1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * Copyright (C) 2006 by Magnus Lundin *
8 * Copyright (C) 2008 by Spencer Oliver *
9 * spen@spen-soft.co.uk *
11 * This program is free software; you can redistribute it and/or modify *
12 * it under the terms of the GNU General Public License as published by *
13 * the Free Software Foundation; either version 2 of the License, or *
14 * (at your option) any later version. *
16 * This program is distributed in the hope that it will be useful, *
17 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
19 * GNU General Public License for more details. *
21 * You should have received a copy of the GNU General Public License *
22 * along with this program; if not, write to the *
23 * Free Software Foundation, Inc., *
24 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
27 * Cortex-M3(tm) TRM, ARM DDI 0337E (r1p1) and 0337G (r2p0) *
29 ***************************************************************************/
34 #include "breakpoints.h"
35 #include "cortex_m3.h"
36 #include "target_request.h"
37 #include "target_type.h"
38 #include "arm_disassembler.h"
40 #include "arm_opcodes.h"
43 /* NOTE: most of this should work fine for the Cortex-M1 and
44 * Cortex-M0 cores too, although they're ARMv6-M not ARMv7-M.
45 * Some differences: M0/M1 doesn't have FBP remapping or the
46 * DWT tracing/profiling support. (So the cycle counter will
47 * not be usable; the other stuff isn't currently used here.)
49 * Although there are some workarounds for errata seen only in r0p0
50 * silicon, such old parts are hard to find and thus not much tested
55 /* forward declarations */
56 static int cortex_m3_set_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
);
57 static int cortex_m3_unset_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
);
58 static void cortex_m3_enable_watchpoints(struct target
*target
);
59 static int cortex_m3_store_core_reg_u32(struct target
*target
,
60 enum armv7m_regtype type
, uint32_t num
, uint32_t value
);
62 static int cortexm3_dap_read_coreregister_u32(struct swjdp_common
*swjdp
,
63 uint32_t *value
, int regnum
)
68 /* because the DCB_DCRDR is used for the emulated dcc channel
69 * we have to save/restore the DCB_DCRDR when used */
71 mem_ap_read_u32(swjdp
, DCB_DCRDR
, &dcrdr
);
73 swjdp
->trans_mode
= TRANS_MODE_COMPOSITE
;
75 /* mem_ap_write_u32(swjdp, DCB_DCRSR, regnum); */
76 dap_setup_accessport(swjdp
, CSW_32BIT
| CSW_ADDRINC_OFF
, DCB_DCRSR
& 0xFFFFFFF0);
77 dap_ap_write_reg_u32(swjdp
, AP_REG_BD0
| (DCB_DCRSR
& 0xC), regnum
);
79 /* mem_ap_read_u32(swjdp, DCB_DCRDR, value); */
80 dap_setup_accessport(swjdp
, CSW_32BIT
| CSW_ADDRINC_OFF
, DCB_DCRDR
& 0xFFFFFFF0);
81 dap_ap_read_reg_u32(swjdp
, AP_REG_BD0
| (DCB_DCRDR
& 0xC), value
);
83 retval
= jtagdp_transaction_endcheck(swjdp
);
85 /* restore DCB_DCRDR - this needs to be in a seperate
86 * transaction otherwise the emulated DCC channel breaks */
87 if (retval
== ERROR_OK
)
88 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DCRDR
, dcrdr
);
93 static int cortexm3_dap_write_coreregister_u32(struct swjdp_common
*swjdp
,
94 uint32_t value
, int regnum
)
99 /* because the DCB_DCRDR is used for the emulated dcc channel
100 * we have to save/restore the DCB_DCRDR when used */
102 mem_ap_read_u32(swjdp
, DCB_DCRDR
, &dcrdr
);
104 swjdp
->trans_mode
= TRANS_MODE_COMPOSITE
;
106 /* mem_ap_write_u32(swjdp, DCB_DCRDR, core_regs[i]); */
107 dap_setup_accessport(swjdp
, CSW_32BIT
| CSW_ADDRINC_OFF
, DCB_DCRDR
& 0xFFFFFFF0);
108 dap_ap_write_reg_u32(swjdp
, AP_REG_BD0
| (DCB_DCRDR
& 0xC), value
);
110 /* mem_ap_write_u32(swjdp, DCB_DCRSR, i | DCRSR_WnR); */
111 dap_setup_accessport(swjdp
, CSW_32BIT
| CSW_ADDRINC_OFF
, DCB_DCRSR
& 0xFFFFFFF0);
112 dap_ap_write_reg_u32(swjdp
, AP_REG_BD0
| (DCB_DCRSR
& 0xC), regnum
| DCRSR_WnR
);
114 retval
= jtagdp_transaction_endcheck(swjdp
);
116 /* restore DCB_DCRDR - this needs to be in a seperate
117 * transaction otherwise the emulated DCC channel breaks */
118 if (retval
== ERROR_OK
)
119 retval
= mem_ap_write_atomic_u32(swjdp
, DCB_DCRDR
, dcrdr
);
124 static int cortex_m3_write_debug_halt_mask(struct target
*target
,
125 uint32_t mask_on
, uint32_t mask_off
)
127 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
128 struct swjdp_common
*swjdp
= &cortex_m3
->armv7m
.swjdp_info
;
130 /* mask off status bits */
131 cortex_m3
->dcb_dhcsr
&= ~((0xFFFF << 16) | mask_off
);
132 /* create new register mask */
133 cortex_m3
->dcb_dhcsr
|= DBGKEY
| C_DEBUGEN
| mask_on
;
135 return mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
, cortex_m3
->dcb_dhcsr
);
138 static int cortex_m3_clear_halt(struct target
*target
)
140 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
141 struct swjdp_common
*swjdp
= &cortex_m3
->armv7m
.swjdp_info
;
143 /* clear step if any */
144 cortex_m3_write_debug_halt_mask(target
, C_HALT
, C_STEP
);
146 /* Read Debug Fault Status Register */
147 mem_ap_read_atomic_u32(swjdp
, NVIC_DFSR
, &cortex_m3
->nvic_dfsr
);
149 /* Clear Debug Fault Status */
150 mem_ap_write_atomic_u32(swjdp
, NVIC_DFSR
, cortex_m3
->nvic_dfsr
);
151 LOG_DEBUG(" NVIC_DFSR 0x%" PRIx32
"", cortex_m3
->nvic_dfsr
);
156 static int cortex_m3_single_step_core(struct target
*target
)
158 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
159 struct swjdp_common
*swjdp
= &cortex_m3
->armv7m
.swjdp_info
;
162 /* backup dhcsr reg */
163 dhcsr_save
= cortex_m3
->dcb_dhcsr
;
165 /* Mask interrupts before clearing halt, if done already. This avoids
166 * Erratum 377497 (fixed in r1p0) where setting MASKINTS while clearing
167 * HALT can put the core into an unknown state.
169 if (!(cortex_m3
->dcb_dhcsr
& C_MASKINTS
))
170 mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
,
171 DBGKEY
| C_MASKINTS
| C_HALT
| C_DEBUGEN
);
172 mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
,
173 DBGKEY
| C_MASKINTS
| C_STEP
| C_DEBUGEN
);
176 /* restore dhcsr reg */
177 cortex_m3
->dcb_dhcsr
= dhcsr_save
;
178 cortex_m3_clear_halt(target
);
183 static int cortex_m3_endreset_event(struct target
*target
)
187 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
188 struct armv7m_common
*armv7m
= &cortex_m3
->armv7m
;
189 struct swjdp_common
*swjdp
= &cortex_m3
->armv7m
.swjdp_info
;
190 struct cortex_m3_fp_comparator
*fp_list
= cortex_m3
->fp_comparator_list
;
191 struct cortex_m3_dwt_comparator
*dwt_list
= cortex_m3
->dwt_comparator_list
;
193 /* REVISIT The four debug monitor bits are currently ignored... */
194 mem_ap_read_atomic_u32(swjdp
, DCB_DEMCR
, &dcb_demcr
);
195 LOG_DEBUG("DCB_DEMCR = 0x%8.8" PRIx32
"",dcb_demcr
);
197 /* this register is used for emulated dcc channel */
198 mem_ap_write_u32(swjdp
, DCB_DCRDR
, 0);
200 /* Enable debug requests */
201 mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
202 if (!(cortex_m3
->dcb_dhcsr
& C_DEBUGEN
))
203 mem_ap_write_u32(swjdp
, DCB_DHCSR
, DBGKEY
| C_DEBUGEN
);
205 /* clear any interrupt masking */
206 cortex_m3_write_debug_halt_mask(target
, 0, C_MASKINTS
);
208 /* Enable features controlled by ITM and DWT blocks, and catch only
209 * the vectors we were told to pay attention to.
