
986 if (target
->reset_halt
)
989 * For targets that don't support communication while SRST is
990 * asserted, we need to set up the reset vector catch first.
992 * When we use TRST+SRST and that's equivalent to a power-up
993 * reset, these settings may well be reset anyway; so setting
994 * them here won't matter.
996 if (arm7_9
->has_vector_catch
)
998 /* program vector catch register to catch reset */
999 embeddedice_write_reg(&arm7_9
->eice_cache
1000 ->reg_list
[EICE_VEC_CATCH
], 0x1);
1002 /* extra runtest added as issues were found with
1003 * certain ARM9 cores (maybe more) - AT91SAM9260
1006 jtag_add_runtest(1, TAP_IDLE
);
1010 /* program watchpoint unit to match on reset vector
1013 embeddedice_write_reg(&arm7_9
->eice_cache
1014 ->reg_list
[EICE_W0_ADDR_VALUE
], 0x0);
1015 embeddedice_write_reg(&arm7_9
->eice_cache
1016 ->reg_list
[EICE_W0_ADDR_MASK
], 0x3);
1017 embeddedice_write_reg(&arm7_9
->eice_cache
1018 ->reg_list
[EICE_W0_DATA_MASK
],
1020 embeddedice_write_reg(&arm7_9
->eice_cache
1021 ->reg_list
[EICE_W0_CONTROL_VALUE
],
1022 EICE_W_CTRL_ENABLE
);
1023 embeddedice_write_reg(&arm7_9
->eice_cache
1024 ->reg_list
[EICE_W0_CONTROL_MASK
],
1025 ~EICE_W_CTRL_nOPC
& 0xff);
1030 target_handle_event(target
, TARGET_EVENT_RESET_ASSERT
);
1032 /* If we use SRST ... we'd like to issue just SRST, but the
1033 * board or chip may be set up so we have to assert TRST as
1034 * well. On some chips that combination is equivalent to a
1035 * power-up reset, and generally clobbers EICE state.
1037 if (jtag_reset_config
& RESET_SRST_PULLS_TRST
)
1038 jtag_add_reset(1, 1);
1039 else if (!srst_asserted
)
1040 jtag_add_reset(0, 1);
1041 jtag_add_sleep(50000);
1044 target
->state
= TARGET_RESET
;
1045 register_cache_invalidate(arm7_9
->armv4_5_common
.core_cache
);
1047 /* REVISIT why isn't standard debug entry logic sufficient?? */
1048 if (target
->reset_halt
1049 && (!(jtag_reset_config
& RESET_SRST_PULLS_TRST
)
1052 /* debug entry was prepared above */
1053 target
->debug_reason
= DBG_REASON_DBGRQ
;
1060 * Deassert the reset (SRST) signal on an ARM7/9 target. If SRST pulls TRST
1061 * and the target is being reset into a halt, a warning will be triggered
1062 * because it is not possible to reset into a halted mode in this case. The
1063 * target is halted using the target's functions.
1065 * @param target Pointer to the target to have the reset deasserted
1066 * @return ERROR_OK or an error from polling or halting the target
1068 int arm7_9_deassert_reset(struct target
*target
)
1070 int retval
= ERROR_OK
;
1071 LOG_DEBUG("target->state: %s",
1072 target_state_name(target
));
1074 /* deassert reset lines */
1075 jtag_add_reset(0, 0);
1077 /* In case polling is disabled, we need to examine the
1078 * target and poll here for this target to work correctly.
1080 * Otherwise, e.g. halt will fail afterwards with bogus
1081 * error messages as halt will believe that reset is
1084 if ((retval
= target_examine_one(target
)) != ERROR_OK
)
1087 if ((retval
= target_poll(target
)) != ERROR_OK
)
1092 enum reset_types jtag_reset_config
= jtag_get_reset_config();
1093 if (target
->reset_halt
&& (jtag_reset_config
& RESET_SRST_PULLS_TRST
) != 0)
1095 LOG_WARNING("srst pulls trst - can not reset into halted mode. Issuing halt after reset.");
1096 if ((retval
= target_halt(target
)) != ERROR_OK
)
1105 * Clears the halt condition for an ARM7/9 target. If it isn't coming out of
1106 * reset and if DBGRQ is used, it is progammed to be deasserted. If the reset
1107 * vector catch was used, it is restored. Otherwise, the control value is
1108 * restored and the watchpoint unit is restored if it was in use.
1110 * @param target Pointer to the ARM7/9 target to have halt cleared
1111 * @return Always ERROR_OK
1113 static int arm7_9_clear_halt(struct target
*target
)
1115 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
1116 struct reg
*dbg_ctrl
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_CTRL
];
1118 /* we used DBGRQ only if we didn't come out of reset */
1119 if (!arm7_9
->debug_entry_from_reset
&& arm7_9
->use_dbgrq
)
1121 /* program EmbeddedICE Debug Control Register to deassert DBGRQ
1123 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_DBGRQ
, 1, 0);
1124 embeddedice_store_reg(dbg_ctrl
);
1128 if (arm7_9
->debug_entry_from_reset
&& arm7_9
->has_vector_catch
)
1130 /* if we came out of reset, and vector catch is supported, we used
1131 * vector catch to enter debug state
1132 * restore the register in that case
1134 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_VEC_CATCH
]);
1138 /* restore registers if watchpoint unit 0 was in use
1140 if (arm7_9
->wp0_used
)
1142 if (arm7_9
->debug_entry_from_reset
)
1144 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_VALUE
]);
1146 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_MASK
]);
1147 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_DATA_MASK
]);
1148 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_MASK
]);
1150 /* control value always has to be restored, as it was either disabled,
1151 * or enabled with possibly different bits
1153 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
]);
1161 * Issue a software reset and halt to an ARM7/9 target. The target is halted
1162 * and then there is a wait until the processor shows the halt. This wait can
1163 * timeout and results in an error being returned. The software reset involves
1164 * clearing the halt, updating the debug control register, changing to ARM mode,
1165 * reset of the program counter, and reset of all of the registers.
1167 * @param target Pointer to the ARM7/9 target to be reset and halted by software
1168 * @return Error status if any of the commands fail, otherwise ERROR_OK
1170 int arm7_9_soft_reset_halt(struct target
*target
)
1172 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
1173 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
1174 struct reg
*dbg_stat
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_STAT
];
1175 struct reg
*dbg_ctrl
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_CTRL
];
1179 /* FIX!!! replace some of this code with tcl commands
1181 * halt # the halt command is synchronous
1182 * armv4_5 core_state arm
1186 if ((retval
= target_halt(target
)) != ERROR_OK
)
1189 long long then
= timeval_ms();
1191 while (!(timeout
= ((timeval_ms()-then
) > 1000)))
1193 if (buf_get_u32(dbg_stat
->value
, EICE_DBG_STATUS_DBGACK
, 1) != 0)
1195 embeddedice_read_reg(dbg_stat
);
1196 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1198 if (debug_level
>= 3)
1208 LOG_ERROR("Failed to halt CPU after 1 sec");
1209 return ERROR_TARGET_TIMEOUT
;
1211 target
->state
= TARGET_HALTED
;
1213 /* program EmbeddedICE Debug Control Register to assert DBGACK and INTDIS
1214 * ensure that DBGRQ is cleared
1216 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_DBGACK
, 1, 1);
1217 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_DBGRQ
, 1, 0);
1218 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_INTDIS
, 1, 1);
1219 embeddedice_store_reg(dbg_ctrl
);
1221 if ((retval
= arm7_9_clear_halt(target
)) != ERROR_OK
)
1226 /* if the target is in Thumb state, change to ARM state */
1227 if (buf_get_u32(dbg_stat
->value
, EICE_DBG_STATUS_ITBIT
, 1))
1229 uint32_t r0_thumb
, pc_thumb
;
1230 LOG_DEBUG("target entered debug from Thumb state, changing to ARM");
1231 /* Entered debug from Thumb mode */
1232 armv4_5
->core_state
= ARM_STATE_THUMB
;
1233 arm7_9
->change_to_arm(target
, &r0_thumb
, &pc_thumb
);
1236 /* REVISIT likewise for bit 5 -- switch Jazelle-to-ARM */
1238 /* all register content is now invalid */
1239 register_cache_invalidate(armv4_5
->core_cache
);
1241 /* SVC, ARM state, IRQ and FIQ disabled */
1244 cpsr
= buf_get_u32(armv4_5
->cpsr
->value
, 0, 32);
1247 arm_set_cpsr(armv4_5
, cpsr
);
1248 armv4_5
->cpsr
->dirty
= 1;
1250 /* start fetching from 0x0 */
1251 buf_set_u32(armv4_5
->pc
->value
, 0, 32, 0x0);
1252 armv4_5
->pc
->dirty
= 1;
1253 armv4_5
->pc
->valid
= 1;
1255 /* reset registers */
1256 for (i
= 0; i
<= 14; i
++)
1258 struct reg
*r
= arm_reg_current(armv4_5
, i
);
1260 buf_set_u32(r
->value
, 0, 32, 0xffffffff);
1265 if ((retval
= target_call_event_callbacks(target
, TARGET_EVENT_HALTED
)) != ERROR_OK
)
1274 * Halt an ARM7/9 target. This is accomplished by either asserting the DBGRQ
1275 * line or by programming a watchpoint to trigger on any address. It is
1276 * considered a bug to call this function while the target is in the
1277 * TARGET_RESET state.
