1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
19 ***************************************************************************/
27 #include "arm7_9_common.h"
28 #include "arm_disassembler.h"
32 * ARM "Embedded Trace Macrocell" (ETM) support -- direct JTAG access.
34 * ETM modules collect instruction and/or data trace information, compress
35 * it, and transfer it to a debugging host through either a (buffered) trace
36 * port (often a 38-pin Mictor connector) or an Embedded Trace Buffer (ETB).
38 * There are several generations of these modules. Original versions have
39 * JTAG access through a dedicated scan chain. Recent versions have added
40 * access via coprocessor instructions, memory addressing, and the ARM Debug
41 * Interface v5 (ADIv5); and phased out direct JTAG access.
43 * This code supports up to the ETMv1.3 architecture, as seen in ETM9 and
44 * most common ARM9 systems. Note: "CoreSight ETM9" implements ETMv3.2,
45 * implying non-JTAG connectivity options.
47 * Relevant documentation includes:
48 * ARM DDI 0157G ... ETM9 (r2p2) Technical Reference Manual
49 * ARM DDI 0315B ... CoreSight ETM9 (r0p1) Technical Reference Manual
50 * ARM IHI 0014O ... Embedded Trace Macrocell, Architecture Specification
53 #define ARRAY_SIZE(x) ((int)(sizeof(x)/sizeof((x)[0])))
63 uint8_t size
; /* low-N of 32 bits */
64 uint8_t mode
; /* RO, WO, RW */
65 uint8_t bcd_vers
; /* 1.0, 2.0, etc */
70 * Registers 0..0x7f are JTAG-addressable using scanchain 6.
71 * (Or on some processors, through coprocessor operations.)
72 * Newer versions of ETM make some W/O registers R/W, and
73 * provide definitions for some previously-unused bits.
76 /* basic registers that are always there given the right ETM version */
77 static const struct etm_reg_info etm_core
[] = {
78 /* NOTE: we "know" ETM_CONFIG is listed first */
79 { ETM_CONFIG
, 32, RO
, 0x10, "ETM_config", },
81 /* ETM Trace Registers */
82 { ETM_CTRL
, 32, RW
, 0x10, "ETM_ctrl", },
83 { ETM_TRIG_EVENT
, 17, WO
, 0x10, "ETM_trig_event", },
84 { ETM_ASIC_CTRL
, 8, WO
, 0x10, "ETM_asic_ctrl", },
85 { ETM_STATUS
, 3, RO
, 0x11, "ETM_status", },
86 { ETM_SYS_CONFIG
, 9, RO
, 0x12, "ETM_sys_config", },
88 /* TraceEnable configuration */
89 { ETM_TRACE_RESOURCE_CTRL
, 32, WO
, 0x12, "ETM_trace_resource_ctrl", },
90 { ETM_TRACE_EN_CTRL2
, 16, WO
, 0x12, "ETM_trace_en_ctrl2", },
91 { ETM_TRACE_EN_EVENT
, 17, WO
, 0x10, "ETM_trace_en_event", },
92 { ETM_TRACE_EN_CTRL1
, 26, WO
, 0x10, "ETM_trace_en_ctrl1", },
94 /* ViewData configuration (data trace) */
95 { ETM_VIEWDATA_EVENT
, 17, WO
, 0x10, "ETM_viewdata_event", },
96 { ETM_VIEWDATA_CTRL1
, 32, WO
, 0x10, "ETM_viewdata_ctrl1", },
97 { ETM_VIEWDATA_CTRL2
, 32, WO
, 0x10, "ETM_viewdata_ctrl2", },
98 { ETM_VIEWDATA_CTRL3
, 17, WO
, 0x10, "ETM_viewdata_ctrl3", },
100 /* REVISIT exclude VIEWDATA_CTRL2 when it's not there */
102 { 0x78, 12, WO
, 0x20, "ETM_sync_freq", },
103 { 0x79, 32, RO
, 0x20, "ETM_id", },
106 static const struct etm_reg_info etm_fifofull
[] = {
107 /* FIFOFULL configuration */
108 { ETM_FIFOFULL_REGION
, 25, WO
, 0x10, "ETM_fifofull_region", },
109 { ETM_FIFOFULL_LEVEL
, 8, WO
, 0x10, "ETM_fifofull_level", },
112 static const struct etm_reg_info etm_addr_comp
[] = {
113 /* Address comparator register pairs */
114 #define ADDR_COMPARATOR(i) \
115 { ETM_ADDR_COMPARATOR_VALUE + (i) - 1, 32, WO, 0x10, \
116 "ETM_addr_" #i "_comparator_value", }, \
117 { ETM_ADDR_ACCESS_TYPE + (i) - 1, 7, WO, 0x10, \
118 "ETM_addr_" #i "_access_type", }
136 #undef ADDR_COMPARATOR
139 static const struct etm_reg_info etm_data_comp
[] = {
140 /* Data Value Comparators (NOTE: odd addresses are reserved) */
141 #define DATA_COMPARATOR(i) \
142 { ETM_DATA_COMPARATOR_VALUE + 2*(i) - 1, 32, WO, 0x10, \
143 "ETM_data_" #i "_comparator_value", }, \
144 { ETM_DATA_COMPARATOR_MASK + 2*(i) - 1, 32, WO, 0x10, \
145 "ETM_data_" #i "_comparator_mask", }
154 #undef DATA_COMPARATOR
157 static const struct etm_reg_info etm_counters
[] = {
158 #define ETM_COUNTER(i) \
159 { ETM_COUNTER_RELOAD_VALUE + (i) - 1, 16, WO, 0x10, \
160 "ETM_counter_" #i "_reload_value", }, \
161 { ETM_COUNTER_ENABLE + (i) - 1, 18, WO, 0x10, \
162 "ETM_counter_" #i "_enable", }, \
163 { ETM_COUNTER_RELOAD_EVENT + (i) - 1, 17, WO, 0x10, \
164 "ETM_counter_" #i "_reload_event", }, \
165 { ETM_COUNTER_VALUE + (i) - 1, 16, RO, 0x10, \
166 "ETM_counter_" #i "_value", }
174 static const struct etm_reg_info etm_sequencer
[] = {
176 { ETM_SEQUENCER_EVENT + (i), 17, WO, 0x10, \
177 "ETM_sequencer_event" #i, }
178 ETM_SEQ(0), /* 1->2 */
179 ETM_SEQ(1), /* 2->1 */
180 ETM_SEQ(2), /* 2->3 */
181 ETM_SEQ(3), /* 3->1 */
182 ETM_SEQ(4), /* 3->2 */
183 ETM_SEQ(5), /* 1->3 */
186 { ETM_SEQUENCER_STATE
, 2, RO
, 0x10, "ETM_sequencer_state", },
189 static const struct etm_reg_info etm_outputs
[] = {
190 #define ETM_OUTPUT(i) \
191 { ETM_EXTERNAL_OUTPUT + (i) - 1, 17, WO, 0x10, \
192 "ETM_external_output" #i, }
202 /* registers from 0x6c..0x7f were added after ETMv1.3 */
204 /* Context ID Comparators */
205 { 0x6c, 32, RO
, 0x20, "ETM_contextid_comparator_value1", }
206 { 0x6d, 32, RO
, 0x20, "ETM_contextid_comparator_value2", }
207 { 0x6e, 32, RO
, 0x20, "ETM_contextid_comparator_value3", }
208 { 0x6f, 32, RO
, 0x20, "ETM_contextid_comparator_mask", }
211 static int etm_reg_arch_type
= -1;
213 static int etm_get_reg(reg_t
*reg
);
214 static int etm_read_reg_w_check(reg_t
*reg
,
215 uint8_t* check_value
, uint8_t* check_mask
);
216 static int etm_register_user_commands(struct command_context_s
*cmd_ctx
);
217 static int etm_set_reg_w_exec(reg_t
*reg
, uint8_t *buf
);
218 static int etm_write_reg(reg_t
*reg
, uint32_t value
);
220 static command_t
*etm_cmd
;
223 /* Look up register by ID ... most ETM instances only
224 * support a subset of the possible registers.
