int stm32x_handle_options_read_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int stm32x_handle_options_write_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+int stm32x_mass_erase(struct flash_bank_s *bank);
flash_driver_t stm32x_flash =
{
.write = stm32x_write,
.probe = stm32x_probe,
.auto_probe = stm32x_auto_probe,
- .erase_check = default_flash_blank_check,
+ .erase_check = default_flash_mem_blank_check,
.protect_check = stm32x_protect_check,
.info = stm32x_info
};
return ERROR_OK;
}
-
int stm32x_protect_check(struct flash_bank_s *bank)
{
target_t *target = bank->target;
+ stm32x_flash_bank_t *stm32x_info = bank->driver_priv;
u32 protection;
int i, s;
int num_bits;
-
+
if (target->state != TARGET_HALTED)
{
return ERROR_TARGET_NOT_HALTED;
}
-
- /* each bit refers to a 4bank protection */
+
+ /* medium density - each bit refers to a 4bank protection
+ * high density - each bit refers to a 2bank protection */
target_read_u32(target, STM32_FLASH_WRPR, &protection);
- /* each protection bit is for 4 1K pages */
- num_bits = (bank->num_sectors / 4);
+ /* medium density - each protection bit is for 4 * 1K pages
+ * high density - each protection bit is for 2 * 2K pages */
+ num_bits = (bank->num_sectors / stm32x_info->ppage_size);
for (i = 0; i < num_bits; i++)
{
if( protection & (1 << i))
set = 0;
- for (s = 0; s < 4; s++)
- bank->sectors[(i * 4) + s].is_protected = set;
+ for (s = 0; s < stm32x_info->ppage_size; s++)
+ bank->sectors[(i * stm32x_info->ppage_size) + s].is_protected = set;
}
return ERROR_OK;
int stm32x_erase(struct flash_bank_s *bank, int first, int last)
{
target_t *target = bank->target;
-
int i;
u32 status;
{
return ERROR_TARGET_NOT_HALTED;
}
-
+
+ if ((first == 0) && (last == (bank->num_sectors - 1)))
+ {
+ return stm32x_mass_erase(bank);
+ }
+
/* unlock flash registers */
target_write_u32(target, STM32_FLASH_KEYR, KEY1);
target_write_u32(target, STM32_FLASH_KEYR, KEY2);
return ERROR_TARGET_NOT_HALTED;
}
- if ((first && (first % 4)) || ((last + 1) && (last + 1) % 4))
+ if ((first && (first % stm32x_info->ppage_size)) || ((last + 1) && (last + 1) % stm32x_info->ppage_size))
{
- LOG_WARNING("sector start/end incorrect - stm32 has 4K sector protection");
+ LOG_WARNING("sector start/end incorrect - stm32 has %dK sector protection", stm32x_info->ppage_size);
return ERROR_FLASH_SECTOR_INVALID;
}
- /* each bit refers to a 4bank protection */
+ /* medium density - each bit refers to a 4bank protection
+ * high density - each bit refers to a 2bank protection */
target_read_u32(target, STM32_FLASH_WRPR, &protection);
prot_reg[0] = (u16)protection;
for (i = first; i <= last; i++)
{
- reg = (i / 4) / 8;
- bit = (i / 4) - (reg * 8);
+ reg = (i / stm32x_info->ppage_size) / 8;
+ bit = (i / stm32x_info->ppage_size) - (reg * 8);
if( set )
prot_reg[reg] &= ~(1 << bit);
stm32x_info->write_algorithm->address + (sizeof(stm32x_flash_write_code) - 10), 10000, &armv7m_info)) != ERROR_OK)
{
LOG_ERROR("error executing stm32x flash write algorithm");
+ retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
target_t *target = bank->target;
stm32x_flash_bank_t *stm32x_info = bank->driver_priv;
int i;
- u16 num_sectors;
+ u16 num_pages;
u32 device_id;
+ int page_size;
if (bank->target->state != TARGET_HALTED)
{
target_read_u32(target, 0xE0042000, &device_id);
LOG_INFO( "device id = 0x%08x", device_id );
- if (!(device_id & 0x410))
- {
- LOG_WARNING( "Cannot identify target as a STM32 family." );
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
/* get flash size from target */
- target_read_u16(target, 0x1FFFF7E0, &num_sectors);