1279 * @param target Pointer to the ARM7/9 target to be halted
1280 * @return Always ERROR_OK
1282 int arm7_9_halt(struct target
*target
)
1284 if (target
->state
== TARGET_RESET
)
1286 LOG_ERROR("BUG: arm7/9 does not support halt during reset. This is handled in arm7_9_assert_reset()");
1290 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
1291 struct reg
*dbg_ctrl
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_CTRL
];
1293 LOG_DEBUG("target->state: %s",
1294 target_state_name(target
));
1296 if (target
->state
== TARGET_HALTED
)
1298 LOG_DEBUG("target was already halted");
1302 if (target
->state
== TARGET_UNKNOWN
)
1304 LOG_WARNING("target was in unknown state when halt was requested");
1307 if (arm7_9
->use_dbgrq
)
1309 /* program EmbeddedICE Debug Control Register to assert DBGRQ
1311 if (arm7_9
->set_special_dbgrq
) {
1312 arm7_9
->set_special_dbgrq(target
);
1314 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_DBGRQ
, 1, 1);
1315 embeddedice_store_reg(dbg_ctrl
);
1320 /* program watchpoint unit to match on any address
1322 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_MASK
], 0xffffffff);
1323 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_DATA_MASK
], 0xffffffff);
1324 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
], EICE_W_CTRL_ENABLE
);
1325 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_MASK
], ~EICE_W_CTRL_nOPC
& 0xff);
1328 target
->debug_reason
= DBG_REASON_DBGRQ
;
1334 * Handle an ARM7/9 target's entry into debug mode. The halt is cleared on the
1335 * ARM. The JTAG queue is then executed and the reason for debug entry is
1336 * examined. Once done, the target is verified to be halted and the processor
1337 * is forced into ARM mode. The core registers are saved for the current core
1338 * mode and the program counter (register 15) is updated as needed. The core
1339 * registers and CPSR and SPSR are saved for restoration later.
1341 * @param target Pointer to target that is entering debug mode
1342 * @return Error code if anything fails, otherwise ERROR_OK
1344 static int arm7_9_debug_entry(struct target
*target
)
1347 uint32_t context
[16];
1348 uint32_t* context_p
[16];
1349 uint32_t r0_thumb
, pc_thumb
;
1350 uint32_t cpsr
, cpsr_mask
= 0;
1352 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
1353 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
1354 struct reg
*dbg_stat
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_STAT
];
1355 struct reg
*dbg_ctrl
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_CTRL
];
1357 #ifdef _DEBUG_ARM7_9_
1361 /* program EmbeddedICE Debug Control Register to assert DBGACK and INTDIS
1362 * ensure that DBGRQ is cleared
1364 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_DBGACK
, 1, 1);
1365 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_DBGRQ
, 1, 0);
1366 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_INTDIS
, 1, 1);
1367 embeddedice_store_reg(dbg_ctrl
);
1369 if ((retval
= arm7_9_clear_halt(target
)) != ERROR_OK
)
1374 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1379 if ((retval
= arm7_9
->examine_debug_reason(target
)) != ERROR_OK
)
1383 if (target
->state
!= TARGET_HALTED
)
1385 LOG_WARNING("target not halted");
1386 return ERROR_TARGET_NOT_HALTED
;
1389 /* if the target is in Thumb state, change to ARM state */
1390 if (buf_get_u32(dbg_stat
->value
, EICE_DBG_STATUS_ITBIT
, 1))
1392 LOG_DEBUG("target entered debug from Thumb state");
1393 /* Entered debug from Thumb mode */
1394 armv4_5
->core_state
= ARM_STATE_THUMB
;
1396 arm7_9
->change_to_arm(target
, &r0_thumb
, &pc_thumb
);
1397 LOG_DEBUG("r0_thumb: 0x%8.8" PRIx32
1398 ", pc_thumb: 0x%8.8" PRIx32
, r0_thumb
, pc_thumb
);
1399 } else if (buf_get_u32(dbg_stat
->value
, 5, 1)) {
1400 /* \todo Get some vaguely correct handling of Jazelle, if
1401 * anyone ever uses it and full info becomes available.
1402 * See ARM9EJS TRM B.7.1 for how to switch J->ARM; and
1403 * B.7.3 for the reverse. That'd be the bare minimum...
1405 LOG_DEBUG("target entered debug from Jazelle state");
1406 armv4_5
->core_state
= ARM_STATE_JAZELLE
;
1407 cpsr_mask
= 1 << 24;
1408 LOG_ERROR("Jazelle debug entry -- BROKEN!");
1410 LOG_DEBUG("target entered debug from ARM state");
1411 /* Entered debug from ARM mode */
1412 armv4_5
->core_state
= ARM_STATE_ARM
;
1415 for (i
= 0; i
< 16; i
++)
1416 context_p
[i
] = &context
[i
];
1417 /* save core registers (r0 - r15 of current core mode) */
1418 arm7_9
->read_core_regs(target
, 0xffff, context_p
);
1420 arm7_9
->read_xpsr(target
, &cpsr
, 0);
1422 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1425 /* Sync our CPSR copy with J or T bits EICE reported, but
1426 * which we then erased by putting the core into ARM mode.