226 static reg_t
*etm_reg_lookup(etm_context_t
*etm_ctx
, unsigned id
)
228 reg_cache_t
*cache
= etm_ctx
->reg_cache
;
231 for (i
= 0; i
< cache
->num_regs
; i
++) {
232 struct etm_reg_s
*reg
= cache
->reg_list
[i
].arch_info
;
234 if (reg
->reg_info
->addr
== id
)
235 return &cache
->reg_list
[i
];
238 /* caller asking for nonexistent register is a bug! */
239 /* REVISIT say which of the N targets was involved */
240 LOG_ERROR("ETM: register 0x%02x not available", id
);
244 static void etm_reg_add(unsigned bcd_vers
, arm_jtag_t
*jtag_info
,
245 reg_cache_t
*cache
, etm_reg_t
*ereg
,
246 const struct etm_reg_info
*r
, unsigned nreg
)
248 reg_t
*reg
= cache
->reg_list
;
250 reg
+= cache
->num_regs
;
251 ereg
+= cache
->num_regs
;
253 /* add up to "nreg" registers from "r", if supported by this
254 * version of the ETM, to the specified cache.
256 for (; nreg
--; r
++) {
258 /* this ETM may be too old to have some registers */
259 if (r
->bcd_vers
> bcd_vers
)
264 reg
->value
= &ereg
->value
;
265 reg
->arch_info
= ereg
;
266 reg
->arch_type
= etm_reg_arch_type
;
271 ereg
->jtag_info
= jtag_info
;
276 reg_cache_t
*etm_build_reg_cache(target_t
*target
,
277 arm_jtag_t
*jtag_info
, etm_context_t
*etm_ctx
)
279 reg_cache_t
*reg_cache
= malloc(sizeof(reg_cache_t
));
280 reg_t
*reg_list
= NULL
;
281 etm_reg_t
*arch_info
= NULL
;
282 unsigned bcd_vers
, config
;
284 /* register a register arch-type for etm registers only once */
285 if (etm_reg_arch_type
== -1)
286 etm_reg_arch_type
= register_reg_arch_type(etm_get_reg
,
289 /* the actual registers are kept in two arrays */
290 reg_list
= calloc(128, sizeof(reg_t
));
291 arch_info
= calloc(128, sizeof(etm_reg_t
));
293 /* fill in values for the reg cache */
294 reg_cache
->name
= "etm registers";
295 reg_cache
->next
= NULL
;
296 reg_cache
->reg_list
= reg_list
;
297 reg_cache
->num_regs
= 0;
299 /* add ETM_CONFIG, then parse its values to see
300 * which other registers exist in this ETM
302 etm_reg_add(0x10, jtag_info
, reg_cache
, arch_info
,
305 etm_get_reg(reg_list
);
306 etm_ctx
->config
= buf_get_u32((void *)&arch_info
->value
, 0, 32);
307 config
= etm_ctx
->config
;
309 /* figure ETM version then add base registers */
310 if (config
& (1 << 31)) {
312 LOG_WARNING("ETMv2+ support is incomplete");
314 /* REVISIT read ID register, distinguish ETMv3.3 etc;
315 * don't presume trace start/stop support is present;
316 * and include any context ID comparator registers.
319 switch (config
>> 28) {
336 LOG_WARNING("Bad ETMv1 protocol %d", config
>> 28);
343 etm_ctx
->bcd_vers
= bcd_vers
;
344 LOG_INFO("ETM v%d.%d", bcd_vers
>> 4, bcd_vers
& 0xf);
346 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
347 etm_core
+ 1, ARRAY_SIZE(etm_core
) - 1);
349 /* address and data comparators; counters; outputs */
350 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
351 etm_addr_comp
, 4 * (0x0f & (config
>> 0)));
352 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
353 etm_data_comp
, 2 * (0x0f & (config
>> 4)));
354 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
355 etm_counters
, 4 * (0x07 & (config
>> 13)));
356 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
357 etm_outputs
, (0x07 & (config
>> 20)));
359 /* FIFOFULL presence is optional
360 * REVISIT for ETMv1.2 and later, don't bother adding this
361 * unless ETM_SYS_CONFIG says it's also *supported* ...
363 if (config
& (1 << 23))
364 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
365 etm_fifofull
, ARRAY_SIZE(etm_fifofull
));
367 /* sequencer is optional (for state-dependant triggering) */
368 if (config
& (1 << 16))
369 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
370 etm_sequencer
, ARRAY_SIZE(etm_sequencer
));
372 /* REVISIT could realloc and likely save half the memory
373 * in the two chunks we allocated...
376 /* the ETM might have an ETB connected */
377 if (strcmp(etm_ctx
->capture_driver
->name
, "etb") == 0)
379 etb_t
*etb
= etm_ctx
->capture_driver_priv
;
383 LOG_ERROR("etb selected as etm capture driver, but no ETB configured");
390 reg_cache
->next
= etb_build_reg_cache(etb
);
392 etb
->reg_cache
= reg_cache
->next
;
399 static int etm_read_reg(reg_t
*reg
)
401 return etm_read_reg_w_check(reg
, NULL
, NULL
);
404 static int etm_store_reg(reg_t
*reg
)
406 return etm_write_reg(reg
, buf_get_u32(reg
->value
, 0, reg
->size
));
409 int etm_setup(target_t
*target
)
412 uint32_t etm_ctrl_value
;
413 armv4_5_common_t
*armv4_5
= target
->arch_info
;
414 arm7_9_common_t
*arm7_9
= armv4_5
->arch_info
;
415 etm_context_t
*etm_ctx
= arm7_9
->etm_ctx
;
418 etm_ctrl_reg
= etm_reg_lookup(etm_ctx
, ETM_CTRL
);
422 /* initialize some ETM control register settings */
423 etm_get_reg(etm_ctrl_reg
);
424 etm_ctrl_value
= buf_get_u32(etm_ctrl_reg
->value
, 0, etm_ctrl_reg
->size
);
426 /* clear the ETM powerdown bit (0) */
427 etm_ctrl_value
&= ~0x1;
429 /* configure port width (6:4), mode (17:16) and clocking (13) */
430 etm_ctrl_value
= (etm_ctrl_value
&
431 ~ETM_PORT_WIDTH_MASK
& ~ETM_PORT_MODE_MASK
& ~ETM_PORT_CLOCK_MASK
)
434 buf_set_u32(etm_ctrl_reg
->value
, 0, etm_ctrl_reg
->size
, etm_ctrl_value
);
435 etm_store_reg(etm_ctrl_reg
);
437 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
440 if ((retval
= etm_ctx
->capture_driver
->init(etm_ctx
)) != ERROR_OK
)
442 LOG_ERROR("ETM capture driver initialization failed");
448 static int etm_get_reg(reg_t
*reg
)
452 if ((retval
= etm_read_reg(reg
)) != ERROR_OK
)
454 LOG_ERROR("BUG: error scheduling etm register read");
458 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
460 LOG_ERROR("register read failed");
467 static int etm_read_reg_w_check(reg_t
*reg
,
468 uint8_t* check_value
, uint8_t* check_mask
)
470 etm_reg_t
*etm_reg
= reg
->arch_info
;
471 const struct etm_reg_info
*r
= etm_reg
->reg_info
;
472 uint8_t reg_addr
= r
->addr
& 0x7f;
473 scan_field_t fields
[3];
475 if (etm_reg
->reg_info
->mode
== WO
) {
476 LOG_ERROR("BUG: can't read write-only register %s", r
->name
);
477 return ERROR_INVALID_ARGUMENTS
;
480 LOG_DEBUG("%s (%u)", r
->name
, reg_addr
);
482 jtag_set_end_state(TAP_IDLE
);
483 arm_jtag_scann(etm_reg
->jtag_info
, 0x6);
484 arm_jtag_set_instr(etm_reg
->jtag_info
, etm_reg
->jtag_info
->intest_instr
, NULL
);
486 fields
[0].tap
= etm_reg
->jtag_info
->tap
;
