1 /***************************************************************************
2 * Copyright (C) 2005 by Dominic Rath *
3 * Dominic.Rath@gmx.de *
5 * This program is free software; you can redistribute it and/or modify *
6 * it under the terms of the GNU General Public License as published by *
7 * the Free Software Foundation; either version 2 of the License, or *
8 * (at your option) any later version. *
10 * This program is distributed in the hope that it will be useful, *
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of *
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
13 * GNU General Public License for more details. *
15 * You should have received a copy of the GNU General Public License *
16 * along with this program; if not, write to the *
17 * Free Software Foundation, Inc., *
18 * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
19 ***************************************************************************/
28 #include "arm_disassembler.h"
30 #include "etm_dummy.h"
32 #if BUILD_OOCD_TRACE == 1
33 #include "oocd_trace.h"
38 * ARM "Embedded Trace Macrocell" (ETM) support -- direct JTAG access.
40 * ETM modules collect instruction and/or data trace information, compress
41 * it, and transfer it to a debugging host through either a (buffered) trace
42 * port (often a 38-pin Mictor connector) or an Embedded Trace Buffer (ETB).
44 * There are several generations of these modules. Original versions have
45 * JTAG access through a dedicated scan chain. Recent versions have added
46 * access via coprocessor instructions, memory addressing, and the ARM Debug
47 * Interface v5 (ADIv5); and phased out direct JTAG access.
49 * This code supports up to the ETMv1.3 architecture, as seen in ETM9 and
50 * most common ARM9 systems. Note: "CoreSight ETM9" implements ETMv3.2,
51 * implying non-JTAG connectivity options.
53 * Relevant documentation includes:
54 * ARM DDI 0157G ... ETM9 (r2p2) Technical Reference Manual
55 * ARM DDI 0315B ... CoreSight ETM9 (r0p1) Technical Reference Manual
56 * ARM IHI 0014O ... Embedded Trace Macrocell, Architecture Specification
67 uint8_t size
; /* low-N of 32 bits */
68 uint8_t mode
; /* RO, WO, RW */
69 uint8_t bcd_vers
; /* 1.0, 2.0, etc */
74 * Registers 0..0x7f are JTAG-addressable using scanchain 6.
75 * (Or on some processors, through coprocessor operations.)
76 * Newer versions of ETM make some W/O registers R/W, and
77 * provide definitions for some previously-unused bits.
80 /* core registers used to version/configure the ETM */
81 static const struct etm_reg_info etm_core
[] = {
82 /* NOTE: we "know" the order here ... */
83 { ETM_CONFIG
, 32, RO
, 0x10, "ETM_config", },
84 { ETM_ID
, 32, RO
, 0x20, "ETM_id", },
87 /* basic registers that are always there given the right ETM version */
88 static const struct etm_reg_info etm_basic
[] = {
89 /* ETM Trace Registers */
90 { ETM_CTRL
, 32, RW
, 0x10, "ETM_ctrl", },
91 { ETM_TRIG_EVENT
, 17, WO
, 0x10, "ETM_trig_event", },
92 { ETM_ASIC_CTRL
, 8, WO
, 0x10, "ETM_asic_ctrl", },
93 { ETM_STATUS
, 3, RO
, 0x11, "ETM_status", },
94 { ETM_SYS_CONFIG
, 9, RO
, 0x12, "ETM_sys_config", },
96 /* TraceEnable configuration */
97 { ETM_TRACE_RESOURCE_CTRL
, 32, WO
, 0x12, "ETM_trace_resource_ctrl", },
98 { ETM_TRACE_EN_CTRL2
, 16, WO
, 0x12, "ETM_trace_en_ctrl2", },
99 { ETM_TRACE_EN_EVENT
, 17, WO
, 0x10, "ETM_trace_en_event", },
100 { ETM_TRACE_EN_CTRL1
, 26, WO
, 0x10, "ETM_trace_en_ctrl1", },
102 /* ViewData configuration (data trace) */
103 { ETM_VIEWDATA_EVENT
, 17, WO
, 0x10, "ETM_viewdata_event", },
104 { ETM_VIEWDATA_CTRL1
, 32, WO
, 0x10, "ETM_viewdata_ctrl1", },
105 { ETM_VIEWDATA_CTRL2
, 32, WO
, 0x10, "ETM_viewdata_ctrl2", },
106 { ETM_VIEWDATA_CTRL3
, 17, WO
, 0x10, "ETM_viewdata_ctrl3", },
108 /* REVISIT exclude VIEWDATA_CTRL2 when it's not there */
110 { 0x78, 12, WO
, 0x20, "ETM_sync_freq", },
111 { 0x7a, 22, RO
, 0x31, "ETM_config_code_ext", },
112 { 0x7b, 32, WO
, 0x31, "ETM_ext_input_select", },
113 { 0x7c, 32, WO
, 0x34, "ETM_trace_start_stop", },
114 { 0x7d, 8, WO
, 0x34, "ETM_behavior_control", },
117 static const struct etm_reg_info etm_fifofull
[] = {
118 /* FIFOFULL configuration */
119 { ETM_FIFOFULL_REGION
, 25, WO
, 0x10, "ETM_fifofull_region", },
120 { ETM_FIFOFULL_LEVEL
, 8, WO
, 0x10, "ETM_fifofull_level", },
123 static const struct etm_reg_info etm_addr_comp
[] = {
124 /* Address comparator register pairs */
125 #define ADDR_COMPARATOR(i) \
126 { ETM_ADDR_COMPARATOR_VALUE + (i) - 1, 32, WO, 0x10, \
127 "ETM_addr_" #i "_comparator_value", }, \
128 { ETM_ADDR_ACCESS_TYPE + (i) - 1, 7, WO, 0x10, \
129 "ETM_addr_" #i "_access_type", }
147 #undef ADDR_COMPARATOR
150 static const struct etm_reg_info etm_data_comp
[] = {
151 /* Data Value Comparators (NOTE: odd addresses are reserved) */
152 #define DATA_COMPARATOR(i) \
153 { ETM_DATA_COMPARATOR_VALUE + 2*(i) - 1, 32, WO, 0x10, \
154 "ETM_data_" #i "_comparator_value", }, \
155 { ETM_DATA_COMPARATOR_MASK + 2*(i) - 1, 32, WO, 0x10, \
156 "ETM_data_" #i "_comparator_mask", }
165 #undef DATA_COMPARATOR
168 static const struct etm_reg_info etm_counters
[] = {
169 #define ETM_COUNTER(i) \
170 { ETM_COUNTER_RELOAD_VALUE + (i) - 1, 16, WO, 0x10, \
171 "ETM_counter_" #i "_reload_value", }, \
172 { ETM_COUNTER_ENABLE + (i) - 1, 18, WO, 0x10, \
173 "ETM_counter_" #i "_enable", }, \
174 { ETM_COUNTER_RELOAD_EVENT + (i) - 1, 17, WO, 0x10, \
175 "ETM_counter_" #i "_reload_event", }, \
176 { ETM_COUNTER_VALUE + (i) - 1, 16, RO, 0x10, \
177 "ETM_counter_" #i "_value", }
185 static const struct etm_reg_info etm_sequencer
[] = {
187 { ETM_SEQUENCER_EVENT + (i), 17, WO, 0x10, \
188 "ETM_sequencer_event" #i, }
189 ETM_SEQ(0), /* 1->2 */
190 ETM_SEQ(1), /* 2->1 */
191 ETM_SEQ(2), /* 2->3 */
192 ETM_SEQ(3), /* 3->1 */
193 ETM_SEQ(4), /* 3->2 */
194 ETM_SEQ(5), /* 1->3 */
197 { ETM_SEQUENCER_STATE
, 2, RO
, 0x10, "ETM_sequencer_state", },
200 static const struct etm_reg_info etm_outputs
[] = {
201 #define ETM_OUTPUT(i) \
202 { ETM_EXTERNAL_OUTPUT + (i) - 1, 17, WO, 0x10, \
203 "ETM_external_output" #i, }
213 /* registers from 0x6c..0x7f were added after ETMv1.3 */
215 /* Context ID Comparators */
216 { 0x6c, 32, RO
, 0x20, "ETM_contextid_comparator_value1", }
217 { 0x6d, 32, RO
, 0x20, "ETM_contextid_comparator_value2", }
218 { 0x6e, 32, RO
, 0x20, "ETM_contextid_comparator_value3", }
219 { 0x6f, 32, RO
, 0x20, "ETM_contextid_comparator_mask", }
222 static int etm_get_reg(struct reg
*reg
);
223 static int etm_read_reg_w_check(struct reg
*reg
,
224 uint8_t* check_value
, uint8_t* check_mask
);
225 static int etm_register_user_commands(struct command_context
*cmd_ctx
);
226 static int etm_set_reg_w_exec(struct reg
*reg
, uint8_t *buf
);
227 static int etm_write_reg(struct reg
*reg
, uint32_t value
);
229 static const struct reg_arch_type etm_scan6_type
= {
231 .set
= etm_set_reg_w_exec
,
234 /* Look up register by ID ... most ETM instances only
235 * support a subset of the possible registers.