1428 arm_set_cpsr(armv4_5
, cpsr
| cpsr_mask
);
1430 if (!is_arm_mode(armv4_5
->core_mode
))
1432 target
->state
= TARGET_UNKNOWN
;
1433 LOG_ERROR("cpsr contains invalid mode value - communication failure");
1434 return ERROR_TARGET_FAILURE
;
1437 LOG_DEBUG("target entered debug state in %s mode",
1438 arm_mode_name(armv4_5
->core_mode
));
1440 if (armv4_5
->core_state
== ARM_STATE_THUMB
)
1442 LOG_DEBUG("thumb state, applying fixups");
1443 context
[0] = r0_thumb
;
1444 context
[15] = pc_thumb
;
1445 } else if (armv4_5
->core_state
== ARM_STATE_ARM
)
1447 /* adjust value stored by STM */
1448 context
[15] -= 3 * 4;
1451 if ((target
->debug_reason
!= DBG_REASON_DBGRQ
) || (!arm7_9
->use_dbgrq
))
1452 context
[15] -= 3 * ((armv4_5
->core_state
== ARM_STATE_ARM
) ? 4 : 2);
1454 context
[15] -= arm7_9
->dbgreq_adjust_pc
* ((armv4_5
->core_state
== ARM_STATE_ARM
) ? 4 : 2);
1456 for (i
= 0; i
<= 15; i
++)
1458 struct reg
*r
= arm_reg_current(armv4_5
, i
);
1460 LOG_DEBUG("r%i: 0x%8.8" PRIx32
"", i
, context
[i
]);
1462 buf_set_u32(r
->value
, 0, 32, context
[i
]);
1463 /* r0 and r15 (pc) have to be restored later */
1464 r
->dirty
= (i
== 0) || (i
== 15);
1468 LOG_DEBUG("entered debug state at PC 0x%" PRIx32
"", context
[15]);
1470 /* exceptions other than USR & SYS have a saved program status register */
1471 if (armv4_5
->spsr
) {
1473 arm7_9
->read_xpsr(target
, &spsr
, 1);
1474 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1478 buf_set_u32(armv4_5
->spsr
->value
, 0, 32, spsr
);
1479 armv4_5
->spsr
->dirty
= 0;
1480 armv4_5
->spsr
->valid
= 1;
1483 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1486 if (arm7_9
->post_debug_entry
)
1488 retval
= arm7_9
->post_debug_entry(target
);
1489 if (retval
!= ERROR_OK
)
1497 * Validate the full context for an ARM7/9 target in all processor modes. If
1498 * there are any invalid registers for the target, they will all be read. This
1501 * @param target Pointer to the ARM7/9 target to capture the full context from
1502 * @return Error if the target is not halted, has an invalid core mode, or if
1503 * the JTAG queue fails to execute
1505 static int arm7_9_full_context(struct target
*target
)
1509 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
1510 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
1514 if (target
->state
!= TARGET_HALTED
)
1516 LOG_WARNING("target not halted");
1517 return ERROR_TARGET_NOT_HALTED
;
1520 if (!is_arm_mode(armv4_5
->core_mode
))
1522 LOG_ERROR("not a valid arm core mode - communication failure?");
1526 /* iterate through processor modes (User, FIQ, IRQ, SVC, ABT, UND)
1527 * SYS shares registers with User, so we don't touch SYS
1529 for (i
= 0; i
< 6; i
++)
1532 uint32_t* reg_p
[16];
1536 /* check if there are invalid registers in the current mode
1538 for (j
= 0; j
<= 16; j
++)
1540 if (ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), j
).valid
== 0)
1548 /* change processor mode (and mask T bit) */
1549 tmp_cpsr
= buf_get_u32(armv4_5
->cpsr
->value
, 0, 8)
1551 tmp_cpsr
|= armv4_5_number_to_mode(i
);
1553 arm7_9
->write_xpsr_im8(target
, tmp_cpsr
& 0xff, 0, 0);
1555 for (j
= 0; j
< 15; j
++)
1557 if (ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), j
).valid
== 0)
1559 reg_p
[j
] = (uint32_t*)ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), j
).value
;
1561 ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), j
).valid
= 1;
1562 ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), j
).dirty
= 0;
1566 /* if only the PSR is invalid, mask is all zeroes */
1568 arm7_9
->read_core_regs(target
, mask
, reg_p
);
1570 /* check if the PSR has to be read */
1571 if (ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), 16).valid
== 0)
1573 arm7_9
->read_xpsr(target
, (uint32_t*)ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), 16).value
, 1);
1574 ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), 16).valid
= 1;
1575 ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), 16).dirty
= 0;
1580 /* restore processor mode (mask T bit) */
1581 arm7_9
->write_xpsr_im8(target
,
1582 buf_get_u32(armv4_5
->cpsr
->value
, 0, 8) & ~0x20,
1585 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
1593 * Restore the processor context on an ARM7/9 target. The full processor
1594 * context is analyzed to see if any of the registers are dirty on this end, but
1595 * have a valid new value. If this is the case, the processor is changed to the
1596 * appropriate mode and the new register values are written out to the
1597 * processor. If there happens to be a dirty register with an invalid value, an
1598 * error will be logged.
1600 * @param target Pointer to the ARM7/9 target to have its context restored
1601 * @return Error status if the target is not halted or the core mode in the
1602 * armv4_5 struct is invalid.
1604 static int arm7_9_restore_context(struct target
*target
)
1606 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
1607 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
1609 struct arm_reg
*reg_arch_info
;
1610 enum arm_mode current_mode
= armv4_5
->core_mode
;
1617 if (target
->state
!= TARGET_HALTED
)
1619 LOG_WARNING("target not halted");
1620 return ERROR_TARGET_NOT_HALTED
;
1623 if (arm7_9
->pre_restore_context
)
1624 arm7_9
->pre_restore_context(target
);
1626 if (!is_arm_mode(armv4_5
->core_mode
))
1628 LOG_ERROR("not a valid arm core mode - communication failure?");
1632 /* iterate through processor modes (User, FIQ, IRQ, SVC, ABT, UND)
1633 * SYS shares registers with User, so we don't touch SYS
1635 for (i
= 0; i
< 6; i
++)
1637 LOG_DEBUG("examining %s mode",
1638 arm_mode_name(armv4_5
->core_mode
));
1641 /* check if there are dirty registers in the current mode
1643 for (j
= 0; j
<= 16; j
++)
1645 reg
= &ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), j
);
1646 reg_arch_info
= reg
->arch_info
;
1647 if (reg
->dirty
== 1)
1649 if (reg
->valid
== 1)
1652 LOG_DEBUG("examining dirty reg: %s", reg
->name
);
1653 if ((reg_arch_info
->mode
!= ARM_MODE_ANY
)
1654 && (reg_arch_info
->mode
!= current_mode
)
1655 && !((reg_arch_info
->mode
== ARM_MODE_USR
) && (armv4_5
->core_mode
== ARM_MODE_SYS
))
1656 && !((reg_arch_info
->mode
== ARM_MODE_SYS
) && (armv4_5
->core_mode
== ARM_MODE_USR
)))
1659 LOG_DEBUG("require mode change");
1664 LOG_ERROR("BUG: dirty register '%s', but no valid data", reg
->name
);
1671 uint32_t mask
= 0x0;
1679 /* change processor mode (mask T bit) */
1680 tmp_cpsr
= buf_get_u32(armv4_5
->cpsr
->value
,
1682 tmp_cpsr
|= armv4_5_number_to_mode(i
);
1684 arm7_9
->write_xpsr_im8(target
, tmp_cpsr
& 0xff, 0, 0);
1685 current_mode
= armv4_5_number_to_mode(i
);
1688 for (j
= 0; j
<= 14; j
++)
1690 reg
= &ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), j
);
1691 reg_arch_info
= reg
->arch_info
;
1694 if (reg
->dirty
== 1)
1696 regs
[j
] = buf_get_u32(reg
->value
, 0, 32);
1701 LOG_DEBUG("writing register %i mode %s "
1702 "with value 0x%8.8" PRIx32
, j
,
1703 arm_mode_name(armv4_5
->core_mode
),
1710 arm7_9
->write_core_regs(target
, mask
, regs
);
1713 reg
= &ARMV4_5_CORE_REG_MODE(armv4_5
->core_cache
, armv4_5_number_to_mode(i
), 16);
1714 reg_arch_info
= reg
->arch_info
;
1715 if ((reg
->dirty
) && (reg_arch_info
->mode
!= ARM_MODE_ANY
))
1717 LOG_DEBUG("writing SPSR of mode %i with value 0x%8.8" PRIx32
"", i
, buf_get_u32(reg
->value
, 0, 32));
1718 arm7_9
->write_xpsr(target
, buf_get_u32(reg
->value
, 0, 32), 1);
1723 if (!armv4_5
->cpsr
->dirty
&& (armv4_5
->core_mode
!= current_mode
))
1725 /* restore processor mode (mask T bit) */
1728 tmp_cpsr
= buf_get_u32(armv4_5
->cpsr
->value
, 0, 8) & 0xE0;
1729 tmp_cpsr
|= armv4_5_number_to_mode(i
);
1731 LOG_DEBUG("writing lower 8 bit of cpsr with value 0x%2.2x", (unsigned)(tmp_cpsr
));
1732 arm7_9
->write_xpsr_im8(target
, tmp_cpsr
& 0xff, 0, 0);
1734 else if (armv4_5
->cpsr
->dirty
)
1736 /* CPSR has been changed, full restore necessary (mask T bit) */
1737 LOG_DEBUG("writing cpsr with value 0x%8.8" PRIx32
,
1738 buf_get_u32(armv4_5
->cpsr
->value
, 0, 32));
1739 arm7_9
->write_xpsr(target
,
1740 buf_get_u32(armv4_5
->cpsr
->value
, 0, 32)
1742 armv4_5
->cpsr
->dirty
= 0;
1743 armv4_5
->cpsr
->valid
= 1;
1747 LOG_DEBUG("writing PC with value 0x%8.8" PRIx32
,
1748 buf_get_u32(armv4_5
->pc
->value
, 0, 32));
1749 arm7_9
->write_pc(target
, buf_get_u32(armv4_5
->pc
->value
, 0, 32));
1750 armv4_5
->pc
->dirty
= 0;
1756 * Restart the core of an ARM7/9 target. A RESTART command is sent to the
1757 * instruction register and the JTAG state is set to TAP_IDLE causing a core
1760 * @param target Pointer to the ARM7/9 target to be restarted
1761 * @return Result of executing the JTAG queue
1763 static int arm7_9_restart_core(struct target
*target
)
1765 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
1766 struct arm_jtag
*jtag_info
= &arm7_9
->jtag_info
;
1769 /* set RESTART instruction */
1770 if (arm7_9
->need_bypass_before_restart
) {
1771 arm7_9
->need_bypass_before_restart
= 0;
1773 retval
= arm_jtag_set_instr(jtag_info
, 0xf, NULL
, TAP_IDLE
);
1774 if (retval
!= ERROR_OK
)
1777 retval
= arm_jtag_set_instr(jtag_info
, 0x4, NULL
, TAP_IDLE
);
1778 if (retval
!= ERROR_OK
)
1781 jtag_add_runtest(1, TAP_IDLE
);
1782 return jtag_execute_queue();
1786 * Enable the watchpoints on an ARM7/9 target. The target's watchpoints are
1787 * iterated through and are set on the target if they aren't already set.