487 fields
[0].num_bits
= 32;
488 fields
[0].out_value
= reg
->value
;
489 fields
[0].in_value
= NULL
;
490 fields
[0].check_value
= NULL
;
491 fields
[0].check_mask
= NULL
;
493 fields
[1].tap
= etm_reg
->jtag_info
->tap
;
494 fields
[1].num_bits
= 7;
495 fields
[1].out_value
= malloc(1);
496 buf_set_u32(fields
[1].out_value
, 0, 7, reg_addr
);
497 fields
[1].in_value
= NULL
;
498 fields
[1].check_value
= NULL
;
499 fields
[1].check_mask
= NULL
;
501 fields
[2].tap
= etm_reg
->jtag_info
->tap
;
502 fields
[2].num_bits
= 1;
503 fields
[2].out_value
= malloc(1);
504 buf_set_u32(fields
[2].out_value
, 0, 1, 0);
505 fields
[2].in_value
= NULL
;
506 fields
[2].check_value
= NULL
;
507 fields
[2].check_mask
= NULL
;
509 jtag_add_dr_scan(3, fields
, jtag_get_end_state());
511 fields
[0].in_value
= reg
->value
;
512 fields
[0].check_value
= check_value
;
513 fields
[0].check_mask
= check_mask
;
515 jtag_add_dr_scan_check(3, fields
, jtag_get_end_state());
517 free(fields
[1].out_value
);
518 free(fields
[2].out_value
);
523 static int etm_set_reg(reg_t
*reg
, uint32_t value
)
527 if ((retval
= etm_write_reg(reg
, value
)) != ERROR_OK
)
529 LOG_ERROR("BUG: error scheduling etm register write");
533 buf_set_u32(reg
->value
, 0, reg
->size
, value
);
540 static int etm_set_reg_w_exec(reg_t
*reg
, uint8_t *buf
)
544 etm_set_reg(reg
, buf_get_u32(buf
, 0, reg
->size
));
546 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
548 LOG_ERROR("register write failed");
554 static int etm_write_reg(reg_t
*reg
, uint32_t value
)
556 etm_reg_t
*etm_reg
= reg
->arch_info
;
557 const struct etm_reg_info
*r
= etm_reg
->reg_info
;
558 uint8_t reg_addr
= r
->addr
& 0x7f;
559 scan_field_t fields
[3];
561 if (etm_reg
->reg_info
->mode
== RO
) {
562 LOG_ERROR("BUG: can't write read--only register %s", r
->name
);
563 return ERROR_INVALID_ARGUMENTS
;
566 LOG_DEBUG("%s (%u): 0x%8.8" PRIx32
"", r
->name
, reg_addr
, value
);
568 jtag_set_end_state(TAP_IDLE
);
569 arm_jtag_scann(etm_reg
->jtag_info
, 0x6);
570 arm_jtag_set_instr(etm_reg
->jtag_info
, etm_reg
->jtag_info
->intest_instr
, NULL
);
572 fields
[0].tap
= etm_reg
->jtag_info
->tap
;
573 fields
[0].num_bits
= 32;
575 fields
[0].out_value
= tmp1
;
576 buf_set_u32(fields
[0].out_value
, 0, 32, value
);
577 fields
[0].in_value
= NULL
;
579 fields
[1].tap
= etm_reg
->jtag_info
->tap
;
580 fields
[1].num_bits
= 7;
582 fields
[1].out_value
= &tmp2
;
583 buf_set_u32(fields
[1].out_value
, 0, 7, reg_addr
);
584 fields
[1].in_value
= NULL
;
586 fields
[2].tap
= etm_reg
->jtag_info
->tap
;
587 fields
[2].num_bits
= 1;
589 fields
[2].out_value
= &tmp3
;
590 buf_set_u32(fields
[2].out_value
, 0, 1, 1);
591 fields
[2].in_value
= NULL
;
593 jtag_add_dr_scan(3, fields
, jtag_get_end_state());
599 /* ETM trace analysis functionality
602 extern etm_capture_driver_t etm_dummy_capture_driver
;
603 #if BUILD_OOCD_TRACE == 1
604 extern etm_capture_driver_t oocd_trace_capture_driver
;
607 static etm_capture_driver_t
*etm_capture_drivers
[] =
610 &etm_dummy_capture_driver
,
611 #if BUILD_OOCD_TRACE == 1
612 &oocd_trace_capture_driver
,
617 static int etm_read_instruction(etm_context_t
*ctx
, arm_instruction_t
*instruction
)
626 return ERROR_TRACE_IMAGE_UNAVAILABLE
;
628 /* search for the section the current instruction belongs to */
629 for (i
= 0; i
< ctx
->image
->num_sections
; i
++)
631 if ((ctx
->image
->sections
[i
].base_address
<= ctx
->current_pc
) &&
632 (ctx
->image
->sections
[i
].base_address
+ ctx
->image
->sections
[i
].size
> ctx
->current_pc
))
641 /* current instruction couldn't be found in the image */
642 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE
;
645 if (ctx
->core_state
== ARMV4_5_STATE_ARM
)
648 if ((retval
= image_read_section(ctx
->image
, section
,
649 ctx
->current_pc
- ctx
->image
->sections
[section
].base_address
,
650 4, buf
, &size_read
)) != ERROR_OK
)
652 LOG_ERROR("error while reading instruction: %i", retval
);
653 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE
;
655 opcode
= target_buffer_get_u32(ctx
->target
, buf
);
656 arm_evaluate_opcode(opcode
, ctx
->current_pc
, instruction
);
658 else if (ctx
->core_state
== ARMV4_5_STATE_THUMB
)
661 if ((retval
= image_read_section(ctx
->image
, section
,
662 ctx
->current_pc
- ctx
->image
->sections
[section
].base_address
,
663 2, buf
, &size_read
)) != ERROR_OK
)
665 LOG_ERROR("error while reading instruction: %i", retval
);
666 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE
;
668 opcode
= target_buffer_get_u16(ctx
->target
, buf
);
669 thumb_evaluate_opcode(opcode
, ctx
->current_pc
, instruction
);
671 else if (ctx
->core_state
== ARMV4_5_STATE_JAZELLE
)
673 LOG_ERROR("BUG: tracing of jazelle code not supported");
678 LOG_ERROR("BUG: unknown core state encountered");
685 static int etmv1_next_packet(etm_context_t
*ctx
, uint8_t *packet
, int apo
)
687 while (ctx
->data_index
< ctx
->trace_depth
)
689 /* if the caller specified an address packet offset, skip until the
690 * we reach the n-th cycle marked with tracesync */
693 if (ctx
->trace_data
[ctx
->data_index
].flags
& ETMV1_TRACESYNC_CYCLE
)
704 /* no tracedata output during a TD cycle
705 * or in a trigger cycle */
706 if ((ctx
->trace_data
[ctx
->data_index
].pipestat
== STAT_TD
)
707 || (ctx
->trace_data
[ctx
->data_index
].flags
& ETMV1_TRIGGER_CYCLE
))
714 if ((ctx
->portmode
& ETM_PORT_WIDTH_MASK
) == ETM_PORT_16BIT
)
716 if (ctx
->data_half
== 0)
718 *packet
= ctx
->trace_data
[ctx
->data_index
].packet
& 0xff;
723 *packet
= (ctx
->trace_data
[ctx
->data_index
].packet
& 0xff00) >> 8;
728 else if ((ctx
->portmode
& ETM_PORT_WIDTH_MASK
) == ETM_PORT_8BIT
)
730 *packet
= ctx
->trace_data
[ctx
->data_index
].packet
& 0xff;
735 /* on a 4-bit port, a packet will be output during two consecutive cycles */
736 if (ctx
->data_index
> (ctx
->trace_depth
- 2))
739 *packet
= ctx
->trace_data
[ctx
->data_index
].packet
& 0xf;
740 *packet
|= (ctx
->trace_data
[ctx
->data_index
+ 1].packet
& 0xf) << 4;
741 ctx
->data_index
+= 2;
750 static int etmv1_branch_address(etm_context_t
*ctx
)
758 /* quit analysis if less than two cycles are left in the trace
759 * because we can't extract the APO */
760 if (ctx
->data_index
> (ctx
->trace_depth
- 2))
763 /* a BE could be output during an APO cycle, skip the current