211 * Target firmware is responsible for all fault handling policy
212 * choices *EXCEPT* explicitly scripted overrides like "vector_catch"
213 * or manual updates to the NVIC SHCSR and CCR registers.
215 mem_ap_write_u32(swjdp
, DCB_DEMCR
, TRCENA
| armv7m
->demcr
);
217 /* Paranoia: evidently some (early?) chips don't preserve all the
218 * debug state (including FBP, DWT, etc) across reset...
222 target_write_u32(target
, FP_CTRL
, 3);
223 cortex_m3
->fpb_enabled
= 1;
225 /* Restore FPB registers */
226 for (i
= 0; i
< cortex_m3
->fp_num_code
+ cortex_m3
->fp_num_lit
; i
++)
228 target_write_u32(target
, fp_list
[i
].fpcr_address
, fp_list
[i
].fpcr_value
);
231 /* Restore DWT registers */
232 for (i
= 0; i
< cortex_m3
->dwt_num_comp
; i
++)
234 target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 0,
236 target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 4,
238 target_write_u32(target
, dwt_list
[i
].dwt_comparator_address
+ 8,
239 dwt_list
[i
].function
);
241 jtagdp_transaction_endcheck(swjdp
);
243 register_cache_invalidate(cortex_m3
->armv7m
.core_cache
);
245 /* make sure we have latest dhcsr flags */
246 mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
251 static int cortex_m3_examine_debug_reason(struct target
*target
)
253 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
255 /* THIS IS NOT GOOD, TODO - better logic for detection of debug state reason */
256 /* only check the debug reason if we don't know it already */
258 if ((target
->debug_reason
!= DBG_REASON_DBGRQ
)
259 && (target
->debug_reason
!= DBG_REASON_SINGLESTEP
))
261 if (cortex_m3
->nvic_dfsr
& DFSR_BKPT
)
263 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
264 if (cortex_m3
->nvic_dfsr
& DFSR_DWTTRAP
)
265 target
->debug_reason
= DBG_REASON_WPTANDBKPT
;
267 else if (cortex_m3
->nvic_dfsr
& DFSR_DWTTRAP
)
268 target
->debug_reason
= DBG_REASON_WATCHPOINT
;
269 else if (cortex_m3
->nvic_dfsr
& DFSR_VCATCH
)
270 target
->debug_reason
= DBG_REASON_BREAKPOINT
;
271 else /* EXTERNAL, HALTED */
272 target
->debug_reason
= DBG_REASON_UNDEFINED
;
278 static int cortex_m3_examine_exception_reason(struct target
*target
)
280 uint32_t shcsr
, except_sr
, cfsr
= -1, except_ar
= -1;
281 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
282 struct swjdp_common
*swjdp
= &armv7m
->swjdp_info
;
284 mem_ap_read_u32(swjdp
, NVIC_SHCSR
, &shcsr
);
285 switch (armv7m
->exception_number
)
289 case 3: /* Hard Fault */
290 mem_ap_read_atomic_u32(swjdp
, NVIC_HFSR
, &except_sr
);
291 if (except_sr
& 0x40000000)
293 mem_ap_read_u32(swjdp
, NVIC_CFSR
, &cfsr
);
296 case 4: /* Memory Management */
297 mem_ap_read_u32(swjdp
, NVIC_CFSR
, &except_sr
);
298 mem_ap_read_u32(swjdp
, NVIC_MMFAR
, &except_ar
);
300 case 5: /* Bus Fault */
301 mem_ap_read_u32(swjdp
, NVIC_CFSR
, &except_sr
);
302 mem_ap_read_u32(swjdp
, NVIC_BFAR
, &except_ar
);
304 case 6: /* Usage Fault */
305 mem_ap_read_u32(swjdp
, NVIC_CFSR
, &except_sr
);
307 case 11: /* SVCall */
309 case 12: /* Debug Monitor */
310 mem_ap_read_u32(swjdp
, NVIC_DFSR
, &except_sr
);
312 case 14: /* PendSV */
314 case 15: /* SysTick */
320 jtagdp_transaction_endcheck(swjdp
);
321 LOG_DEBUG("%s SHCSR 0x%" PRIx32
", SR 0x%" PRIx32
", CFSR 0x%" PRIx32
", AR 0x%" PRIx32
"", armv7m_exception_string(armv7m
->exception_number
), \
322 shcsr
, except_sr
, cfsr
, except_ar
);
326 static int cortex_m3_debug_entry(struct target
*target
)
331 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
332 struct armv7m_common
*armv7m
= &cortex_m3
->armv7m
;
333 struct swjdp_common
*swjdp
= &armv7m
->swjdp_info
;
338 cortex_m3_clear_halt(target
);
339 mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
341 if ((retval
= armv7m
->examine_debug_reason(target
)) != ERROR_OK
)
344 /* Examine target state and mode */
345 /* First load register acessible through core debug port*/
346 int num_regs
= armv7m
->core_cache
->num_regs
;
348 for (i
= 0; i
< num_regs
; i
++)
350 if (!armv7m
->core_cache
->reg_list
[i
].valid
)
351 armv7m
->read_core_reg(target
, i
);
354 r
= armv7m
->core_cache
->reg_list
+ ARMV7M_xPSR
;
355 xPSR
= buf_get_u32(r
->value
, 0, 32);
357 #ifdef ARMV7_GDB_HACKS
358 /* FIXME this breaks on scan chains with more than one Cortex-M3.
359 * Instead, each CM3 should have its own dummy value...
361 /* copy real xpsr reg for gdb, setting thumb bit */
362 buf_set_u32(armv7m_gdb_dummy_cpsr_value
, 0, 32, xPSR
);
363 buf_set_u32(armv7m_gdb_dummy_cpsr_value
, 5, 1, 1);
364 armv7m_gdb_dummy_cpsr_reg
.valid
= r
->valid
;
365 armv7m_gdb_dummy_cpsr_reg
.dirty
= r
->dirty
;
368 /* For IT instructions xPSR must be reloaded on resume and clear on debug exec */
372 cortex_m3_store_core_reg_u32(target
, ARMV7M_REGISTER_CORE_GP
, 16, xPSR
&~ 0xff);
375 /* Are we in an exception handler */
378 armv7m
->core_mode
= ARMV7M_MODE_HANDLER
;
379 armv7m
->exception_number
= (xPSR
& 0x1FF);
383 armv7m
->core_mode
= buf_get_u32(armv7m
->core_cache
384 ->reg_list
[ARMV7M_CONTROL
].value
, 0, 1);
385 armv7m
->exception_number
= 0;
388 if (armv7m
->exception_number
)
390 cortex_m3_examine_exception_reason(target
);
393 LOG_DEBUG("entered debug state in core mode: %s at PC 0x%" PRIx32
", target->state: %s",
394 armv7m_mode_strings
[armv7m
->core_mode
],
395 *(uint32_t*)(armv7m
->core_cache
->reg_list
[15].value
),
396 target_state_name(target
));
398 if (armv7m
->post_debug_entry
)
399 armv7m
->post_debug_entry(target
);
404 static int cortex_m3_poll(struct target
*target
)
407 enum target_state prev_target_state
= target
->state
;
408 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
409 struct swjdp_common
*swjdp
= &cortex_m3
->armv7m
.swjdp_info
;
411 /* Read from Debug Halting Control and Status Register */
412 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
413 if (retval
!= ERROR_OK
)
415 target
->state
= TARGET_UNKNOWN
;
419 /* Recover from lockup. See ARMv7-M architecture spec,
420 * section B1.5.15 "Unrecoverable exception cases".
422 * REVISIT Is there a better way to report and handle this?
424 if (cortex_m3
->dcb_dhcsr
& S_LOCKUP
) {
425 LOG_WARNING("%s -- clearing lockup after double fault",
426 target_name(target
));
427 cortex_m3_write_debug_halt_mask(target
, C_HALT
, 0);
428 target
->debug_reason
= DBG_REASON_DBGRQ
;
430 /* refresh status bits */
431 mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
434 if (cortex_m3
->dcb_dhcsr
& S_RESET_ST
)
436 /* check if still in reset */
437 mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
439 if (cortex_m3
->dcb_dhcsr
& S_RESET_ST
)
441 target
->state
= TARGET_RESET
;
446 if (target
->state
== TARGET_RESET
)
448 /* Cannot switch context while running so endreset is
449 * called with target->state == TARGET_RESET
451 LOG_DEBUG("Exit from reset with dcb_dhcsr 0x%" PRIx32
,
452 cortex_m3
->dcb_dhcsr
);
453 cortex_m3_endreset_event(target
);
454 target
->state
= TARGET_RUNNING
;
455 prev_target_state
= TARGET_RUNNING
;
458 if (cortex_m3
->dcb_dhcsr
& S_HALT
)
460 target
->state
= TARGET_HALTED
;
462 if ((prev_target_state
== TARGET_RUNNING
) || (prev_target_state
== TARGET_RESET
))
464 if ((retval
= cortex_m3_debug_entry(target
)) != ERROR_OK
)
467 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
469 if (prev_target_state
== TARGET_DEBUG_RUNNING
)
472 if ((retval
= cortex_m3_debug_entry(target
)) != ERROR_OK
)
475 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_HALTED
);
479 /* REVISIT when S_SLEEP is set, it's in a Sleep or DeepSleep state.
