1 # script for ATMEL sam3, a CORTEX-M3 chip
20 if { [info exists CHIPNAME] } {
21 set _CHIPNAME $CHIPNAME
26 if { [info exists ENDIAN] } {
32 # JTAG speed should be <= F_CPU/6. F_CPU after reset is 4 MHz, so use F_JTAG = 0.5MHz
34 # Since we may be running of an RC oscilator, we crank down the speed a
35 # bit more to be on the safe side. Perhaps superstition, but if are
36 # running off a crystal, we can run closer to the limit. Note
37 # that there can be a pretty wide band where things are more or less stable.
41 adapter_nsrst_delay 100
45 if { [info exists CPUTAPID] } {
46 set _CPUTAPID $CPUTAPID
48 set _CPUTAPID 0x4ba00477
51 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
53 set _TARGETNAME $_CHIPNAME.cpu
54 target create $_TARGETNAME cortex_m3 -endian $_ENDIAN -chain-position $_TARGETNAME
56 # 16K is plenty, the smallest chip has this much
57 $_TARGETNAME configure -work-area-phys 0x20000000 -work-area-size 16384 -work-area-backup 0
59 $_TARGETNAME configure -event gdb-flash-erase-start {
Linking to existing account procedure
If you already have an account and want to add another login method
you
MUST first sign in with your existing account and
then change URL to read
https://review.openocd.org/login/?link
to get to this page again but this time it'll work for linking. Thank you.
SSH host keys fingerprints
1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=.. |
|+o.. . |
|*.o . . |
|+B . . . |
|Bo. = o S |
|Oo.+ + = |
|oB=.* = . o |
| =+=.+ + E |
|. .=o . o |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)