openocd: src/jtag: replace the GPL-2.0-or-later license tag
[openocd.git] / src / jtag / drivers / amt_jtagaccel.c
index 45f2d5c4ff1e0b6a92763305d8e17d8ec1305c2f..01db6e4ca2b54a5fec0b02eb03670a5708c0b108 100644 (file)
@@ -1,27 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
 /***************************************************************************
  *   Copyright (C) 2005 by Dominic Rath                                    *
  *   Dominic.Rath@gmx.de                                                   *
- *                                                                         *
- *   This program is free software; you can redistribute it and/or modify  *
- *   it under the terms of the GNU General Public License as published by  *
- *   the Free Software Foundation; either version 2 of the License, or     *
- *   (at your option) any later version.                                   *
- *                                                                         *
- *   This program is distributed in the hope that it will be useful,       *
- *   but WITHOUT ANY WARRANTY; without even the implied warranty of        *
- *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the         *
- *   GNU General Public License for more details.                          *
- *                                                                         *
- *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.           *
  ***************************************************************************/
 
 #ifdef HAVE_CONFIG_H
 #include "config.h"
 #endif
 
+#include <jtag/adapter.h>
 #include <jtag/interface.h>
 
 #if PARPORT_USE_PPDEV == 1
@@ -124,7 +112,7 @@ static const int data_mode = IEEE1284_MODE_EPP | IEEE1284_DATA;
  * 4: Shift-IR
  * 5: Pause-IR
  */
-static uint8_t amt_jtagaccel_tap_move[6][6][2] = {
+static const uint8_t amt_jtagaccel_tap_move[6][6][2] = {
        /*         RESET         IDLE        DRSHIFT       DRPAUSE       IRSHIFT       IRPAUSE             */
        { {0x1f, 0x00}, {0x0f, 0x00}, {0x05, 0x00}, {0x0a, 0x00}, {0x06, 0x00}, {0x96, 0x00} }, /* RESET */
        { {0x1f, 0x00}, {0x00, 0x00}, {0x04, 0x00}, {0x05, 0x00}, {0x06, 0x00}, {0x0b, 0x00} }, /* IDLE */
@@ -200,7 +188,7 @@ static void amt_jtagaccel_state_move(void)
        aw_scan_tms_5 = 0x40 | (tms_scan[0] & 0x1f);
        AMT_AW(aw_scan_tms_5);
        int jtag_speed = 0;
-       int retval = jtag_get_speed(&jtag_speed);
+       int retval = adapter_get_speed(&jtag_speed);
        assert(retval == ERROR_OK);
        if (jtag_speed > 3 || rtck_enabled)
                amt_wait_scan_busy();
@@ -256,7 +244,7 @@ static void amt_jtagaccel_scan(bool ir_scan, enum scan_type type, uint8_t *buffe
        uint8_t aw_tms_scan;
        uint8_t tms_scan[2];
        int jtag_speed_var;
-       int retval = jtag_get_speed(&jtag_speed_var);
+       int retval = adapter_get_speed(&jtag_speed_var);
        assert(retval == ERROR_OK);
 
