* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
***************************************************************************/
+
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
-#include "interface.h"
+#include <jtag/interface.h>
#include "bitbang.h"
/* -ino: 060521-1036 */
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
#include <machine/sysarch.h>
#include <machine/cpufunc.h>
-#define ioperm(startport,length,enable)\
- i386_set_ioperm((startport), (length), (enable))
+#define ioperm(startport, length, enable)\
+ i386_set_ioperm((startport), (length), (enable))
#endif /* __FreeBSD__ */
#if PARPORT_USE_PPDEV == 1
#include <windows.h>
#endif
-
/* parallel port cable description
*/
struct cable {
- char* name;
+ char *name;
uint8_t TDO_MASK; /* status port bit containing current TDO value */
uint8_t TRST_MASK; /* data port bit for TRST */
uint8_t TMS_MASK; /* data port bit for TMS */
uint8_t LED_MASK; /* data port bit for LED */
};
-static struct cable cables[] =
-{
- /* name tdo trst tms tck tdi srst o_inv i_inv init exit led */
+static struct cable cables[] = {
+ /* name tdo trst tms tck tdi srst o_inv i_inv init exit led */
{ "wiggler", 0x80, 0x10, 0x02, 0x04, 0x08, 0x01, 0x01, 0x80, 0x80, 0x80, 0x00 },
{ "wiggler2", 0x80, 0x10, 0x02, 0x04, 0x08, 0x01, 0x01, 0x80, 0x80, 0x00, 0x20 },
- { "wiggler_ntrst_inverted",
- 0x80, 0x10, 0x02, 0x04, 0x08, 0x01, 0x11, 0x80, 0x80, 0x80, 0x00 },
- { "old_amt_wiggler", 0x80, 0x01, 0x02, 0x04, 0x08, 0x10, 0x11, 0x80, 0x80, 0x80, 0x00 },
+ { "wiggler_ntrst_inverted", 0x80, 0x10, 0x02, 0x04, 0x08, 0x01, 0x11, 0x80, 0x80, 0x80, 0x00 },
+ { "old_amt_wiggler", 0x80, 0x01, 0x02, 0x04, 0x08, 0x10, 0x11, 0x80, 0x80, 0x80, 0x00 },
{ "arm-jtag", 0x80, 0x01, 0x02, 0x04, 0x08, 0x10, 0x01, 0x80, 0x80, 0x80, 0x00 },
{ "chameleon", 0x80, 0x00, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00 },
{ "dlc5", 0x10, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00 },
};
/* configuration */
-static char* parport_cable = NULL;
+static char *parport_cable;
static uint16_t parport_port;
-static bool parport_exit = 0;
+static bool parport_exit;
static uint32_t parport_toggling_time_ns = 1000;
static int wait_states;
/* interface variables
*/
-static struct cable* cable;
-static uint8_t dataport_value = 0x0;
+static struct cable *cable;
+static uint8_t dataport_value;
#if PARPORT_USE_PPDEV == 1
static int device_handle;
int data = 0;
#if PARPORT_USE_PPDEV == 1
- ioctl(device_handle, PPRSTATUS, & data);
+ ioctl(device_handle, PPRSTATUS, &data);
#else
data = inb(statusport);
#endif
return 0;
}
-static __inline__ void parport_write_data(void)
+static inline void parport_write_data(void)
{
uint8_t output;
output = dataport_value ^ cable->OUTPUT_INVERT;
return ERROR_OK;
}
-static int parport_khz(int khz, int* jtag_speed)
+static int parport_khz(int khz, int *jtag_speed)
{
if (khz == 0) {
LOG_DEBUG("RCLK not supported");
return ERROR_OK;
}
-static int parport_speed_div(int speed, int* khz)
+static int parport_speed_div(int speed, int *khz)
{
uint32_t denominator = (speed + 1) * parport_toggling_time_ns;
struct cable *cur_cable;
#if PARPORT_USE_PPDEV == 1
char buffer[256];
- int i = 0;
#endif
cur_cable = cables;
- if ((parport_cable == NULL) || (parport_cable[0] == 0))
- {
- parport_cable = "wiggler";