480 * How best to model low power modes?
483 if (target
->state
== TARGET_UNKNOWN
)
485 /* check if processor is retiring instructions */
486 if (cortex_m3
->dcb_dhcsr
& S_RETIRE_ST
)
488 target
->state
= TARGET_RUNNING
;
496 static int cortex_m3_halt(struct target
*target
)
498 LOG_DEBUG("target->state: %s",
499 target_state_name(target
));
501 if (target
->state
== TARGET_HALTED
)
503 LOG_DEBUG("target was already halted");
507 if (target
->state
== TARGET_UNKNOWN
)
509 LOG_WARNING("target was in unknown state when halt was requested");
512 if (target
->state
== TARGET_RESET
)
514 if ((jtag_get_reset_config() & RESET_SRST_PULLS_TRST
) && jtag_get_srst())
516 LOG_ERROR("can't request a halt while in reset if nSRST pulls nTRST");
517 return ERROR_TARGET_FAILURE
;
521 /* we came here in a reset_halt or reset_init sequence
522 * debug entry was already prepared in cortex_m3_prepare_reset_halt()
524 target
->debug_reason
= DBG_REASON_DBGRQ
;
530 /* Write to Debug Halting Control and Status Register */
531 cortex_m3_write_debug_halt_mask(target
, C_HALT
, 0);
533 target
->debug_reason
= DBG_REASON_DBGRQ
;
538 static int cortex_m3_soft_reset_halt(struct target
*target
)
540 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
541 struct swjdp_common
*swjdp
= &cortex_m3
->armv7m
.swjdp_info
;
542 uint32_t dcb_dhcsr
= 0;
543 int retval
, timeout
= 0;
545 /* Enter debug state on reset; restore DEMCR in endreset_event() */
546 mem_ap_write_u32(swjdp
, DCB_DEMCR
,
547 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
549 /* Request a core-only reset */
550 mem_ap_write_atomic_u32(swjdp
, NVIC_AIRCR
,
551 AIRCR_VECTKEY
| AIRCR_VECTRESET
);
552 target
->state
= TARGET_RESET
;
554 /* registers are now invalid */
555 register_cache_invalidate(cortex_m3
->armv7m
.core_cache
);
557 while (timeout
< 100)
559 retval
= mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &dcb_dhcsr
);
560 if (retval
== ERROR_OK
)
562 mem_ap_read_atomic_u32(swjdp
, NVIC_DFSR
,
563 &cortex_m3
->nvic_dfsr
);
564 if ((dcb_dhcsr
& S_HALT
)
565 && (cortex_m3
->nvic_dfsr
& DFSR_VCATCH
))
567 LOG_DEBUG("system reset-halted, DHCSR 0x%08x, "
569 (unsigned) dcb_dhcsr
,
570 (unsigned) cortex_m3
->nvic_dfsr
);
571 cortex_m3_poll(target
);
572 /* FIXME restore user's vector catch config */
576 LOG_DEBUG("waiting for system reset-halt, "
577 "DHCSR 0x%08x, %d ms",
578 (unsigned) dcb_dhcsr
, timeout
);
587 static void cortex_m3_enable_breakpoints(struct target
*target
)
589 struct breakpoint
*breakpoint
= target
->breakpoints
;
591 /* set any pending breakpoints */
594 if (!breakpoint
->set
)
595 cortex_m3_set_breakpoint(target
, breakpoint
);
596 breakpoint
= breakpoint
->next
;
600 static int cortex_m3_resume(struct target
*target
, int current
,
601 uint32_t address
, int handle_breakpoints
, int debug_execution
)
603 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
604 struct breakpoint
*breakpoint
= NULL
;
608 if (target
->state
!= TARGET_HALTED
)
610 LOG_WARNING("target not halted");
611 return ERROR_TARGET_NOT_HALTED
;
614 if (!debug_execution
)
616 target_free_all_working_areas(target
);
617 cortex_m3_enable_breakpoints(target
);
618 cortex_m3_enable_watchpoints(target
);
623 r
= armv7m
->core_cache
->reg_list
+ ARMV7M_PRIMASK
;
625 /* Disable interrupts */
626 /* We disable interrupts in the PRIMASK register instead of
627 * masking with C_MASKINTS. This is probably the same issue
628 * as Cortex-M3 Erratum 377493 (fixed in r1p0): C_MASKINTS
629 * in parallel with disabled interrupts can cause local faults
632 * REVISIT this clearly breaks non-debug execution, since the
633 * PRIMASK register state isn't saved/restored... workaround
634 * by never resuming app code after debug execution.
636 buf_set_u32(r
->value
, 0, 1, 1);
640 /* Make sure we are in Thumb mode */
641 r
= armv7m
->core_cache
->reg_list
+ ARMV7M_xPSR
;
642 buf_set_u32(r
->value
, 24, 1, 1);
647 /* current = 1: continue on current pc, otherwise continue at <address> */
648 r
= armv7m
->core_cache
->reg_list
+ 15;
651 buf_set_u32(r
->value
, 0, 32, address
);
656 /* if we halted last time due to a bkpt instruction
657 * then we have to manually step over it, otherwise
658 * the core will break again */
660 if (!breakpoint_find(target
, buf_get_u32(r
->value
, 0, 32))
663 armv7m_maybe_skip_bkpt_inst(target
, NULL
);
666 resume_pc
= buf_get_u32(r
->value
, 0, 32);
668 armv7m_restore_context(target
);
670 /* the front-end may request us not to handle breakpoints */
671 if (handle_breakpoints
)
673 /* Single step past breakpoint at current address */
674 if ((breakpoint
= breakpoint_find(target
, resume_pc
)))
676 LOG_DEBUG("unset breakpoint at 0x%8.8" PRIx32
" (ID: %d)",
678 breakpoint
->unique_id
);
679 cortex_m3_unset_breakpoint(target
, breakpoint
);
680 cortex_m3_single_step_core(target
);
681 cortex_m3_set_breakpoint(target
, breakpoint
);
686 cortex_m3_write_debug_halt_mask(target
, 0, C_HALT
);
688 target
->debug_reason
= DBG_REASON_NOTHALTED
;
690 /* registers are now invalid */
691 register_cache_invalidate(armv7m
->core_cache
);
693 if (!debug_execution
)
695 target
->state
= TARGET_RUNNING
;
696 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
697 LOG_DEBUG("target resumed at 0x%" PRIx32
"", resume_pc
);
701 target
->state
= TARGET_DEBUG_RUNNING
;
702 target_call_event_callbacks(target
, TARGET_EVENT_DEBUG_RESUMED
);
703 LOG_DEBUG("target debug resumed at 0x%" PRIx32
"", resume_pc
);
709 /* int irqstepcount = 0; */
710 static int cortex_m3_step(struct target
*target
, int current
,
711 uint32_t address
, int handle_breakpoints
)
713 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
714 struct armv7m_common
*armv7m
= &cortex_m3
->armv7m
;
715 struct swjdp_common
*swjdp
= &armv7m
->swjdp_info
;
716 struct breakpoint
*breakpoint
= NULL
;
717 struct reg
*pc
= armv7m
->core_cache
->reg_list
+ 15;
718 bool bkpt_inst_found
= false;
720 if (target
->state
!= TARGET_HALTED
)
722 LOG_WARNING("target not halted");
723 return ERROR_TARGET_NOT_HALTED
;
726 /* current = 1: continue on current pc, otherwise continue at <address> */
728 buf_set_u32(pc
->value
, 0, 32, address
);
730 /* the front-end may request us not to handle breakpoints */
731 if (handle_breakpoints
) {
732 breakpoint
= breakpoint_find(target
,
733 buf_get_u32(pc
->value
, 0, 32));
735 cortex_m3_unset_breakpoint(target
, breakpoint
);
738 armv7m_maybe_skip_bkpt_inst(target
, &bkpt_inst_found
);
740 target
->debug_reason
= DBG_REASON_SINGLESTEP
;
742 armv7m_restore_context(target
);
744 target_call_event_callbacks(target
, TARGET_EVENT_RESUMED
);
746 /* if no bkpt instruction is found at pc then we can perform
747 * a normal step, otherwise we have to manually step over the bkpt
748 * instruction - as such simulate a step */
749 if (bkpt_inst_found
== false)
751 /* set step and clear halt */
752 cortex_m3_write_debug_halt_mask(target
, C_STEP
, C_HALT
);
755 mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
757 /* registers are now invalid */
758 register_cache_invalidate(cortex_m3
->armv7m
.core_cache
);
761 cortex_m3_set_breakpoint(target
, breakpoint
);
763 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
764 " nvic_icsr = 0x%" PRIx32
,
765 cortex_m3
->dcb_dhcsr
, cortex_m3
->nvic_icsr
);
767 cortex_m3_debug_entry(target
);
768 target_call_event_callbacks(target
, TARGET_EVENT_HALTED
);
770 LOG_DEBUG("target stepped dcb_dhcsr = 0x%" PRIx32
771 " nvic_icsr = 0x%" PRIx32
,
772 cortex_m3
->dcb_dhcsr
, cortex_m3
->nvic_icsr
);
777 static int cortex_m3_assert_reset(struct target
*target
)
779 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
780 struct swjdp_common
*swjdp
= &cortex_m3
->armv7m
.swjdp_info
;
783 LOG_DEBUG("target->state: %s",
784 target_state_name(target
));
786 enum reset_types jtag_reset_config
= jtag_get_reset_config();
789 * We can reset Cortex-M3 targets using just the NVIC without
790 * requiring SRST, getting a SoC reset (or a core-only reset)
791 * instead of a system reset.