764 * and continue with the new one */
765 if (ctx
->trace_data
[ctx
->pipe_index
+ 1].pipestat
& 0x4)
767 if (ctx
->trace_data
[ctx
->pipe_index
+ 2].pipestat
& 0x4)
770 /* address packet offset encoded in the next two cycles' pipestat bits */
771 apo
= ctx
->trace_data
[ctx
->pipe_index
+ 1].pipestat
& 0x3;
772 apo
|= (ctx
->trace_data
[ctx
->pipe_index
+ 2].pipestat
& 0x3) << 2;
774 /* count number of tracesync cycles between current pipe_index and data_index
775 * i.e. the number of tracesyncs that data_index already passed by
776 * to subtract them from the APO */
777 for (i
= ctx
->pipe_index
; i
< ctx
->data_index
; i
++)
779 if (ctx
->trace_data
[ctx
->pipe_index
+ 1].pipestat
& ETMV1_TRACESYNC_CYCLE
)
783 /* extract up to four 7-bit packets */
785 if ((retval
= etmv1_next_packet(ctx
, &packet
, (shift
== 0) ? apo
+ 1 : 0)) != 0)
787 ctx
->last_branch
&= ~(0x7f << shift
);
788 ctx
->last_branch
|= (packet
& 0x7f) << shift
;
790 } while ((packet
& 0x80) && (shift
< 28));
792 /* one last packet holding 4 bits of the address, plus the branch reason code */
793 if ((shift
== 28) && (packet
& 0x80))
795 if ((retval
= etmv1_next_packet(ctx
, &packet
, 0)) != 0)
797 ctx
->last_branch
&= 0x0fffffff;
798 ctx
->last_branch
|= (packet
& 0x0f) << 28;
799 ctx
->last_branch_reason
= (packet
& 0x70) >> 4;
804 ctx
->last_branch_reason
= 0;
812 /* if a full address was output, we might have branched into Jazelle state */
813 if ((shift
== 32) && (packet
& 0x80))
815 ctx
->core_state
= ARMV4_5_STATE_JAZELLE
;
819 /* if we didn't branch into Jazelle state, the current processor state is
820 * encoded in bit 0 of the branch target address */
821 if (ctx
->last_branch
& 0x1)
823 ctx
->core_state
= ARMV4_5_STATE_THUMB
;
824 ctx
->last_branch
&= ~0x1;
828 ctx
->core_state
= ARMV4_5_STATE_ARM
;
829 ctx
->last_branch
&= ~0x3;
836 static int etmv1_data(etm_context_t
*ctx
, int size
, uint32_t *data
)
842 for (j
= 0; j
< size
; j
++)
844 if ((retval
= etmv1_next_packet(ctx
, &buf
[j
], 0)) != 0)
850 LOG_ERROR("TODO: add support for 64-bit values");
854 *data
= target_buffer_get_u32(ctx
->target
, buf
);
856 *data
= target_buffer_get_u16(ctx
->target
, buf
);
865 static int etmv1_analyze_trace(etm_context_t
*ctx
, struct command_context_s
*cmd_ctx
)
868 arm_instruction_t instruction
;
870 /* read the trace data if it wasn't read already */
871 if (ctx
->trace_depth
== 0)
872 ctx
->capture_driver
->read_trace(ctx
);
874 /* start at the beginning of the captured trace */
879 /* neither the PC nor the data pointer are valid */
883 while (ctx
->pipe_index
< ctx
->trace_depth
)
885 uint8_t pipestat
= ctx
->trace_data
[ctx
->pipe_index
].pipestat
;
886 uint32_t next_pc
= ctx
->current_pc
;
887 uint32_t old_data_index
= ctx
->data_index
;
888 uint32_t old_data_half
= ctx
->data_half
;
889 uint32_t old_index
= ctx
->pipe_index
;
890 uint32_t last_instruction
= ctx
->last_instruction
;
892 int current_pc_ok
= ctx
->pc_ok
;
894 if (ctx
->trace_data
[ctx
->pipe_index
].flags
& ETMV1_TRIGGER_CYCLE
)
896 command_print(cmd_ctx
, "--- trigger ---");
899 /* instructions execute in IE/D or BE/D cycles */
900 if ((pipestat
== STAT_IE
) || (pipestat
== STAT_ID
))
901 ctx
->last_instruction
= ctx
->pipe_index
;
903 /* if we don't have a valid pc skip until we reach an indirect branch */
904 if ((!ctx
->pc_ok
) && (pipestat
!= STAT_BE
))
910 /* any indirect branch could have interrupted instruction flow
911 * - the branch reason code could indicate a trace discontinuity
912 * - a branch to the exception vectors indicates an exception
914 if ((pipestat
== STAT_BE
) || (pipestat
== STAT_BD
))
916 /* backup current data index, to be able to consume the branch address
917 * before examining data address and values
919 old_data_index
= ctx
->data_index
;
920 old_data_half
= ctx
->data_half
;
922 ctx
->last_instruction
= ctx
->pipe_index
;
924 if ((retval
= etmv1_branch_address(ctx
)) != 0)
926 /* negative return value from etmv1_branch_address means we ran out of packets,
927 * quit analysing the trace */
931 /* a positive return values means the current branch was abandoned,
932 * and a new branch was encountered in cycle ctx->pipe_index + retval;
934 LOG_WARNING("abandoned branch encountered, correctnes of analysis uncertain");
935 ctx
->pipe_index
+= retval
;
939 /* skip over APO cycles */
940 ctx
->pipe_index
+= 2;
942 switch (ctx
->last_branch_reason
)
944 case 0x0: /* normal PC change */
945 next_pc
= ctx
->last_branch
;
947 case 0x1: /* tracing enabled */
948 command_print(cmd_ctx
, "--- tracing enabled at 0x%8.8" PRIx32
" ---", ctx
->last_branch
);
949 ctx
->current_pc
= ctx
->last_branch
;
953 case 0x2: /* trace restarted after FIFO overflow */
954 command_print(cmd_ctx
, "--- trace restarted after FIFO overflow at 0x%8.8" PRIx32
" ---", ctx
->last_branch
);
955 ctx
->current_pc
= ctx
->last_branch
;
959 case 0x3: /* exit from debug state */
960 command_print(cmd_ctx
, "--- exit from debug state at 0x%8.8" PRIx32
" ---", ctx
->last_branch
);
961 ctx
->current_pc
= ctx
->last_branch
;
965 case 0x4: /* periodic synchronization point */
966 next_pc
= ctx
->last_branch
;
967 /* if we had no valid PC prior to this synchronization point,
968 * we have to move on with the next trace cycle
972 command_print(cmd_ctx
, "--- periodic synchronization point at 0x%8.8" PRIx32
" ---", next_pc
);
973 ctx
->current_pc
= next_pc
;
978 default: /* reserved */
979 LOG_ERROR("BUG: branch reason code 0x%" PRIx32
" is reserved", ctx
->last_branch_reason
);
984 /* if we got here the branch was a normal PC change
985 * (or a periodic synchronization point, which means the same for that matter)
986 * if we didn't accquire a complete PC continue with the next cycle
991 /* indirect branch to the exception vector means an exception occured */
992 if ((ctx
->last_branch
<= 0x20)
993 || ((ctx
->last_branch
>= 0xffff0000) && (ctx
->last_branch
<= 0xffff0020)))
995 if ((ctx
->last_branch
& 0xff) == 0x10)
997 command_print(cmd_ctx
, "data abort");
1001 command_print(cmd_ctx
, "exception vector 0x%2.2" PRIx32
"", ctx
->last_branch
);
1002 ctx
->current_pc
= ctx
->last_branch
;
1009 /* an instruction was executed (or not, depending on the condition flags)
1010 * retrieve it from the image for displaying */
1011 if (ctx
->pc_ok