237 static struct reg
*etm_reg_lookup(struct etm_context
*etm_ctx
, unsigned id
)
239 struct reg_cache
*cache
= etm_ctx
->reg_cache
;
242 for (i
= 0; i
< cache
->num_regs
; i
++) {
243 struct etm_reg
*reg
= cache
->reg_list
[i
].arch_info
;
245 if (reg
->reg_info
->addr
== id
)
246 return &cache
->reg_list
[i
];
249 /* caller asking for nonexistent register is a bug! */
250 /* REVISIT say which of the N targets was involved */
251 LOG_ERROR("ETM: register 0x%02x not available", id
);
255 static void etm_reg_add(unsigned bcd_vers
, struct arm_jtag
*jtag_info
,
256 struct reg_cache
*cache
, struct etm_reg
*ereg
,
257 const struct etm_reg_info
*r
, unsigned nreg
)
259 struct reg
*reg
= cache
->reg_list
;
261 reg
+= cache
->num_regs
;
262 ereg
+= cache
->num_regs
;
264 /* add up to "nreg" registers from "r", if supported by this
265 * version of the ETM, to the specified cache.
267 for (; nreg
--; r
++) {
269 /* this ETM may be too old to have some registers */
270 if (r
->bcd_vers
> bcd_vers
)
275 reg
->value
= &ereg
->value
;
276 reg
->arch_info
= ereg
;
277 reg
->type
= &etm_scan6_type
;
282 ereg
->jtag_info
= jtag_info
;
287 struct reg_cache
*etm_build_reg_cache(struct target
*target
,
288 struct arm_jtag
*jtag_info
, struct etm_context
*etm_ctx
)
290 struct reg_cache
*reg_cache
= malloc(sizeof(struct reg_cache
));
291 struct reg
*reg_list
= NULL
;
292 struct etm_reg
*arch_info
= NULL
;
293 unsigned bcd_vers
, config
;
295 /* the actual registers are kept in two arrays */
296 reg_list
= calloc(128, sizeof(struct reg
));
297 arch_info
= calloc(128, sizeof(struct etm_reg
));
299 /* fill in values for the reg cache */
300 reg_cache
->name
= "etm registers";
301 reg_cache
->next
= NULL
;
302 reg_cache
->reg_list
= reg_list
;
303 reg_cache
->num_regs
= 0;
305 /* add ETM_CONFIG, then parse its values to see
306 * which other registers exist in this ETM
308 etm_reg_add(0x10, jtag_info
, reg_cache
, arch_info
,
311 etm_get_reg(reg_list
);
312 etm_ctx
->config
= buf_get_u32((void *)&arch_info
->value
, 0, 32);
313 config
= etm_ctx
->config
;
315 /* figure ETM version then add base registers */
316 if (config
& (1 << 31)) {
318 LOG_WARNING("ETMv2+ support is incomplete");
320 /* REVISIT more registers may exist; they may now be
321 * readable; more register bits have defined meanings;
322 * don't presume trace start/stop support is present;
323 * and include any context ID comparator registers.
325 etm_reg_add(0x20, jtag_info
, reg_cache
, arch_info
,
327 etm_get_reg(reg_list
+ 1);
328 etm_ctx
->id
= buf_get_u32(
329 (void *)&arch_info
[1].value
, 0, 32);
330 LOG_DEBUG("ETM ID: %08x", (unsigned) etm_ctx
->id
);
331 bcd_vers
= 0x10 + (((etm_ctx
->id
) >> 4) & 0xff);
334 switch (config
>> 28) {
351 LOG_WARNING("Bad ETMv1 protocol %d", config
>> 28);
355 etm_ctx
->bcd_vers
= bcd_vers
;
356 LOG_INFO("ETM v%d.%d", bcd_vers
>> 4, bcd_vers
& 0xf);
358 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
359 etm_basic
, ARRAY_SIZE(etm_basic
));
361 /* address and data comparators; counters; outputs */
362 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
363 etm_addr_comp
, 4 * (0x0f & (config
>> 0)));
364 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
365 etm_data_comp
, 2 * (0x0f & (config
>> 4)));
366 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
367 etm_counters
, 4 * (0x07 & (config
>> 13)));
368 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
369 etm_outputs
, (0x07 & (config
>> 20)));
371 /* FIFOFULL presence is optional
372 * REVISIT for ETMv1.2 and later, don't bother adding this
373 * unless ETM_SYS_CONFIG says it's also *supported* ...
375 if (config
& (1 << 23))
376 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
377 etm_fifofull
, ARRAY_SIZE(etm_fifofull
));
379 /* sequencer is optional (for state-dependant triggering) */
380 if (config
& (1 << 16))
381 etm_reg_add(bcd_vers
, jtag_info
, reg_cache
, arch_info
,
382 etm_sequencer
, ARRAY_SIZE(etm_sequencer
));
384 /* REVISIT could realloc and likely save half the memory
385 * in the two chunks we allocated...
388 /* the ETM might have an ETB connected */
389 if (strcmp(etm_ctx
->capture_driver
->name
, "etb") == 0)
391 struct etb
*etb
= etm_ctx
->capture_driver_priv
;
395 LOG_ERROR("etb selected as etm capture driver, but no ETB configured");
399 reg_cache
->next
= etb_build_reg_cache(etb
);
401 etb
->reg_cache
= reg_cache
->next
;
404 etm_ctx
->reg_cache
= reg_cache
;
414 static int etm_read_reg(struct reg
*reg
)
416 return etm_read_reg_w_check(reg
, NULL
, NULL
);
419 static int etm_store_reg(struct reg
*reg
)
421 return etm_write_reg(reg
, buf_get_u32(reg
->value
, 0, reg
->size
));
424 int etm_setup(struct target
*target
)
427 uint32_t etm_ctrl_value
;
428 struct arm
*arm
= target_to_arm(target
);
429 struct etm_context
*etm_ctx
= arm
->etm
;
430 struct reg
*etm_ctrl_reg
;
432 etm_ctrl_reg
= etm_reg_lookup(etm_ctx
, ETM_CTRL
);
436 /* initialize some ETM control register settings */
437 etm_get_reg(etm_ctrl_reg
);
438 etm_ctrl_value
= buf_get_u32(etm_ctrl_reg
->value
, 0, 32);
440 /* clear the ETM powerdown bit (0) */
441 etm_ctrl_value
&= ~ETM_CTRL_POWERDOWN
;
443 /* configure port width (21,6:4), mode (13,17:16) and
444 * for older modules clocking (13)
446 etm_ctrl_value
= (etm_ctrl_value
447 & ~ETM_PORT_WIDTH_MASK
448 & ~ETM_PORT_MODE_MASK
449 & ~ETM_PORT_CLOCK_MASK
)
452 buf_set_u32(etm_ctrl_reg
->value
, 0, 32, etm_ctrl_value
);
453 etm_store_reg(etm_ctrl_reg
);
455 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
458 /* REVISIT for ETMv3.0 and later, read ETM_sys_config to
459 * verify that those width and mode settings are OK ...