793 if (!(jtag_reset_config
& RESET_HAS_SRST
))
796 /* Enable debug requests */
797 mem_ap_read_atomic_u32(swjdp
, DCB_DHCSR
, &cortex_m3
->dcb_dhcsr
);
798 if (!(cortex_m3
->dcb_dhcsr
& C_DEBUGEN
))
799 mem_ap_write_u32(swjdp
, DCB_DHCSR
, DBGKEY
| C_DEBUGEN
);
801 mem_ap_write_u32(swjdp
, DCB_DCRDR
, 0);
803 if (!target
->reset_halt
)
805 /* Set/Clear C_MASKINTS in a separate operation */
806 if (cortex_m3
->dcb_dhcsr
& C_MASKINTS
)
807 mem_ap_write_atomic_u32(swjdp
, DCB_DHCSR
,
808 DBGKEY
| C_DEBUGEN
| C_HALT
);
810 /* clear any debug flags before resuming */
811 cortex_m3_clear_halt(target
);
813 /* clear C_HALT in dhcsr reg */
814 cortex_m3_write_debug_halt_mask(target
, 0, C_HALT
);
818 /* Halt in debug on reset; endreset_event() restores DEMCR.
820 * REVISIT catching BUSERR presumably helps to defend against
821 * bad vector table entries. Should this include MMERR or
824 mem_ap_write_atomic_u32(swjdp
, DCB_DEMCR
,
825 TRCENA
| VC_HARDERR
| VC_BUSERR
| VC_CORERESET
);
829 * When nRST is asserted on most Stellaris devices, it clears some of
830 * the debug state. The ARMv7M and Cortex-M3 TRMs say that's wrong;
831 * and OpenOCD depends on those TRMs. So we won't use SRST on those
832 * chips. (Only power-on reset should affect debug state, beyond a
833 * few specified bits; not the chip's nRST input, wired to SRST.)
835 * REVISIT current errata specs don't seem to cover this issue.
836 * Do we have more details than this email?
837 * https://lists.berlios.de/pipermail
838 * /openocd-development/2008-August/003065.html
840 if (strcmp(target
->variant
, "lm3s") == 0)
842 /* Check for silicon revisions with the issue. */
845 if (target_read_u32(target
, 0x400fe000, &did0
) == ERROR_OK
)
847 switch ((did0
>> 16) & 0xff)
850 /* all Sandstorm suffer issue */
856 /* Fury and DustDevil rev A have
857 * this nRST problem. It should
858 * be fixed in rev B silicon.
860 if (((did0
>> 8) & 0xff) == 0)
864 /* Tempest should be fine. */
872 /* default to asserting srst */
873 if (jtag_reset_config
& RESET_SRST_PULLS_TRST
)
875 jtag_add_reset(1, 1);
879 jtag_add_reset(0, 1);
884 /* Use a standard Cortex-M3 software reset mechanism.
885 * SYSRESETREQ will reset SoC peripherals outside the
886 * core, like watchdog timers, if the SoC wires it up
887 * correctly. Else VECRESET can reset just the core.
889 mem_ap_write_atomic_u32(swjdp
, NVIC_AIRCR
,
890 AIRCR_VECTKEY
| AIRCR_SYSRESETREQ
);
891 LOG_DEBUG("Using Cortex-M3 SYSRESETREQ");
894 /* I do not know why this is necessary, but it
895 * fixes strange effects (step/resume cause NMI
896 * after reset) on LM3S6918 -- Michael Schwingen
899 mem_ap_read_atomic_u32(swjdp
, NVIC_AIRCR
, &tmp
);
903 target
->state
= TARGET_RESET
;
904 jtag_add_sleep(50000);
906 register_cache_invalidate(cortex_m3
->armv7m
.core_cache
);
908 if (target
->reset_halt
)
911 if ((retval
= target_halt(target
)) != ERROR_OK
)
918 static int cortex_m3_deassert_reset(struct target
*target
)
920 LOG_DEBUG("target->state: %s",
921 target_state_name(target
));
923 /* deassert reset lines */
924 jtag_add_reset(0, 0);
930 cortex_m3_set_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
935 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
936 struct cortex_m3_fp_comparator
*comparator_list
= cortex_m3
->fp_comparator_list
;
940 LOG_WARNING("breakpoint (BPID: %d) already set", breakpoint
->unique_id
);
944 if (cortex_m3
->auto_bp_type
)
946 breakpoint
->type
= (breakpoint
->address
< 0x20000000) ? BKPT_HARD
: BKPT_SOFT
;
949 if (breakpoint
->type
== BKPT_HARD
)
951 while (comparator_list
[fp_num
].used
&& (fp_num
< cortex_m3
->fp_num_code
))
953 if (fp_num
>= cortex_m3
->fp_num_code
)
955 LOG_ERROR("Can not find free FPB Comparator!");
958 breakpoint
->set
= fp_num
+ 1;
959 hilo
= (breakpoint
->address
& 0x2) ? FPCR_REPLACE_BKPT_HIGH
: FPCR_REPLACE_BKPT_LOW
;
960 comparator_list
[fp_num
].used
= 1;
961 comparator_list
[fp_num
].fpcr_value
= (breakpoint
->address
& 0x1FFFFFFC) | hilo
| 1;
962 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
, comparator_list
[fp_num
].fpcr_value
);
963 LOG_DEBUG("fpc_num %i fpcr_value 0x%" PRIx32
"", fp_num
, comparator_list
[fp_num
].fpcr_value
);
964 if (!cortex_m3
->fpb_enabled
)
966 LOG_DEBUG("FPB wasn't enabled, do it now");
967 target_write_u32(target
, FP_CTRL
, 3);
970 else if (breakpoint
->type
== BKPT_SOFT
)
974 /* NOTE: on ARMv6-M and ARMv7-M, BKPT(0xab) is used for
975 * semihosting; don't use that. Otherwise the BKPT
976 * parameter is arbitrary.