&& (pipestat
!= STAT_WT
) && (pipestat
!= STAT_TD
) &&
1012 !(((pipestat
== STAT_BE
) || (pipestat
== STAT_BD
)) &&
1013 ((ctx
->last_branch_reason
!= 0x0) && (ctx
->last_branch_reason
!= 0x4))))
1015 if ((retval
= etm_read_instruction(ctx
, &instruction
)) != ERROR_OK
)
1017 /* can't continue tracing with no image available */
1018 if (retval
== ERROR_TRACE_IMAGE_UNAVAILABLE
)
1022 else if (retval
== ERROR_TRACE_INSTRUCTION_UNAVAILABLE
)
1024 /* TODO: handle incomplete images
1025 * for now we just quit the analsysis*/
1030 cycles
= old_index
- last_instruction
;
1033 if ((pipestat
== STAT_ID
) || (pipestat
== STAT_BD
))
1035 uint32_t new_data_index
= ctx
->data_index
;
1036 uint32_t new_data_half
= ctx
->data_half
;
1038 /* in case of a branch with data, the branch target address was consumed before
1039 * we temporarily go back to the saved data index */
1040 if (pipestat
== STAT_BD
)
1042 ctx
->data_index
= old_data_index
;
1043 ctx
->data_half
= old_data_half
;
1046 if (ctx
->tracemode
& ETMV1_TRACE_ADDR
)
1052 if ((retval
= etmv1_next_packet(ctx
, &packet
, 0)) != 0)
1053 return ERROR_ETM_ANALYSIS_FAILED
;
1054 ctx
->last_ptr
&= ~(0x7f << shift
);
1055 ctx
->last_ptr
|= (packet
& 0x7f) << shift
;
1057 } while ((packet
& 0x80) && (shift
< 32));
1064 command_print(cmd_ctx
, "address: 0x%8.8" PRIx32
"", ctx
->last_ptr
);
1068 if (ctx
->tracemode
& ETMV1_TRACE_DATA
)
1070 if ((instruction
.type
== ARM_LDM
) || (instruction
.type
== ARM_STM
))
1073 for (i
= 0; i
< 16; i
++)
1075 if (instruction
.info
.load_store_multiple
.register_list
& (1 << i
))
1078 if (etmv1_data(ctx
, 4, &data
) != 0)
1079 return ERROR_ETM_ANALYSIS_FAILED
;
1080 command_print(cmd_ctx
, "data: 0x%8.8" PRIx32
"", data
);
1084 else if ((instruction
.type
>= ARM_LDR
) && (instruction
.type
<= ARM_STRH
))
1087 if (etmv1_data(ctx
, arm_access_size(&instruction
), &data
) != 0)
1088 return ERROR_ETM_ANALYSIS_FAILED
;
1089 command_print(cmd_ctx
, "data: 0x%8.8" PRIx32
"", data
);
1093 /* restore data index after consuming BD address and data */
1094 if (pipestat
== STAT_BD
)
1096 ctx
->data_index
= new_data_index
;
1097 ctx
->data_half
= new_data_half
;
1102 if ((pipestat
== STAT_IE
) || (pipestat
== STAT_ID
))
1104 if (((instruction
.type
== ARM_B
) ||
1105 (instruction
.type
== ARM_BL
) ||
1106 (instruction
.type
== ARM_BLX
)) &&
1107 (instruction
.info
.b_bl_bx_blx
.target_address
!= 0xffffffff))
1109 next_pc
= instruction
.info
.b_bl_bx_blx
.target_address
;
1113 next_pc
+= (ctx
->core_state
== ARMV4_5_STATE_ARM
) ? 4 : 2;
1116 else if (pipestat
== STAT_IN
)
1118 next_pc
+= (ctx
->core_state
== ARMV4_5_STATE_ARM
) ? 4 : 2;
1121 if ((pipestat
!= STAT_TD
) && (pipestat
!= STAT_WT
))
1123 char cycles_text
[32] = "";
1125 /* if the trace was captured with cycle accurate tracing enabled,
1126 * output the number of cycles since the last executed instruction
1128 if (ctx
->tracemode
& ETMV1_CYCLE_ACCURATE
)
1130 snprintf(cycles_text
, 32, " (%i %s)",
1132 (cycles
== 1) ? "cycle" : "cycles");
1135 command_print(cmd_ctx
, "%s%s%s",
1137 (pipestat
== STAT_IN
) ? " (not executed)" : "",
1140 ctx
->current_pc
= next_pc
;
1142 /* packets for an instruction don't start on or before the preceding
1143 * functional pipestat (i.e. other than WT or TD)
1145 if (ctx
->data_index
<= ctx
->pipe_index
)
1147 ctx
->data_index
= ctx
->pipe_index
+ 1;
1152 ctx
->pipe_index
+= 1;
1158 static int handle_etm_tracemode_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
1161 armv4_5_common_t
*armv4_5
;
1162 arm7_9_common_t
*arm7_9
;
1163 etmv1_tracemode_t tracemode
;
1165 target
= get_current_target(cmd_ctx
);
1167 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1169 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
1173 if (!arm7_9
->etm_ctx
)
1175 command_print(cmd_ctx
, "current target doesn't have an ETM configured");
1179 tracemode
= arm7_9
->etm_ctx
->tracemode
;
1183 /* what parts of data access are traced? */
1184 if (strcmp(args
[0], "none") == 0)
1186 tracemode
= ETMV1_TRACE_NONE
;
1188 else if (strcmp(args
[0], "data") == 0)
1190 tracemode
= ETMV1_TRACE_DATA
;
1192 else if (strcmp(args
[0], "address") == 0)
1194 tracemode
= ETMV1_TRACE_ADDR
;
1196 else if (strcmp(args
[0], "all") == 0)
1198 tracemode
= ETMV1_TRACE_DATA
| ETMV1_TRACE_ADDR
;
1202 command_print(cmd_ctx
, "invalid option '%s'", args
[0]);
1206 switch (strtol(args
[1], NULL
, 0))
1209 tracemode
|= ETMV1_CONTEXTID_NONE
;
1212 tracemode
|= ETMV1_CONTEXTID_8
;
1215 tracemode
|= ETMV1_CONTEXTID_16
;
1218 tracemode
|= ETMV1_CONTEXTID_32
;
1221 command_print(cmd_ctx
, "invalid option '%s'", args
[1]);
1225 if (strcmp(args
[2], "enable") == 0)
1227 tracemode
|= ETMV1_CYCLE_ACCURATE
;
1229 else if (strcmp(args
[2], "disable") == 0)
1235 command_print(cmd_ctx
, "invalid option '%s'", args
[2]);
1239 if (strcmp(args
[3], "enable") == 0)
1241 tracemode
|= ETMV1_BRANCH_OUTPUT
;
1243 else if (strcmp(args
[3], "disable") == 0)
1249 command_print(cmd_ctx
, "invalid option '%s'", args
[2]);
1254 * - CPRT tracing (coprocessor register transfers)
1255 * - debug request (causes debug entry on trigger)
1256 * - stall on FIFOFULL (preventing tracedata lossage)
1261 command_print(cmd_ctx
, "usage: configure trace mode <none | data | address | all> <context id bits> <cycle accurate> <branch output>");
1265 command_print(cmd_ctx
, "current tracemode configuration:");
1267 switch (tracemode
& ETMV1_TRACE_MASK
)
1269 case ETMV1_TRACE_NONE
:
1270 command_print(cmd_ctx
, "data tracing: none");
1272 case ETMV1_TRACE_DATA
:
1273 command_print(cmd_ctx
, "data tracing: data only");
1275 case ETMV1_TRACE_ADDR
:
1276 command_print(cmd_ctx
, "data tracing: address only");
1278 case ETMV1_TRACE_DATA
| ETMV1_TRACE_ADDR
:
1279 command_print(cmd_ctx
, "data tracing: address and data");
1283 switch (tracemode
& ETMV1_CONTEXTID_MASK
)
1285 case ETMV1_CONTEXTID_NONE
:
1286 command_print(cmd_ctx
, "contextid tracing: none");
1288 case ETMV1_CONTEXTID_8
:
1289 command_print(cmd_ctx
, "contextid tracing: 8 bit");
1291 case ETMV1_CONTEXTID_16
:
1292 command_print(cmd_ctx
, "contextid tracing: 16 bit");
1294 case ETMV1_CONTEXTID_32
:
1295 command_print(cmd_ctx
, "contextid tracing: 32 bit");
1299 if (tracemode
& ETMV1_CYCLE_ACCURATE
)
1301 command_print(cmd_ctx
, "cycle-accurate tracing enabled");
