* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
+
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#if defined(__FreeBSD__) || defined(__FreeBSD_kernel__)
#include <machine/sysarch.h>
#include <machine/cpufunc.h>
-#define ioperm(startport,length,enable)\
- i386_set_ioperm((startport), (length), (enable))
+#define ioperm(startport, length, enable)\
+ i386_set_ioperm((startport), (length), (enable))
#endif /* __FreeBSD__ */
#if PARPORT_USE_PPDEV == 1
#include <windows.h>
#endif
-
/* parallel port cable description
*/
struct cable {
- char* name;
+ const char *name;
uint8_t TDO_MASK; /* status port bit containing current TDO value */
uint8_t TRST_MASK; /* data port bit for TRST */
uint8_t TMS_MASK; /* data port bit for TMS */
uint8_t LED_MASK; /* data port bit for LED */
};
-static struct cable cables[] =
-{
+static const struct cable cables[] = {
/* name tdo trst tms tck tdi srst o_inv i_inv init exit led */
{ "wiggler", 0x80, 0x10, 0x02, 0x04, 0x08, 0x01, 0x01, 0x80, 0x80, 0x80, 0x00 },
{ "wiggler2", 0x80, 0x10, 0x02, 0x04, 0x08, 0x01, 0x01, 0x80, 0x80, 0x00, 0x20 },
{ "old_amt_wiggler", 0x80, 0x01, 0x02, 0x04, 0x08, 0x10, 0x11, 0x80, 0x80, 0x80, 0x00 },
{ "arm-jtag", 0x80, 0x01, 0x02, 0x04, 0x08, 0x10, 0x01, 0x80, 0x80, 0x80, 0x00 },
{ "chameleon", 0x80, 0x00, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00 },
- { "dlc5", 0x10, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00 },
- { "triton", 0x80, 0x08, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00 },
+ { "dlc5", 0x10, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00 },
+ { "triton", 0x80, 0x08, 0x04, 0x01, 0x02, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00 },
{ "lattice", 0x40, 0x10, 0x04, 0x02, 0x01, 0x08, 0x00, 0x00, 0x18, 0x18, 0x00 },
{ "flashlink", 0x20, 0x10, 0x02, 0x01, 0x04, 0x20, 0x30, 0x20, 0x00, 0x00, 0x00 },
/* Altium Universal JTAG cable. Set the cable to Xilinx Mode and wire to target as follows:
SOFT TDI - Target SRST
*/
{ "altium", 0x10, 0x20, 0x04, 0x02, 0x01, 0x80, 0x00, 0x00, 0x10, 0x00, 0x08 },
+ { "aspo", 0x10, 0x01, 0x04, 0x08, 0x02, 0x10, 0x17, 0x00, 0x17, 0x17, 0x00 },
{ NULL, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }
};
/* configuration */
-static char* parport_cable = NULL;
+static char *parport_cable;
static uint16_t parport_port;
-static bool parport_exit = 0;
+static bool parport_exit;
static uint32_t parport_toggling_time_ns = 1000;
static int wait_states;
/* interface variables
*/
-static struct cable* cable;
-static uint8_t dataport_value = 0x0;
+static const struct cable *cable;
+static uint8_t dataport_value;
#if PARPORT_USE_PPDEV == 1
static int device_handle;
static unsigned long statusport;
#endif
-static int parport_read(void)
+static bb_value_t parport_read(void)
{
int data = 0;
#if PARPORT_USE_PPDEV == 1
- ioctl(device_handle, PPRSTATUS, & data);
+ ioctl(device_handle, PPRSTATUS, &data);
#else
data = inb(statusport);
#endif
if ((data ^ cable->INPUT_INVERT) & cable->TDO_MASK)
- return 1;
+ return BB_HIGH;
else
- return 0;
+ return BB_LOW;
}
-static __inline__ void parport_write_data(void)
+static inline void parport_write_data(void)
{
uint8_t output;
output = dataport_value ^ cable->OUTPUT_INVERT;
#endif
}
-static void parport_write(int tck, int tms, int tdi)
+static int parport_write(int tck, int tms, int tdi)
{
int i = wait_states + 1;
while (i-- > 0)
parport_write_data();
+
+ return ERROR_OK;
}
/* (1) assert or (0) deassert reset lines */
-static void parport_reset(int trst, int srst)
+static int parport_reset(int trst, int srst)
{
LOG_DEBUG("trst: %i, srst: %i", trst, srst);
dataport_value &= ~cable->SRST_MASK;
parport_write_data();
+
+ return ERROR_OK;
}
/* turn LED on parport adapter on (1) or off (0) */
-static void parport_led(int on)
+static int parport_led(int on)
{
if (on)
dataport_value |= cable->LED_MASK;