        if (ir_scan)
@@ -345,48 +333,37 @@ static int amt_jtagaccel_execute_queue(void)
        while (cmd) {
                switch (cmd->type) {
                        case JTAG_RESET:
-#ifdef _DEBUG_JTAG_IO_
-                               LOG_DEBUG("reset trst: %i srst %i",
-                               cmd->cmd.reset->trst,
-                               cmd->cmd.reset->srst);
-#endif
+                               LOG_DEBUG_IO("reset trst: %i srst %i",
+                                               cmd->cmd.reset->trst,
+                                               cmd->cmd.reset->srst);
                                if (cmd->cmd.reset->trst == 1)
                                        tap_set_state(TAP_RESET);
                                amt_jtagaccel_reset(cmd->cmd.reset->trst, cmd->cmd.reset->srst);
                                break;
                        case JTAG_RUNTEST:
-#ifdef _DEBUG_JTAG_IO_
-                               LOG_DEBUG("runtest %i cycles, end in %i",
-                               cmd->cmd.runtest->num_cycles,
-                               cmd->cmd.runtest->end_state);
-#endif
+                               LOG_DEBUG_IO("runtest %i cycles, end in %i",
+                                               cmd->cmd.runtest->num_cycles,
+                                               cmd->cmd.runtest->end_state);
                                amt_jtagaccel_end_state(cmd->cmd.runtest->end_state);
                                amt_jtagaccel_runtest(cmd->cmd.runtest->num_cycles);
                                break;
                        case JTAG_TLR_RESET:
-#ifdef _DEBUG_JTAG_IO_
-                               LOG_DEBUG("statemove end in %i", cmd->cmd.statemove->end_state);
-#endif
+                               LOG_DEBUG_IO("statemove end in %i", cmd->cmd.statemove->end_state);
                                amt_jtagaccel_end_state(cmd->cmd.statemove->end_state);
                                amt_jtagaccel_state_move();
                                break;
                        case JTAG_SCAN:
-#ifdef _DEBUG_JTAG_IO_
-                               LOG_DEBUG("scan end in %i", cmd->cmd.scan->end_state);
-#endif
+                               LOG_DEBUG_IO("scan end in %i", cmd->cmd.scan->end_state);
                                amt_jtagaccel_end_state(cmd->cmd.scan->end_state);
                                scan_size = jtag_build_buffer(cmd->cmd.scan, &buffer);
                                type = jtag_scan_type(cmd->cmd.scan);
                                amt_jtagaccel_scan(cmd->cmd.scan->ir_scan, type, buffer, scan_size);
                                if (jtag_read_buffer(buffer, cmd->cmd.scan) != ERROR_OK)
                                        retval = ERROR_JTAG_QUEUE_FAILED;
-                               if (buffer)
-                                       free(buffer);
+                               free(buffer);
                                break;
                        case JTAG_SLEEP:
-#ifdef _DEBUG_JTAG_IO_
-                               LOG_DEBUG("sleep %" PRIi32, cmd->cmd.sleep->us);
-#endif
+                               LOG_DEBUG_IO("sleep %" PRIu32, cmd->cmd.sleep->us);
                                jtag_sleep(cmd->cmd.sleep->us);
                                break;
                        default:
@@ -405,7 +382,7 @@ int amt_jtagaccel_get_giveio_access(void)
        HANDLE h;
        OSVERSIONINFO version;
 
-       version.dwOSVersionInfoSize = sizeof version;
+       version.dwOSVersionInfoSize = sizeof(version);
        if (!GetVersionEx(&version)) {
                errno = EINVAL;
                return -1;
@@ -550,7 +527,7 @@ COMMAND_HANDLER(amt_jtagaccel_handle_parport_port_command)
                }
        }
 
-       command_print(CMD_CTX, "parport port = %u", amt_jtagaccel_port);
+       command_print(CMD, "parport port = %u", amt_jtagaccel_port);
 
        return ERROR_OK;
 }
@@ -558,7 +535,7 @@ COMMAND_HANDLER(amt_jtagaccel_handle_parport_port_command)
 COMMAND_HANDLER(amt_jtagaccel_handle_rtck_command)
 {
        if (CMD_ARGC == 0) {
-               command_print(CMD_CTX,
+               command_print(CMD,
                        "amt_jtagaccel RTCK feature %s",
                        (rtck_enabled) ? "enabled" : "disabled");
                return ERROR_OK;
@@ -596,12 +573,18 @@ static const struct command_registration amtjtagaccel_command_handlers[] = {
        COMMAND_REGISTRATION_DONE
 };
 
-struct jtag_interface amt_jtagaccel_interface = {
+static struct jtag_interface amt_jtagaccel_interface = {
+       .execute_queue = amt_jtagaccel_execute_queue,
+};
+
+struct adapter_driver amt_jtagaccel_adapter_driver = {
        .name = "amt_jtagaccel",
+       .transports = jtag_only,
        .commands = amtjtagaccel_command_handlers,
 
        .init = amt_jtagaccel_init,
        .quit = amt_jtagaccel_quit,
        .speed = amt_jtagaccel_speed,
-       .execute_queue = amt_jtagaccel_execute_queue,
+
+       .jtag_ops = &amt_jtagaccel_interface,
 };

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)