@* A JTAG driver acting as a client for the JTAG VPI server interface.
@* Link: @url{http://github.com/fjullien/jtag_vpi}
+@item @b{jtag_dpi}
+@* A JTAG driver acting as a client for the SystemVerilog Direct Programming
+Interface (DPI) for JTAG devices. DPI allows OpenOCD to connect to the JTAG
+interface of a hardware model written in SystemVerilog, for example, on an
+emulation model of target hardware.
+
@item @b{xlnx_pcie_xvc}
@* A JTAG driver exposing Xilinx Virtual Cable over PCI Express to OpenOCD as JTAG/SWD interface.
@item the current directory,
@item any search dir specified on the command line using the @option{-s} option,
@item any search dir specified using the @command{add_script_search_dir} command,
-@item @file{$HOME/.openocd} (not on Windows),
@item a directory in the @env{OPENOCD_SCRIPTS} environment variable (if set),
+@item @file{%APPDATA%/OpenOCD} (only on Windows),
+@item @file{$HOME/Library/Preferences/org.openocd} (only on Darwin),
+@item @file{$XDG_CONFIG_HOME/openocd} (@env{$XDG_CONFIG_HOME} defaults to @file{$HOME/.config}),
+@item @file{$HOME/.openocd},
@item the site wide script library @file{$pkgdatadir/site} and
@item the OpenOCD-supplied script library @file{$pkgdatadir/scripts}.
@end enumerate
@end deffn
@end deffn
+
+@deffn {Interface Driver} {jtag_dpi}
+SystemVerilog Direct Programming Interface (DPI) compatible driver for
+JTAG devices in emulation. The driver acts as a client for the SystemVerilog
+DPI server interface.
+
+@deffn {Config Command} {jtag_dpi_set_port} port
+Specifies the TCP/IP port number of the SystemVerilog DPI server interface.
+@end deffn
+
+@deffn {Config Command} {jtag_dpi_set_address} address
+Specifies the TCP/IP address of the SystemVerilog DPI server interface.
+@end deffn
+@end deffn
+
+
@section Transport Configuration
@cindex Transport
As noted earlier, depending on the version of OpenOCD you use,
@end deffn
@deffn Command {riscv set_prefer_sba} on|off
-When on, prefer to use System Bus Access to access memory. When off, prefer to
-use the Program Buffer to access memory.
+When on, prefer to use System Bus Access to access memory. When off (default),
+prefer to use the Program Buffer to access memory.
+@end deffn
+
+@deffn Command {riscv set_enable_virtual} on|off
+When on, memory accesses are performed on physical or virtual memory depending
+on the current system configuration. When off (default), all memory accessses are performed
+on physical memory.
+@end deffn
+
+@deffn Command {riscv set_enable_virt2phys} on|off
+When on (default), memory accesses are performed on physical or virtual memory
+depending on the current satp configuration. When off, all memory accessses are
+performed on physical memory.
+@end deffn
+
+@deffn Command {riscv resume_order} normal|reversed
+Some software assumes all harts are executing nearly continuously. Such
+software may be sensitive to the order that harts are resumed in. On harts
+that don't support hasel, this option allows the user to choose the order the
+harts are resumed in. If you are using this option, it's probably masking a
+race condition problem in your code.
+
+Normal order is from lowest hart index to highest. This is the default
+behavior. Reversed order is from highest hart index to lowest.
@end deffn
@deffn Command {riscv set_ir} (@option{idcode}|@option{dtmcs}|@option{dmi}) [value]
and DBUS registers, respectively.
@end deffn
+@deffn Command {riscv use_bscan_tunnel} value
+Enable or disable use of a BSCAN tunnel to reach DM. Supply the width of
+the DM transport TAP's instruction register to enable. Supply a value of 0 to disable.
+@end deffn
+
+@deffn Command {riscv set_ebreakm} on|off
+Control dcsr.ebreakm. When on (default), M-mode ebreak instructions trap to
+OpenOCD. When off, they generate a breakpoint exception handled internally.
+@end deffn
+
+@deffn Command {riscv set_ebreaks} on|off
+Control dcsr.ebreaks. When on (default), S-mode ebreak instructions trap to
+OpenOCD. When off, they generate a breakpoint exception handled internally.
+@end deffn
+
+@deffn Command {riscv set_ebreaku} on|off
+Control dcsr.ebreaku. When on (default), U-mode ebreak instructions trap to
+OpenOCD. When off, they generate a breakpoint exception handled internally.
+@end deffn
+
@subsection RISC-V Authentication Commands
The following commands can be used to authenticate to a RISC-V system. Eg. a
The following commands allow direct access to the Debug Module Interface, which
can be used to interact with custom debug features.
-@deffn Command {riscv dmi_read}
+@deffn Command {riscv dmi_read} address
Perform a 32-bit DMI read at address, returning the value.
@end deffn