+ if (parport_cable == NULL) {
+ parport_cable = strdup("wiggler");
LOG_WARNING("No parport cable specified, using default 'wiggler'");
}
- while (cur_cable->name)
- {
- if (strcmp(cur_cable->name, parport_cable) == 0)
- {
+ while (cur_cable->name) {
+ if (strcmp(cur_cable->name, parport_cable) == 0) {
cable = cur_cable;
break;
}
cur_cable++;
}
- if (!cable)
- {
+ if (!cable) {
LOG_ERROR("No matching cable found for %s", parport_cable);
return ERROR_JTAG_INIT_FAILED;
}
dataport_value = cable->PORT_INIT;
#if PARPORT_USE_PPDEV == 1
- if (device_handle > 0)
- {
+ if (device_handle > 0) {
LOG_ERROR("device is already opened");
return ERROR_JTAG_INIT_FAILED;
}
device_handle = open(buffer, O_WRONLY);
#endif /* __FreeBSD__, __FreeBSD_kernel__ */
- if (device_handle < 0)
- {
+ if (device_handle < 0) {
int err = errno;
LOG_ERROR("cannot open device. check it exists and that user read and write rights are set. errno=%d", err);
return ERROR_JTAG_INIT_FAILED;
LOG_DEBUG("...open");
#if !defined(__FreeBSD__) && !defined(__FreeBSD_kernel__)
- i = ioctl(device_handle, PPCLAIM);
- if (i < 0)
- {
+ int i = ioctl(device_handle, PPCLAIM);
+
+ if (i < 0) {
LOG_ERROR("cannot claim device");
return ERROR_JTAG_INIT_FAILED;
}
i = PARPORT_MODE_COMPAT;
- i= ioctl(device_handle, PPSETMODE, & i);
- if (i < 0)
- {
+ i = ioctl(device_handle, PPSETMODE, &i);
+ if (i < 0) {
LOG_ERROR(" cannot set compatible mode to device");
return ERROR_JTAG_INIT_FAILED;
}
i = IEEE1284_MODE_COMPAT;
- i = ioctl(device_handle, PPNEGOT, & i);
- if (i < 0)
- {
+ i = ioctl(device_handle, PPNEGOT, &i);
+ if (i < 0) {
LOG_ERROR("cannot set compatible 1284 mode to device");
return ERROR_JTAG_INIT_FAILED;
}
#endif /* not __FreeBSD__, __FreeBSD_kernel__ */
#else /* not PARPORT_USE_PPDEV */
- if (parport_port == 0)
- {
+ if (parport_port == 0) {
parport_port = 0x378;
LOG_WARNING("No parport port specified, using default '0x378' (LPT1)");
}
LOG_DEBUG("requesting privileges for parallel port 0x%lx...", dataport);
#if PARPORT_USE_GIVEIO == 1
- if (parport_get_giveio_access() != 0)
+ if (parport_get_giveio_access() != 0) {
#else /* PARPORT_USE_GIVEIO */
- if (ioperm(dataport, 3, 1) != 0)
+ if (ioperm(dataport, 3, 1) != 0) {
#endif /* PARPORT_USE_GIVEIO */
- {
LOG_ERROR("missing privileges for direct i/o");
return ERROR_JTAG_INIT_FAILED;
}
bitbang_interface = &parport_bitbang;
- wait_states = jtag_get_speed();
-
return ERROR_OK;
}
{
parport_led(0);
- if (parport_exit)
- {
+ if (parport_exit) {
dataport_value = cable->PORT_EXIT;
parport_write_data();
}
- if (parport_cable)
- {
+ if (parport_cable) {
free(parport_cable);
parport_cable = NULL;
}
COMMAND_HANDLER(parport_handle_parport_port_command)
{
- if (CMD_ARGC == 1)
- {
+ if (CMD_ARGC == 1) {
/* only if the port wasn't overwritten by cmdline */
if (parport_port == 0)
- {
COMMAND_PARSE_NUMBER(u16, CMD_ARGV[0], parport_port);
- }
- else
- {
+ else {
LOG_ERROR("The parport port was already configured!");
return ERROR_FAIL;
}
}
- command_print(CMD_CTX, "parport port = %u", parport_port);
+ command_print(CMD_CTX, "parport port = 0x%" PRIx16 "", parport_port);
return ERROR_OK;
}
return ERROR_OK;
/* only if the cable name wasn't overwritten by cmdline */
- if (parport_cable == 0)
- {
+ if (parport_cable == 0) {
+ /* REVISIT first verify that it's listed in cables[] ... */