462 if ((retval
= etm_ctx
->capture_driver
->init(etm_ctx
)) != ERROR_OK
)
464 LOG_ERROR("ETM capture driver initialization failed");
470 static int etm_get_reg(struct reg
*reg
)
474 if ((retval
= etm_read_reg(reg
)) != ERROR_OK
)
476 LOG_ERROR("BUG: error scheduling etm register read");
480 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
482 LOG_ERROR("register read failed");
489 static int etm_read_reg_w_check(struct reg
*reg
,
490 uint8_t* check_value
, uint8_t* check_mask
)
492 struct etm_reg
*etm_reg
= reg
->arch_info
;
493 const struct etm_reg_info
*r
= etm_reg
->reg_info
;
494 uint8_t reg_addr
= r
->addr
& 0x7f;
495 struct scan_field fields
[3];
497 if (etm_reg
->reg_info
->mode
== WO
) {
498 LOG_ERROR("BUG: can't read write-only register %s", r
->name
);
499 return ERROR_INVALID_ARGUMENTS
;
502 LOG_DEBUG("%s (%u)", r
->name
, reg_addr
);
504 jtag_set_end_state(TAP_IDLE
);
505 arm_jtag_scann(etm_reg
->jtag_info
, 0x6);
506 arm_jtag_set_instr(etm_reg
->jtag_info
, etm_reg
->jtag_info
->intest_instr
, NULL
);
508 fields
[0].tap
= etm_reg
->jtag_info
->tap
;
509 fields
[0].num_bits
= 32;
510 fields
[0].out_value
= reg
->value
;
511 fields
[0].in_value
= NULL
;
512 fields
[0].check_value
= NULL
;
513 fields
[0].check_mask
= NULL
;
515 fields
[1].tap
= etm_reg
->jtag_info
->tap
;
516 fields
[1].num_bits
= 7;
517 fields
[1].out_value
= malloc(1);
518 buf_set_u32(fields
[1].out_value
, 0, 7, reg_addr
);
519 fields
[1].in_value
= NULL
;
520 fields
[1].check_value
= NULL
;
521 fields
[1].check_mask
= NULL
;
523 fields
[2].tap
= etm_reg
->jtag_info
->tap
;
524 fields
[2].num_bits
= 1;
525 fields
[2].out_value
= malloc(1);
526 buf_set_u32(fields
[2].out_value
, 0, 1, 0);
527 fields
[2].in_value
= NULL
;
528 fields
[2].check_value
= NULL
;
529 fields
[2].check_mask
= NULL
;
531 jtag_add_dr_scan(3, fields
, jtag_get_end_state());
533 fields
[0].in_value
= reg
->value
;
534 fields
[0].check_value
= check_value
;
535 fields
[0].check_mask
= check_mask
;
537 jtag_add_dr_scan_check(3, fields
, jtag_get_end_state());
539 free(fields
[1].out_value
);
540 free(fields
[2].out_value
);
545 static int etm_set_reg(struct reg
*reg
, uint32_t value
)
549 if ((retval
= etm_write_reg(reg
, value
)) != ERROR_OK
)
551 LOG_ERROR("BUG: error scheduling etm register write");
555 buf_set_u32(reg
->value
, 0, reg
->size
, value
);
562 static int etm_set_reg_w_exec(struct reg
*reg
, uint8_t *buf
)
566 etm_set_reg(reg
, buf_get_u32(buf
, 0, reg
->size
));
568 if ((retval
= jtag_execute_queue()) != ERROR_OK
)
570 LOG_ERROR("register write failed");
576 static int etm_write_reg(struct reg
*reg
, uint32_t value
)
578 struct etm_reg
*etm_reg
= reg
->arch_info
;
579 const struct etm_reg_info
*r
= etm_reg
->reg_info
;
580 uint8_t reg_addr
= r
->addr
& 0x7f;
581 struct scan_field fields
[3];
583 if (etm_reg
->reg_info
->mode
== RO
) {
584 LOG_ERROR("BUG: can't write read--only register %s", r
->name
);
585 return ERROR_INVALID_ARGUMENTS
;
588 LOG_DEBUG("%s (%u): 0x%8.8" PRIx32
"", r
->name
, reg_addr
, value
);
590 jtag_set_end_state(TAP_IDLE
);
591 arm_jtag_scann(etm_reg
->jtag_info
, 0x6);
592 arm_jtag_set_instr(etm_reg
->jtag_info
, etm_reg
->jtag_info
->intest_instr
, NULL
);
594 fields
[0].tap
= etm_reg
->jtag_info
->tap
;
595 fields
[0].num_bits
= 32;
597 fields
[0].out_value
= tmp1
;
598 buf_set_u32(fields
[0].out_value
, 0, 32, value
);
599 fields
[0].in_value
= NULL
;
601 fields
[1].tap
= etm_reg
->jtag_info
->tap
;
602 fields
[1].num_bits
= 7;
604 fields
[1].out_value
= &tmp2
;
605 buf_set_u32(fields
[1].out_value
, 0, 7, reg_addr
);
606 fields
[1].in_value
= NULL
;
608 fields
[2].tap
= etm_reg
->jtag_info
->tap
;
609 fields
[2].num_bits
= 1;
611 fields
[2].out_value
= &tmp3
;
612 buf_set_u32(fields
[2].out_value
, 0, 1, 1);
613 fields
[2].in_value
= NULL
;
615 jtag_add_dr_scan(3, fields
, jtag_get_end_state());
621 /* ETM trace analysis functionality */
623 static struct etm_capture_driver
*etm_capture_drivers
[] =
626 &etm_dummy_capture_driver
,
627 #if BUILD_OOCD_TRACE == 1
628 &oocd_trace_capture_driver
,
633 static int etm_read_instruction(struct etm_context
*ctx
, struct arm_instruction
*instruction
)
642 return ERROR_TRACE_IMAGE_UNAVAILABLE
;
644 /* search for the section the current instruction belongs to */
645 for (i
= 0; i
< ctx
->image
->num_sections
; i
++)
647 if ((ctx
->image
->sections
[i
].base_address
<= ctx
->current_pc
) &&
648 (ctx
->image
->sections
[i
].base_address
+ ctx
->image
->sections
[i
].size
> ctx
->current_pc
))
657 /* current instruction couldn't be found in the image */
658 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE
;
661 if (ctx
->core_state
== ARM_STATE_ARM
)
664 if ((retval
= image_read_section(ctx
->image
, section
,
665 ctx
->current_pc
- ctx
->image
->sections
[section
].base_address
,
666 4, buf
, &size_read
)) != ERROR_OK
)
668 LOG_ERROR("error while reading instruction: %i", retval
);
669 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE
;
671 opcode
= target_buffer_get_u32(ctx
->target
, buf
);
672 arm_evaluate_opcode(opcode
, ctx
->current_pc
, instruction
);
674 else if (ctx
->core_state
== ARM_STATE_THUMB
)
677 if ((retval
= image_read_section(ctx
->image
, section
,
678 ctx
->current_pc
- ctx
->image
->sections
[section
].base_address
,
679 2, buf
, &size_read
)) != ERROR_OK
)
681 LOG_ERROR("error while reading instruction: %i", retval
);
682 return ERROR_TRACE_INSTRUCTION_UNAVAILABLE
;
684 opcode
= target_buffer_get_u16(ctx
->target
, buf
);
685 thumb_evaluate_opcode(opcode
, ctx
->current_pc
, instruction
);
687 else if (ctx
->core_state
== ARM_STATE_JAZELLE
)
689 LOG_ERROR("BUG: tracing of jazelle code not supported");
694 LOG_ERROR("BUG: unknown core state encountered");
701 static int etmv1_next_packet(struct etm_context
*ctx
, uint8_t *packet
, int apo
)
703 while (ctx
->data_index
< ctx
->trace_depth
)
705 /* if the caller specified an address packet offset, skip until the
706 * we reach the n-th cycle marked with tracesync */
709 if (ctx
->trace_data
[ctx
->data_index
].flags
& ETMV1_TRACESYNC_CYCLE
)
720 /* no tracedata output during a TD cycle
721 * or in a trigger cycle */
722 if ((ctx
->trace_data
[ctx
->data_index
].pipestat
== STAT_TD
)
723 || (ctx
->trace_data
[ctx
->data_index
].flags
& ETMV1_TRIGGER_CYCLE
))
730 /* FIXME there are more port widths than these... */
731 if ((ctx
