/***************************************************************************
+ * Copyright (C) 2005 by Dominic Rath <Dominic.Rath@gmx.de> *
+ * Copyright (C) 2007-2010 Øyvind Harboe <oyvind.harboe@zylin.com> *
+ * Copyright (C) 2008 by Spencer Oliver <spen@spen-soft.co.uk> *
* Copyright (C) 2009 Zachary T Welch <zw@superlucidity.net> *
+ * Copyright (C) 2010 by Antonio Borneo <borneo.antonio@gmail.com> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
-#include <flash/flash.h>
+#include <flash/common.h>
+#include <flash/nor/core.h>
#include <flash/nor/imp.h>
+#include <target/image.h>
-// in flash.c, to be moved here
-extern struct flash_driver *flash_drivers[];
-extern struct flash_bank *flash_banks;
-struct flash_driver *flash_driver_find_by_name(const char *name)
+/**
+ * @file
+ * Upper level of NOR flash framework.
+ * The lower level interfaces are to drivers. These upper level ones
+ * primarily support access from Tcl scripts or from GDB.
+ */
+
+static struct flash_bank *flash_banks;
+
+int flash_driver_erase(struct flash_bank *bank, int first, int last)
{
- for (unsigned i = 0; flash_drivers[i]; i++)
+ int retval;
+
+ retval = bank->driver->erase(bank, first, last);
+ if (retval != ERROR_OK)
{
- if (strcmp(name, flash_drivers[i]->name) == 0)
- return flash_drivers[i];
+ LOG_ERROR("failed erasing sectors %d to %d", first, last);
}
- return NULL;
+
+ return retval;
+}
+
+int flash_driver_protect(struct flash_bank *bank, int set, int first, int last)
+{
+ int retval;
+
+ /* callers may not supply illegal parameters ... */
+ if (first < 0 || first > last || last >= bank->num_sectors)
+ {
+ LOG_ERROR("illegal sector range");
+ return ERROR_FAIL;
+ }
+
+ /* force "set" to 0/1 */
+ set = !!set;
+
+ /* DANGER!
+ *
+ * We must not use any cached information about protection state!!!!
+ *
+ * There are a million things that could change the protect state:
+ *
+ * the target could have reset, power cycled, been hot plugged,
+ * the application could have run, etc.
+ *
+ * Drivers only receive valid sector range.
+ */
+ retval = bank->driver->protect(bank, set, first, last);
+ if (retval != ERROR_OK)
+ {
+ LOG_ERROR("failed setting protection for areas %d to %d", first, last);
+ }
+
+ return retval;
+}
+
+int flash_driver_write(struct flash_bank *bank,
+ uint8_t *buffer, uint32_t offset, uint32_t count)
+{
+ int retval;
+
+ retval = bank->driver->write(bank, buffer, offset, count);
+ if (retval != ERROR_OK)
+ {
+ LOG_ERROR("error writing to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32,
+ bank->base, offset);
+ }
+
+ return retval;
+}
+
+int flash_driver_read(struct flash_bank *bank,
+ uint8_t *buffer, uint32_t offset, uint32_t count)
+{
+ int retval;
+
+ LOG_DEBUG("call flash_driver_read()");
+
+ retval = bank->driver->read(bank, buffer, offset, count);
+ if (retval != ERROR_OK)
+ {
+ LOG_ERROR("error reading to flash at address 0x%08" PRIx32 " at offset 0x%8.8" PRIx32,
+ bank->base, offset);
+ }
+
+ return retval;
+}
+
+int default_flash_read(struct flash_bank *bank,
+ uint8_t *buffer, uint32_t offset, uint32_t count)
+{
+ return target_read_buffer(bank->target, offset + bank->base, count, buffer);
}
void flash_bank_add(struct flash_bank *bank)
{
return flash_banks;
}
+
+struct flash_bank *get_flash_bank_by_num_noprobe(int num)
+{
+ struct flash_bank *p;
+ int i = 0;
+
+ for (p = flash_banks; p; p = p->next)
+ {
+ if (i++ == num)
+ {
+ return p;
+ }
+ }
+ LOG_ERROR("flash bank %d does not exist", num);
+ return NULL;
+}
+
+int flash_get_bank_count(void)
+{
+ struct flash_bank *p;
+ int i = 0;
+ for (p = flash_banks; p; p = p->next)
+ {
+ i++;
+ }
+ return i;
+}
+
+struct flash_bank *get_flash_bank_by_name_noprobe(const char *name)
+{