parport_cable = malloc(strlen(CMD_ARGV[0]) + sizeof(char));
strcpy(parport_cable, CMD_ARGV[0]);
}
+ /* REVISIT it's probably worth returning the current value ... */
+
return ERROR_OK;
}
COMMAND_HANDLER(parport_handle_write_on_exit_command)
{
if (CMD_ARGC != 1)
- {
- command_print(CMD_CTX, "usage: parport_write_on_exit <on | off>");
- return ERROR_OK;
- }
+ return ERROR_COMMAND_SYNTAX_ERROR;
COMMAND_PARSE_ON_OFF(CMD_ARGV[0], parport_exit);
}
parport_toggling_time_ns = ns;
- wait_states = jtag_get_speed();
+ retval = jtag_get_speed(&wait_states);
+ if (retval != ERROR_OK) {
+ /* if jtag_get_speed fails then the clock_mode
+ * has not been configured, this happens if parport_toggling_time is
+ * called before the adapter speed is set */
+ LOG_INFO("no parport speed set - defaulting to zero wait states");
+ wait_states = 0;
+ }
}
command_print(CMD_CTX, "parport toggling time = %" PRIu32 " ns",
static const struct command_registration parport_command_handlers[] = {
{
.name = "parport_port",
- .handler = &parport_handle_parport_port_command,
+ .handler = parport_handle_parport_port_command,
.mode = COMMAND_CONFIG,
- .help = "either the address of the I/O port "
- "or the number of the '/dev/parport' device",
- .usage = "[<port|devname>]",
+ .help = "Display the address of the I/O port (e.g. 0x378) "
+ "or the number of the '/dev/parport' device used. "
+ "If a parameter is provided, first change that port.",
+ .usage = "[port_number]",
},
{
.name = "parport_cable",
- .handler = &parport_handle_parport_cable_command,
+ .handler = parport_handle_parport_cable_command,
.mode = COMMAND_CONFIG,
- .help = "the layout of the parallel port cable "
- "used to connect to the target",
- .usage = "[<layout>]",
+ .help = "Set the layout of the parallel port cable "
+ "used to connect to the target.",
+ /* REVISIT there's no way to list layouts we know ... */
+ .usage = "[layout]",
},
{
.name = "parport_write_on_exit",
- .handler = &parport_handle_write_on_exit_command,
+ .handler = parport_handle_write_on_exit_command,
.mode = COMMAND_CONFIG,
- .help = "configure the parallel driver to write "
- "a known value to the parallel interface",
- .usage = "[<on|off>]",
+ .help = "Configure the parallel driver to write "
+ "a known value to the parallel interface on exit.",
+ .usage = "('on'|'off')",
},
{
.name = "parport_toggling_time",
- .handler = &parport_handle_parport_toggling_time_command,
+ .handler = parport_handle_parport_toggling_time_command,
.mode = COMMAND_CONFIG,
- .help = "time <ns> it takes for the hardware to toggle TCK",
- .usage = "[<ns>]",
+ .help = "Displays or assigns how many nanoseconds it "
+ "takes for the hardware to toggle TCK.",
+ .usage = "[nanoseconds]",
},
COMMAND_REGISTRATION_DONE
};
struct jtag_interface parport_interface = {
- .name = "parport",
-
- .commands = parport_command_handlers,
-
- .init = &parport_init,
- .quit = &parport_quit,
-
- .khz = &parport_khz,
- .speed_div = &parport_speed_div,
- .speed = &parport_speed,
-
- .execute_queue = &bitbang_execute_queue,
- };
+ .name = "parport",
+ .supported = DEBUG_CAP_TMS_SEQ,
+ .commands = parport_command_handlers,
+
+ .init = parport_init,
+ .quit = parport_quit,
+ .khz = parport_khz,
+ .speed_div = parport_speed_div,
+ .speed = parport_speed,
+ .execute_queue = bitbang_execute_queue,
+};