1789 * @param target Pointer to the ARM7/9 target to enable watchpoints on
1791 static void arm7_9_enable_watchpoints(struct target
*target
)
1793 struct watchpoint
*watchpoint
= target
->watchpoints
;
1797 if (watchpoint
->set
== 0)
1798 arm7_9_set_watchpoint(target
, watchpoint
);
1799 watchpoint
= watchpoint
->next
;
1804 * Enable the breakpoints on an ARM7/9 target. The target's breakpoints are
1805 * iterated through and are set on the target.
1807 * @param target Pointer to the ARM7/9 target to enable breakpoints on
1809 static void arm7_9_enable_breakpoints(struct target
*target
)
1811 struct breakpoint
*breakpoint
= target
->breakpoints
;
1813 /* set any pending breakpoints */
1816 arm7_9_set_breakpoint(target
, breakpoint
);
1817 breakpoint
= breakpoint
->next
;
1821 int arm7_9_resume(struct target
*target
, int current
, uint32_t address
, int handle_breakpoints
, int debug_execution
)
1823 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
1824 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
1825 struct breakpoint
*breakpoint
= target
->breakpoints
;
1826 struct reg
*dbg_ctrl
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_CTRL
];
1827 int err
, retval
= ERROR_OK
;
1831 if (target
->state
!= TARGET_HALTED
)
1833 LOG_WARNING("target not halted");
1834 return ERROR_TARGET_NOT_HALTED
;
1837 if (!debug_execution
)
1839 target_free_all_working_areas(target
);
1842 /* current = 1: continue on current pc, otherwise continue at <address> */
1844 buf_set_u32(armv4_5
->pc
->value
, 0, 32, address
);
1846 uint32_t current_pc
;
1847 current_pc
= buf_get_u32(armv4_5
->pc
->value
, 0, 32);
1849 /* the front-end may request us not to handle breakpoints */
1850 if (handle_breakpoints
)
1852 breakpoint
= breakpoint_find(target
,
1853 buf_get_u32(armv4_5
->pc
->value
, 0, 32));
1854 if (breakpoint
!= NULL
)
1856 LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32
" (id: %d)", breakpoint
->address
, breakpoint
->unique_id
);
1857 if ((retval
= arm7_9_unset_breakpoint(target
, breakpoint
)) != ERROR_OK
)
1862 /* calculate PC of next instruction */
1864 if ((retval
= arm_simulate_step(target
, &next_pc
)) != ERROR_OK
)
1866 uint32_t current_opcode
;
1867 target_read_u32(target
, current_pc
, ¤t_opcode
);
1868 LOG_ERROR("Couldn't calculate PC of next instruction, current opcode was 0x%8.8" PRIx32
"", current_opcode
);
1872 LOG_DEBUG("enable single-step");
1873 arm7_9
->enable_single_step(target
, next_pc
);
1875 target
->debug_reason
= DBG_REASON_SINGLESTEP
;
1877 if ((retval
= arm7_9_restore_context(target
)) != ERROR_OK
)
1882 if (armv4_5
->core_state
== ARM_STATE_ARM
)
1883 arm7_9
->branch_resume(target
);
1884 else if (armv4_5
->core_state
== ARM_STATE_THUMB
)
1886 arm7_9
->branch_resume_thumb(target
);
1890 LOG_ERROR("unhandled core state");
1894 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_DBGACK
, 1, 0);
1895 embeddedice_write_reg(dbg_ctrl
, buf_get_u32(dbg_ctrl
->value
, 0, dbg_ctrl
->size
));
1896 err
= arm7_9_execute_sys_speed(target
);
1898 LOG_DEBUG("disable single-step");
1899 arm7_9
->disable_single_step(target
);
1901 if (err
!= ERROR_OK
)
1903 if ((retval
= arm7_9_set_breakpoint(target
, breakpoint
)) != ERROR_OK
)
1907 target
->state
= TARGET_UNKNOWN
;
1911 retval
= arm7_9_debug_entry(target
);
1912 if (retval
!= ERROR_OK
)
1914 LOG_DEBUG("new PC after step: 0x%8.8" PRIx32
,
1915 buf_get_u32(armv4_5
->pc
->value
, 0, 32));
1917 LOG_DEBUG("set breakpoint at 0x%8.8" PRIx32
"", breakpoint
->address
);
1918 if ((retval
= arm7_9_set_breakpoint(target
, breakpoint
)) != ERROR_OK
)
1925 /* enable any pending breakpoints and watchpoints */
1926 arm7_9_enable_breakpoints(target
);
1927 arm7_9_enable_watchpoints(target
);
1929 if ((retval
= arm7_9_restore_context(target
)) != ERROR_OK
)
1934 if (armv4_5
->core_state
== ARM_STATE_ARM
)
1936 arm7_9
->branch_resume(target
);
1938 else if (armv4_5
->core_state
== ARM_STATE_THUMB
)
1940 arm7_9
->branch_resume_thumb(target
);
1944 LOG_ERROR("unhandled core state");
1948 /* deassert DBGACK and INTDIS */
1949 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_DBGACK
, 1, 0);
1950 /* INTDIS only when we really resume, not during debug execution */
1951 if (!debug_execution
)
1952 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_INTDIS
, 1, 0);
1953 embeddedice_write_reg(dbg_ctrl
, buf_get_u32(dbg_ctrl
->value
, 0, dbg_ctrl
->size
));
1955 if ((retval
= arm7_9_restart_core(target
)) != ERROR_OK
)
1960 target
->debug_reason
= DBG_REASON_NOTHALTED
;
1962 if (!debug_execution
)
1964 /* registers are now invalid */
1965 register_cache_invalidate(armv4_5
->core_cache
);
1966 target
->state
= TARGET_RUNNING
;
1967 if ((retval
= target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
)) != ERROR_OK
)
1974 target
->state
= TARGET_DEBUG_RUNNING
;
1975 if ((retval
= target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_RESUMED
)) != ERROR_OK
)
1981 LOG_DEBUG("target resumed");
1986 void arm7_9_enable_eice_step(struct target
*target
, uint32_t next_pc
)
1988 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
1989 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
1990 uint32_t current_pc
;
1991 current_pc
= buf_get_u32(armv4_5
->pc
->value
, 0, 32);
1993 if (next_pc
!= current_pc
)
1995 /* setup an inverse breakpoint on the current PC
1996 * - comparator 1 matches the current address
1997 * - rangeout from comparator 1 is connected to comparator 0 rangein
1998 * - comparator 0 matches any address, as long as rangein is low */
1999 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_MASK
], 0xffffffff);
2000 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_DATA_MASK
], 0xffffffff);
2001 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
], EICE_W_CTRL_ENABLE
);
2002 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_MASK
], ~(EICE_W_CTRL_RANGE
| EICE_W_CTRL_nOPC
) & 0xff);
2003 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_VALUE
], current_pc
);
2004 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_MASK
], 0);
2005 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_DATA_MASK
], 0xffffffff);
2006 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_VALUE
], 0x0);
2007 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_MASK
], ~EICE_W_CTRL_nOPC
& 0xff);
2011 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_MASK
], 0xffffffff);
