Code Review / openocd.git / blobdiff
? search:
summary | shortlog | log | commit | commitdiff | review | tree
raw | inline | side by side
doc: usb_adapters: add lsusb dump of few adapters
[openocd.git] / doc / usb_adapters / stlink / 0483_374b_stlinkv2.txt
diff --git a/doc/usb_adapters/stlink/0483_374b_stlinkv2.txt b/doc/usb_adapters/stlink/0483_374b_stlinkv2.txt
new file mode 100644 (file)
index 0000000..cc0156d
--- /dev/null
+++ b/doc/usb_adapters/stlink/0483_374b_stlinkv2.txt
@@ -0,0 +1,173 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR GFDL-1.2-no-invariants-or-later
+
+# Board: ST Nucleo F411
+
+Bus 001 Device 007: ID 0483:374b STMicroelectronics ST-LINK/V2.1
+Device Descriptor:
+  bLength                18
+  bDescriptorType         1
+  bcdUSB               2.00
+  bDeviceClass          239 Miscellaneous Device
+  bDeviceSubClass         2
+  bDeviceProtocol         1 Interface Association
+  bMaxPacketSize0        64
+  idVendor           0x0483 STMicroelectronics
+  idProduct          0x374b ST-LINK/V2.1
+  bcdDevice            1.00
+  iManufacturer           1 STMicroelectronics
+  iProduct                2 STM32 STLink
+  iSerial                 3 066EFF373535503457062922
+  bNumConfigurations      1
+  Configuration Descriptor:
+    bLength                 9
+    bDescriptorType         2
+    wTotalLength       0x0080
+    bNumInterfaces          4
+    bConfigurationValue     1
+    iConfiguration          0
+    bmAttributes         0x80
+      (Bus Powered)
+    MaxPower              100mA
+    Interface Descriptor:
+      bLength                 9
+      bDescriptorType         4
+      bInterfaceNumber        0
+      bAlternateSetting       0
+      bNumEndpoints           3
+      bInterfaceClass       255 Vendor Specific Class
+      bInterfaceSubClass    255 Vendor Specific Subclass
+      bInterfaceProtocol    255 Vendor Specific Protocol
+      iInterface              4 ST-Link Debug
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x81  EP 1 IN
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               0
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x01  EP 1 OUT
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               0
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x82  EP 2 IN
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0020  1x 32 bytes
+        bInterval               0
+    Interface Descriptor:
+      bLength                 9
+      bDescriptorType         4
+      bInterfaceNumber        1
+      bAlternateSetting       0
+      bNumEndpoints           2
+      bInterfaceClass         8 Mass Storage
+      bInterfaceSubClass      6 SCSI
+      bInterfaceProtocol     80 Bulk-Only
+      iInterface              5 ST-Link mass storage
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x83  EP 3 IN
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               0
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x03  EP 3 OUT
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0040  1x 64 bytes
+        bInterval               0
+    Interface Association:
+      bLength                 8
+      bDescriptorType        11
+      bFirstInterface         2
+      bInterfaceCount         2
+      bFunctionClass          2 Communications
+      bFunctionSubClass       2 Abstract (modem)
+      bFunctionProtocol       1 AT-commands (v.25ter)
+      iFunction               6 ST-Link VCP Ctrl
+    Interface Descriptor:
+      bLength                 9
+      bDescriptorType         4
+      bInterfaceNumber        2
+      bAlternateSetting       0
+      bNumEndpoints           1
+      bInterfaceClass         2 Communications
+      bInterfaceSubClass      2 Abstract (modem)
+      bInterfaceProtocol      1 AT-commands (v.25ter)
+      iInterface              6 ST-Link VCP Ctrl
+      CDC Header:
+        bcdCDC               1.10
+      CDC Call Management:
+        bmCapabilities       0x00
+        bDataInterface          3
+      CDC ACM:
+        bmCapabilities       0x06
+          sends break
+          line coding and serial state
+      CDC Union:
+        bMasterInterface        2
+        bSlaveInterface         3
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x84  EP 4 IN
+        bmAttributes            3
+          Transfer Type            Interrupt
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0002  1x 2 bytes
+        bInterval             255
+    Interface Descriptor:
+      bLength                 9
+      bDescriptorType         4
+      bInterfaceNumber        3
+      bAlternateSetting       0
+      bNumEndpoints           2
+      bInterfaceClass        10 CDC Data
+      bInterfaceSubClass      0
+      bInterfaceProtocol      0
+      iInterface              7 ST-Link VCP Data
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x05  EP 5 OUT
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0008  1x 8 bytes
+        bInterval               0
+      Endpoint Descriptor:
+        bLength                 7
+        bDescriptorType         5
+        bEndpointAddress     0x85  EP 5 IN
+        bmAttributes            2
+          Transfer Type            Bulk
+          Synch Type               None
+          Usage Type               Data
+        wMaxPacketSize     0x0010  1x 16 bytes
+        bInterval               0
+Device Status:     0x0000
+  (Bus Powered)
Open On-Chip Debugger

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)