2 # http://www.hitex.com/index.php?id=383
3 # This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2.
5 source [find interface/ftdi/hitex_str9-comstick.cfg]
10 adapter srst delay 100
12 #use combined on interfaces or targets that can't set TRST/SRST separately
13 reset_config trst_and_srst
16 # FIXME use the standard str912 target config; that script might need
17 # updating to "-ignore-version" for the boundary scan TAP
19 # source [find target/str912.cfg]
22 if { [info exists CHIPNAME] } {
23 set _CHIPNAME $CHIPNAME
28 if { [info exists ENDIAN] } {
34 if { [info exists FLASHTAPID] } {
35 set _FLASHTAPID $FLASHTAPID
37 set _FLASHTAPID 0x04570041
39 jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
41 if { [info exists CPUTAPID] } {
42 set _CPUTAPID $CPUTAPID
44 set _CPUTAPID 0x25966041
46 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
48 if { [info exists BSTAPID] } {
51 # Found on STR9-comStick, revision STR912CS-A1
52 set _BSTAPID1 0x1457f041
53 # Found on STR9-comStick, revision STR912CS-A2
54 set _BSTAPID2 0x2457f041
56 jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
58 set _TARGETNAME $_CHIPNAME.cpu
59 target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME
61 $_TARGETNAME configure -event reset-init {
62 # We can increase speed now that we know the target is halted.
66 # PFQBC enabled / DTCM & AHB wait-states disabled
69 str9x flash_config 0 4 2 0 0x80000
70 flash protect 0 0 7 off
73 $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
75 #flash bank <driver> <base> <size> <chip_width> <bus_width>
76 set _FLASHNAME $_CHIPNAME.flash0
77 flash bank $_FLASHNAME str9x 0x00000000 0x00080000 0 0 0
78 set _FLASHNAME $_CHIPNAME.flash1
79 flash bank $_FLASHNAME str9x 0x00080000 0x00008000 0 0 0
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)