->control
& ETM_PORT_WIDTH_MASK
) == ETM_PORT_16BIT
)
733 if (ctx
->data_half
== 0)
735 *packet
= ctx
->trace_data
[ctx
->data_index
].packet
& 0xff;
740 *packet
= (ctx
->trace_data
[ctx
->data_index
].packet
& 0xff00) >> 8;
745 else if ((ctx
->control
& ETM_PORT_WIDTH_MASK
) == ETM_PORT_8BIT
)
747 *packet
= ctx
->trace_data
[ctx
->data_index
].packet
& 0xff;
752 /* on a 4-bit port, a packet will be output during two consecutive cycles */
753 if (ctx
->data_index
> (ctx
->trace_depth
- 2))
756 *packet
= ctx
->trace_data
[ctx
->data_index
].packet
& 0xf;
757 *packet
|= (ctx
->trace_data
[ctx
->data_index
+ 1].packet
& 0xf) << 4;
758 ctx
->data_index
+= 2;
767 static int etmv1_branch_address(struct etm_context
*ctx
)
775 /* quit analysis if less than two cycles are left in the trace
776 * because we can't extract the APO */
777 if (ctx
->data_index
> (ctx
->trace_depth
- 2))
780 /* a BE could be output during an APO cycle, skip the current
781 * and continue with the new one */
782 if (ctx
->trace_data
[ctx
->pipe_index
+ 1].pipestat
& 0x4)
784 if (ctx
->trace_data
[ctx
->pipe_index
+ 2].pipestat
& 0x4)
787 /* address packet offset encoded in the next two cycles' pipestat bits */
788 apo
= ctx
->trace_data
[ctx
->pipe_index
+ 1].pipestat
& 0x3;
789 apo
|= (ctx
->trace_data
[ctx
->pipe_index
+ 2].pipestat
& 0x3) << 2;
791 /* count number of tracesync cycles between current pipe_index and data_index
792 * i.e. the number of tracesyncs that data_index already passed by
793 * to subtract them from the APO */
794 for (i
= ctx
->pipe_index
; i
< ctx
->data_index
; i
++)
796 if (ctx
->trace_data
[ctx
->pipe_index
+ 1].pipestat
& ETMV1_TRACESYNC_CYCLE
)
800 /* extract up to four 7-bit packets */
802 if ((retval
= etmv1_next_packet(ctx
, &packet
, (shift
== 0) ? apo
+ 1 : 0)) != 0)
804 ctx
->last_branch
&= ~(0x7f << shift
);
805 ctx
->last_branch
|= (packet
& 0x7f) << shift
;
807 } while ((packet
& 0x80) && (shift
< 28));
809 /* one last packet holding 4 bits of the address, plus the branch reason code */
810 if ((shift
== 28) && (packet
& 0x80))
812 if ((retval
= etmv1_next_packet(ctx
, &packet
, 0)) != 0)
814 ctx
->last_branch
&= 0x0fffffff;
815 ctx
->last_branch
|= (packet
& 0x0f) << 28;
816 ctx
->last_branch_reason
= (packet
& 0x70) >> 4;
821 ctx
->last_branch_reason
= 0;
829 /* if a full address was output, we might have branched into Jazelle state */
830 if ((shift
== 32) && (packet
& 0x80))
832 ctx
->core_state
= ARM_STATE_JAZELLE
;
836 /* if we didn't branch into Jazelle state, the current processor state is
837 * encoded in bit 0 of the branch target address */
838 if (ctx
->last_branch
& 0x1)
840 ctx
->core_state
= ARM_STATE_THUMB
;
841 ctx
->last_branch
&= ~0x1;
845 ctx
->core_state
= ARM_STATE_ARM
;
846 ctx
->last_branch
&= ~0x3;
853 static int etmv1_data(struct etm_context
*ctx
, int size
, uint32_t *data
)
859 for (j
= 0; j
< size
; j
++)
861 if ((retval
= etmv1_next_packet(ctx
, &buf
[j
], 0)) != 0)
867 LOG_ERROR("TODO: add support for 64-bit values");
871 *data
= target_buffer_get_u32(ctx
->target
, buf
);
873 *data
= target_buffer_get_u16(ctx
->target
, buf
);
882 static int etmv1_analyze_trace(struct etm_context
*ctx
, struct command_context
*cmd_ctx
)
885 struct arm_instruction instruction
;
887 /* read the trace data if it wasn't read already */
888 if (ctx
->trace_depth
== 0)
889 ctx
->capture_driver
->read_trace(ctx
);
891 /* start at the beginning of the captured trace */
896 /* neither the PC nor the data pointer are valid */
900 while (ctx
->pipe_index
< ctx
->trace_depth
)
902 uint8_t pipestat
= ctx
->trace_data
[ctx
->pipe_index
].pipestat
;
903 uint32_t next_pc
= ctx
->current_pc
;
904 uint32_t old_data_index
= ctx
->data_index
;
905 uint32_t old_data_half
= ctx
->data_half
;
906 uint32_t old_index
= ctx
->pipe_index
;
907 uint32_t last_instruction
= ctx
->last_instruction
;
909 int current_pc_ok
= ctx
->pc_ok
;
911 if (ctx
->trace_data
[ctx
->pipe_index
].flags
& ETMV1_TRIGGER_CYCLE
)
913 command_print(cmd_ctx
, "--- trigger ---");
916 /* instructions execute in IE/D or BE/D cycles */
917 if ((pipestat
== STAT_IE
) || (pipestat
== STAT_ID
))
918 ctx
->last_instruction
= ctx
->pipe_index
;
920 /* if we don't have a valid pc skip until we reach an indirect branch */
921 if ((!ctx
->pc_ok
) && (pipestat
!= STAT_BE
))
927 /* any indirect branch could have interrupted instruction flow
928 * - the branch reason code could indicate a trace discontinuity
929 * - a branch to the exception vectors indicates an exception
931 if ((pipestat
== STAT_BE
) || (pipestat
== STAT_BD
))
933 /* backup current data index, to be able to consume the branch address
934 * before examining data address and values
936 old_data_index
= ctx
->data_index
;
937 old_data_half
= ctx
->data_half
;
939 ctx
->last_instruction
= ctx
->pipe_index
;
941 if ((retval
= etmv1_branch_address(ctx
)) != 0)
943 /* negative return value from etmv1_branch_address means we ran out of packets,
944 * quit analysing the trace */
948 /* a positive return values means the current branch was abandoned,
949 * and a new branch was encountered in cycle ctx->pipe_index + retval;
951 LOG_WARNING("abandoned branch encountered, correctnes of analysis uncertain");
952 ctx
->pipe_index
+= retval
;
956 /* skip over APO cycles */
957 ctx
->pipe_index
+= 2;
959 switch (ctx
->last_branch_reason
)
961 case 0x0: /* normal PC change */
962 next_pc
= ctx
->last_branch
;
964 case 0x1: /* tracing enabled */
965 command_print(cmd_ctx
, "--- tracing enabled at 0x%8.8" PRIx32
" ---", ctx
->last_branch
);
966 ctx
->current_pc
= ctx
->last_branch
;
970 case 0x2: /* trace restarted after FIFO overflow */
971 command_print(cmd_ctx
, "--- trace restarted after FIFO overflow at 0x%8.8" PRIx32
" ---", ctx
->last_branch
);
972 ctx
->current_pc
= ctx
->last_branch
;
976 case 0x3: /* exit from debug state */
977 command_print(cmd_ctx
, "--- exit from debug state at 0x%8.8" PRIx32
" ---", ctx
->last_branch
);
978 ctx
->current_pc
= ctx
->last_branch
;
982 case 0x4: /* periodic synchronization point */
983 next_pc
= ctx
->last_branch
;
984 /* if we had no valid PC prior to this synchronization point,
985 * we have to move on with the next trace cycle
989 command_print(cmd_ctx
, "--- periodic synchronization point at 0x%8.8" PRIx32
" ---", next_pc
);
990 ctx
->current_pc
= next_pc
;
995 default: /* reserved */