+ unsigned requested = get_flash_name_index(name);
+ unsigned found = 0;
+
+ struct flash_bank *bank;
+ for (bank = flash_banks; NULL != bank; bank = bank->next)
+ {
+ if (strcmp(bank->name, name) == 0)
+ return bank;
+ if (!flash_driver_name_matches(bank->driver->name, name))
+ continue;
+ if (++found < requested)
+ continue;
+ return bank;
+ }
+ return NULL;
+}
+
+int get_flash_bank_by_name(const char *name, struct flash_bank **bank_result)
+{
+ struct flash_bank *bank;
+ int retval;
+
+ bank = get_flash_bank_by_name_noprobe(name);
+ if (bank != NULL)
+ {
+ retval = bank->driver->auto_probe(bank);
+
+ if (retval != ERROR_OK)
+ {
+ LOG_ERROR("auto_probe failed");
+ return retval;
+ }
+ }
+
+ *bank_result = bank;
+ return ERROR_OK;
+}
+
+int get_flash_bank_by_num(int num, struct flash_bank **bank)
+{
+ struct flash_bank *p = get_flash_bank_by_num_noprobe(num);
+ int retval;
+
+ if (p == NULL)
+ {
+ return ERROR_FAIL;
+ }
+
+ retval = p->driver->auto_probe(p);
+
+ if (retval != ERROR_OK)
+ {
+ LOG_ERROR("auto_probe failed");
+ return retval;
+ }
+ *bank = p;
+ return ERROR_OK;
+}
+
+/* lookup flash bank by address, bank not found is success, but
+ * result_bank is set to NULL. */
+int get_flash_bank_by_addr(struct target *target, uint32_t addr, bool check, struct flash_bank **result_bank)
+{
+ struct flash_bank *c;
+
+ /* cycle through bank list */
+ for (c = flash_banks; c; c = c->next)
+ {
+ int retval;
+ retval = c->driver->auto_probe(c);
+
+ if (retval != ERROR_OK)
+ {
+ LOG_ERROR("auto_probe failed");
+ return retval;
+ }
+ /* check whether address belongs to this flash bank */
+ if ((addr >= c->base) && (addr <= c->base + (c->size - 1)) && target == c->target)
+ {
+ *result_bank = c;
+ return ERROR_OK;
+ }
+ }
+ *result_bank = NULL;
+ if (check)
+ {
+ LOG_ERROR("No flash at address 0x%08" PRIx32, addr);
+ return ERROR_FAIL;
+ }
+ return ERROR_OK;
+}
+
+int default_flash_mem_blank_check(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ const int buffer_size = 1024;
+ int i;
+ uint32_t nBytes;
+ int retval = ERROR_OK;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ uint8_t *buffer = malloc(buffer_size);
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ uint32_t j;
+ bank->sectors[i].is_erased = 1;
+
+ for (j = 0; j < bank->sectors[i].size; j += buffer_size)
+ {
+ uint32_t chunk;
+ chunk = buffer_size;
+ if (chunk > (j - bank->sectors[i].size))
+ {
+ chunk = (j - bank->sectors[i].size);
+ }
+
+ retval = target_read_memory(target, bank->base + bank->sectors[i].offset + j, 4, chunk/4, buffer);
+ if (retval != ERROR_OK)
+ {
+ goto done;
+ }
+
+ for (nBytes = 0; nBytes < chunk; nBytes++)
+ {
+ if (buffer[nBytes] != 0xFF)
+ {
+ bank->sectors[i].is_erased = 0;
+ break;
+ }
+ }
+ }
+ }
+
+ done:
+ free(buffer);
+
+ return retval;
+}
+
+int default_flash_blank_check(struct flash_bank *bank)
+{
+ struct target *target = bank->target;
+ int i;
+ int retval;
+ int fast_check = 0;
+ uint32_t blank;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ uint32_t address = bank->base + bank->sectors[i].offset;
+ uint32_t size = bank->sectors[i].size;
+
+ retval = target_blank_check_memory(target, address, size, &blank);
+ if (retval != ERROR_OK)
+ {
+ fast_check = 0;
+ break;
+ }
+ if (blank == 0xFF)
+ bank->sectors[i].is_erased = 1;
+ else
+ bank->sectors[i].is_erased = 0;
+ fast_check = 1;
+ }
+
+ if (!fast_check)
+ {
+ LOG_USER("Running slow fallback erase check - add working memory");
+ return default_flash_mem_blank_check(bank);
+ }
+
+ return ERROR_OK;
+}
+
+/* Manipulate given flash region, selecting the bank according to target
+ * and address. Maps an address range to a set of sectors, and issues
+ * the callback() on that set ... e.g. to erase or unprotect its members.
