+int axm0432_jtag_init(void)
+{
+ u8 buf[3];
+ u32 bytes_written;
+
+ low_output = 0x08;
+ low_direction = 0x2b;
+
+ /* initialize low byte for jtag */
+ buf[0] = 0x80; /* command "set data bits low byte" */
+ buf[1] = low_output; /* value (TMS=1,TCK=0, TDI=0, nOE=0) */
+ buf[2] = low_direction; /* dir (output=1), TCK/TDI/TMS=out, TDO=in, nOE=out */
+ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ LOG_ERROR("couldn't initialize FT2232 with 'JTAGkey' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ if (strcmp(layout->name, "axm0432_jtag") == 0)
+ {
+ nTRST = 0x08;
+ nTRSTnOE = 0x0; /* No output enable for TRST*/
+ nSRST = 0x04;
+ nSRSTnOE = 0x0; /* No output enable for SRST*/
+ }
+ else
+ {
+ LOG_ERROR("BUG: axm0432_jtag_init called for non axm0432 layout");
+ exit(-1);
+ }
+
+ high_output = 0x0;
+ high_direction = 0x0c;
+
+ if (jtag_reset_config & RESET_TRST_OPEN_DRAIN)
+ {
+ LOG_ERROR("can't set nTRSTOE to push-pull on the Dicarlo jtag");
+ }
+ else
+ {
+ high_output |= nTRST;
+ }
+
+ if (jtag_reset_config & RESET_SRST_PUSH_PULL)
+ {
+ LOG_ERROR("can't set nSRST to push-pull on the Dicarlo jtag");
+ }
+ else
+ {
+ high_output |= nSRST;
+ }
+
+ /* initialize high port */
+ buf[0] = 0x82; /* command "set data bits high byte" */
+ buf[1] = high_output; /* value */
+ buf[2] = high_direction; /* all outputs (xRST and xRSTnOE) */
+ LOG_DEBUG("%2.2x %2.2x %2.2x", buf[0], buf[1], buf[2]);
+
+ if (((ft2232_write(buf, 3, &bytes_written)) != ERROR_OK) || (bytes_written != 3))
+ {
+ LOG_ERROR("couldn't initialize FT2232 with 'Dicarlo' layout");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
+ return ERROR_OK;
+}
+