2 # http://www.hitex.com/index.php?id=383
3 # This works for the STR9-comStick revisions STR912CS-A1 and STR912CS-A2.
5 source [find interface/hitex_str9-comstick.cfg]
12 #use combined on interfaces or targets that can't set TRST/SRST separately
13 reset_config trst_and_srst
15 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
17 if { [info exists CHIPNAME] } {
18 set _CHIPNAME $CHIPNAME
23 if { [info exists ENDIAN] } {
29 if { [info exists FLASHTAPID ] } {
30 set _FLASHTAPID $FLASHTAPID
32 set _FLASHTAPID 0x04570041
34 jtag newtap $_CHIPNAME flash -irlen 8 -ircapture 0x1 -irmask 0x1 -expected-id $_FLASHTAPID
36 if { [info exists CPUTAPID ] } {
37 set _CPUTAPID $CPUTAPID
39 set _CPUTAPID 0x25966041
41 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
43 if { [info exists BSTAPID ] } {
46 # Found on STR9-comStick, revision STR912CS-A1
47 set _BSTAPID1 0x1457f041
48 # Found on STR9-comStick, revision STR912CS-A2
49 set _BSTAPID2 0x2457f041
51 jtag newtap $_CHIPNAME bs -irlen 5 -ircapture 0x1 -irmask 0x1 -expected-id $_BSTAPID1 -expected-id $_BSTAPID2
53 set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
54 target create $_TARGETNAME arm966e -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm966e
56 $_TARGETNAME configure -event reset-init {
57 # We can increase speed now that we know the target is halted.
61 # PFQBC enabled / DTCM & AHB wait-states disabled
64 str9x flash_config 0 4 2 0 0x80000
65 flash protect 0 0 7 off
68 $_TARGETNAME configure -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup 0
70 #flash bank <driver> <base> <size> <chip_width> <bus_width>
71 flash bank str9x 0x00000000 0x00080000 0 0 0
72 flash bank str9x 0x00080000 0x00008000 0 0 0
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)