1305 command_print(cmd_ctx
, "cycle-accurate tracing disabled");
1308 if (tracemode
& ETMV1_BRANCH_OUTPUT
)
1310 command_print(cmd_ctx
, "full branch address output enabled");
1314 command_print(cmd_ctx
, "full branch address output disabled");
1317 /* only update ETM_CTRL register if tracemode changed */
1318 if (arm7_9
->etm_ctx
->tracemode
!= tracemode
)
1320 reg_t
*etm_ctrl_reg
;
1322 etm_ctrl_reg
= etm_reg_lookup(arm7_9
->etm_ctx
, ETM_CTRL
);
1326 etm_get_reg(etm_ctrl_reg
);
1328 buf_set_u32(etm_ctrl_reg
->value
, 2, 2, tracemode
& ETMV1_TRACE_MASK
);
1329 buf_set_u32(etm_ctrl_reg
->value
, 14, 2, (tracemode
& ETMV1_CONTEXTID_MASK
) >> 4);
1330 buf_set_u32(etm_ctrl_reg
->value
, 12, 1, (tracemode
& ETMV1_CYCLE_ACCURATE
) >> 8);
1331 buf_set_u32(etm_ctrl_reg
->value
, 8, 1, (tracemode
& ETMV1_BRANCH_OUTPUT
) >> 9);
1332 etm_store_reg(etm_ctrl_reg
);
1334 arm7_9
->etm_ctx
->tracemode
= tracemode
;
1336 /* invalidate old trace data */
1337 arm7_9
->etm_ctx
->capture_status
= TRACE_IDLE
;
1338 if (arm7_9
->etm_ctx
->trace_depth
> 0)
1340 free(arm7_9
->etm_ctx
->trace_data
);
1341 arm7_9
->etm_ctx
->trace_data
= NULL
;
1343 arm7_9
->etm_ctx
->trace_depth
= 0;
1349 static int handle_etm_config_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
1352 armv4_5_common_t
*armv4_5
;
1353 arm7_9_common_t
*arm7_9
;
1354 etm_portmode_t portmode
= 0x0;
1355 etm_context_t
*etm_ctx
= malloc(sizeof(etm_context_t
));
1361 return ERROR_COMMAND_SYNTAX_ERROR
;
1364 target
= get_target(args
[0]);
1367 LOG_ERROR("target '%s' not defined", args
[0]);
1372 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1374 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
1379 switch (strtoul(args
[1], NULL
, 0))
1382 portmode
|= ETM_PORT_4BIT
;
1385 portmode
|= ETM_PORT_8BIT
;
1388 portmode
|= ETM_PORT_16BIT
;
1391 command_print(cmd_ctx
, "unsupported ETM port width '%s', must be 4, 8 or 16", args
[1]);
1396 if (strcmp("normal", args
[2]) == 0)
1398 portmode
|= ETM_PORT_NORMAL
;
1400 else if (strcmp("multiplexed", args
[2]) == 0)
1402 portmode
|= ETM_PORT_MUXED
;
1404 else if (strcmp("demultiplexed", args
[2]) == 0)
1406 portmode
|= ETM_PORT_DEMUXED
;
1410 command_print(cmd_ctx
, "unsupported ETM port mode '%s', must be 'normal', 'multiplexed' or 'demultiplexed'", args
[2]);
1415 if (strcmp("half", args
[3]) == 0)
1417 portmode
|= ETM_PORT_HALF_CLOCK
;
1419 else if (strcmp("full", args
[3]) == 0)
1421 portmode
|= ETM_PORT_FULL_CLOCK
;
1425 command_print(cmd_ctx
, "unsupported ETM port clocking '%s', must be 'full' or 'half'", args
[3]);
1430 for (i
= 0; etm_capture_drivers
[i
]; i
++)
1432 if (strcmp(args
[4], etm_capture_drivers
[i
]->name
) == 0)
1435 if ((retval
= etm_capture_drivers
[i
]->register_commands(cmd_ctx
)) != ERROR_OK
)
1441 etm_ctx
->capture_driver
= etm_capture_drivers
[i
];
1447 if (!etm_capture_drivers
[i
])
1449 /* no supported capture driver found, don't register an ETM */
1451 LOG_ERROR("trace capture driver '%s' not found", args
[4]);
1455 etm_ctx
->target
= target
;
1456 etm_ctx
->trigger_percent
= 50;
1457 etm_ctx
->trace_data
= NULL
;
1458 etm_ctx
->trace_depth
= 0;
1459 etm_ctx
->portmode
= portmode
;
1460 etm_ctx
->tracemode
= 0x0;
1461 etm_ctx
->core_state
= ARMV4_5_STATE_ARM
;
1462 etm_ctx
->image
= NULL
;
1463 etm_ctx
->pipe_index
= 0;
1464 etm_ctx
->data_index
= 0;
1465 etm_ctx
->current_pc
= 0x0;
1467 etm_ctx
->last_branch
= 0x0;
1468 etm_ctx
->last_branch_reason
= 0x0;
1469 etm_ctx
->last_ptr
= 0x0;
1470 etm_ctx
->ptr_ok
= 0x0;
1471 etm_ctx
->last_instruction
= 0;
1473 arm7_9
->etm_ctx
= etm_ctx
;
1475 return etm_register_user_commands(cmd_ctx
);
1478 static int handle_etm_info_command(struct command_context_s
*cmd_ctx
,
1479 char *cmd
, char **args
, int argc
)
1482 armv4_5_common_t
*armv4_5
;
1483 arm7_9_common_t
*arm7_9
;
1485 reg_t
*etm_sys_config_reg
;
1489 target
= get_current_target(cmd_ctx
);
1491 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1493 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
1497 etm
= arm7_9
->etm_ctx
;
1500 command_print(cmd_ctx
, "current target doesn't have an ETM configured");
1504 command_print(cmd_ctx
, "ETM v%d.%d",
1505 etm
->bcd_vers
>> 4, etm
->bcd_vers
& 0xf);
1506 command_print(cmd_ctx
, "pairs of address comparators: %i",
1507 (int) (etm
->config
>> 0) & 0x0f);
1508 command_print(cmd_ctx
, "data comparators: %i",
1509 (int) (etm
->config
>> 4) & 0x0f);
1510 command_print(cmd_ctx
, "memory map decoders: %i",
1511 (int) (etm
->config
>> 8) & 0x1f);
1512 command_print(cmd_ctx
, "number of counters: %i",
1513 (int) (etm
->config
>> 13) & 0x07);
1514 command_print(cmd_ctx
, "sequencer %spresent",
1515 (int) (etm
->config
& (1 << 16)) ? "" : "not ");
1516 command_print(cmd_ctx
, "number of ext. inputs: %i",
1517 (int) (etm
->config
>> 17) & 0x07);
1518 command_print(cmd_ctx
, "number of ext. outputs: %i",
1519 (int) (etm
->config
>> 20) & 0x07);
1520 command_print(cmd_ctx
, "FIFO full %spresent",
1521 (int) (etm
->config
& (1 << 23)) ? "" : "not ");
1522 if (etm
->bcd_vers
< 0x20)
1523 command_print(cmd_ctx
, "protocol version: %i",
1524 (int) (etm
->config
>> 28) & 0x07);
1526 command_print(cmd_ctx
, "trace start/stop %spresent",
1527 (etm
->config
& (1 << 26)) ? "" : "not ");
1528 command_print(cmd_ctx
, "number of context comparators: %i",
1529 (int) (etm
->config
>> 24) & 0x03);
1532 /* SYS_CONFIG isn't present before ETMv1.2 */
1533 etm_sys_config_reg
= etm_reg_lookup(etm
, ETM_SYS_CONFIG
);
1534 if (!etm_sys_config_reg
)
1537 etm_get_reg(etm_sys_config_reg
);
1539 switch (buf_get_u32(etm_sys_config_reg
->value
, 0, 3))
1551 LOG_ERROR("Illegal max_port_size");
1554 command_print(cmd_ctx
, "max. port size: %i", max_port_size
);
1556 command_print(cmd_ctx
, "half-rate clocking %ssupported",
1557 (buf_get_u32(etm_sys_config_reg
->value
, 3, 1) == 1) ? "" : "not ");
1558 command_print(cmd_ctx
, "full-rate clocking %ssupported",
1559 (buf_get_u32(etm_sys_config_reg
->value
, 4, 1) == 1) ? "" : "not ");
1560 command_print(cmd_ctx
, "normal trace format %ssupported",
1561 (buf_get_u32(etm_sys_config_reg
->value
, 5, 1) == 1) ? "" : "not ");
1562 command_print(cmd_ctx
, "multiplex trace format %ssupported",
1563 (buf_get_u32(etm_sys_config_reg
->value
, 6, 1) == 1) ? "" : "not ");
