2 * Copyright(c) 2013 Intel Corporation.
4 * Adrian Burns (adrian.burns@intel.com)
5 * Thomas Faust (thomas.faust@intel.com)
6 * Ivan De Cesaris (ivan.de.cesaris@intel.com)
7 * Julien Carreno (julien.carreno@intel.com)
8 * Jeffrey Maxwell (jeffrey.r.maxwell@intel.com)
10 * This program is free software; you can redistribute it and/or modify
11 * it under the terms of the GNU General Public License as published by
12 * the Free Software Foundation; either version 2 of the License, or
13 * (at your option) any later version.
15 * This program is distributed in the hope that it will be useful, but
16 * WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
18 * General Public License for more details.
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
24 * Contact Information:
30 * This is the interface to the x86 32 bit memory and breakpoint operations.
33 #ifndef X86_32_COMMON_H
34 #define X86_32_COMMON_H
36 #include <jtag/jtag.h>
37 #include <helper/command.h>
38 #include <helper/types.h>
40 extern const struct command_registration x86_32_command_handlers
[];
42 /* for memory access */
47 #define EFLAGS_TF ((uint32_t)0x00000100) /* Trap Flag */
48 #define EFLAGS_IF ((uint32_t)0x00000200) /* Interrupt Flag */
49 #define EFLAGS_RF ((uint32_t)0x00010000) /* Resume Flag */
50 #define EFLAGS_VM86 ((uint32_t)0x00020000) /* Virtual 8086 Mode */
52 #define CSAR_DPL ((uint32_t)0x00006000)
53 #define CSAR_D ((uint32_t)0x00400000)
54 #define SSAR_DPL ((uint32_t)0x00006000)
56 #define CR0_PE ((uint32_t)0x00000001) /* Protected Mode Enable */
57 #define CR0_NW ((uint32_t)0x20000000) /* Non Write-Through */
58 #define CR0_CD ((uint32_t)0x40000000) /* Cache Disable */
59 #define CR0_PG ((uint32_t)0x80000000) /* Paging Enable */
61 /* TODO - move back to PM specific file */
62 #define PM_DR6 ((uint32_t)0xFFFF0FF0)
64 #define DR6_BRKDETECT_0 ((uint32_t)0x00000001) /* B0 through B3 */
65 #define DR6_BRKDETECT_1 ((uint32_t)0x00000002) /* breakpoint condition detected */
66 #define DR6_BRKDETECT_2 ((uint32_t)0x00000004)
67 #define DR6_BRKDETECT_3 ((uint32_t)0x00000008)
70 /* general purpose registers */
79 /* instruction pointer & flags */
83 /* segment registers */
91 /* floating point unit registers */
109 /* control registers */
115 /* debug registers */
123 /* descriptor tables */
136 /* segment registers */
163 #define X86_32_COMMON_MAGIC 0x86328632
166 /* memory read/write */
192 /* lakemont1 core shadow ram access opcodes */
199 struct swbp_mem_patch
{
201 uint32_t swbp_unique_id
;
203 struct swbp_mem_patch
*next
;
206 /* TODO - probemode specific - consider removing */
207 #define NUM_PM_REGS 18 /* regs used in save/restore */
209 struct x86_32_common
{
210 uint32_t common_magic
;
212 struct reg_cache
*cache
;
213 struct jtag_tap
*curr_tap
;
217 /* pm_regs are for probemode save/restore state */
218 uint32_t pm_regs
[NUM_PM_REGS
];
220 /* working area for fastdata access */
221 struct working_area
*fast_data_area
;
224 struct x86_32_dbg_reg
*hw_break_list
;
225 struct swbp_mem_patch
*swbbp_mem_patch_list
;
227 /* core probemode implementation dependent functions */
228 uint8_t (*get_num_user_regs
)(struct target
*t
);
229 bool (*is_paging_enabled
)(struct target
*t
);
230 int (*disable_paging
)(struct target
*t
);
231 int (*enable_paging
)(struct target
*t
);
232 bool (*sw_bpts_supported
)(struct target
*t
);
233 int (*transaction_status
)(struct target
*t
);
234 int (*submit_instruction
)(struct target
*t
, int num
);
235 int (*read_hw_reg
)(struct target
*t
, int reg
, uint32_t *regval
, uint8_t cache
);
236 int (*write_hw_reg
)(struct target
*t
, int reg
,
237 uint32_t regval
, uint8_t cache
);
239 /* register cache to processor synchronization */