996 LOG_ERROR("BUG: branch reason code 0x%" PRIx32
" is reserved", ctx
->last_branch_reason
);
1000 /* if we got here the branch was a normal PC change
1001 * (or a periodic synchronization point, which means the same for that matter)
1002 * if we didn't accquire a complete PC continue with the next cycle
1007 /* indirect branch to the exception vector means an exception occured */
1008 if ((ctx
->last_branch
<= 0x20)
1009 || ((ctx
->last_branch
>= 0xffff0000) && (ctx
->last_branch
<= 0xffff0020)))
1011 if ((ctx
->last_branch
& 0xff) == 0x10)
1013 command_print(cmd_ctx
, "data abort");
1017 command_print(cmd_ctx
, "exception vector 0x%2.2" PRIx32
"", ctx
->last_branch
);
1018 ctx
->current_pc
= ctx
->last_branch
;
1025 /* an instruction was executed (or not, depending on the condition flags)
1026 * retrieve it from the image for displaying */
1027 if (ctx
->pc_ok
&& (pipestat
!= STAT_WT
) && (pipestat
!= STAT_TD
) &&
1028 !(((pipestat
== STAT_BE
) || (pipestat
== STAT_BD
)) &&
1029 ((ctx
->last_branch_reason
!= 0x0) && (ctx
->last_branch_reason
!= 0x4))))
1031 if ((retval
= etm_read_instruction(ctx
, &instruction
)) != ERROR_OK
)
1033 /* can't continue tracing with no image available */
1034 if (retval
== ERROR_TRACE_IMAGE_UNAVAILABLE
)
1038 else if (retval
== ERROR_TRACE_INSTRUCTION_UNAVAILABLE
)
1040 /* TODO: handle incomplete images
1041 * for now we just quit the analsysis*/
1046 cycles
= old_index
- last_instruction
;
1049 if ((pipestat
== STAT_ID
) || (pipestat
== STAT_BD
))
1051 uint32_t new_data_index
= ctx
->data_index
;
1052 uint32_t new_data_half
= ctx
->data_half
;
1054 /* in case of a branch with data, the branch target address was consumed before
1055 * we temporarily go back to the saved data index */
1056 if (pipestat
== STAT_BD
)
1058 ctx
->data_index
= old_data_index
;
1059 ctx
->data_half
= old_data_half
;
1062 if (ctx
->tracemode
& ETMV1_TRACE_ADDR
)
1068 if ((retval
= etmv1_next_packet(ctx
, &packet
, 0)) != 0)
1069 return ERROR_ETM_ANALYSIS_FAILED
;
1070 ctx
->last_ptr
&= ~(0x7f << shift
);
1071 ctx
->last_ptr
|= (packet
& 0x7f) << shift
;
1073 } while ((packet
& 0x80) && (shift
< 32));
1080 command_print(cmd_ctx
, "address: 0x%8.8" PRIx32
"", ctx
->last_ptr
);
1084 if (ctx
->tracemode
& ETMV1_TRACE_DATA
)
1086 if ((instruction
.type
== ARM_LDM
) || (instruction
.type
== ARM_STM
))
1089 for (i
= 0; i
< 16; i
++)
1091 if (instruction
.info
.load_store_multiple
.register_list
& (1 << i
))
1094 if (etmv1_data(ctx
, 4, &data
) != 0)
1095 return ERROR_ETM_ANALYSIS_FAILED
;
1096 command_print(cmd_ctx
, "data: 0x%8.8" PRIx32
"", data
);
1100 else if ((instruction
.type
>= ARM_LDR
) && (instruction
.type
<= ARM_STRH
))
1103 if (etmv1_data(ctx
, arm_access_size(&instruction
), &data
) != 0)
1104 return ERROR_ETM_ANALYSIS_FAILED
;
1105 command_print(cmd_ctx
, "data: 0x%8.8" PRIx32
"", data
);
1109 /* restore data index after consuming BD address and data */
1110 if (pipestat
== STAT_BD
)
1112 ctx
->data_index
= new_data_index
;
1113 ctx
->data_half
= new_data_half
;
1118 if ((pipestat
== STAT_IE
) || (pipestat
== STAT_ID
))
1120 if (((instruction
.type
== ARM_B
) ||
1121 (instruction
.type
== ARM_BL
) ||
1122 (instruction
.type
== ARM_BLX
)) &&
1123 (instruction
.info
.b_bl_bx_blx
.target_address
!= 0xffffffff))
1125 next_pc
= instruction
.info
.b_bl_bx_blx
.target_address
;
1129 next_pc
+= (ctx
->core_state
== ARM_STATE_ARM
) ? 4 : 2;
1132 else if (pipestat
== STAT_IN
)
1134 next_pc
+= (ctx
->core_state
== ARM_STATE_ARM
) ? 4 : 2;
1137 if ((pipestat
!= STAT_TD
) && (pipestat
!= STAT_WT
))
1139 char cycles_text
[32] = "";
1141 /* if the trace was captured with cycle accurate tracing enabled,
1142 * output the number of cycles since the last executed instruction
1144 if (ctx
->tracemode
& ETMV1_CYCLE_ACCURATE
)
1146 snprintf(cycles_text
, 32, " (%i %s)",
1148 (cycles
== 1) ? "cycle" : "cycles");
1151 command_print(cmd_ctx
, "%s%s%s",
1153 (pipestat
== STAT_IN
) ? " (not executed)" : "",
1156 ctx
->current_pc
= next_pc
;
1158 /* packets for an instruction don't start on or before the preceding
1159 * functional pipestat (i.e. other than WT or TD)
1161 if (ctx
->data_index
<= ctx
->pipe_index
)
1163 ctx
->data_index
= ctx
->pipe_index
+ 1;
1168 ctx
->pipe_index
+= 1;
1174 static COMMAND_HELPER(handle_etm_tracemode_command_update
,
1179 /* what parts of data access are traced? */
1180 if (strcmp(CMD_ARGV
[0], "none") == 0)
1181 tracemode
= ETMV1_TRACE_NONE
;
1182 else if (strcmp(CMD_ARGV
[0], "data") == 0)
1183 tracemode
= ETMV1_TRACE_DATA
;
1184 else if (strcmp(CMD_ARGV
[0], "address") == 0)
1185 tracemode
= ETMV1_TRACE_ADDR
;
1186 else if (strcmp(CMD_ARGV
[0], "all") == 0)
1187 tracemode
= ETMV1_TRACE_DATA
| ETMV1_TRACE_ADDR
;
1190 command_print(CMD_CTX
, "invalid option '%s'", CMD_ARGV
[0]);
1191 return ERROR_INVALID_ARGUMENTS
;
1195 COMMAND_PARSE_NUMBER(u8
, CMD_ARGV
[1], context_id
);
1199 tracemode
|= ETMV1_CONTEXTID_NONE
;
1202 tracemode
|= ETMV1_CONTEXTID_8
;
1205 tracemode
|= ETMV1_CONTEXTID_16
;
1208 tracemode
|= ETMV1_CONTEXTID_32
;
1211 command_print(CMD_CTX
, "invalid option '%s'", CMD_ARGV
[1]);
1212 return ERROR_INVALID_ARGUMENTS
;
1215 bool etmv1_cycle_accurate
;
1216 COMMAND_PARSE_ENABLE(CMD_ARGV
[2], etmv1_cycle_accurate
);
1217 if (etmv1_cycle_accurate
)
1218 tracemode
|= ETMV1_CYCLE_ACCURATE
;
1220 bool etmv1_branch_output
;
1221 COMMAND_PARSE_ENABLE(CMD_ARGV
[3], etmv1_branch_output
);
1222 if (etmv1_branch_output
)
1223 tracemode
|= ETMV1_BRANCH_OUTPUT
;
1226 * - CPRT tracing (coprocessor register transfers)
1227 * - debug request (causes debug entry on trigger)
1228 * - stall on FIFOFULL (preventing tracedata lossage)
1235 COMMAND_HANDLER(handle_etm_tracemode_command
)
1237 struct target
*target
= get_current_target(CMD_CTX
);
1238 struct arm
*arm
= target_to_arm(target
);
1239 struct etm_context
*etm
;
1242 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1248 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1252 uint32_t tracemode
= etm
->tracemode
;
1259 CALL_COMMAND_HANDLER(handle_etm_tracemode_command_update
, &tracemode
);
1262 command_print(CMD_CTX
, "usage: configure trace mode "
1263 "<none | data | address | all> "
1264 "<context id bits> <cycle accurate> <branch output>");
1269 * todo: fail if parameters were invalid for this hardware,
1270 * or couldn't be written; display actual hardware state...
