flash/stm32l4x: introduce flash programming without loader
[openocd.git] / src / flash / nor / str9x.c
index 2158622a10016c80a7e945a6ff01bafaa8228706..8f39d75fa5f591c02bcc457b709f3b1bf88fb3fe 100644 (file)
@@ -19,9 +19,7 @@
  *   GNU General Public License for more details.                          *
  *                                                                         *
  *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.           *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  ***************************************************************************/
 
 #ifdef HAVE_CONFIG_H
@@ -70,7 +68,7 @@ static int str9x_build_block_list(struct flash_bank *bank)
        struct str9x_flash_bank *str9x_info = bank->driver_priv;
 
        int i;
-       int num_sectors;
+       unsigned int num_sectors;
        int b0_sectors = 0, b1_sectors = 0;
        uint32_t offset = 0;
 
@@ -166,7 +164,6 @@ static int str9x_protect_check(struct flash_bank *bank)
        struct str9x_flash_bank *str9x_info = bank->driver_priv;
        struct target *target = bank->target;
 
-       int i;
        uint32_t adr;
        uint32_t status = 0;
        uint16_t hstatus = 0;
@@ -213,7 +210,7 @@ static int str9x_protect_check(struct flash_bank *bank)
        if (retval != ERROR_OK)
                return retval;
 
-       for (i = 0; i < bank->num_sectors; i++) {
+       for (unsigned int i = 0; i < bank->num_sectors; i++) {
                if (status & str9x_info->sector_bits[i])
                        bank->sectors[i].is_protected = 1;
                else
@@ -223,10 +220,10 @@ static int str9x_protect_check(struct flash_bank *bank)
        return ERROR_OK;
 }
 
-static int str9x_erase(struct flash_bank *bank, int first, int last)
+static int str9x_erase(struct flash_bank *bank, unsigned int first,
+               unsigned int last)
 {
        struct target *target = bank->target;
-       int i;
        uint32_t adr;
        uint8_t status;
        uint8_t erase_cmd;
@@ -252,7 +249,7 @@ static int str9x_erase(struct flash_bank *bank, int first, int last)
        /* this is so the compiler can *know* */
        assert(total_timeout > 0);
 
-       for (i = first; i <= last; i++) {
+       for (unsigned int i = first; i <= last; i++) {
                int retval;
                adr = bank->base + bank->sectors[i].offset;
 
@@ -303,17 +300,13 @@ static int str9x_erase(struct flash_bank *bank, int first, int last)
                        break;
        }
 
-       for (i = first; i <= last; i++)
-               bank->sectors[i].is_erased = 1;
-
        return ERROR_OK;
 }
 
-static int str9x_protect(struct flash_bank *bank,
-               int set, int first, int last)
+static int str9x_protect(struct flash_bank *bank, int set, unsigned int first,
+               unsigned int last)
 {
        struct target *target = bank->target;
-       int i;
        uint32_t adr;
        uint8_t status;
 
@@ -322,7 +315,7 @@ static int str9x_protect(struct flash_bank *bank,
                return ERROR_TARGET_NOT_HALTED;
        }
 
-       for (i = first; i <= last; i++) {
+       for (unsigned int i = first; i <= last; i++) {
                /* Level One Protection */
 
                adr = bank->base + bank->sectors[i].offset;
@@ -347,7 +340,7 @@ static int str9x_protect(struct flash_bank *bank,
 }
 
 static int str9x_write_block(struct flash_bank *bank,
-               uint8_t *buffer, uint32_t offset, uint32_t count)
+               const uint8_t *buffer, uint32_t offset, uint32_t count)
 {
        struct target *target = bank->target;
        uint32_t buffer_size = 32768;
@@ -358,7 +351,7 @@ static int str9x_write_block(struct flash_bank *bank,
        struct arm_algorithm arm_algo;
        int retval = ERROR_OK;
 
-       /* see contib/loaders/flash/str9x.s for src */
+       /* see contrib/loaders/flash/str9x.s for src */
 
        static const uint32_t str9x_flash_write_code[] = {
                                        /* write:                               */
@@ -390,7 +383,7 @@ static int str9x_write_block(struct flash_bank *bank,
                        &write_algorithm) != ERROR_OK) {
                LOG_WARNING("no working area available, can't do block memory writes");
                return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
-       };
+       }
 
        uint8_t code[sizeof(str9x_flash_write_code)];
        target_buffer_set_u32_array(target, code, ARRAY_SIZE(str9x_flash_write_code),
@@ -459,7 +452,7 @@ static int str9x_write_block(struct flash_bank *bank,
 }
 
 static int str9x_write(struct flash_bank *bank,
-               uint8_t *buffer, uint32_t offset, uint32_t count)
+               const uint8_t *buffer, uint32_t offset, uint32_t count)
 {
        struct target *target = bank->target;
        uint32_t words_remaining = (count / 2);
@@ -470,7 +463,6 @@ static int str9x_write(struct flash_bank *bank,
        int retval;
        uint32_t check_address = offset;
        uint32_t bank_adr;
-       int i;
 
        if (bank->target->state != TARGET_HALTED) {
                LOG_ERROR("Target not halted");
@@ -482,7 +474,7 @@ static int str9x_write(struct flash_bank *bank,
                return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
        }
 
-       for (i = 0; i < bank->num_sectors; i++) {
+       for (unsigned int i = 0; i < bank->num_sectors; i++) {
                uint32_t sec_start = bank->sectors[i].offset;
                uint32_t sec_end = sec_start + bank->sectors[i].size;
 
@@ -616,7 +608,7 @@ COMMAND_HANDLER(str9x_handle_flash_config_command)
 
        struct flash_bank *bank;
        int retval = CALL_COMMAND_HANDLER(flash_command_get_bank, 0, &bank);
-       if (ERROR_OK != retval)
+       if (retval != ERROR_OK)
                return retval;
 
        uint32_t bbsr, nbbsr, bbadr, nbbadr;
@@ -669,7 +661,7 @@ static const struct command_registration str9x_command_handlers[] = {
        COMMAND_REGISTRATION_DONE
 };
 
-struct flash_driver str9x_flash = {
+const struct flash_driver str9x_flash = {
        .name = "str9x",
        .commands = str9x_command_handlers,
        .flash_bank_command = str9x_flash_bank_command,
@@ -681,4 +673,5 @@ struct flash_driver str9x_flash = {
        .auto_probe = str9x_probe,
        .erase_check = default_flash_blank_check,
        .protect_check = str9x_protect_check,
+       .free_driver_priv = default_flash_free_driver_priv,
 };

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)