2012 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_DATA_MASK
], 0xffffffff);
2013 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
], 0x0);
2014 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_MASK
], 0xff);
2015 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_VALUE
], next_pc
);
2016 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_MASK
], 0);
2017 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_DATA_MASK
], 0xffffffff);
2018 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_VALUE
], EICE_W_CTRL_ENABLE
);
2019 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_MASK
], ~EICE_W_CTRL_nOPC
& 0xff);
2023 void arm7_9_disable_eice_step(struct target
*target
)
2025 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2027 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_ADDR_MASK
]);
2028 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_DATA_MASK
]);
2029 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_VALUE
]);
2030 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W0_CONTROL_MASK
]);
2031 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_VALUE
]);
2032 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_ADDR_MASK
]);
2033 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_DATA_MASK
]);
2034 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_MASK
]);
2035 embeddedice_store_reg(&arm7_9
->eice_cache
->reg_list
[EICE_W1_CONTROL_VALUE
]);
2038 int arm7_9_step(struct target
*target
, int current
, uint32_t address
, int handle_breakpoints
)
2040 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2041 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
2042 struct breakpoint
*breakpoint
= NULL
;
2045 if (target
->state
!= TARGET_HALTED
)
2047 LOG_WARNING("target not halted");
2048 return ERROR_TARGET_NOT_HALTED
;
2051 /* current = 1: continue on current pc, otherwise continue at <address> */
2053 buf_set_u32(armv4_5
->pc
->value
, 0, 32, address
);
2055 uint32_t current_pc
= buf_get_u32(armv4_5
->pc
->value
, 0, 32);
2057 /* the front-end may request us not to handle breakpoints */
2058 if (handle_breakpoints
)
2059 breakpoint
= breakpoint_find(target
, current_pc
);
2060 if (breakpoint
!= NULL
) {
2061 retval
= arm7_9_unset_breakpoint(target
, breakpoint
);
2062 if (retval
!= ERROR_OK
)
2066 target
->debug_reason
= DBG_REASON_SINGLESTEP
;
2068 /* calculate PC of next instruction */
2070 if ((retval
= arm_simulate_step(target
, &next_pc
)) != ERROR_OK
)
2072 uint32_t current_opcode
;
2073 target_read_u32(target
, current_pc
, ¤t_opcode
);
2074 LOG_ERROR("Couldn't calculate PC of next instruction, current opcode was 0x%8.8" PRIx32
"", current_opcode
);
2078 if ((retval
= arm7_9_restore_context(target
)) != ERROR_OK
)
2083 arm7_9
->enable_single_step(target
, next_pc
);
2085 if (armv4_5
->core_state
== ARM_STATE_ARM
)
2087 arm7_9
->branch_resume(target
);
2089 else if (armv4_5
->core_state
== ARM_STATE_THUMB
)
2091 arm7_9
->branch_resume_thumb(target
);
2095 LOG_ERROR("unhandled core state");
2099 if ((retval
= target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
)) != ERROR_OK
)
2104 err
= arm7_9_execute_sys_speed(target
);
2105 arm7_9
->disable_single_step(target
);
2107 /* registers are now invalid */
2108 register_cache_invalidate(armv4_5
->core_cache
);
2110 if (err
!= ERROR_OK
)
2112 target
->state
= TARGET_UNKNOWN
;
2114 retval
= arm7_9_debug_entry(target
);
2115 if (retval
!= ERROR_OK
)
2117 if ((retval
= target_call_event_callbacks(target
, TARGET_EVENT_HALTED
)) != ERROR_OK
)
2121 LOG_DEBUG("target stepped");
2125 if ((retval
= arm7_9_set_breakpoint(target
, breakpoint
)) != ERROR_OK
)
2133 static int arm7_9_read_core_reg(struct target
*target
, struct reg
*r
,
2134 int num
, enum arm_mode mode
)
2136 uint32_t* reg_p
[16];
2139 struct arm_reg
*areg
= r
->arch_info
;
2140 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2141 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
2143 if (!is_arm_mode(armv4_5
->core_mode
))
2145 if ((num
< 0) || (num
> 16))
2146 return ERROR_INVALID_ARGUMENTS
;
2148 if ((mode
!= ARM_MODE_ANY
)
2149 && (mode
!= armv4_5
->core_mode
)
2150 && (areg
->mode
!= ARM_MODE_ANY
))
2154 /* change processor mode (mask T bit) */
2155 tmp_cpsr
= buf_get_u32(armv4_5
->cpsr
->value
, 0, 8) & 0xE0;
2158 arm7_9
->write_xpsr_im8(target
, tmp_cpsr
& 0xff, 0, 0);
2161 if ((num
>= 0) && (num
<= 15))
2163 /* read a normal core register */
2164 reg_p
[num
] = &value
;
2166 arm7_9
->read_core_regs(target
, 1 << num
, reg_p
);
2170 /* read a program status register
2171 * if the register mode is MODE_ANY, we read the cpsr, otherwise a spsr
2173 arm7_9
->read_xpsr(target
, &value
, areg
->mode
!= ARM_MODE_ANY
);
2176 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
2183 buf_set_u32(r
->value
, 0, 32, value
);
2185 if ((mode
!= ARM_MODE_ANY
)
2186 && (mode
!= armv4_5
->core_mode
)
2187 && (areg
->mode
!= ARM_MODE_ANY
)) {
2188 /* restore processor mode (mask T bit) */
2189 arm7_9
->write_xpsr_im8(target
,
2190 buf_get_u32(armv4_5
->cpsr
->value
, 0, 8)
2197 static int arm7_9_write_core_reg(struct target
*target
, struct reg
*r
,
2198 int num
, enum arm_mode mode
, uint32_t value
)
2201 struct arm_reg
*areg
= r
->arch_info
;
2202 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2203 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
2205 if (!is_arm_mode(armv4_5
->core_mode
))
2207 if ((num
< 0) || (num
> 16))
2208 return ERROR_INVALID_ARGUMENTS
;
2210 if ((mode
!= ARM_MODE_ANY
)
2211 && (mode
!= armv4_5
->core_mode
)
2212 && (areg
->mode
!= ARM_MODE_ANY
)) {
2215 /* change processor mode (mask T bit) */
2216 tmp_cpsr
= buf_get_u32(armv4_5
->cpsr
->value
, 0, 8) & 0xE0;
2219 arm7_9
->write_xpsr_im8(target
, tmp_cpsr
& 0xff, 0, 0);
2222 if ((num
>= 0) && (num
<= 15))
2224 /* write a normal core register */
2227 arm7_9
->write_core_regs(target
, 1 << num
, reg
);
2231 /* write a program status register
2232 * if the register mode is MODE_ANY, we write the cpsr, otherwise a spsr
2234 int spsr
= (areg
->mode
!= ARM_MODE_ANY
);
2236 /* if we're writing the CPSR, mask the T bit */
2240 arm7_9
->write_xpsr(target
, value
, spsr
);
2246 if ((mode
!= ARM_MODE_ANY
)
2247 && (mode
!= armv4_5
->core_mode
)
2248 && (areg
->mode
!= ARM_MODE_ANY
)) {
2249 /* restore processor mode (mask T bit) */
2250 arm7_9
->write_xpsr_im8(target
,
2251 buf_get_u32(armv4_5