978 buf_set_u32(code
, 0, 32, ARMV5_T_BKPT(0x11));
979 retval
= target_read_memory(target
,
980 breakpoint
->address
& 0xFFFFFFFE,
981 breakpoint
->length
, 1,
982 breakpoint
->orig_instr
);
983 if (retval
!= ERROR_OK
)
985 retval
= target_write_memory(target
,
986 breakpoint
->address
& 0xFFFFFFFE,
987 breakpoint
->length
, 1,
989 if (retval
!= ERROR_OK
)
991 breakpoint
->set
= true;
994 LOG_DEBUG("BPID: %d, Type: %d, Address: 0x%08" PRIx32
" Length: %d (set=%d)",
995 breakpoint
->unique_id
,
996 (int)(breakpoint
->type
),
1005 cortex_m3_unset_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1008 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1009 struct cortex_m3_fp_comparator
* comparator_list
= cortex_m3
->fp_comparator_list
;
1011 if (!breakpoint
->set
)
1013 LOG_WARNING("breakpoint not set");
1017 LOG_DEBUG("BPID: %d, Type: %d, Address: 0x%08" PRIx32
" Length: %d (set=%d)",
1018 breakpoint
->unique_id
,
1019 (int)(breakpoint
->type
),
1020 breakpoint
->address
,
1024 if (breakpoint
->type
== BKPT_HARD
)
1026 int fp_num
= breakpoint
->set
- 1;
1027 if ((fp_num
< 0) || (fp_num
>= cortex_m3
->fp_num_code
))
1029 LOG_DEBUG("Invalid FP Comparator number in breakpoint");
1032 comparator_list
[fp_num
].used
= 0;
1033 comparator_list
[fp_num
].fpcr_value
= 0;
1034 target_write_u32(target
, comparator_list
[fp_num
].fpcr_address
, comparator_list
[fp_num
].fpcr_value
);
1038 /* restore original instruction (kept in target endianness) */
1039 if (breakpoint
->length
== 4)
1041 if ((retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE, 4, 1, breakpoint
->orig_instr
)) != ERROR_OK
)
1048 if ((retval
= target_write_memory(target
, breakpoint
->address
& 0xFFFFFFFE, 2, 1, breakpoint
->orig_instr
)) != ERROR_OK
)
1054 breakpoint
->set
= false;
1060 cortex_m3_add_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1062 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1064 if (cortex_m3
->auto_bp_type
)
1066 breakpoint
->type
= (breakpoint
->address
< 0x20000000) ? BKPT_HARD
: BKPT_SOFT
;
1067 #ifdef ARMV7_GDB_HACKS
1068 if (breakpoint
->length
!= 2) {
1069 /* XXX Hack: Replace all breakpoints with length != 2 with
1070 * a hardware breakpoint. */
1071 breakpoint
->type
= BKPT_HARD
;
1072 breakpoint
->length
= 2;
1077 if ((breakpoint
->type
== BKPT_HARD
) && (breakpoint
->address
>= 0x20000000))
1079 LOG_INFO("flash patch comparator requested outside code memory region");
1080 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1083 if ((breakpoint
->type
== BKPT_SOFT
) && (breakpoint
->address
< 0x20000000))
1085 LOG_INFO("soft breakpoint requested in code (flash) memory region");
1086 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1089 if ((breakpoint
->type
== BKPT_HARD
) && (cortex_m3
->fp_code_available
< 1))
1091 LOG_INFO("no flash patch comparator unit available for hardware breakpoint");
1092 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1095 if ((breakpoint
->length
!= 2))
1097 LOG_INFO("only breakpoints of two bytes length supported");
1098 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1101 if (breakpoint
->type
== BKPT_HARD
)
1102 cortex_m3
->fp_code_available
--;
1103 cortex_m3_set_breakpoint(target
, breakpoint
);
1109 cortex_m3_remove_breakpoint(struct target
*target
, struct breakpoint
*breakpoint
)
1111 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1113 /* REVISIT why check? FBP can be updated with core running ... */
1114 if (target
->state
!= TARGET_HALTED
)
1116 LOG_WARNING("target not halted");
1117 return ERROR_TARGET_NOT_HALTED
;
1120 if (cortex_m3
->auto_bp_type
)
1122 breakpoint
->type
= (breakpoint
->address
< 0x20000000) ? BKPT_HARD
: BKPT_SOFT
;
1125 if (breakpoint
->set
)
1127 cortex_m3_unset_breakpoint(target
, breakpoint
);
1130 if (breakpoint
->type
== BKPT_HARD
)
1131 cortex_m3
->fp_code_available
++;
1137 cortex_m3_set_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1140 uint32_t mask
, temp
;
1141 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1143 /* watchpoint params were validated earlier */
1145 temp
= watchpoint
->length
;
1152 /* REVISIT Don't fully trust these "not used" records ... users
1153 * may set up breakpoints by hand, e.g. dual-address data value
1154 * watchpoint using comparator #1; comparator #0 matching cycle
1155 * count; send data trace info through ITM and TPIU; etc
1157 struct cortex_m3_dwt_comparator
*comparator
;
1159 for (comparator
= cortex_m3
->dwt_comparator_list
;
1160 comparator
->used
&& dwt_num
< cortex_m3
->dwt_num_comp
;
1161 comparator
++, dwt_num
++)
1163 if (dwt_num
>= cortex_m3
->dwt_num_comp
)
1165 LOG_ERROR("Can not find free DWT Comparator");
1168 comparator
->used
= 1;
1169 watchpoint
->set
= dwt_num
+ 1;
1171 comparator
->comp
= watchpoint
->address
;
1172 target_write_u32(target
, comparator
->dwt_comparator_address
+ 0,
1175 comparator
->mask
= mask
;
1176 target_write_u32(target
, comparator
->dwt_comparator_address
+ 4,
1179 switch (watchpoint
->rw
) {
1181 comparator
->function
= 5;
1184 comparator
->function
= 6;
1187 comparator
->function
= 7;
1190 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1191 comparator
->function
);
1193 LOG_DEBUG("Watchpoint (ID %d) DWT%d 0x%08x 0x%x 0x%05x",
1194 watchpoint
->unique_id
, dwt_num
,
1195 (unsigned) comparator
->comp
,
1196 (unsigned) comparator
->mask
,
1197 (unsigned) comparator
->function
);
1202 cortex_m3_unset_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1204 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1205 struct cortex_m3_dwt_comparator
*comparator
;
1208 if (!watchpoint
->set
)
1210 LOG_WARNING("watchpoint (wpid: %d) not set",
1211 watchpoint
->unique_id
);
1215 dwt_num
= watchpoint
->set
- 1;
1217 LOG_DEBUG("Watchpoint (ID %d) DWT%d address: 0x%08x clear",
1218 watchpoint
->unique_id
, dwt_num
,
1219 (unsigned) watchpoint
->address
);
1221 if ((dwt_num
< 0) || (dwt_num
>= cortex_m3
->dwt_num_comp
))
1223 LOG_DEBUG("Invalid DWT Comparator number in watchpoint");
1227 comparator
= cortex_m3
->dwt_comparator_list
+ dwt_num
;
1228 comparator
->used
= 0;
1229 comparator
->function
= 0;
1230 target_write_u32(target
, comparator
->dwt_comparator_address
+ 8,
1231 comparator
->function
);
1233 watchpoint
->set
= false;
1239 cortex_m3_add_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1241 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1243 if (cortex_m3
->dwt_comp_available
< 1)
1245 LOG_DEBUG("no comparators?");
1246 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1249 /* hardware doesn't support data value masking */
1250 if (watchpoint
->mask
!= ~(uint32_t)0) {
1251 LOG_DEBUG("watchpoint value masks not supported");
1252 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1255 /* hardware allows address masks of up to 32K */
1258 for (mask
= 0; mask
< 16; mask
++) {
1259 if ((1u << mask
) == watchpoint
->length
)
1263 LOG_DEBUG("unsupported watchpoint length");
1264 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1266 if (watchpoint
->address
& ((1 << mask
) - 1)) {
1267 LOG_DEBUG("watchpoint address is unaligned");
1268 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1271 /* Caller doesn't seem to be able to describe watching for data
1272 * values of zero; that flags "no value".
1274 * REVISIT This DWT may well be able to watch for specific data
1275 * values. Requires comparator #1 to set DATAVMATCH and match
1276 * the data, and another comparator (DATAVADDR0) matching addr.
1278 if (watchpoint
->value
) {
1279 LOG_DEBUG("data value watchpoint not YET supported");
1280 return ERROR_TARGET_RESOURCE_NOT_AVAILABLE
;
1283 cortex_m3
->dwt_comp_available
--;
1284 LOG_DEBUG("dwt_comp_available: %d", cortex_m3
->dwt_comp_available
);
1290 cortex_m3_remove_watchpoint(struct target
*target
, struct watchpoint
*watchpoint
)
1292 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1294 /* REVISIT why check? DWT can be updated with core running ... */
1295 if (target
->state
!= TARGET_HALTED
)
1297 LOG_WARNING("target not halted");
1298 return ERROR_TARGET_NOT_HALTED
;
1301 if (watchpoint
->set
)
1303 cortex_m3_unset_watchpoint(target
, watchpoint
);
1306 cortex_m3
->dwt_comp_available
++;
1307 LOG_DEBUG("dwt_comp_available: %d", cortex_m3
->dwt_comp_available
);
1312 static void cortex_m3_enable_watchpoints(struct target
*target
)
1314 struct watchpoint
*watchpoint
= target
->watchpoints
;
1316 /* set any pending watchpoints */
1319 if (!watchpoint
->set
)
1320 cortex_m3_set_watchpoint(target
, watchpoint
);
1321 watchpoint
= watchpoint
->next
;
1325 static int cortex_m3_load_core_reg_u32(struct target
*target
,
1326 enum armv7m_regtype type
, uint32_t num
, uint32_t * value
)
1329 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1330 struct swjdp_common
*swjdp
= &armv7m
->swjdp_info
;
1332 /* NOTE: we "know" here that the register identifiers used
1333 * in the v7m header match the Cortex-M3 Debug Core Register
1334 * Selector values for R0..R15, xPSR, MSP, and PSP.