dataport_value &= ~cable->LED_MASK;
parport_write_data();
+
+ return ERROR_OK;
}
static int parport_speed(int speed)
return ERROR_OK;
}
-static int parport_khz(int khz, int* jtag_speed)
+static int parport_khz(int khz, int *jtag_speed)
{
if (khz == 0) {
LOG_DEBUG("RCLK not supported");
return ERROR_OK;
}
-static int parport_speed_div(int speed, int* khz)
+static int parport_speed_div(int speed, int *khz)
{
uint32_t denominator = (speed + 1) * parport_toggling_time_ns;
HANDLE h;
OSVERSIONINFO version;
- version.dwOSVersionInfoSize = sizeof version;
+ version.dwOSVersionInfoSize = sizeof(version);
if (!GetVersionEx(&version)) {
errno = EINVAL;
return -1;
static struct bitbang_interface parport_bitbang = {
.read = &parport_read,
.write = &parport_write,
- .reset = &parport_reset,
.blink = &parport_led,
};
static int parport_init(void)
{
- struct cable *cur_cable;
+ const struct cable *cur_cable;
#if PARPORT_USE_PPDEV == 1
char buffer[256];
- int i = 0;
#endif
cur_cable = cables;
- if ((parport_cable == NULL) || (parport_cable[0] == 0))
- {
- parport_cable = "wiggler";
+ if (!parport_cable) {
+ parport_cable = strdup("wiggler");
LOG_WARNING("No parport cable specified, using default 'wiggler'");
}
- while (cur_cable->name)
- {
- if (strcmp(cur_cable->name, parport_cable) == 0)
- {
+ while (cur_cable->name) {
+ if (strcmp(cur_cable->name, parport_cable) == 0) {
cable = cur_cable;
break;
}
cur_cable++;
}
- if (!cable)
- {
+ if (!cable) {
LOG_ERROR("No matching cable found for %s", parport_cable);
return ERROR_JTAG_INIT_FAILED;
}
dataport_value = cable->PORT_INIT;
#if PARPORT_USE_PPDEV == 1
- if (device_handle > 0)
- {
+ if (device_handle > 0) {
LOG_ERROR("device is already opened");
return ERROR_JTAG_INIT_FAILED;
}
device_handle = open(buffer, O_WRONLY);
#endif /* __FreeBSD__, __FreeBSD_kernel__ */
- if (device_handle < 0)
- {
+ if (device_handle < 0) {
int err = errno;
LOG_ERROR("cannot open device. check it exists and that user read and write rights are set. errno=%d", err);
return ERROR_JTAG_INIT_FAILED;
LOG_DEBUG("...open");
#if !defined(__FreeBSD__) && !defined(__FreeBSD_kernel__)
- i = ioctl(device_handle, PPCLAIM);
- if (i < 0)
- {
+ int i = ioctl(device_handle, PPCLAIM);
+
+ if (i < 0) {
LOG_ERROR("cannot claim device");
return ERROR_JTAG_INIT_FAILED;
}
i = PARPORT_MODE_COMPAT;
- i= ioctl(device_handle, PPSETMODE, & i);
- if (i < 0)
- {
+ i = ioctl(device_handle, PPSETMODE, &i);
+ if (i < 0) {
LOG_ERROR(" cannot set compatible mode to device");
return ERROR_JTAG_INIT_FAILED;
}
i = IEEE1284_MODE_COMPAT;
- i = ioctl(device_handle, PPNEGOT, & i);
- if (i < 0)
- {
+ i = ioctl(device_handle, PPNEGOT, &i);
+ if (i < 0) {
LOG_ERROR("cannot set compatible 1284 mode to device");
return ERROR_JTAG_INIT_FAILED;
}
#endif /* not __FreeBSD__, __FreeBSD_kernel__ */
#else /* not PARPORT_USE_PPDEV */
- if (parport_port == 0)
- {
+ if (parport_port == 0) {
parport_port = 0x378;
LOG_WARNING("No parport port specified, using default '0x378' (LPT1)");
}
LOG_DEBUG("requesting privileges for parallel port 0x%lx...", dataport);
#if PARPORT_USE_GIVEIO == 1
- if (parport_get_giveio_access() != 0)
+ if (parport_get_giveio_access() != 0) {
#else /* PARPORT_USE_GIVEIO */
- if (ioperm(dataport, 3, 1) != 0)
+ if (ioperm(dataport, 3, 1) != 0) {
#endif /* PARPORT_USE_GIVEIO */
- {
LOG_ERROR("missing privileges for direct i/o");
return ERROR_JTAG_INIT_FAILED;
}
#endif /* PARPORT_USE_PPDEV */
- parport_reset(0, 0);
- parport_write(0, 0, 0);
- parport_led(1);
+ if (parport_reset(0, 0) != ERROR_OK)
+ return ERROR_FAIL;
+ if (parport_write(0, 0, 0) != ERROR_OK)
+ return ERROR_FAIL;
+ if (parport_led(1) != ERROR_OK)
+ return ERROR_FAIL;
bitbang_interface = &parport_bitbang;
- wait_states = jtag_get_speed();
-
return ERROR_OK;
}
static int parport_quit(void)
{
- parport_led(0);
+ if (parport_led(0) != ERROR_OK)