240 int (*read_hw_reg_to_cache
)(struct target
*target
, int num
);
241 int (*write_hw_reg_from_cache
)(struct target
*target
, int num
);
244 static inline struct x86_32_common
*
245 target_to_x86_32(struct target
*target
)
247 return target
->arch_info
;
249 bool check_not_halted(const struct target
*t
);
251 /* breakpoint defines */
252 #define MAX_DEBUG_REGS 4
253 #define SW_BP_OPCODE 0xf1
254 #define MAX_SW_BPTS 20
256 struct x86_32_dbg_reg
{
261 #define DR7_G_ENABLE_SHIFT 1
262 #define DR7_ENABLE_SIZE 2 /* 2 bits per debug reg */
263 #define DR7_RW_SHIFT 16
264 #define DR7_LENGTH_SHIFT 18
265 #define DR7_RW_LEN_SIZE 4
266 #define DR7_BP_EXECUTE 0 /* 00 - only on instruction execution*/
267 #define DR7_BP_WRITE 1 /* 01 - only on data writes */
268 /*#define DR7_RW_IORW 2 UNSUPPORTED 10 - an I/O read and I/O write */
269 #define DR7_BP_READWRITE 3 /* on data read or data write */
270 #define DR7_BP_LENGTH_1 0 /* 00 - 1 byte length */
271 #define DR7_BP_LENGTH_2 1 /* 01 - 2 byte length */
272 #define DR7_BP_LENGTH_4 3 /* 11 - 4 byte length */
274 #define DR7_GLOBAL_ENABLE(val, regnum) \
275 (val |= (1 << (DR7_G_ENABLE_SHIFT + (DR7_ENABLE_SIZE * (regnum)))))
277 #define DR7_GLOBAL_DISABLE(val, regnum) \
278 (val &= ~(3 << (DR7_ENABLE_SIZE * (regnum))))
280 #define DR7_BP_FREE(val, regnum) \
281 ((val & (3 << (DR7_ENABLE_SIZE * (regnum)))) == 0)
283 #define DR7_RESET_RWLEN_BITS(val, regnum) \
284 (val &= ~(0x0f << (DR7_RW_SHIFT + DR7_RW_LEN_SIZE * (regnum))))
286 #define DR7_SET_EXE(val, regnum) \
287 (val &= ~(0x0f << (DR7_RW_SHIFT + DR7_RW_LEN_SIZE * (regnum))))
289 #define DR7_SET_WRITE(val, regnum) \
290 (val |= (DR7_BP_WRITE << (DR7_RW_SHIFT + DR7_RW_LEN_SIZE * (regnum))))
292 #define DR7_SET_ACCESS(val, regnum) \
293 (val |= (DR7_BP_READWRITE << (DR7_RW_SHIFT + DR7_RW_LEN_SIZE * (regnum))))
295 #define DR7_SET_LENGTH(val, regnum, len) \
296 (val |= (len == 1) ? (DR7_BP_LENGTH_1 << (DR7_LENGTH_SHIFT + DR7_RW_LEN_SIZE * (regnum))) : \
297 (len == 2) ? (DR7_BP_LENGTH_2 << (DR7_LENGTH_SHIFT + DR7_RW_LEN_SIZE * (regnum))) : \
298 (DR7_BP_LENGTH_4 << (DR7_LENGTH_SHIFT + DR7_RW_LEN_SIZE * (regnum))))
300 /* public interface */
301 int x86_32_get_gdb_reg_list(struct target
*t
,
302 struct reg
**reg_list
[], int *reg_list_size
,
303 enum target_register_class reg_class
);
304 int x86_32_common_init_arch_info(struct target
*target
,
305 struct x86_32_common
*x86_32
);
306 int x86_32_common_mmu(struct target
*t
, int *enabled
);
307 int x86_32_common_virt2phys(struct target
*t
, uint32_t address
, uint32_t *physical
);
308 int x86_32_common_read_phys_mem(struct target
*t
, uint32_t phys_address
,
309 uint32_t size
, uint32_t count
, uint8_t *buffer
);
310 int x86_32_common_write_phys_mem(struct target
*t
, uint32_t phys_address
,
311 uint32_t size
, uint32_t count
, const uint8_t *buffer
);
312 int x86_32_common_read_memory(struct target
*t
, uint32_t addr
,
313 uint32_t size
, uint32_t count
, uint8_t *buf
);
314 int x86_32_common_write_memory(struct target
*t
, uint32_t addr
,
315 uint32_t size
, uint32_t count
, const uint8_t *buf
);
316 int x86_32_common_read_io(struct target
*t
, uint32_t addr
,
317 uint32_t size
, uint8_t *buf
);
318 int x86_32_common_write_io(struct target
*t
, uint32_t addr
,
319 uint32_t size
, const uint8_t *buf
);
320 int x86_32_common_add_breakpoint(struct target
*t
, struct breakpoint
*bp
);
321 int x86_32_common_remove_breakpoint(struct target
*t
, struct breakpoint
*bp
);
322 int x86_32_common_add_watchpoint(struct target
*t
, struct watchpoint
*wp
);
323 int x86_32_common_remove_watchpoint(struct target
*t
, struct watchpoint
*wp
);
325 #endif /* X86_32_COMMON_H */
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)