1338 /* read a normal core register */
1339 retval
= cortexm3_dap_read_coreregister_u32(swjdp
, value
, num
);
1341 if (retval
!= ERROR_OK
)
1343 LOG_ERROR("JTAG failure %i",retval
);
1344 return ERROR_JTAG_DEVICE_ERROR
;
1346 LOG_DEBUG("load from core reg %i value 0x%" PRIx32
"",(int)num
,*value
);
1349 case ARMV7M_PRIMASK
:
1350 case ARMV7M_BASEPRI
:
1351 case ARMV7M_FAULTMASK
:
1352 case ARMV7M_CONTROL
:
1353 /* Cortex-M3 packages these four registers as bitfields
1354 * in one Debug Core register. So say r0 and r2 docs;
1355 * it was removed from r1 docs, but still works.
1357 cortexm3_dap_read_coreregister_u32(swjdp
, value
, 20);
1361 case ARMV7M_PRIMASK
:
1362 *value
= buf_get_u32((uint8_t*)value
, 0, 1);
1365 case ARMV7M_BASEPRI
:
1366 *value
= buf_get_u32((uint8_t*)value
, 8, 8);
1369 case ARMV7M_FAULTMASK
:
1370 *value
= buf_get_u32((uint8_t*)value
, 16, 1);
1373 case ARMV7M_CONTROL
:
1374 *value
= buf_get_u32((uint8_t*)value
, 24, 2);
1378 LOG_DEBUG("load from special reg %i value 0x%" PRIx32
"", (int)num
, *value
);
1382 return ERROR_INVALID_ARGUMENTS
;
1388 static int cortex_m3_store_core_reg_u32(struct target
*target
,
1389 enum armv7m_regtype type
, uint32_t num
, uint32_t value
)
1393 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1394 struct swjdp_common
*swjdp
= &armv7m
->swjdp_info
;
1396 #ifdef ARMV7_GDB_HACKS
1397 /* If the LR register is being modified, make sure it will put us
1398 * in "thumb" mode, or an INVSTATE exception will occur. This is a
1399 * hack to deal with the fact that gdb will sometimes "forge"
1400 * return addresses, and doesn't set the LSB correctly (i.e., when
1401 * printing expressions containing function calls, it sets LR = 0.)
1402 * Valid exception return codes have bit 0 set too.
1404 if (num
== ARMV7M_R14
)
1408 /* NOTE: we "know" here that the register identifiers used
1409 * in the v7m header match the Cortex-M3 Debug Core Register
1410 * Selector values for R0..R15, xPSR, MSP, and PSP.
1414 retval
= cortexm3_dap_write_coreregister_u32(swjdp
, value
, num
);
1415 if (retval
!= ERROR_OK
)
1419 LOG_ERROR("JTAG failure %i", retval
);
1420 r
= armv7m
->core_cache
->reg_list
+ num
;
1421 r
->dirty
= r
->valid
;
1422 return ERROR_JTAG_DEVICE_ERROR
;
1424 LOG_DEBUG("write core reg %i value 0x%" PRIx32
"", (int)num
, value
);
1427 case ARMV7M_PRIMASK
:
1428 case ARMV7M_BASEPRI
:
1429 case ARMV7M_FAULTMASK
:
1430 case ARMV7M_CONTROL
:
1431 /* Cortex-M3 packages these four registers as bitfields
1432 * in one Debug Core register. So say r0 and r2 docs;
1433 * it was removed from r1 docs, but still works.
1435 cortexm3_dap_read_coreregister_u32(swjdp
, ®
, 20);
1439 case ARMV7M_PRIMASK
:
1440 buf_set_u32((uint8_t*)®
, 0, 1, value
);
1443 case ARMV7M_BASEPRI
:
1444 buf_set_u32((uint8_t*)®
, 8, 8, value
);
1447 case ARMV7M_FAULTMASK
:
1448 buf_set_u32((uint8_t*)®
, 16, 1, value
);
1451 case ARMV7M_CONTROL
:
1452 buf_set_u32((uint8_t*)®
, 24, 2, value
);
1456 cortexm3_dap_write_coreregister_u32(swjdp
, reg
, 20);
1458 LOG_DEBUG("write special reg %i value 0x%" PRIx32
" ", (int)num
, value
);
1462 return ERROR_INVALID_ARGUMENTS
;
1468 static int cortex_m3_read_memory(struct target
*target
, uint32_t address
,
1469 uint32_t size
, uint32_t count
, uint8_t *buffer
)
1471 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1472 struct swjdp_common
*swjdp
= &armv7m
->swjdp_info
;
1473 int retval
= ERROR_INVALID_ARGUMENTS
;
1475 /* cortex_m3 handles unaligned memory access */
1476 if (count
&& buffer
) {
1479 retval
= mem_ap_read_buf_u32(swjdp
, buffer
, 4 * count
, address
);
1482 retval
= mem_ap_read_buf_u16(swjdp
, buffer
, 2 * count
, address
);
1485 retval
= mem_ap_read_buf_u8(swjdp
, buffer
, count
, address
);
1493 static int cortex_m3_write_memory(struct target
*target
, uint32_t address
,
1494 uint32_t size
, uint32_t count
, uint8_t *buffer
)
1496 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1497 struct swjdp_common
*swjdp
= &armv7m
->swjdp_info
;
1498 int retval
= ERROR_INVALID_ARGUMENTS
;
1500 if (count
&& buffer
) {
1503 retval
= mem_ap_write_buf_u32(swjdp
, buffer
, 4 * count
, address
);
1506 retval
= mem_ap_write_buf_u16(swjdp
, buffer
, 2 * count
, address
);
1509 retval
= mem_ap_write_buf_u8(swjdp
, buffer
, count
, address
);
1517 static int cortex_m3_bulk_write_memory(struct target
*target
, uint32_t address
,
1518 uint32_t count
, uint8_t *buffer
)
1520 return cortex_m3_write_memory(target
, address
, 4, count
, buffer
);
1523 static int cortex_m3_init_target(struct command_context
*cmd_ctx
,
1524 struct target
*target
)
1526 armv7m_build_reg_cache(target
);
1530 /* REVISIT cache valid/dirty bits are unmaintained. We could set "valid"
1531 * on r/w if the core is not running, and clear on resume or reset ... or
1532 * at least, in a post_restore_context() method.
1535 struct dwt_reg_state
{
1536 struct target
*target
;
1538 uint32_t value
; /* scratch/cache */
1541 static int cortex_m3_dwt_get_reg(struct reg
*reg
)
1543 struct dwt_reg_state
*state
= reg
->arch_info
;
1545 return target_read_u32(state
->target
, state
->addr
, &state
->value
);
1548 static int cortex_m3_dwt_set_reg(struct reg
*reg
, uint8_t *buf
)
1550 struct dwt_reg_state
*state
= reg
->arch_info
;
1552 return target_write_u32(state
->target
, state
->addr
,
1553 buf_get_u32(buf
, 0, reg
->size
));
1562 static struct dwt_reg dwt_base_regs
[] = {
1563 { DWT_CTRL
, "dwt_ctrl", 32, },
1564 /* NOTE that Erratum 532314 (fixed r2p0) affects CYCCNT: it wrongly
1565 * increments while the core is asleep.
1567 { DWT_CYCCNT
, "dwt_cyccnt", 32, },
1568 /* plus some 8 bit counters, useful for profiling with TPIU */
1571 static struct dwt_reg dwt_comp
[] = {
1572 #define DWT_COMPARATOR(i) \
1573 { DWT_COMP0 + 0x10 * (i), "dwt_" #i "_comp", 32, }, \
1574 { DWT_MASK0 + 0x10 * (i), "dwt_" #i "_mask", 4, }, \
1575 { DWT_FUNCTION0 + 0x10 * (i), "dwt_" #i "_function", 32, }
1580 #undef DWT_COMPARATOR
1583 static const struct reg_arch_type dwt_reg_type
= {
1584 .get
= cortex_m3_dwt_get_reg
,
1585 .set
= cortex_m3_dwt_set_reg
,
1589 cortex_m3_dwt_addreg(struct target
*t
, struct reg
*r
, struct dwt_reg
*d
)
1591 struct dwt_reg_state
*state
;
1593 state
= calloc(1, sizeof *state
);
1596 state
->addr
= d
->addr
;
1601 r
->value
= &state
->value
;
1602 r
->arch_info
= state
;
1603 r
->type
= &dwt_reg_type
;
1607 cortex_m3_dwt_setup(struct cortex_m3_common
*cm3
, struct target
*target
)
1610 struct reg_cache
*cache
;
1611 struct cortex_m3_dwt_comparator
*comparator
;
1614 target_read_u32(target
, DWT_CTRL
, &dwtcr
);
1616 LOG_DEBUG("no DWT");
1620 cm3
->dwt_num_comp
= (dwtcr
>> 28) & 0xF;
1621 cm3
->dwt_comp_available
= cm3
->dwt_num_comp
;
1622 cm3
->dwt_comparator_list
= calloc(cm3
->dwt_num_comp
,
1623 sizeof(struct cortex_m3_dwt_comparator
));
1624 if (!cm3
->dwt_comparator_list
) {
1626 cm3
->dwt_num_comp
= 0;
1627 LOG_ERROR("out of mem");
1631 cache
= calloc(1, sizeof *cache
);
1634 free(cm3
->dwt_comparator_list
);
1637 cache
->name
= "cortex-m3 dwt registers";
1638 cache
->num_regs
= 2 + cm3
->dwt_num_comp
* 3;
1639 cache
->reg_list
= calloc(cache
->num_regs
, sizeof *cache
->reg_list
);
1640 if (!cache
->reg_list
) {
1645 for (reg
= 0; reg
< 2; reg
++)
1646 cortex_m3_dwt_addreg(target
, cache
->reg_list
+ reg
,
1647 dwt_base_regs
+ reg
);
1649 comparator
= cm3
->dwt_comparator_list
;
1650 for (i
= 0; i
< cm3
->dwt_num_comp
; i
++, comparator
++) {
1653 comparator
->dwt_comparator_address
= DWT_COMP0
+ 0x10 * i
;
1654 for (j
= 0; j
< 3; j
++, reg
++)
1655 cortex_m3_dwt_addreg(target
, cache
->reg_list
+ reg
,
1656 dwt_comp
+ 3 * i
+ j
);
1659 *register_get_last_cache_p(&target
->reg_cache
) = cache
;
1660 cm3
->dwt_cache
= cache
;
1662 LOG_DEBUG("DWT dwtcr 0x%" PRIx32
", comp %d, watch%s",
1663 dwtcr
, cm3
->dwt_num_comp
,
1664 (dwtcr
& (0xf << 24)) ? " only" : "/trigger");
1666 /* REVISIT: if num_comp > 1, check whether comparator #1 can
1667 * implement single-address data value watchpoints ... so we
1668 * won't need to check it later, when asked to set one up.