1564 command_print(cmd_ctx
, "demultiplex trace format %ssupported",
1565 (buf_get_u32(etm_sys_config_reg
->value
, 7, 1) == 1) ? "" : "not ");
1566 command_print(cmd_ctx
, "FIFO full %ssupported",
1567 (buf_get_u32(etm_sys_config_reg
->value
, 8, 1) == 1) ? "" : "not ");
1572 static int handle_etm_status_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
1575 armv4_5_common_t
*armv4_5
;
1576 arm7_9_common_t
*arm7_9
;
1578 trace_status_t trace_status
;
1580 target
= get_current_target(cmd_ctx
);
1582 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1584 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
1588 if (!arm7_9
->etm_ctx
)
1590 command_print(cmd_ctx
, "current target doesn't have an ETM configured");
1593 etm
= arm7_9
->etm_ctx
;
1596 if (etm
->bcd_vers
>= 0x11) {
1599 reg
= etm_reg_lookup(etm
, ETM_STATUS
);
1602 if (etm_get_reg(reg
) == ERROR_OK
) {
1603 unsigned s
= buf_get_u32(reg
->value
, 0, reg
->size
);
1605 command_print(cmd_ctx
, "etm: %s%s%s%s",
1606 /* bit(1) == progbit */
1607 (etm
->bcd_vers
>= 0x12)
1609 ? "disabled" : "enabled")
1611 ((s
& (1 << 3)) && etm
->bcd_vers
>= 0x31)
1612 ? " triggered" : "",
1613 ((s
& (1 << 2)) && etm
->bcd_vers
>= 0x12)
1614 ? " start/stop" : "",
1615 ((s
& (1 << 0)) && etm
->bcd_vers
>= 0x11)
1616 ? " untraced-overflow" : "");
1617 } /* else ignore and try showing trace port status */
1620 /* Trace Port Driver status */
1621 trace_status
= etm
->capture_driver
->status(etm
);
1622 if (trace_status
== TRACE_IDLE
)
1624 command_print(cmd_ctx
, "%s: idle", etm
->capture_driver
->name
);
1628 static char *completed
= " completed";
1629 static char *running
= " is running";
1630 static char *overflowed
= ", overflowed";
1631 static char *triggered
= ", triggered";
1633 command_print(cmd_ctx
, "%s: trace collection%s%s%s",
1634 etm
->capture_driver
->name
,
1635 (trace_status
& TRACE_RUNNING
) ? running
: completed
,
1636 (trace_status
& TRACE_OVERFLOWED
) ? overflowed
: "",
1637 (trace_status
& TRACE_TRIGGERED
) ? triggered
: "");
1639 if (etm
->trace_depth
> 0)
1641 command_print(cmd_ctx
, "%i frames of trace data read",
1642 (int)(etm
->trace_depth
));
1649 static int handle_etm_image_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
1652 armv4_5_common_t
*armv4_5
;
1653 arm7_9_common_t
*arm7_9
;
1654 etm_context_t
*etm_ctx
;
1658 command_print(cmd_ctx
, "usage: etm image <file> [base address] [type]");
1662 target
= get_current_target(cmd_ctx
);
1664 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1666 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
1670 if (!(etm_ctx
= arm7_9
->etm_ctx
))
1672 command_print(cmd_ctx
, "current target doesn't have an ETM configured");
1678 image_close(etm_ctx
->image
);
1679 free(etm_ctx
->image
);
1680 command_print(cmd_ctx
, "previously loaded image found and closed");
1683 etm_ctx
->image
= malloc(sizeof(image_t
));
1684 etm_ctx
->image
->base_address_set
= 0;
1685 etm_ctx
->image
->start_address_set
= 0;
1687 /* a base address isn't always necessary, default to 0x0 (i.e. don't relocate) */
1690 etm_ctx
->image
->base_address_set
= 1;
1691 etm_ctx
->image
->base_address
= strtoul(args
[1], NULL
, 0);
1695 etm_ctx
->image
->base_address_set
= 0;
1698 if (image_open(etm_ctx
->image
, args
[0], (argc
>= 3) ? args
[2] : NULL
) != ERROR_OK
)
1700 free(etm_ctx
->image
);
1701 etm_ctx
->image
= NULL
;
1708 static int handle_etm_dump_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
1712 armv4_5_common_t
*armv4_5
;
1713 arm7_9_common_t
*arm7_9
;
1714 etm_context_t
*etm_ctx
;
1719 command_print(cmd_ctx
, "usage: etm dump <file>");
1723 target
= get_current_target(cmd_ctx
);
1725 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1727 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
1731 if (!(etm_ctx
= arm7_9
->etm_ctx
))
1733 command_print(cmd_ctx
, "current target doesn't have an ETM configured");
1737 if (etm_ctx
->capture_driver
->status
== TRACE_IDLE
)
1739 command_print(cmd_ctx
, "trace capture wasn't enabled, no trace data captured");
1743 if (etm_ctx
->capture_driver
->status(etm_ctx
) & TRACE_RUNNING
)
1745 /* TODO: if on-the-fly capture is to be supported, this needs to be changed */
1746 command_print(cmd_ctx
, "trace capture not completed");
1750 /* read the trace data if it wasn't read already */
1751 if (etm_ctx
->trace_depth
== 0)
1752 etm_ctx
->capture_driver
->read_trace(etm_ctx
);
1754 if (fileio_open(&file
, args
[0], FILEIO_WRITE
, FILEIO_BINARY
) != ERROR_OK
)
1759 fileio_write_u32(&file
, etm_ctx
->capture_status
);
1760 fileio_write_u32(&file
, etm_ctx
->portmode
);
1761 fileio_write_u32(&file
, etm_ctx
->tracemode
);
1762 fileio_write_u32(&file
, etm_ctx
->trace_depth
);
1764 for (i
= 0; i
< etm_ctx
->trace_depth
; i
++)
1766 fileio_write_u32(&file
, etm_ctx
->trace_data
[i
].pipestat
);
1767 fileio_write_u32(&file
, etm_ctx
->trace_data
[i
].packet
);
1768 fileio_write_u32(&file
, etm_ctx
->trace_data
[i
].flags
);
1771 fileio_close(&file
);
1776 static int handle_etm_load_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
1780 armv4_5_common_t
*armv4_5
;
1781 arm7_9_common_t
*arm7_9
;
1782 etm_context_t
*etm_ctx
;
1787 command_print(cmd_ctx
, "usage: etm load <file>");
1791 target
= get_current_target(cmd_ctx
);
1793 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1795 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
1799 if (!(etm_ctx
= arm7_9
->etm_ctx
))
1801 command_print(cmd_ctx
, "current target doesn't have an ETM configured");
1805 if (etm_ctx
->capture_driver
->status(etm_ctx
) & TRACE_RUNNING
)
1807 command_print(cmd_ctx
, "trace capture running, stop first");
1811 if (fileio_open(&file
, args
[0], FILEIO_READ
, FILEIO_BINARY
) != ERROR_OK
)
1818 command_print(cmd_ctx
, "size isn't a multiple of 4, no valid trace data");
1819 fileio_close(&file
);
1823 if (etm_ctx
->trace_depth
> 0)
1825 free(etm_ctx
->trace_data
);
1826 etm_ctx
->trace_data
= NULL
;
1831 fileio_read_u32(&file
, &tmp
); etm_ctx
->capture_status
= tmp
;
1832 fileio_read_u32(&file
, &tmp
); etm_ctx
->portmode
= tmp
;
1833 fileio_read_u32(&file
, &tmp
); etm_ctx
->tracemode
= tmp
;
1834 fileio_read_u32(&file
, &etm_ctx
->trace_depth
);
1836 etm_ctx
->trace_data
= malloc(sizeof(etmv1_trace_data_t
) * etm_ctx
->trace_depth
);
1837 if (etm_ctx
->trace_data