+ *
+ * (Note a current bad assumption: that protection operates on the same
+ * size sectors as erase operations use.)
+ *
+ * The "pad_reason" parameter is a kind of boolean: when it's NULL, the
+ * range must fit those sectors exactly. This is clearly safe; it can't
+ * erase data which the caller said to leave alone, for example. If it's
+ * non-NULL, rather than failing, extra data in the first and/or last
+ * sectors will be added to the range, and that reason string is used when
+ * warning about those additions.
+ */
+static int flash_iterate_address_range_inner(struct target *target,
+ char *pad_reason, uint32_t addr, uint32_t length,
+ int (*callback)(struct flash_bank *bank, int first, int last))
+{
+ struct flash_bank *c;
+ uint32_t last_addr = addr + length; /* first address AFTER end */
+ int first = -1;
+ int last = -1;
+ int i;
+
+ int retval = get_flash_bank_by_addr(target, addr, true, &c);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (c->size == 0 || c->num_sectors == 0)
+ {
+ LOG_ERROR("Bank is invalid");
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ if (length == 0)
+ {
+ /* special case, erase whole bank when length is zero */
+ if (addr != c->base)
+ {
+ LOG_ERROR("Whole bank access must start at beginning of bank.");
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ return callback(c, 0, c->num_sectors - 1);
+ }
+
+ /* check whether it all fits in this bank */
+ if (addr + length - 1 > c->base + c->size - 1)
+ {
+ LOG_ERROR("Flash access does not fit into bank.");
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ /** @todo: handle erasures that cross into adjacent banks */
+
+ addr -= c->base;
+ last_addr -= c->base;
+
+ for (i = 0; i < c->num_sectors; i++)
+ {
+ struct flash_sector *f = c->sectors + i;
+ uint32_t end = f->offset + f->size;
+
+ /* start only on a sector boundary */
+ if (first < 0) {
+ /* scanned past the first sector? */
+ if (addr < f->offset)
+ break;
+
+ /* is this the first sector? */
+ if (addr == f->offset)
+ first = i;
+
+ /* Does this need head-padding? If so, pad and warn;
+ * or else force an error.
+ *
+ * Such padding can make trouble, since *WE* can't
+ * ever know if that data was in use. The warning
+ * should help users sort out messes later.
+ */
+ else if (addr < end && pad_reason) {
+ /* FIXME say how many bytes (e.g. 80 KB) */
+ LOG_WARNING("Adding extra %s range, "
+ "%#8.8x to %#8.8x",
+ pad_reason,
+ (unsigned) f->offset,
+ (unsigned) addr - 1);
+ first = i;
+ } else
+ continue;
+ }
+
+ /* is this (also?) the last sector? */
+ if (last_addr == end) {
+ last = i;
+ break;
+ }
+
+ /* Does this need tail-padding? If so, pad and warn;
+ * or else force an error.
+ */
+ if (last_addr < end && pad_reason) {
+ /* FIXME say how many bytes (e.g. 80 KB) */
+ LOG_WARNING("Adding extra %s range, "
+ "%#8.8x to %#8.8x",
+ pad_reason,
+ (unsigned) last_addr,
+ (unsigned) end - 1);
+ last = i;
+ break;
+ }
+
+ /* MUST finish on a sector boundary */
+ if (last_addr <= f->offset)
+ break;
+ }
+
+ /* invalid start or end address? */
+ if (first == -1 || last == -1) {
+ LOG_ERROR("address range 0x%8.8x .. 0x%8.8x "
+ "is not sector-aligned",
+ (unsigned) (c->base + addr),
+ (unsigned) (c->base + last_addr - 1));
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ /* The NOR driver may trim this range down, based on what
+ * sectors are already erased/unprotected. GDB currently
+ * blocks such optimizations.
+ */
+ return callback(c, first, last);
+}
+
+/* The inner fn only handles a single bank, we could be spanning
+ * multiple chips.