1672 static int cortex_m3_examine(struct target
*target
)
1675 uint32_t cpuid
, fpcr
;
1677 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1678 struct swjdp_common
*swjdp
= &cortex_m3
->armv7m
.swjdp_info
;
1680 if ((retval
= ahbap_debugport_init(swjdp
)) != ERROR_OK
)
1683 if (!target_was_examined(target
))
1685 target_set_examined(target
);
1687 /* Read from Device Identification Registers */
1688 retval
= target_read_u32(target
, CPUID
, &cpuid
);
1689 if (retval
!= ERROR_OK
)
1692 if (((cpuid
>> 4) & 0xc3f) == 0xc23)
1693 LOG_DEBUG("Cortex-M3 r%" PRId8
"p%" PRId8
" processor detected",
1694 (uint8_t)((cpuid
>> 20) & 0xf), (uint8_t)((cpuid
>> 0) & 0xf));
1695 LOG_DEBUG("cpuid: 0x%8.8" PRIx32
"", cpuid
);
1697 /* NOTE: FPB and DWT are both optional. */
1700 target_read_u32(target
, FP_CTRL
, &fpcr
);
1701 cortex_m3
->auto_bp_type
= 1;
1702 cortex_m3
->fp_num_code
= ((fpcr
>> 8) & 0x70) | ((fpcr
>> 4) & 0xF); /* bits [14:12] and [7:4] */
1703 cortex_m3
->fp_num_lit
= (fpcr
>> 8) & 0xF;
1704 cortex_m3
->fp_code_available
= cortex_m3
->fp_num_code
;
1705 cortex_m3
->fp_comparator_list
= calloc(cortex_m3
->fp_num_code
+ cortex_m3
->fp_num_lit
, sizeof(struct cortex_m3_fp_comparator
));
1706 cortex_m3
->fpb_enabled
= fpcr
& 1;
1707 for (i
= 0; i
< cortex_m3
->fp_num_code
+ cortex_m3
->fp_num_lit
; i
++)
1709 cortex_m3
->fp_comparator_list
[i
].type
= (i
< cortex_m3
->fp_num_code
) ? FPCR_CODE
: FPCR_LITERAL
;
1710 cortex_m3
->fp_comparator_list
[i
].fpcr_address
= FP_COMP0
+ 4 * i
;
1712 LOG_DEBUG("FPB fpcr 0x%" PRIx32
", numcode %i, numlit %i", fpcr
, cortex_m3
->fp_num_code
, cortex_m3
->fp_num_lit
);
1715 cortex_m3_dwt_setup(cortex_m3
, target
);
1717 /* These hardware breakpoints only work for code in flash! */
1718 LOG_INFO("%s: hardware has %d breakpoints, %d watchpoints",
1719 target_name(target
),
1720 cortex_m3
->fp_num_code
,
1721 cortex_m3
->dwt_num_comp
);
1727 static int cortex_m3_dcc_read(struct swjdp_common
*swjdp
, uint8_t *value
, uint8_t *ctrl
)
1731 mem_ap_read_buf_u16(swjdp
, (uint8_t*)&dcrdr
, 1, DCB_DCRDR
);
1732 *ctrl
= (uint8_t)dcrdr
;
1733 *value
= (uint8_t)(dcrdr
>> 8);
1735 LOG_DEBUG("data 0x%x ctrl 0x%x", *value
, *ctrl
);
1737 /* write ack back to software dcc register
1738 * signify we have read data */
1739 if (dcrdr
& (1 << 0))
1742 mem_ap_write_buf_u16(swjdp
, (uint8_t*)&dcrdr
, 1, DCB_DCRDR
);
1748 static int cortex_m3_target_request_data(struct target
*target
,
1749 uint32_t size
, uint8_t *buffer
)
1751 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1752 struct swjdp_common
*swjdp
= &armv7m
->swjdp_info
;
1757 for (i
= 0; i
< (size
* 4); i
++)
1759 cortex_m3_dcc_read(swjdp
, &data
, &ctrl
);
1766 static int cortex_m3_handle_target_request(void *priv
)
1768 struct target
*target
= priv
;
1769 if (!target_was_examined(target
))
1771 struct armv7m_common
*armv7m
= target_to_armv7m(target
);
1772 struct swjdp_common
*swjdp
= &armv7m
->swjdp_info
;
1774 if (!target
->dbg_msg_enabled
)
1777 if (target
->state
== TARGET_RUNNING
)
1782 cortex_m3_dcc_read(swjdp
, &data
, &ctrl
);
1784 /* check if we have data */
1785 if (ctrl
& (1 << 0))
1789 /* we assume target is quick enough */
1791 cortex_m3_dcc_read(swjdp
, &data
, &ctrl
);
1792 request
|= (data
<< 8);
1793 cortex_m3_dcc_read(swjdp
, &data
, &ctrl
);
1794 request
|= (data
<< 16);
1795 cortex_m3_dcc_read(swjdp
, &data
, &ctrl
);
1796 request
|= (data
<< 24);
1797 target_request(target
, request
);
1804 static int cortex_m3_init_arch_info(struct target
*target
,
1805 struct cortex_m3_common
*cortex_m3
, struct jtag_tap
*tap
)
1808 struct armv7m_common
*armv7m
= &cortex_m3
->armv7m
;
1810 armv7m_init_arch_info(target
, armv7m
);
1812 /* prepare JTAG information for the new target */
1813 cortex_m3
->jtag_info
.tap
= tap
;
1814 cortex_m3
->jtag_info
.scann_size
= 4;
1816 armv7m
->swjdp_info
.dp_select_value
= -1;
1817 armv7m
->swjdp_info
.ap_csw_value
= -1;
1818 armv7m
->swjdp_info
.ap_tar_value
= -1;
1819 armv7m
->swjdp_info
.jtag_info
= &cortex_m3
->jtag_info
;
1820 armv7m
->swjdp_info
.memaccess_tck
= 8;
1821 armv7m
->swjdp_info
.tar_autoincr_block
= (1 << 12); /* Cortex-M3 has 4096 bytes autoincrement range */
1823 /* register arch-specific functions */
1824 armv7m
->examine_debug_reason
= cortex_m3_examine_debug_reason
;
1826 armv7m
->post_debug_entry
= NULL
;
1828 armv7m
->pre_restore_context
= NULL
;
1829 armv7m
->post_restore_context
= NULL
;
1831 armv7m
->load_core_reg_u32
= cortex_m3_load_core_reg_u32
;
1832 armv7m
->store_core_reg_u32
= cortex_m3_store_core_reg_u32
;
1834 target_register_timer_callback(cortex_m3_handle_target_request
, 1, 1, target
);
1836 if ((retval
= arm_jtag_setup_connection(&cortex_m3
->jtag_info
)) != ERROR_OK
)
1844 static int cortex_m3_target_create(struct target
*target
, Jim_Interp
*interp
)
1846 struct cortex_m3_common
*cortex_m3
= calloc(1,sizeof(struct cortex_m3_common
));
1848 cortex_m3
->common_magic
= CORTEX_M3_COMMON_MAGIC
;
1849 cortex_m3_init_arch_info(target
, cortex_m3
, target
->tap
);
1854 /*--------------------------------------------------------------------------*/
1856 static int cortex_m3_verify_pointer(struct command_context
*cmd_ctx
,
1857 struct cortex_m3_common
*cm3
)
1859 if (cm3
->common_magic
!= CORTEX_M3_COMMON_MAGIC
) {
1860 command_print(cmd_ctx
, "target is not a Cortex-M3");
1861 return ERROR_TARGET_INVALID
;
1867 * Only stuff below this line should need to verify that its target
1868 * is a Cortex-M3. Everything else should have indirected through the
1869 * cortexm3_target structure, which is only used with CM3 targets.