->cpsr
->value
, 0, 8)
2255 return jtag_execute_queue();
2258 int arm7_9_read_memory(struct target
*target
, uint32_t address
, uint32_t size
, uint32_t count
, uint8_t *buffer
)
2260 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2261 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
2263 uint32_t num_accesses
= 0;
2264 int thisrun_accesses
;
2270 LOG_DEBUG("address: 0x%8.8" PRIx32
", size: 0x%8.8" PRIx32
", count: 0x%8.8" PRIx32
"", address
, size
, count
);
2272 if (target
->state
!= TARGET_HALTED
)
2274 LOG_WARNING("target not halted");
2275 return ERROR_TARGET_NOT_HALTED
;
2278 /* sanitize arguments */
2279 if (((size
!= 4) && (size
!= 2) && (size
!= 1)) || (count
== 0) || !(buffer
))
2280 return ERROR_INVALID_ARGUMENTS
;
2282 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
2283 return ERROR_TARGET_UNALIGNED_ACCESS
;
2285 /* load the base register with the address of the first word */
2287 arm7_9
->write_core_regs(target
, 0x1, reg
);
2294 while (num_accesses
< count
)
2297 thisrun_accesses
= ((count
- num_accesses
) >= 14) ? 14 : (count
- num_accesses
);
2298 reg_list
= (0xffff >> (15 - thisrun_accesses
)) & 0xfffe;
2300 if (last_reg
<= thisrun_accesses
)
2301 last_reg
= thisrun_accesses
;
2303 arm7_9
->load_word_regs(target
, reg_list
);
2305 /* fast memory reads are only safe when the target is running
2306 * from a sufficiently high clock (32 kHz is usually too slow)
2308 if (arm7_9
->fast_memory_access
)
2309 retval
= arm7_9_execute_fast_sys_speed(target
);
2311 retval
= arm7_9_execute_sys_speed(target
);
2312 if (retval
!= ERROR_OK
)
2315 arm7_9
->read_core_regs_target_buffer(target
, reg_list
, buffer
, 4);
2317 /* advance buffer, count number of accesses */
2318 buffer
+= thisrun_accesses
* 4;
2319 num_accesses
+= thisrun_accesses
;
2321 if ((j
++%1024) == 0)
2328 while (num_accesses
< count
)
2331 thisrun_accesses
= ((count
- num_accesses
) >= 14) ? 14 : (count
- num_accesses
);
2332 reg_list
= (0xffff >> (15 - thisrun_accesses
)) & 0xfffe;
2334 for (i
= 1; i
<= thisrun_accesses
; i
++)
2338 arm7_9
->load_hword_reg(target
, i
);
2339 /* fast memory reads are only safe when the target is running
2340 * from a sufficiently high clock (32 kHz is usually too slow)
2342 if (arm7_9
->fast_memory_access
)
2343 retval
= arm7_9_execute_fast_sys_speed(target
);
2345 retval
= arm7_9_execute_sys_speed(target
);
2346 if (retval
!= ERROR_OK
)
2353 arm7_9
->read_core_regs_target_buffer(target
, reg_list
, buffer
, 2);
2355 /* advance buffer, count number of accesses */
2356 buffer
+= thisrun_accesses
* 2;
2357 num_accesses
+= thisrun_accesses
;
2359 if ((j
++%1024) == 0)
2366 while (num_accesses
< count
)
2369 thisrun_accesses
= ((count
- num_accesses
) >= 14) ? 14 : (count
- num_accesses
);
2370 reg_list
= (0xffff >> (15 - thisrun_accesses
)) & 0xfffe;
2372 for (i
= 1; i
<= thisrun_accesses
; i
++)
2376 arm7_9
->load_byte_reg(target
, i
);
2377 /* fast memory reads are only safe when the target is running
2378 * from a sufficiently high clock (32 kHz is usually too slow)
2380 if (arm7_9
->fast_memory_access
)
2381 retval
= arm7_9_execute_fast_sys_speed(target
);
2383 retval
= arm7_9_execute_sys_speed(target
);
2384 if (retval
!= ERROR_OK
)
2390 arm7_9
->read_core_regs_target_buffer(target
, reg_list
, buffer
, 1);
2392 /* advance buffer, count number of accesses */
2393 buffer
+= thisrun_accesses
* 1;
2394 num_accesses
+= thisrun_accesses
;
2396 if ((j
++%1024) == 0)
2404 if (!is_arm_mode(armv4_5
->core_mode
))
2407 for (i
= 0; i
<= last_reg
; i
++) {
2408 struct reg
*r
= arm_reg_current(armv4_5
, i
);
2410 r
->dirty
= r
->valid
;
2413 arm7_9
->read_xpsr(target
, &cpsr
, 0);
2414 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
2416 LOG_ERROR("JTAG error while reading cpsr");
2417 return ERROR_TARGET_DATA_ABORT
;
2420 if (((cpsr
& 0x1f) == ARM_MODE_ABT
) && (armv4_5
->core_mode
!= ARM_MODE_ABT
))
2422 LOG_WARNING("memory read caused data abort (address: 0x%8.8" PRIx32
", size: 0x%" PRIx32
", count: 0x%" PRIx32
")", address
, size
, count
);
2424 arm7_9
->write_xpsr_im8(target
,
2425 buf_get_u32(armv4_5
->cpsr
->value
, 0, 8)
2428 return ERROR_TARGET_DATA_ABORT
;
2434 int arm7_9_write_memory(struct target
*target
, uint32_t address
, uint32_t size
, uint32_t count
, uint8_t *buffer
)
2436 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2437 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
2438 struct reg
*dbg_ctrl
= &arm7_9
->eice_cache
->reg_list
[EICE_DBG_CTRL
];
2441 uint32_t num_accesses
= 0;
2442 int thisrun_accesses
;
2448 #ifdef _DEBUG_ARM7_9_
2449 LOG_DEBUG("address: 0x%8.8x, size: 0x%8.8x, count: 0x%8.8x", address
, size
, count
);
2452 if (target
->state
!= TARGET_HALTED
)
2454 LOG_WARNING("target not halted");
2455 return ERROR_TARGET_NOT_HALTED
;
2458 /* sanitize arguments */
2459 if (((size
!= 4) && (size
!= 2) && (size
!= 1)) || (count
== 0) || !(buffer
))
2460 return ERROR_INVALID_ARGUMENTS
;
2462 if (((size
== 4) && (address
& 0x3u
)) || ((size
== 2) && (address
& 0x1u
)))
2463 return ERROR_TARGET_UNALIGNED_ACCESS
;
2465 /* load the base register with the address of the first word */
2467 arm7_9
->write_core_regs(target
, 0x1, reg
);
2469 /* Clear DBGACK, to make sure memory fetches work as expected */
2470 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_DBGACK
, 1, 0);
2471 embeddedice_store_reg(dbg_ctrl
);
2476 while (num_accesses
< count
)
2479 thisrun_accesses
= ((count
- num_accesses
) >= 14) ? 14 : (count
- num_accesses
);
2480 reg_list
= (0xffff >> (15 - thisrun_accesses
)) & 0xfffe;
2482 for (i
= 1; i
<= thisrun_accesses
; i
++)
2486 reg
[i
] = target_buffer_get_u32(target
, buffer
);
2490 arm7_9
->write_core_regs(target
, reg_list
, reg
);
2492 arm7_9
->store_word_regs(target
, reg_list
);
2494 /* fast memory writes are only safe when the target is running
2495 * from a sufficiently high clock (32 kHz is usually too slow)
2497 if (arm7_9
->fast_memory_access
)
2498 retval
= arm7_9_execute_fast_sys_speed(target
);
2501 retval
= arm7_9_execute_sys_speed(target
);
2504 * if memory writes are made when the clock is running slow
2505 * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
2506 * processor operations after a "reset halt" or "reset init",
2507 * need to immediately stroke the keep alive or will end up with
2508 * gdb "keep alive not sent error message" problem.