== NULL
)
1839 command_print(cmd_ctx
, "not enough memory to perform operation");
1840 fileio_close(&file
);
1844 for (i
= 0; i
< etm_ctx
->trace_depth
; i
++)
1846 uint32_t pipestat
, packet
, flags
;
1847 fileio_read_u32(&file
, &pipestat
);
1848 fileio_read_u32(&file
, &packet
);
1849 fileio_read_u32(&file
, &flags
);
1850 etm_ctx
->trace_data
[i
].pipestat
= pipestat
& 0xff;
1851 etm_ctx
->trace_data
[i
].packet
= packet
& 0xffff;
1852 etm_ctx
->trace_data
[i
].flags
= flags
;
1855 fileio_close(&file
);
1860 static int handle_etm_trigger_percent_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
1863 armv4_5_common_t
*armv4_5
;
1864 arm7_9_common_t
*arm7_9
;
1865 etm_context_t
*etm_ctx
;
1867 target
= get_current_target(cmd_ctx
);
1869 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1871 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
1875 if (!(etm_ctx
= arm7_9
->etm_ctx
))
1877 command_print(cmd_ctx
, "current target doesn't have an ETM configured");
1883 uint32_t new_value
= strtoul(args
[0], NULL
, 0);
1885 if ((new_value
< 2) || (new_value
> 100))
1887 command_print(cmd_ctx
, "valid settings are 2%% to 100%%");
1891 etm_ctx
->trigger_percent
= new_value
;
1895 command_print(cmd_ctx
, "%i percent of the tracebuffer reserved for after the trigger", ((int)(etm_ctx
->trigger_percent
)));
1900 static int handle_etm_start_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
1903 armv4_5_common_t
*armv4_5
;
1904 arm7_9_common_t
*arm7_9
;
1905 etm_context_t
*etm_ctx
;
1906 reg_t
*etm_ctrl_reg
;
1908 target
= get_current_target(cmd_ctx
);
1910 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1912 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
1916 if (!(etm_ctx
= arm7_9
->etm_ctx
))
1918 command_print(cmd_ctx
, "current target doesn't have an ETM configured");
1922 /* invalidate old tracing data */
1923 arm7_9
->etm_ctx
->capture_status
= TRACE_IDLE
;
1924 if (arm7_9
->etm_ctx
->trace_depth
> 0)
1926 free(arm7_9
->etm_ctx
->trace_data
);
1927 arm7_9
->etm_ctx
->trace_data
= NULL
;
1929 arm7_9
->etm_ctx
->trace_depth
= 0;
1931 etm_ctrl_reg
= etm_reg_lookup(etm_ctx
, ETM_CTRL
);
1935 etm_get_reg(etm_ctrl_reg
);
1937 /* Clear programming bit (10), set port selection bit (11) */
1938 buf_set_u32(etm_ctrl_reg
->value
, 10, 2, 0x2);
1940 etm_store_reg(etm_ctrl_reg
);
1941 jtag_execute_queue();
1943 etm_ctx
->capture_driver
->start_capture(etm_ctx
);
1948 static int handle_etm_stop_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
1951 armv4_5_common_t
*armv4_5
;
1952 arm7_9_common_t
*arm7_9
;
1953 etm_context_t
*etm_ctx
;
1954 reg_t
*etm_ctrl_reg
;
1956 target
= get_current_target(cmd_ctx
);
1958 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1960 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
1964 if (!(etm_ctx
= arm7_9
->etm_ctx
))
1966 command_print(cmd_ctx
, "current target doesn't have an ETM configured");
1970 etm_ctrl_reg
= etm_reg_lookup(etm_ctx
, ETM_CTRL
);
1974 etm_get_reg(etm_ctrl_reg
);
1976 /* Set programming bit (10), clear port selection bit (11) */
1977 buf_set_u32(etm_ctrl_reg
->value
, 10, 2, 0x1);
1979 etm_store_reg(etm_ctrl_reg
);
1980 jtag_execute_queue();
1982 etm_ctx
->capture_driver
->stop_capture(etm_ctx
);
1987 static int handle_etm_analyze_command(struct command_context_s
*cmd_ctx
, char *cmd
, char **args
, int argc
)
1990 armv4_5_common_t
*armv4_5
;
1991 arm7_9_common_t
*arm7_9
;
1992 etm_context_t
*etm_ctx
;
1995 target
= get_current_target(cmd_ctx
);
1997 if (arm7_9_get_arch_pointers(target
, &armv4_5
, &arm7_9
) != ERROR_OK
)
1999 command_print(cmd_ctx
, "current target isn't an ARM7/ARM9 target");
2003 if (!(etm_ctx
= arm7_9
->etm_ctx
))
2005 command_print(cmd_ctx
, "current target doesn't have an ETM configured");
2009 if ((retval
= etmv1_analyze_trace(etm_ctx
, cmd_ctx
)) != ERROR_OK
)
2013 case ERROR_ETM_ANALYSIS_FAILED
:
2014 command_print(cmd_ctx
, "further analysis failed (corrupted trace data or just end of data");
2016 case ERROR_TRACE_INSTRUCTION_UNAVAILABLE
:
2017 command_print(cmd_ctx
, "no instruction for current address available, analysis aborted");
2019 case ERROR_TRACE_IMAGE_UNAVAILABLE
:
2020 command_print(cmd_ctx
, "no image available for trace analysis");
2023 command_print(cmd_ctx
, "unknown error: %i", retval
);
2030 int etm_register_commands(struct command_context_s
*cmd_ctx
)
2032 etm_cmd
= register_command(cmd_ctx
, NULL
, "etm", NULL
, COMMAND_ANY
, "Embedded Trace Macrocell");
2034 register_command(cmd_ctx
, etm_cmd
, "config", handle_etm_config_command
,
2035 COMMAND_CONFIG
, "etm config <target> <port_width> <port_mode> <clocking> <capture_driver>");
2040 static int etm_register_user_commands(struct command_context_s
*cmd_ctx
)
2042 register_command(cmd_ctx
, etm_cmd
, "tracemode", handle_etm_tracemode_command
,
2043 COMMAND_EXEC
, "configure/display trace mode: "
2044 "<none | data | address | all> "
2045 "<context_id_bits> <cycle_accurate> <branch_output>");
2047 register_command(cmd_ctx
, etm_cmd
, "info", handle_etm_info_command
,
2048 COMMAND_EXEC
, "display info about the current target's ETM");
2050 register_command(cmd_ctx
, etm_cmd
, "trigger_percent", handle_etm_trigger_percent_command
,
2051 COMMAND_EXEC
, "amount (<percent>) of trace buffer to be filled after the trigger occured");
2052 register_command(cmd_ctx
, etm_cmd
, "status", handle_etm_status_command
,
2053 COMMAND_EXEC
, "display current target's ETM status");
2054 register_command(cmd_ctx
, etm_cmd
, "start", handle_etm_start_command
,
2055 COMMAND_EXEC
, "start ETM trace collection");
2056 register_command(cmd_ctx
, etm_cmd
, "stop", handle_etm_stop_command
,
2057 COMMAND_EXEC
, "stop ETM trace collection");
2059 register_command(cmd_ctx
, etm_cmd
, "analyze", handle_etm_analyze_command
,
2060 COMMAND_EXEC
, "anaylze collected ETM trace");
2062 register_command(cmd_ctx
, etm_cmd
, "image", handle_etm_image_command
,
2063 COMMAND_EXEC
, "load image from <file> [base address]");
2065 register_command(cmd_ctx
, etm_cmd
, "dump", handle_etm_dump_command
,
2066 COMMAND_EXEC
, "dump captured trace data <file>");
2067 register_command(cmd_ctx
, etm_cmd
, "load", handle_etm_load_command
,
2068 COMMAND_EXEC
, "load trace data for analysis <file>");
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)