1273 command_print(CMD_CTX
, "current tracemode configuration:");
1275 switch (tracemode
& ETMV1_TRACE_MASK
)
1277 case ETMV1_TRACE_NONE
:
1278 command_print(CMD_CTX
, "data tracing: none");
1280 case ETMV1_TRACE_DATA
:
1281 command_print(CMD_CTX
, "data tracing: data only");
1283 case ETMV1_TRACE_ADDR
:
1284 command_print(CMD_CTX
, "data tracing: address only");
1286 case ETMV1_TRACE_DATA
| ETMV1_TRACE_ADDR
:
1287 command_print(CMD_CTX
, "data tracing: address and data");
1291 switch (tracemode
& ETMV1_CONTEXTID_MASK
)
1293 case ETMV1_CONTEXTID_NONE
:
1294 command_print(CMD_CTX
, "contextid tracing: none");
1296 case ETMV1_CONTEXTID_8
:
1297 command_print(CMD_CTX
, "contextid tracing: 8 bit");
1299 case ETMV1_CONTEXTID_16
:
1300 command_print(CMD_CTX
, "contextid tracing: 16 bit");
1302 case ETMV1_CONTEXTID_32
:
1303 command_print(CMD_CTX
, "contextid tracing: 32 bit");
1307 if (tracemode
& ETMV1_CYCLE_ACCURATE
)
1309 command_print(CMD_CTX
, "cycle-accurate tracing enabled");
1313 command_print(CMD_CTX
, "cycle-accurate tracing disabled");
1316 if (tracemode
& ETMV1_BRANCH_OUTPUT
)
1318 command_print(CMD_CTX
, "full branch address output enabled");
1322 command_print(CMD_CTX
, "full branch address output disabled");
1325 /* only update ETM_CTRL register if tracemode changed */
1326 if (etm
->tracemode
!= tracemode
)
1328 struct reg
*etm_ctrl_reg
;
1330 etm_ctrl_reg
= etm_reg_lookup(etm
, ETM_CTRL
);
1334 etm_get_reg(etm_ctrl_reg
);
1336 buf_set_u32(etm_ctrl_reg
->value
, 2, 2, tracemode
& ETMV1_TRACE_MASK
);
1337 buf_set_u32(etm_ctrl_reg
->value
, 14, 2, (tracemode
& ETMV1_CONTEXTID_MASK
) >> 4);
1338 buf_set_u32(etm_ctrl_reg
->value
, 12, 1, (tracemode
& ETMV1_CYCLE_ACCURATE
) >> 8);
1339 buf_set_u32(etm_ctrl_reg
->value
, 8, 1, (tracemode
& ETMV1_BRANCH_OUTPUT
) >> 9);
1340 etm_store_reg(etm_ctrl_reg
);
1342 etm
->tracemode
= tracemode
;
1344 /* invalidate old trace data */
1345 etm
->capture_status
= TRACE_IDLE
;
1346 if (etm
->trace_depth
> 0)
1348 free(etm
->trace_data
);
1349 etm
->trace_data
= NULL
;
1351 etm
->trace_depth
= 0;
1357 COMMAND_HANDLER(handle_etm_config_command
)
1359 struct target
*target
;
1361 uint32_t portmode
= 0x0;
1362 struct etm_context
*etm_ctx
;
1366 return ERROR_COMMAND_SYNTAX_ERROR
;
1368 target
= get_target(CMD_ARGV
[0]);
1371 LOG_ERROR("target '%s' not defined", CMD_ARGV
[0]);
1375 arm
= target_to_arm(target
);
1377 command_print(CMD_CTX
, "target '%s' is '%s'; not an ARM",
1378 target_name(target
),
1379 target_type_name(target
));
1383 /* FIXME for ETMv3.0 and above -- and we don't yet know what ETM
1384 * version we'll be using!! -- so we can't know how to validate
1385 * params yet. "etm config" should likely be *AFTER* hookup...
1387 * - Many more widths might be supported ... and we can easily
1388 * check whether our setting "took".
1390 * - The "clock" and "mode" bits are interpreted differently.
1391 * See ARM IHI 0014O table 2-17 for the old behavior, and
1392 * table 2-18 for the new. With ETB it's best to specify
1396 COMMAND_PARSE_NUMBER(u8
, CMD_ARGV
[1], port_width
);
1399 /* before ETMv3.0 */
1401 portmode
|= ETM_PORT_4BIT
;
1404 portmode
|= ETM_PORT_8BIT
;
1407 portmode
|= ETM_PORT_16BIT
;
1409 /* ETMv3.0 and later*/
1411 portmode
|= ETM_PORT_24BIT
;
1414 portmode
|= ETM_PORT_32BIT
;
1417 portmode
|= ETM_PORT_48BIT
;
1420 portmode
|= ETM_PORT_64BIT
;
1423 portmode
|= ETM_PORT_1BIT
;
1426 portmode
|= ETM_PORT_2BIT
;
1429 command_print(CMD_CTX
,
1430 "unsupported ETM port width '%s'", CMD_ARGV
[1]);
1434 if (strcmp("normal", CMD_ARGV
[2]) == 0)
1436 portmode
|= ETM_PORT_NORMAL
;
1438 else if (strcmp("multiplexed", CMD_ARGV
[2]) == 0)
1440 portmode
|= ETM_PORT_MUXED
;
1442 else if (strcmp("demultiplexed", CMD_ARGV
[2]) == 0)
1444 portmode
|= ETM_PORT_DEMUXED
;
1448 command_print(CMD_CTX
, "unsupported ETM port mode '%s', must be 'normal', 'multiplexed' or 'demultiplexed'", CMD_ARGV
[2]);
1452 if (strcmp("half", CMD_ARGV
[3]) == 0)
1454 portmode
|= ETM_PORT_HALF_CLOCK
;
1456 else if (strcmp("full", CMD_ARGV
[3]) == 0)
1458 portmode
|= ETM_PORT_FULL_CLOCK
;
1462 command_print(CMD_CTX
, "unsupported ETM port clocking '%s', must be 'full' or 'half'", CMD_ARGV
[3]);
1466 etm_ctx
= calloc(1, sizeof(struct etm_context
));
1468 LOG_DEBUG("out of memory");
1472 for (i
= 0; etm_capture_drivers
[i
]; i
++)
1474 if (strcmp(CMD_ARGV
[4], etm_capture_drivers
[i
]->name
) == 0)
1476 int retval
= register_commands(CMD_CTX
, NULL
,
1477 etm_capture_drivers
[i
]->commands
);
1478 if (ERROR_OK
!= retval
)
1484 etm_ctx
->capture_driver
= etm_capture_drivers
[i
];
1490 if (!etm_capture_drivers
[i
])
1492 /* no supported capture driver found, don't register an ETM */
1494 LOG_ERROR("trace capture driver '%s' not found", CMD_ARGV
[4]);
1498 etm_ctx
->target
= target
;
1499 etm_ctx
->trace_data
= NULL
;
1500 etm_ctx
->control
= portmode
;
1501 etm_ctx
->core_state
= ARM_STATE_ARM
;
1505 return etm_register_user_commands(CMD_CTX
);
1508 COMMAND_HANDLER(handle_etm_info_command
)
1510 struct target
*target
;
1512 struct etm_context
*etm
;
1513 struct reg
*etm_sys_config_reg
;
1517 target
= get_current_target(CMD_CTX
);
1518 arm
= target_to_arm(target
);
1521 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1528 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1532 command_print(CMD_CTX
, "ETM v%d.%d",
1533 etm
->bcd_vers
>> 4, etm
->bcd_vers
& 0xf);
1534 command_print(CMD_CTX
, "pairs of address comparators: %i",
1535 (int) (etm
->config
>> 0) & 0x0f);
1536 command_print(CMD_CTX
, "data comparators: %i",
1537 (int) (etm
->config
>> 4) & 0x0f);
1538 command_print(CMD_CTX
, "memory map decoders: %i",
1539 (int) (etm
->config
>> 8) & 0x1f);
1540 command_print(CMD_CTX
, "number of counters: %i",
1541 (int) (etm
->config
>> 13) & 0x07);
1542 command_print(CMD_CTX
, "sequencer %spresent",
1543 (int) (etm
->config
& (1 << 16)) ? "" : "not ");
1544 command_print(CMD_CTX
, "number of ext. inputs: %i",
1545 (int) (etm
->config
>> 17) & 0x07);
1546 command_print(CMD_CTX
, "number of ext. outputs: %i",
1547 (int) (etm
->config
>> 20) & 0x07);
1548 command_print(CMD_CTX
, "FIFO full %spresent",
1549 (int) (etm
->config
& (1 << 23)) ? "" : "not ");
1550 if (etm
->bcd_vers
< 0x20)
1551 command_print(CMD_CTX
, "protocol version: %i",