2514 if (retval
!= ERROR_OK
)
2519 num_accesses
+= thisrun_accesses
;
2523 while (num_accesses
< count
)
2526 thisrun_accesses
= ((count
- num_accesses
) >= 14) ? 14 : (count
- num_accesses
);
2527 reg_list
= (0xffff >> (15 - thisrun_accesses
)) & 0xfffe;
2529 for (i
= 1; i
<= thisrun_accesses
; i
++)
2533 reg
[i
] = target_buffer_get_u16(target
, buffer
) & 0xffff;
2537 arm7_9
->write_core_regs(target
, reg_list
, reg
);
2539 for (i
= 1; i
<= thisrun_accesses
; i
++)
2541 arm7_9
->store_hword_reg(target
, i
);
2543 /* fast memory writes are only safe when the target is running
2544 * from a sufficiently high clock (32 kHz is usually too slow)
2546 if (arm7_9
->fast_memory_access
)
2547 retval
= arm7_9_execute_fast_sys_speed(target
);
2550 retval
= arm7_9_execute_sys_speed(target
);
2553 * if memory writes are made when the clock is running slow
2554 * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
2555 * processor operations after a "reset halt" or "reset init",
2556 * need to immediately stroke the keep alive or will end up with
2557 * gdb "keep alive not sent error message" problem.
2563 if (retval
!= ERROR_OK
)
2569 num_accesses
+= thisrun_accesses
;
2573 while (num_accesses
< count
)
2576 thisrun_accesses
= ((count
- num_accesses
) >= 14) ? 14 : (count
- num_accesses
);
2577 reg_list
= (0xffff >> (15 - thisrun_accesses
)) & 0xfffe;
2579 for (i
= 1; i
<= thisrun_accesses
; i
++)
2583 reg
[i
] = *buffer
++ & 0xff;
2586 arm7_9
->write_core_regs(target
, reg_list
, reg
);
2588 for (i
= 1; i
<= thisrun_accesses
; i
++)
2590 arm7_9
->store_byte_reg(target
, i
);
2591 /* fast memory writes are only safe when the target is running
2592 * from a sufficiently high clock (32 kHz is usually too slow)
2594 if (arm7_9
->fast_memory_access
)
2595 retval
= arm7_9_execute_fast_sys_speed(target
);
2598 retval
= arm7_9_execute_sys_speed(target
);
2601 * if memory writes are made when the clock is running slow
2602 * (i.e. 32 kHz) which is necessary in some scripts to reconfigure
2603 * processor operations after a "reset halt" or "reset init",
2604 * need to immediately stroke the keep alive or will end up with
2605 * gdb "keep alive not sent error message" problem.
2611 if (retval
!= ERROR_OK
)
2618 num_accesses
+= thisrun_accesses
;
2624 buf_set_u32(dbg_ctrl
->value
, EICE_DBG_CONTROL_DBGACK
, 1, 1);
2625 embeddedice_store_reg(dbg_ctrl
);
2627 if (!is_arm_mode(armv4_5
->core_mode
))
2630 for (i
= 0; i
<= last_reg
; i
++) {
2631 struct reg
*r
= arm_reg_current(armv4_5
, i
);
2633 r
->dirty
= r
->valid
;
2636 arm7_9
->read_xpsr(target
, &cpsr
, 0);
2637 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
2639 LOG_ERROR("JTAG error while reading cpsr");
2640 return ERROR_TARGET_DATA_ABORT
;
2643 if (((cpsr
& 0x1f) == ARM_MODE_ABT
) && (armv4_5
->core_mode
!= ARM_MODE_ABT
))
2645 LOG_WARNING("memory write caused data abort (address: 0x%8.8" PRIx32
", size: 0x%" PRIx32
", count: 0x%" PRIx32
")", address
, size
, count
);
2647 arm7_9
->write_xpsr_im8(target
,
2648 buf_get_u32(armv4_5
->cpsr
->value
, 0, 8)
2651 return ERROR_TARGET_DATA_ABORT
;
2657 static int dcc_count
;
2658 static uint8_t *dcc_buffer
;
2660 static int arm7_9_dcc_completion(struct target
*target
, uint32_t exit_point
, int timeout_ms
, void *arch_info
)
2662 int retval
= ERROR_OK
;
2663 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2665 if ((retval
= target_wait_state(target
, TARGET_DEBUG_RUNNING
, 500)) != ERROR_OK
)
2668 int little
= target
->endianness
== TARGET_LITTLE_ENDIAN
;
2669 int count
= dcc_count
;
2670 uint8_t *buffer
= dcc_buffer
;
2673 /* Handle first & last using standard embeddedice_write_reg and the middle ones w/the
2674 * core function repeated. */
2675 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_COMMS_DATA
], fast_target_buffer_get_u32(buffer
, little
));
2678 struct embeddedice_reg
*ice_reg
= arm7_9
->eice_cache
->reg_list
[EICE_COMMS_DATA
].arch_info
;
2679 uint8_t reg_addr
= ice_reg
->addr
& 0x1f;
2680 struct jtag_tap
*tap
;
2681 tap
= ice_reg
->jtag_info
->tap
;
2683 embeddedice_write_dcc(tap
, reg_addr
, buffer
, little
, count
-2);
2684 buffer
+= (count
-2)*4;
2686 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_COMMS_DATA
], fast_target_buffer_get_u32(buffer
, little
));
2690 for (i
= 0; i
< count
; i
++)
2692 embeddedice_write_reg(&arm7_9
->eice_cache
->reg_list
[EICE_COMMS_DATA
], fast_target_buffer_get_u32(buffer
, little
));
2697 if ((retval
= target_halt(target
))!= ERROR_OK
)
2701 return target_wait_state(target
, TARGET_HALTED
, 500);
2704 static const uint32_t dcc_code
[] =
2706 /* r0 == input, points to memory buffer
2710 /* spin until DCC control (c0) reports data arrived */
2711 0xee101e10, /* w: mrc p14, #0, r1, c0, c0 */
2712 0xe3110001, /* tst r1, #1 */
2713 0x0afffffc, /* bne w */
2715 /* read word from DCC (c1), write to memory */
2716 0xee111e10, /* mrc p14, #0, r1, c1, c0 */
2717 0xe4801004, /* str r1, [r0], #4 */
2720 0xeafffff9 /* b w */
2723 int arm7_9_bulk_write_memory(struct target
*target
, uint32_t address
, uint32_t count
, uint8_t *buffer
)
2726 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2729 if (!arm7_9
->dcc_downloads
)
2730 return target_write_memory(target
, address
, 4, count
, buffer
);
2732 /* regrab previously allocated working_area, or allocate a new one */
2733 if (!arm7_9
->dcc_working_area
)
2735 uint8_t dcc_code_buf
[6 * 4];
2737 /* make sure we have a working area */
2738 if (target_alloc_working_area(target
, 24, &arm7_9
->dcc_working_area
) != ERROR_OK
)
2740 LOG_INFO("no working area available, falling back to memory writes");
2741 return target_write_memory(target
, address
, 4, count
, buffer
);
2744 /* copy target instructions to target endianness */
2745 for (i
= 0; i
< 6; i
++)
2747 target_buffer_set_u32(target
, dcc_code_buf
+ i
*4, dcc_code
[i
]);
2750 /* write DCC code to working area */
2751 if ((retval
= target_write_memory(target
, arm7_9
->dcc_working_area
->address
, 4, 6, dcc_code_buf
)) != ERROR_OK
)
2757 struct arm_algorithm armv4_5_info
;
2758 struct reg_param reg_params
[1];
2760 armv4_5_info
.common_magic
= ARM_COMMON_MAGIC
;
2761 armv4_5_info
.core_mode
= ARM_MODE_SVC
;
2762 armv4_5_info
.core_state
= ARM_STATE_ARM
;
2764 init_reg_param(®_params
[0], "r0", 32, PARAM_IN_OUT
);
2766 buf_set_u32(reg_params
[0].value
, 0, 32, address
);
2769 dcc_buffer
= buffer
;
2770 retval
= armv4_5_run_algorithm_inner(target
, 0, NULL
, 1, reg_params
,
2771 arm7_9
->dcc_working_area
->address
,
2772 arm7_9
->dcc_working_area
->address
+ 6*4,
2773 20*1000, &armv4_5_info
, arm7_9_dcc_completion
);
2775 if (retval
== ERROR_OK
)
2777 uint32_t endaddress
= buf_get_u32(reg_params
[0].value
, 0, 32);
2778 if (endaddress
!= (address
+ count
*4))
2780 LOG_ERROR("DCC write failed, expected end address 0x%08" PRIx32
" got 0x%0" PRIx32
"", (address
+ count
*4), endaddress
);
2781 retval
= ERROR_FAIL
;
2785 destroy_reg_param(®_params
[0]);
2791 * Perform per-target setup that requires JTAG access.