+ return ERROR_FAIL;
- if (parport_exit)
- {
+ if (parport_exit) {
dataport_value = cable->PORT_EXIT;
parport_write_data();
}
- if (parport_cable)
- {
- free(parport_cable);
- parport_cable = NULL;
- }
+ free(parport_cable);
+ parport_cable = NULL;
return ERROR_OK;
}
COMMAND_HANDLER(parport_handle_parport_port_command)
{
- if (CMD_ARGC == 1)
- {
+ if (CMD_ARGC == 1) {
/* only if the port wasn't overwritten by cmdline */
if (parport_port == 0)
- {
COMMAND_PARSE_NUMBER(u16, CMD_ARGV[0], parport_port);
- }
- else
- {
+ else {
LOG_ERROR("The parport port was already configured!");
return ERROR_FAIL;
}
}
- command_print(CMD_CTX, "parport port = 0x%" PRIx16 "", parport_port);
+ command_print(CMD, "parport port = 0x%" PRIx16 "", parport_port);
return ERROR_OK;
}
return ERROR_OK;
/* only if the cable name wasn't overwritten by cmdline */
- if (parport_cable == 0)
- {
+ if (parport_cable == 0) {
/* REVISIT first verify that it's listed in cables[] ... */
parport_cable = malloc(strlen(CMD_ARGV[0]) + sizeof(char));
strcpy(parport_cable, CMD_ARGV[0]);
COMMAND_HANDLER(parport_handle_write_on_exit_command)
{
if (CMD_ARGC != 1)
- {
- command_print(CMD_CTX, "usage: parport_write_on_exit <on | off>");
- return ERROR_OK;
- }
+ return ERROR_COMMAND_SYNTAX_ERROR;
COMMAND_PARSE_ON_OFF(CMD_ARGV[0], parport_exit);
uint32_t ns;
int retval = parse_u32(CMD_ARGV[0], &ns);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
if (ns == 0) {
}
parport_toggling_time_ns = ns;
- wait_states = jtag_get_speed();
+ retval = jtag_get_speed(&wait_states);
+ if (retval != ERROR_OK) {
+ /* if jtag_get_speed fails then the clock_mode
+ * has not been configured, this happens if parport_toggling_time is
+ * called before the adapter speed is set */
+ LOG_INFO("no parport speed set - defaulting to zero wait states");
+ wait_states = 0;
+ }
}
- command_print(CMD_CTX, "parport toggling time = %" PRIu32 " ns",
+ command_print(CMD, "parport toggling time = %" PRIu32 " ns",
parport_toggling_time_ns);
return ERROR_OK;
}
-static const struct command_registration parport_command_handlers[] = {
+static const struct command_registration parport_subcommand_handlers[] = {
{
- .name = "parport_port",
+ .name = "port",
.handler = parport_handle_parport_port_command,
.mode = COMMAND_CONFIG,
.help = "Display the address of the I/O port (e.g. 0x378) "
.usage = "[port_number]",
},
{
- .name = "parport_cable",
+ .name = "cable",
.handler = parport_handle_parport_cable_command,
.mode = COMMAND_CONFIG,
.help = "Set the layout of the parallel port cable "
.usage = "[layout]",
},
{
- .name = "parport_write_on_exit",
+ .name = "write_on_exit",
.handler = parport_handle_write_on_exit_command,
.mode = COMMAND_CONFIG,
.help = "Configure the parallel driver to write "
.usage = "('on'|'off')",
},
{
- .name = "parport_toggling_time",
+ .name = "toggling_time",
.handler = parport_handle_parport_toggling_time_command,
.mode = COMMAND_CONFIG,
.help = "Displays or assigns how many nanoseconds it "
COMMAND_REGISTRATION_DONE
};
-struct jtag_interface parport_interface = {
+static const struct command_registration parport_command_handlers[] = {
+ {
+ .name = "parport",
+ .mode = COMMAND_ANY,
+ .help = "perform parport management",
+ .chain = parport_subcommand_handlers,
+ .usage = "",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
+static struct jtag_interface parport_interface = {
+ .supported = DEBUG_CAP_TMS_SEQ,
+ .execute_queue = bitbang_execute_queue,
+};
+
+struct adapter_driver parport_adapter_driver = {
.name = "parport",
+ .transports = jtag_only,
.commands = parport_command_handlers,
.init = parport_init,
.quit = parport_quit,
+ .reset = parport_reset,
+ .speed = parport_speed,
.khz = parport_khz,
.speed_div = parport_speed_div,
- .speed = parport_speed,
- .execute_queue = bitbang_execute_queue,
+
+ .jtag_ops = &parport_interface,
};