-/**
- * Scan DPACC or APACC using target ordered uint8_t buffers. No endianness
- * conversions are performed. See section 4.4.3 of the ADIv5 spec, which
- * discusses operations which access these registers.
- *
- * Note that only one scan is performed. If RnW is set, a separate scan
- * will be needed to collect the data which was read; the "invalue" collects
- * the posted result of a preceding operation, not the current one.
- *
- * @param swjdp the DAP
- * @param instr JTAG_DP_APACC (AP access) or JTAG_DP_DPACC (DP access)
- * @param reg_addr two significant bits; A[3:2]; for APACC access, the
- * SELECT register has more addressing bits.
- * @param RnW false iff outvalue will be written to the DP or AP
- * @param outvalue points to a 32-bit (little-endian) integer
- * @param invalue NULL, or points to a 32-bit (little-endian) integer
- * @param ack points to where the three bit JTAG_ACK_* code will be stored
- */
-static int adi_jtag_dp_scan(struct swjdp_common *swjdp,
- uint8_t instr, uint8_t reg_addr, uint8_t RnW,
- uint8_t *outvalue, uint8_t *invalue, uint8_t *ack)
-{
- struct arm_jtag *jtag_info = swjdp->jtag_info;
- struct scan_field fields[2];
- uint8_t out_addr_buf;
-
- jtag_set_end_state(TAP_IDLE);
- arm_jtag_set_instr(jtag_info, instr, NULL);
-
- /* Scan out a read or write operation using some DP or AP register.
- * For APACC access with any sticky error flag set, this is discarded.
- */
- fields[0].tap = jtag_info->tap;
- fields[0].num_bits = 3;
- buf_set_u32(&out_addr_buf, 0, 3, ((reg_addr >> 1) & 0x6) | (RnW & 0x1));
- fields[0].out_value = &out_addr_buf;
- fields[0].in_value = ack;
-
- /* NOTE: if we receive JTAG_ACK_WAIT, the previous operation did not
- * complete; data we write is discarded, data we read is unpredictable.
- * When overrun detect is active, STICKYORUN is set.
- */
-
- fields[1].tap = jtag_info->tap;
- fields[1].num_bits = 32;
- fields[1].out_value = outvalue;
- fields[1].in_value = invalue;
-
- jtag_add_dr_scan(2, fields, jtag_get_end_state());
-
- /* Add specified number of tck clocks after starting memory bus
- * access, giving the hardware time to complete the access.
- * They provide more time for the (MEM) AP to complete the read ...
- * See "Minimum Response Time" for JTAG-DP, in the ADIv5 spec.
- */
- if ((instr == JTAG_DP_APACC)
- && ((reg_addr == AP_REG_DRW)
- || ((reg_addr & 0xF0) == AP_REG_BD0))
- && (swjdp->memaccess_tck != 0))
- jtag_add_runtest(swjdp->memaccess_tck,
- jtag_set_end_state(TAP_IDLE));
-
- return jtag_get_error();
-}
-
-/**
- * Scan DPACC or APACC out and in from host ordered uint32_t buffers.
- * This is exactly like adi_jtag_dp_scan(), except that endianness
- * conversions are performed (so the types of invalue and outvalue
- * must be different).
- */
-static int adi_jtag_dp_scan_u32(struct swjdp_common *swjdp,
- uint8_t instr, uint8_t reg_addr, uint8_t RnW,
- uint32_t outvalue, uint32_t *invalue, uint8_t *ack)
-{
- uint8_t out_value_buf[4];
- int retval;
-
- buf_set_u32(out_value_buf, 0, 32, outvalue);
-
- retval = adi_jtag_dp_scan(swjdp, instr, reg_addr, RnW,
- out_value_buf, (uint8_t *)invalue, ack);
- if (retval != ERROR_OK)
- return retval;
-
- if (invalue)
- jtag_add_callback(arm_le_to_h_u32,
- (jtag_callback_data_t) invalue);
-
- return retval;
-}
-
-/**
- * Utility to write AP registers.
- */
-static inline int adi_jtag_ap_write_check(struct swjdp_common *dap,
- uint8_t reg_addr, uint8_t *outvalue)
-{
- return adi_jtag_dp_scan(dap, JTAG_DP_APACC, reg_addr, DPAP_WRITE,
- outvalue, NULL, NULL);
-}
-
-static int adi_jtag_scan_inout_check_u32(struct swjdp_common *swjdp,
- uint8_t instr, uint8_t reg_addr, uint8_t RnW,
- uint32_t outvalue, uint32_t *invalue)
-{
- int retval;
-
- /* Issue the read or write */
- retval = adi_jtag_dp_scan_u32(swjdp, instr, reg_addr,
- RnW, outvalue, NULL, NULL);
- if (retval != ERROR_OK)
- return retval;
-
- /* For reads, collect posted value; RDBUFF has no other effect.
- * Assumes read gets acked with OK/FAULT, and CTRL_STAT says "OK".
- */
- if ((RnW == DPAP_READ) && (invalue != NULL))
- retval = adi_jtag_dp_scan_u32(swjdp, JTAG_DP_DPACC,
- DP_RDBUFF, DPAP_READ, 0, invalue, &swjdp->ack);
- return retval;
-}
-
-static int jtagdp_transaction_endcheck(struct swjdp_common *swjdp)