2793 int arm7_9_examine(struct target
*target
)
2795 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2798 if (!target_was_examined(target
)) {
2799 struct reg_cache
*t
, **cache_p
;
2801 t
= embeddedice_build_reg_cache(target
, arm7_9
);
2805 cache_p
= register_get_last_cache_p(&target
->reg_cache
);
2807 arm7_9
->eice_cache
= (*cache_p
);
2809 if (arm7_9
->armv4_5_common
.etm
)
2810 (*cache_p
)->next
= etm_build_reg_cache(target
,
2812 arm7_9
->armv4_5_common
.etm
);
2814 target_set_examined(target
);
2817 retval
= embeddedice_setup(target
);
2818 if (retval
== ERROR_OK
)
2819 retval
= arm7_9_setup(target
);
2820 if (retval
== ERROR_OK
&& arm7_9
->armv4_5_common
.etm
)
2821 retval
= etm_setup(target
);
2826 int arm7_9_check_reset(struct target
*target
)
2828 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2830 if (get_target_reset_nag() && !arm7_9
->dcc_downloads
)
2832 LOG_WARNING("NOTE! DCC downloads have not been enabled, defaulting to slow memory writes. Type 'help dcc'.");
2835 if (get_target_reset_nag() && (target
->working_area_size
== 0))
2837 LOG_WARNING("NOTE! Severe performance degradation without working memory enabled.");
2840 if (get_target_reset_nag() && !arm7_9
->fast_memory_access
)
2842 LOG_WARNING("NOTE! Severe performance degradation without fast memory access enabled. Type 'help fast'.");
2848 COMMAND_HANDLER(handle_arm7_9_dbgrq_command
)
2850 struct target
*target
= get_current_target(CMD_CTX
);
2851 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2853 if (!is_arm7_9(arm7_9
))
2855 command_print(CMD_CTX
, "current target isn't an ARM7/ARM9 target");
2856 return ERROR_TARGET_INVALID
;
2860 COMMAND_PARSE_ENABLE(CMD_ARGV
[0],arm7_9
->use_dbgrq
);
2862 command_print(CMD_CTX
, "use of EmbeddedICE dbgrq instead of breakpoint for target halt %s", (arm7_9
->use_dbgrq
) ? "enabled" : "disabled");
2867 COMMAND_HANDLER(handle_arm7_9_fast_memory_access_command
)
2869 struct target
*target
= get_current_target(CMD_CTX
);
2870 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2872 if (!is_arm7_9(arm7_9
))
2874 command_print(CMD_CTX
, "current target isn't an ARM7/ARM9 target");
2875 return ERROR_TARGET_INVALID
;
2879 COMMAND_PARSE_ENABLE(CMD_ARGV
[0], arm7_9
->fast_memory_access
);
2881 command_print(CMD_CTX
, "fast memory access is %s", (arm7_9
->fast_memory_access
) ? "enabled" : "disabled");
2886 COMMAND_HANDLER(handle_arm7_9_dcc_downloads_command
)
2888 struct target
*target
= get_current_target(CMD_CTX
);
2889 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2891 if (!is_arm7_9(arm7_9
))
2893 command_print(CMD_CTX
, "current target isn't an ARM7/ARM9 target");
2894 return ERROR_TARGET_INVALID
;
2898 COMMAND_PARSE_ENABLE(CMD_ARGV
[0], arm7_9
->dcc_downloads
);
2900 command_print(CMD_CTX
, "dcc downloads are %s", (arm7_9
->dcc_downloads
) ? "enabled" : "disabled");
2905 static int arm7_9_setup_semihosting(struct target
*target
, int enable
)
2907 struct arm7_9_common
*arm7_9
= target_to_arm7_9(target
);
2909 if (!is_arm7_9(arm7_9
))
2911 LOG_USER("current target isn't an ARM7/ARM9 target");
2912 return ERROR_TARGET_INVALID
;
2915 if (arm7_9
->has_vector_catch
) {
2916 struct reg
*vector_catch
= &arm7_9
->eice_cache
2917 ->reg_list
[EICE_VEC_CATCH
];
2919 if (!vector_catch
->valid
)
2920 embeddedice_read_reg(vector_catch
);
2921 buf_set_u32(vector_catch
->value
, 2, 1, enable
);
2922 embeddedice_store_reg(vector_catch
);
2924 /* TODO: allow optional high vectors and/or BKPT_HARD */
2926 breakpoint_add(target
, 8, 4, BKPT_SOFT
);
2928 breakpoint_remove(target
, 8);
2934 int arm7_9_init_arch_info(struct target
*target
, struct arm7_9_common
*arm7_9
)
2936 int retval
= ERROR_OK
;
2937 struct arm
*armv4_5
= &arm7_9
->armv4_5_common
;
2939 arm7_9
->common_magic
= ARM7_9_COMMON_MAGIC
;
2941 if ((retval
= arm_jtag_setup_connection(&arm7_9
->jtag_info
)) != ERROR_OK
)
2944 /* caller must have allocated via calloc(), so everything's zeroed */
2946 arm7_9
->wp_available_max
= 2;
2948 arm7_9
->fast_memory_access
= false;
2949 arm7_9
->dcc_downloads
= false;
2951 armv4_5
->arch_info
= arm7_9
;
2952 armv4_5
->read_core_reg
= arm7_9_read_core_reg
;
2953 armv4_5
->write_core_reg
= arm7_9_write_core_reg
;
2954 armv4_5
->full_context
= arm7_9_full_context
;
2955 armv4_5
->setup_semihosting
= arm7_9_setup_semihosting
;
2957 retval
= arm_init_arch_info(target
, armv4_5
);
2958 if (retval
!= ERROR_OK
)
2961 return target_register_timer_callback(arm7_9_handle_target_request
,
2965 static const struct command_registration arm7_9_any_command_handlers
[] = {
2968 .handler
= handle_arm7_9_dbgrq_command
,
2969 .mode
= COMMAND_ANY
,
2970 .usage
= "['enable'|'disable']",
2971 .help
= "use EmbeddedICE dbgrq instead of breakpoint "
2972 "for target halt requests",
2975 "fast_memory_access",
2976 .handler
= handle_arm7_9_fast_memory_access_command
,
2977 .mode
= COMMAND_ANY
,
2978 .usage
= "['enable'|'disable']",
2979 .help
= "use fast memory accesses instead of slower "
2980 "but potentially safer accesses",
2984 .handler
= handle_arm7_9_dcc_downloads_command
,
2985 .mode
= COMMAND_ANY
,
2986 .usage
= "['enable'|'disable']",
2987 .help
= "use DCC downloads for larger memory writes",
2989 COMMAND_REGISTRATION_DONE
2991 const struct command_registration arm7_9_command_handlers
[] = {
2993 .chain
= arm_command_handlers
,
2996 .chain
= etm_command_handlers
,
3000 .mode
= COMMAND_ANY
,
3001 .help
= "arm7/9 specific commands",
3002 .chain
= arm7_9_any_command_handlers
,
3004 COMMAND_REGISTRATION_DONE
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)