Remove whitespace at end of lines, step 1.

[openocd.git] / src / flash / lpc2000.c

diff --git a/src/flash/lpc2000.c b/src/flash/lpc2000.c
index 60a3ad660975dabad9f4dde86e4e21efc08c0f73..106c2bad32827abbeb122e8df5988508136aa0e7 100644 (file)
--- a/src/flash/lpc2000.c
+++ b/src/flash/lpc2000.c
@@ -30,18 +30,18 @@
 /* flash programming support for Philips LPC2xxx devices
  * currently supported devices:
  * variant 1 (lpc2000_v1):
- * - 2104|5|6
- * - 2114|9
- * - 2124|9
+ * - 2104 | 5|6
+ * - 2114 | 9
+ * - 2124 | 9
  * - 2194
- * - 2212|4
- * - 2292|4
+ * - 2212 | 4
+ * - 2292 | 4
  *
  * variant 2 (lpc2000_v2):
  * - 213x
  * - 214x
- * - 2101|2|3
- * - 2364|6|8
+ * - 2101 | 2|3
+ * - 2364 | 6|8
  * - 2378
  */
 
@@ -258,7 +258,7 @@ static int lpc2000_iap_call(flash_bank_t *bank, int code, uint32_t param_table[5
                /* write IAP code to working area */
                target_buffer_set_u32(target, jump_gate, ARMV4_5_BX(12));
                target_buffer_set_u32(target, jump_gate + 4, ARMV4_5_B(0xfffffe, 0));
-               if((retval = target_write_memory(target, lpc2000_info->iap_working_area->address, 4, 2, jump_gate)) != ERROR_OK)
+               if ((retval = target_write_memory(target, lpc2000_info->iap_working_area->address, 4, 2, jump_gate)) != ERROR_OK)
                {
                        return retval;
                }
@@ -497,7 +497,7 @@ static int lpc2000_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t of
 
        if (offset % dst_min_alignment)
        {
-               LOG_WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);
+               LOG_WARNING("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32, offset, dst_min_alignment);
                return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
        }
 
@@ -518,17 +518,17 @@ static int lpc2000_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t of
                int i = 0;
                for (i = 0; i < 8; i++)
                {
-                       LOG_DEBUG("0x%2.2x: 0x%8.8x", i * 4, buf_get_u32(buffer + (i * 4), 0, 32));
+                       LOG_DEBUG("0x%2.2x: 0x%8.8" PRIx32, i * 4, buf_get_u32(buffer + (i * 4), 0, 32));
                        if (i != 5)
                                checksum += buf_get_u32(buffer + (i * 4), 0, 32);
                }
                checksum = 0 - checksum;
-               LOG_DEBUG("checksum: 0x%8.8x", checksum);
+               LOG_DEBUG("checksum: 0x%8.8" PRIx32, checksum);
 
-               uint32_t original_value=buf_get_u32(buffer + (5 * 4), 0, 32);
-               if (original_value!=checksum)
+               uint32_t original_value = buf_get_u32(buffer + (5 * 4), 0, 32);
+               if (original_value != checksum)
                {
-                       LOG_WARNING("Verification will fail since checksum in image(0x%8.8x) written to flash was different from calculated vector checksum(0x%8.8x).",
+                       LOG_WARNING("Verification will fail since checksum in image(0x%8.8" PRIx32 ") written to flash was different from calculated vector checksum(0x%8.8" PRIx32 ").",
                                        original_value, checksum);
                        LOG_WARNING("To remove this warning modify build tools on developer PC to inject correct LPC vector checksum.");
                }
@@ -598,7 +598,7 @@ static int lpc2000_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t of
                        free(last_buffer);
                }
 
-               LOG_DEBUG("writing 0x%x bytes to address 0x%x", thisrun_bytes, bank->base + offset + bytes_written);
+               LOG_DEBUG("writing 0x%" PRIx32 " bytes to address 0x%" PRIx32 , thisrun_bytes, bank->base + offset + bytes_written);
 
                /* Write data */
                param_table[0] = bank->base + offset + bytes_written;
@@ -667,7 +667,7 @@ static int lpc2000_info(struct flash_bank_s *bank, char *buf, int buf_size)
 {
        lpc2000_flash_bank_t *lpc2000_info = bank->driver_priv;
 
-       snprintf(buf, buf_size, "lpc2000 flash driver variant: %i, clk: %i", lpc2000_info->variant, lpc2000_info->cclk);
+       snprintf(buf, buf_size, "lpc2000 flash driver variant: %i, clk: %" PRIi32 , lpc2000_info->variant, lpc2000_info->cclk);
 
        return ERROR_OK;
 }
@@ -708,7 +708,7 @@ static int lpc2000_handle_part_id_command(struct command_context_s *cmd_ctx, cha
        }
        else
        {
-               command_print(cmd_ctx, "lpc2000 part id: 0x%8.8x", result_table[0]);
+               command_print(cmd_ctx, "lpc2000 part id: 0x%8.8" PRIx32 , result_table[0]);
        }
 
        return ERROR_OK;