1873 * REVISIT Thumb2 disassembly should work for all ARMv7 cores, as well
1874 * as at least ARM-1156T2. The interesting thing about Cortex-M is
1875 * that *only* Thumb2 disassembly matters. There are also some small
1876 * additions to Thumb2 that are specific to ARMv7-M.
1878 COMMAND_HANDLER(handle_cortex_m3_disassemble_command
)
1881 struct target
*target
= get_current_target(CMD_CTX
);
1882 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1884 unsigned long count
= 1;
1885 struct arm_instruction cur_instruction
;
1887 retval
= cortex_m3_verify_pointer(CMD_CTX
, cortex_m3
);
1888 if (retval
!= ERROR_OK
)
1894 COMMAND_PARSE_NUMBER(ulong
, CMD_ARGV
[1], count
);
1897 COMMAND_PARSE_NUMBER(u32
, CMD_ARGV
[0], address
);
1900 command_print(CMD_CTX
,
1901 "usage: cortex_m3 disassemble <address> [<count>]");
1906 retval
= thumb2_opcode(target
, address
, &cur_instruction
);
1907 if (retval
!= ERROR_OK
)
1909 command_print(CMD_CTX
, "%s", cur_instruction
.text
);
1910 address
+= cur_instruction
.instruction_size
;
1916 static const struct {
1920 { "hard_err", VC_HARDERR
, },
1921 { "int_err", VC_INTERR
, },
1922 { "bus_err", VC_BUSERR
, },
1923 { "state_err", VC_STATERR
, },
1924 { "chk_err", VC_CHKERR
, },
1925 { "nocp_err", VC_NOCPERR
, },
1926 { "mm_err", VC_MMERR
, },
1927 { "reset", VC_CORERESET
, },
1930 COMMAND_HANDLER(handle_cortex_m3_vector_catch_command
)
1932 struct target
*target
= get_current_target(CMD_CTX
);
1933 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
1934 struct armv7m_common
*armv7m
= &cortex_m3
->armv7m
;
1935 struct swjdp_common
*swjdp
= &armv7m
->swjdp_info
;
1939 retval
= cortex_m3_verify_pointer(CMD_CTX
, cortex_m3
);
1940 if (retval
!= ERROR_OK
)
1943 mem_ap_read_atomic_u32(swjdp
, DCB_DEMCR
, &demcr
);
1948 if (CMD_ARGC
== 1) {
1949 if (strcmp(CMD_ARGV
[0], "all") == 0) {
1950 catch = VC_HARDERR
| VC_INTERR
| VC_BUSERR
1951 | VC_STATERR
| VC_CHKERR
| VC_NOCPERR
1952 | VC_MMERR
| VC_CORERESET
;
1954 } else if (strcmp(CMD_ARGV
[0], "none") == 0) {
1958 while (CMD_ARGC
-- > 0) {
1960 for (i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++) {
1961 if (strcmp(CMD_ARGV
[CMD_ARGC
], vec_ids
[i
].name
) != 0)
1963 catch |= vec_ids
[i
].mask
;
1966 if (i
== ARRAY_SIZE(vec_ids
)) {
1967 LOG_ERROR("No CM3 vector '%s'", CMD_ARGV
[CMD_ARGC
]);
1968 return ERROR_INVALID_ARGUMENTS
;
1972 /* For now, armv7m->demcr only stores vector catch flags. */
1973 armv7m
->demcr
= catch;
1978 /* write, but don't assume it stuck (why not??) */
1979 mem_ap_write_u32(swjdp
, DCB_DEMCR
, demcr
);
1980 mem_ap_read_atomic_u32(swjdp
, DCB_DEMCR
, &demcr
);
1982 /* FIXME be sure to clear DEMCR on clean server shutdown.
1983 * Otherwise the vector catch hardware could fire when there's
1984 * no debugger hooked up, causing much confusion...
1988 for (unsigned i
= 0; i
< ARRAY_SIZE(vec_ids
); i
++)
1990 command_print(CMD_CTX
, "%9s: %s", vec_ids
[i
].name
,
1991 (demcr
& vec_ids
[i
].mask
) ? "catch" : "ignore");
1997 COMMAND_HANDLER(handle_cortex_m3_mask_interrupts_command
)
1999 struct target
*target
= get_current_target(CMD_CTX
);
2000 struct cortex_m3_common
*cortex_m3
= target_to_cm3(target
);
2003 retval
= cortex_m3_verify_pointer(CMD_CTX
, cortex_m3
);
2004 if (retval
!= ERROR_OK
)
2007 if (target
->state
!= TARGET_HALTED
)
2009 command_print(CMD_CTX
, "target must be stopped for \"%s\" command", CMD_NAME
);
2016 COMMAND_PARSE_ON_OFF(CMD_ARGV
[0], enable
);
2017 uint32_t mask_on
= C_HALT
| (enable
? C_MASKINTS
: 0);
2018 uint32_t mask_off
= enable
? 0 : C_MASKINTS
;
2019 cortex_m3_write_debug_halt_mask(target
, mask_on
, mask_off
);
2022 command_print(CMD_CTX
, "cortex_m3 interrupt mask %s",
2023 (cortex_m3
->dcb_dhcsr
& C_MASKINTS
) ? "on" : "off");
2028 static const struct command_registration cortex_m3_exec_command_handlers
[] = {
2030 .name
= "disassemble",
2031 .handler
= handle_cortex_m3_disassemble_command
,
2032 .mode
= COMMAND_EXEC
,
2033 .help
= "disassemble Thumb2 instructions",
2034 .usage
= "address [count]",
2038 .handler
= handle_cortex_m3_mask_interrupts_command
,
2039 .mode
= COMMAND_EXEC
,
2040 .help
= "mask cortex_m3 interrupts",
2041 .usage
= "['on'|'off']",
2044 .name
= "vector_catch",
2045 .handler
= handle_cortex_m3_vector_catch_command
,
2046 .mode
= COMMAND_EXEC
,
2047 .help
= "configure hardware vectors to trigger debug entry",
2048 .usage
= "['all'|'none'|('bus_err'|'chk_err'|...)*]",
2050 COMMAND_REGISTRATION_DONE
2052 static const struct command_registration cortex_m3_command_handlers
[] = {
2054 .chain
= armv7m_command_handlers
,
2057 .name
= "cortex_m3",
2058 .mode
= COMMAND_EXEC
,
2059 .help
= "Cortex-M3 command group",
2060 .chain
= cortex_m3_exec_command_handlers
,
2062 COMMAND_REGISTRATION_DONE
2065 struct target_type cortexm3_target
=
2067 .name
= "cortex_m3",
2069 .poll
= cortex_m3_poll
,
2070 .arch_state
= armv7m_arch_state
,
2072 .target_request_data
= cortex_m3_target_request_data
,
2074 .halt
= cortex_m3_halt
,
2075 .resume
= cortex_m3_resume
,
2076 .step
= cortex_m3_step
,
2078 .assert_reset
= cortex_m3_assert_reset
,
2079 .deassert_reset
= cortex_m3_deassert_reset
,
2080 .soft_reset_halt
= cortex_m3_soft_reset_halt
,
2082 .get_gdb_reg_list
= armv7m_get_gdb_reg_list
,
2084 .read_memory
= cortex_m3_read_memory
,
2085 .write_memory
= cortex_m3_write_memory
,
2086 .bulk_write_memory
= cortex_m3_bulk_write_memory
,
2087 .checksum_memory
= armv7m_checksum_memory
,
2088 .blank_check_memory
= armv7m_blank_check_memory
,
2090 .run_algorithm
= armv7m_run_algorithm
,
2092 .add_breakpoint
= cortex_m3_add_breakpoint
,
2093 .remove_breakpoint
= cortex_m3_remove_breakpoint
,
2094 .add_watchpoint
= cortex_m3_add_watchpoint
,
2095 .remove_watchpoint
= cortex_m3_remove_watchpoint
,
2097 .commands
= cortex_m3_command_handlers
,
2098 .target_create
= cortex_m3_target_create
,
2099 .init_target
= cortex_m3_init_target
,
2100 .examine
= cortex_m3_examine
,
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)