1552 (int) (etm
->config
>> 28) & 0x07);
1554 command_print(CMD_CTX
,
1555 "coprocessor and memory access %ssupported",
1556 (etm
->config
& (1 << 26)) ? "" : "not ");
1557 command_print(CMD_CTX
, "trace start/stop %spresent",
1558 (etm
->config
& (1 << 26)) ? "" : "not ");
1559 command_print(CMD_CTX
, "number of context comparators: %i",
1560 (int) (etm
->config
>> 24) & 0x03);
1563 /* SYS_CONFIG isn't present before ETMv1.2 */
1564 etm_sys_config_reg
= etm_reg_lookup(etm
, ETM_SYS_CONFIG
);
1565 if (!etm_sys_config_reg
)
1568 etm_get_reg(etm_sys_config_reg
);
1569 config
= buf_get_u32(etm_sys_config_reg
->value
, 0, 32);
1571 LOG_DEBUG("ETM SYS CONFIG %08x", (unsigned) config
);
1573 max_port_size
= config
& 0x7;
1574 if (etm
->bcd_vers
>= 0x30)
1575 max_port_size
|= (config
>> 6) & 0x08;
1576 switch (max_port_size
)
1578 /* before ETMv3.0 */
1588 /* ETMv3.0 and later*/
1608 LOG_ERROR("Illegal max_port_size");
1611 command_print(CMD_CTX
, "max. port size: %i", max_port_size
);
1613 if (etm
->bcd_vers
< 0x30) {
1614 command_print(CMD_CTX
, "half-rate clocking %ssupported",
1615 (config
& (1 << 3)) ? "" : "not ");
1616 command_print(CMD_CTX
, "full-rate clocking %ssupported",
1617 (config
& (1 << 4)) ? "" : "not ");
1618 command_print(CMD_CTX
, "normal trace format %ssupported",
1619 (config
& (1 << 5)) ? "" : "not ");
1620 command_print(CMD_CTX
, "multiplex trace format %ssupported",
1621 (config
& (1 << 6)) ? "" : "not ");
1622 command_print(CMD_CTX
, "demultiplex trace format %ssupported",
1623 (config
& (1 << 7)) ? "" : "not ");
1625 /* REVISIT show which size and format are selected ... */
1626 command_print(CMD_CTX
, "current port size %ssupported",
1627 (config
& (1 << 10)) ? "" : "not ");
1628 command_print(CMD_CTX
, "current trace format %ssupported",
1629 (config
& (1 << 11)) ? "" : "not ");
1631 if (etm
->bcd_vers
>= 0x21)
1632 command_print(CMD_CTX
, "fetch comparisons %ssupported",
1633 (config
& (1 << 17)) ? "not " : "");
1634 command_print(CMD_CTX
, "FIFO full %ssupported",
1635 (config
& (1 << 8)) ? "" : "not ");
1640 COMMAND_HANDLER(handle_etm_status_command
)
1642 struct target
*target
;
1644 struct etm_context
*etm
;
1645 trace_status_t trace_status
;
1647 target
= get_current_target(CMD_CTX
);
1648 arm
= target_to_arm(target
);
1651 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1658 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1663 if (etm
->bcd_vers
>= 0x11) {
1666 reg
= etm_reg_lookup(etm
, ETM_STATUS
);
1669 if (etm_get_reg(reg
) == ERROR_OK
) {
1670 unsigned s
= buf_get_u32(reg
->value
, 0, reg
->size
);
1672 command_print(CMD_CTX
, "etm: %s%s%s%s",
1673 /* bit(1) == progbit */
1674 (etm
->bcd_vers
>= 0x12)
1676 ? "disabled" : "enabled")
1678 ((s
& (1 << 3)) && etm
->bcd_vers
>= 0x31)
1679 ? " triggered" : "",
1680 ((s
& (1 << 2)) && etm
->bcd_vers
>= 0x12)
1681 ? " start/stop" : "",
1682 ((s
& (1 << 0)) && etm
->bcd_vers
>= 0x11)
1683 ? " untraced-overflow" : "");
1684 } /* else ignore and try showing trace port status */
1687 /* Trace Port Driver status */
1688 trace_status
= etm
->capture_driver
->status(etm
);
1689 if (trace_status
== TRACE_IDLE
)
1691 command_print(CMD_CTX
, "%s: idle", etm
->capture_driver
->name
);
1695 static char *completed
= " completed";
1696 static char *running
= " is running";
1697 static char *overflowed
= ", overflowed";
1698 static char *triggered
= ", triggered";
1700 command_print(CMD_CTX
, "%s: trace collection%s%s%s",
1701 etm
->capture_driver
->name
,
1702 (trace_status
& TRACE_RUNNING
) ? running
: completed
,
1703 (trace_status
& TRACE_OVERFLOWED
) ? overflowed
: "",
1704 (trace_status
& TRACE_TRIGGERED
) ? triggered
: "");
1706 if (etm
->trace_depth
> 0)
1708 command_print(CMD_CTX
, "%i frames of trace data read",
1709 (int)(etm
->trace_depth
));
1716 COMMAND_HANDLER(handle_etm_image_command
)
1718 struct target
*target
;
1720 struct etm_context
*etm_ctx
;
1724 command_print(CMD_CTX
, "usage: etm image <file> [base address] [type]");
1728 target
= get_current_target(CMD_CTX
);
1729 arm
= target_to_arm(target
);
1732 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1739 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1745 image_close(etm_ctx
->image
);
1746 free(etm_ctx
->image
);
1747 command_print(CMD_CTX
, "previously loaded image found and closed");
1750 etm_ctx
->image
= malloc(sizeof(struct image
));
1751 etm_ctx
->image
->base_address_set
= 0;
1752 etm_ctx
->image
->start_address_set
= 0;
1754 /* a base address isn't always necessary, default to 0x0 (i.e. don't relocate) */
1757 etm_ctx
->image
->base_address_set
= 1;
1758 COMMAND_PARSE_NUMBER(int, CMD_ARGV
[1], etm_ctx
->image
->base_address
);
1762 etm_ctx
->image
->base_address_set
= 0;
1765 if (image_open(etm_ctx
->image
, CMD_ARGV
[0], (CMD_ARGC
>= 3) ? CMD_ARGV
[2] : NULL
) != ERROR_OK
)
1767 free(etm_ctx
->image
);
1768 etm_ctx
->image
= NULL
;
1775 COMMAND_HANDLER(handle_etm_dump_command
)
1778 struct target
*target
;
1780 struct etm_context
*etm_ctx
;
1785 command_print(CMD_CTX
, "usage: etm dump <file>");
1789 target
= get_current_target(CMD_CTX
);
1790 arm
= target_to_arm(target
);
1793 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1800 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1804 if (etm_ctx
->capture_driver
->status
== TRACE_IDLE
)
1806 command_print(CMD_CTX
, "trace capture wasn't enabled, no trace data captured");
1810 if (etm_ctx
->capture_driver
->status(etm_ctx
) & TRACE_RUNNING
)
1812 /* TODO: if on-the-fly capture is to be supported, this needs to be changed */
1813 command_print(CMD_CTX
, "trace capture not completed");
1817 /* read the trace data if it wasn't read already */
1818 if (etm_ctx
->trace_depth
== 0)
1819 etm_ctx
->capture_driver
->read_trace(etm_ctx
);
1821 if (fileio_open(&file
, CMD_ARGV
[0], FILEIO_WRITE
, FILEIO_BINARY
) != ERROR_OK
)
1826 fileio_write_u32(&file
, etm_ctx
->capture_status
);
1827 fileio_write_u32(&file
, etm_ctx
->control
);
1828 fileio_write_u32(&file
, etm_ctx
->tracemode
);
1829 fileio_write_u32(&file
, etm_ctx
->trace_depth
);
1831 for (i
= 0; i
< etm_ctx
->trace_depth
; i
++)
1833 fileio_write_u32(&file
, etm_ctx
->trace_data
[i
].pipestat
);
1834 fileio_write_u32(&file
, etm_ctx
->trace_data
[i
].packet
);
1835 fileio_write_u32(&file