+ */
+static int flash_iterate_address_range(struct target *target,
+ char *pad_reason, uint32_t addr, uint32_t length,
+ int (*callback)(struct flash_bank *bank, int first, int last))
+{
+ struct flash_bank *c;
+ int retval = ERROR_OK;
+
+ /* Danger! zero-length iterations means entire bank! */
+ do
+ {
+ retval = get_flash_bank_by_addr(target, addr, true, &c);
+ if (retval != ERROR_OK)
+ return retval;
+
+ uint32_t cur_length = length;
+ /* check whether it all fits in this bank */
+ if (addr + length - 1 > c->base + c->size - 1)
+ {
+ LOG_DEBUG("iterating over more than one flash bank.");
+ cur_length = c->base + c->size - addr;
+ }
+ retval = flash_iterate_address_range_inner(target,
+ pad_reason, addr, cur_length,
+ callback);
+ if (retval != ERROR_OK)
+ break;
+
+ length -= cur_length;
+ addr += cur_length;
+ } while (length > 0);
+
+ return retval;
+}
+
+int flash_erase_address_range(struct target *target,
+ bool pad, uint32_t addr, uint32_t length)
+{
+ return flash_iterate_address_range(target, pad ? "erase" : NULL,
+ addr, length, &flash_driver_erase);
+}
+
+static int flash_driver_unprotect(struct flash_bank *bank, int first, int last)
+{
+ return flash_driver_protect(bank, 0, first, last);
+}
+
+int flash_unlock_address_range(struct target *target, uint32_t addr, uint32_t length)
+{
+ /* By default, pad to sector boundaries ... the real issue here
+ * is that our (only) caller *permanently* removes protection,
+ * and doesn't restore it.
+ */
+ return flash_iterate_address_range(target, "unprotect",
+ addr, length, &flash_driver_unprotect);
+}
+
+static int compare_section (const void * a, const void * b)
+{
+ struct imagesection *b1, *b2;
+ b1=*((struct imagesection **)a);
+ b2=*((struct imagesection **)b);
+
+ if (b1->base_address == b2->base_address)
+ {
+ return 0;
+ } else if (b1->base_address > b2->base_address)
+ {
+ return 1;
+ } else
+ {
+ return -1;
+ }
+}
+
+
+int flash_write_unlock(struct target *target, struct image *image,
+ uint32_t *written, int erase, bool unlock)
+{
+ int retval = ERROR_OK;
+
+ int section;
+ uint32_t section_offset;
+ struct flash_bank *c;
+ int *padding;
+
+ section = 0;
+ section_offset = 0;
+
+ if (written)
+ *written = 0;
+
+ if (erase)
+ {
+ /* assume all sectors need erasing - stops any problems
+ * when flash_write is called multiple times */
+
+ flash_set_dirty();
+ }
+
+ /* allocate padding array */
+ padding = calloc(image->num_sections, sizeof(*padding));
+
+ /* This fn requires all sections to be in ascending order of addresses,
+ * whereas an image can have sections out of order. */
+ struct imagesection **sections = malloc(sizeof(struct imagesection *) *
+ image->num_sections);
+ int i;
+ for (i = 0; i < image->num_sections; i++)
+ {
+ sections[i] = &image->sections[i];
+ }
+
+ qsort(sections, image->num_sections, sizeof(struct imagesection *),
+ compare_section);
+
+ /* loop until we reach end of the image */
+ while (section < image->num_sections)
+ {
+ uint32_t buffer_size;
+ uint8_t *buffer;
+ int section_last;
+ uint32_t run_address = sections[section]->base_address + section_offset;
+ uint32_t run_size = sections[section]->size - section_offset;
+ int pad_bytes = 0;
+
+ if (sections[section]->size == 0)
+ {
+ LOG_WARNING("empty section %d", section);
+ section++;
+ section_offset = 0;
+ continue;
+ }
+
+ /* find the corresponding flash bank */
+ retval = get_flash_bank_by_addr(target, run_address, false, &c);
+ if (retval != ERROR_OK)
+ {
+ goto done;
+ }
+ if (c == NULL)
+ {
+ section++; /* and skip it */
+ section_offset = 0;
+ continue;
+ }
+
+ /* collect consecutive sections which fall into the same bank */
+ section_last = section;
+ padding[section] = 0;
+ while ((run_address + run_size - 1 < c->base + c->size - 1)
+ && (section_last + 1 < image->num_sections))
+ {
+ /* sections are sorted */
+ assert(sections[section_last + 1]->base_address >= c->base);
+ if (sections[section_last + 1]->base_address >= (c->base + c->size))
+ {
+ /* Done with this bank */
+ break;
+ }
+
+ /* FIXME This needlessly touches sectors BETWEEN the
+ * sections it's writing. Without auto erase, it just
+ * writes ones. That WILL INVALIDATE data in cases
+ * like Stellaris Tempest chips, corrupting internal
+ * ECC codes; and at least FreeScale suggests issues
+ * with that approach (in HC11 documentation).