+ if (target_read_u16(target, 0x1FFFF7E0, &num_pages) != ERROR_OK)
+ {
+ /* failed reading flash size, default to max target family */
+ num_pages = 0xffff;
+ }
- /* check for early silicon rev A */
- if ((device_id >> 16) == 0 )
+ if ((device_id & 0x7ff) == 0x410)
+ {
+ /* medium density - we have 1k pages
+ * 4 pages for a protection area */
+ page_size = 1024;
+ stm32x_info->ppage_size = 4;
+
+ /* check for early silicon */
+ if (num_pages == 0xffff)
+ {
+ /* number of sectors incorrect on revA */
+ LOG_WARNING( "STM32 flash size failed, probe inaccurate - assuming 128k flash" );
+ num_pages = 128;
+ }
+ }
+ else if ((device_id & 0x7ff) == 0x414)
{
- /* number of sectors incorrect on revA */
- LOG_WARNING( "STM32 Rev A Silicon detected, probe inaccurate - assuming 128k flash" );
- num_sectors = 128;
+ /* high density - we have 2k pages
+ * 2 pages for a protection area */
+ page_size = 2048;
+ stm32x_info->ppage_size = 2;
+
+ /* check for early silicon */
+ if (num_pages == 0xffff)
+ {
+ /* number of sectors incorrect on revZ */
+ LOG_WARNING( "STM32 flash size failed, probe inaccurate - assuming 512k flash" );
+ num_pages = 512;
+ }
+ }
+ else
+ {
+ LOG_WARNING( "Cannot identify target as a STM32 family." );
+ return ERROR_FLASH_OPERATION_FAILED;
}
- LOG_INFO( "flash size = %dkbytes", num_sectors );
+ LOG_INFO( "flash size = %dkbytes", num_pages );
+
+ /* calculate numbers of pages */
+ num_pages /= (page_size / 1024);
bank->base = 0x08000000;
- bank->size = num_sectors * 1024;
- bank->num_sectors = num_sectors;
- bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
+ bank->size = (num_pages * page_size);
+ bank->num_sectors = num_pages;
+ bank->sectors = malloc(sizeof(flash_sector_t) * num_pages);
- for (i = 0; i < num_sectors; i++)
+ for (i = 0; i < num_pages; i++)
{
- bank->sectors[i].offset = i * 1024;
- bank->sectors[i].size = 1024;
+ bank->sectors[i].offset = i * page_size;
+ bank->sectors[i].size = page_size;
bank->sectors[i].is_erased = -1;
bank->sectors[i].is_protected = 1;
}
return ERROR_OK;
}
-int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+int stm32x_mass_erase(struct flash_bank_s *bank)
{
- target_t *target = NULL;
- stm32x_flash_bank_t *stm32x_info = NULL;
- flash_bank_t *bank;
+ target_t *target = bank->target;
u32 status;
- if (argc < 1)
- {
- command_print(cmd_ctx, "stm32x mass_erase <bank>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- stm32x_info = bank->driver_priv;
-
- target = bank->target;
-
if (target->state != TARGET_HALTED)
{
return ERROR_TARGET_NOT_HALTED;
if( status & FLASH_WRPRTERR )
{
- command_print(cmd_ctx, "stm32x device protected");
+ LOG_ERROR("stm32x device protected");
return ERROR_OK;
}
if( status & FLASH_PGERR )
{
- command_print(cmd_ctx, "stm32x device programming failed");
+ LOG_ERROR("stm32x device programming failed");
+ return ERROR_OK;
+ }
+
+ return ERROR_OK;
+}
+
+int stm32x_handle_mass_erase_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+{
+ flash_bank_t *bank;
+ int i;
+
+ if (argc < 1)
+ {
+ command_print(cmd_ctx, "stm32x mass_erase <bank>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
+ if (!bank)
+ {
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
return ERROR_OK;
}
- command_print(cmd_ctx, "stm32x mass erase complete");
+ if (stm32x_mass_erase(bank) == ERROR_OK)
+ {
+ /* set all sectors as erased */
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ bank->sectors[i].is_erased = 1;
+ }
+
+ command_print(cmd_ctx, "stm32x mass erase complete");
+ }
+ else
+ {
+ command_print(cmd_ctx, "stm32x mass erase failed");
+ }
return ERROR_OK;
}
Code Review / openocd.git / blobdiff