, etm_ctx
->trace_data
[i
].flags
);
1838 fileio_close(&file
);
1843 COMMAND_HANDLER(handle_etm_load_command
)
1846 struct target
*target
;
1848 struct etm_context
*etm_ctx
;
1853 command_print(CMD_CTX
, "usage: etm load <file>");
1857 target
= get_current_target(CMD_CTX
);
1858 arm
= target_to_arm(target
);
1861 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1868 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1872 if (etm_ctx
->capture_driver
->status(etm_ctx
) & TRACE_RUNNING
)
1874 command_print(CMD_CTX
, "trace capture running, stop first");
1878 if (fileio_open(&file
, CMD_ARGV
[0], FILEIO_READ
, FILEIO_BINARY
) != ERROR_OK
)
1885 command_print(CMD_CTX
, "size isn't a multiple of 4, no valid trace data");
1886 fileio_close(&file
);
1890 if (etm_ctx
->trace_depth
> 0)
1892 free(etm_ctx
->trace_data
);
1893 etm_ctx
->trace_data
= NULL
;
1898 fileio_read_u32(&file
, &tmp
); etm_ctx
->capture_status
= tmp
;
1899 fileio_read_u32(&file
, &tmp
); etm_ctx
->control
= tmp
;
1900 fileio_read_u32(&file
, &tmp
); etm_ctx
->tracemode
= tmp
;
1901 fileio_read_u32(&file
, &etm_ctx
->trace_depth
);
1903 etm_ctx
->trace_data
= malloc(sizeof(struct etmv1_trace_data
) * etm_ctx
->trace_depth
);
1904 if (etm_ctx
->trace_data
== NULL
)
1906 command_print(CMD_CTX
, "not enough memory to perform operation");
1907 fileio_close(&file
);
1911 for (i
= 0; i
< etm_ctx
->trace_depth
; i
++)
1913 uint32_t pipestat
, packet
, flags
;
1914 fileio_read_u32(&file
, &pipestat
);
1915 fileio_read_u32(&file
, &packet
);
1916 fileio_read_u32(&file
, &flags
);
1917 etm_ctx
->trace_data
[i
].pipestat
= pipestat
& 0xff;
1918 etm_ctx
->trace_data
[i
].packet
= packet
& 0xffff;
1919 etm_ctx
->trace_data
[i
].flags
= flags
;
1922 fileio_close(&file
);
1927 COMMAND_HANDLER(handle_etm_start_command
)
1929 struct target
*target
;
1931 struct etm_context
*etm_ctx
;
1932 struct reg
*etm_ctrl_reg
;
1934 target
= get_current_target(CMD_CTX
);
1935 arm
= target_to_arm(target
);
1938 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1945 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1949 /* invalidate old tracing data */
1950 etm_ctx
->capture_status
= TRACE_IDLE
;
1951 if (etm_ctx
->trace_depth
> 0)
1953 free(etm_ctx
->trace_data
);
1954 etm_ctx
->trace_data
= NULL
;
1956 etm_ctx
->trace_depth
= 0;
1958 etm_ctrl_reg
= etm_reg_lookup(etm_ctx
, ETM_CTRL
);
1962 etm_get_reg(etm_ctrl_reg
);
1964 /* Clear programming bit (10), set port selection bit (11) */
1965 buf_set_u32(etm_ctrl_reg
->value
, 10, 2, 0x2);
1967 etm_store_reg(etm_ctrl_reg
);
1968 jtag_execute_queue();
1970 etm_ctx
->capture_driver
->start_capture(etm_ctx
);
1975 COMMAND_HANDLER(handle_etm_stop_command
)
1977 struct target
*target
;
1979 struct etm_context
*etm_ctx
;
1980 struct reg
*etm_ctrl_reg
;
1982 target
= get_current_target(CMD_CTX
);
1983 arm
= target_to_arm(target
);
1986 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
1993 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
1997 etm_ctrl_reg
= etm_reg_lookup(etm_ctx
, ETM_CTRL
);
2001 etm_get_reg(etm_ctrl_reg
);
2003 /* Set programming bit (10), clear port selection bit (11) */
2004 buf_set_u32(etm_ctrl_reg
->value
, 10, 2, 0x1);
2006 etm_store_reg(etm_ctrl_reg
);
2007 jtag_execute_queue();
2009 etm_ctx
->capture_driver
->stop_capture(etm_ctx
);
2014 COMMAND_HANDLER(handle_etm_analyze_command
)
2016 struct target
*target
;
2018 struct etm_context
*etm_ctx
;
2021 target
= get_current_target(CMD_CTX
);
2022 arm
= target_to_arm(target
);
2025 command_print(CMD_CTX
, "ETM: current target isn't an ARM");
2032 command_print(CMD_CTX
, "current target doesn't have an ETM configured");
2036 if ((retval
= etmv1_analyze_trace(etm_ctx
, CMD_CTX
)) != ERROR_OK
)
2040 case ERROR_ETM_ANALYSIS_FAILED
:
2041 command_print(CMD_CTX
, "further analysis failed (corrupted trace data or just end of data");
2043 case ERROR_TRACE_INSTRUCTION_UNAVAILABLE
:
2044 command_print(CMD_CTX
, "no instruction for current address available, analysis aborted");
2046 case ERROR_TRACE_IMAGE_UNAVAILABLE
:
2047 command_print(CMD_CTX
, "no image available for trace analysis");
2050 command_print(CMD_CTX
, "unknown error: %i", retval
);
2057 static const struct command_registration etm_config_command_handlers
[] = {
2060 .handler
= &handle_etm_config_command
,
2061 .mode
= COMMAND_CONFIG
,
2062 .usage
= "<target> <port_width> <port_mode> "
2063 "<clocking> <capture_driver>",
2065 COMMAND_REGISTRATION_DONE
2067 const struct command_registration etm_command_handlers
[] = {
2070 .mode
= COMMAND_ANY
,
2071 .help
= "Emebdded Trace Macrocell command group",
2072 .chain
= etm_config_command_handlers
,
2074 COMMAND_REGISTRATION_DONE
2077 static const struct command_registration etm_exec_command_handlers
[] = {
2079 .name
= "tracemode", handle_etm_tracemode_command
,
2080 .mode
= COMMAND_EXEC
,
2081 .help
= "configure/display trace mode",
2082 .usage
= "<none | data | address | all> "
2083 "<context_id_bits> <cycle_accurate> <branch_output>",
2087 .handler
= &handle_etm_info_command
,
2088 .mode
= COMMAND_EXEC
,
2089 .help
= "display info about the current target's ETM",
2093 .handler
= &handle_etm_status_command
,
2094 .mode
= COMMAND_EXEC
,
2095 .help
= "display current target's ETM status",
2099 .handler
= &handle_etm_start_command
,
2100 .mode
= COMMAND_EXEC
,
2101 .help
= "start ETM trace collection",
2105 .handler
= &handle_etm_stop_command
,
2106 .mode
= COMMAND_EXEC
,
2107 .help
= "stop ETM trace collection",
2111 .handler
= &handle_etm_analyze_command
,
2112 .mode
= COMMAND_EXEC
,
2113 .help
= "anaylze collected ETM trace",
2117 .handler
= &handle_etm_image_command
,
2118 .mode
= COMMAND_EXEC
,
2119 .help
= "load image from <file> [base address]",
2123 .handler
= &handle_etm_dump_command
,
2124 .mode
= COMMAND_EXEC
,
2125 .help
= "dump captured trace data <file>",
2129 .handler
= &handle_etm_load_command
,
2130 .mode
= COMMAND_EXEC
,
2131 .help
= "load trace data for analysis <file>",
2133 COMMAND_REGISTRATION_DONE
2136 static int etm_register_user_commands(struct command_context
*cmd_ctx
)
2138 struct command
*etm_cmd
= command_find_in_context(cmd_ctx
, "etm");
2139 return register_commands(cmd_ctx
, etm_cmd
, etm_exec_command_handlers
);
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)