+ *
+ * With auto erase enabled, data in those sectors will
+ * be needlessly destroyed; and some of the limited
+ * number of flash erase cycles will be wasted...
+ *
+ * In both cases, the extra writes slow things down.
+ */
+
+ /* if we have multiple sections within our image,
+ * flash programming could fail due to alignment issues
+ * attempt to rebuild a consecutive buffer for the flash loader */
+ pad_bytes = (sections[section_last + 1]->base_address) - (run_address + run_size);
+ padding[section_last] = pad_bytes;
+ run_size += sections[++section_last]->size;
+ run_size += pad_bytes;
+
+ if (pad_bytes > 0)
+ LOG_INFO("Padding image section %d with %d bytes", section_last-1, pad_bytes);
+ }
+
+ if (run_address + run_size - 1 > c->base + c->size - 1)
+ {
+ /* If we have more than one flash chip back to back, then we limit
+ * the current write operation to the current chip.
+ */
+ LOG_DEBUG("Truncate flash run size to the current flash chip.");
+
+ run_size = c->base + c->size - run_address;
+ assert(run_size > 0);
+ }
+
+ /* If we're applying any sector automagic, then pad this
+ * (maybe-combined) segment to the end of its last sector.
+ */
+ if (unlock || erase) {
+ int sector;
+ uint32_t offset_start = run_address - c->base;
+ uint32_t offset_end = offset_start + run_size;
+ uint32_t end = offset_end, delta;
+
+ for (sector = 0; sector < c->num_sectors; sector++) {
+ end = c->sectors[sector].offset
+ + c->sectors[sector].size;
+ if (offset_end <= end)
+ break;
+ }
+
+ delta = end - offset_end;
+ padding[section_last] += delta;
+ run_size += delta;
+ }
+
+ /* allocate buffer */
+ buffer = malloc(run_size);
+ if (buffer == NULL)
+ {
+ LOG_ERROR("Out of memory for flash bank buffer");
+ retval = ERROR_FAIL;
+ goto done;
+ }
+ buffer_size = 0;
+
+ /* read sections to the buffer */
+ while (buffer_size < run_size)
+ {
+ size_t size_read;
+
+ size_read = run_size - buffer_size;
+ if (size_read > sections[section]->size - section_offset)
+ size_read = sections[section]->size - section_offset;
+
+ /* KLUDGE!
+ *
+ * #¤%#"%¤% we have to figure out the section # from the sorted
+ * list of pointers to sections to invoke image_read_section()...
+ */
+ intptr_t diff = (intptr_t)sections[section] - (intptr_t)image->sections;
+ int t_section_num = diff / sizeof(struct imagesection);
+
+ LOG_DEBUG("image_read_section: section = %d, t_section_num = %d, section_offset = %d, buffer_size = %d, size_read = %d",
+ (int)section,
+(int)t_section_num, (int)section_offset, (int)buffer_size, (int)size_read);
+ if ((retval = image_read_section(image, t_section_num, section_offset,
+ size_read, buffer + buffer_size, &size_read)) != ERROR_OK || size_read == 0)
+ {
+ free(buffer);
+ goto done;
+ }
+
+ /* see if we need to pad the section */
+ while (padding[section]--)
+ (buffer + buffer_size)[size_read++] = 0xff;
+
+ buffer_size += size_read;
+ section_offset += size_read;
+
+ if (section_offset >= sections[section]->size)
+ {
+ section++;
+ section_offset = 0;
+ }
+ }
+
+ retval = ERROR_OK;
+
+ if (unlock)
+ {
+ retval = flash_unlock_address_range(target, run_address, run_size);
+ }
+ if (retval == ERROR_OK)
+ {
+ if (erase)
+ {
+ /* calculate and erase sectors */
+ retval = flash_erase_address_range(target,
+ true, run_address, run_size);
+ }
+ }
+
+ if (retval == ERROR_OK)
+ {
+ /* write flash sectors */
+ retval = flash_driver_write(c, buffer, run_address - c->base, run_size);
+ }
+
+ free(buffer);
+
+ if (retval != ERROR_OK)
+ {
+ /* abort operation */
+ goto done;
+ }
+
+ if (written != NULL)
+ *written += run_size; /* add run size to total written counter */
+ }
+
+
+done:
+ free(sections);
+ free(padding);
+
+ return retval;
+}
+
+int flash_write(struct target *target, struct image *image,
+ uint32_t *written, int erase)
+{
+ return flash_write_unlock(target, image, written, erase, false);
+}