+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
/***************************************************************************
* Copyright (C) 2012 by Creative Product Design, marc @ cpdesign.com.au *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
/* 2014-12: Addition of the SWD protocol support is based on the initial work
*
* A gpio is required for tck, tms, tdi and tdo. One or both of srst and trst
* must be also be specified. The required jtag gpios are specified via the
- * sysfsgpio_jtag_nums command or the relevant sysfsgpio_XXX_num commang.
+ * sysfsgpio_jtag_nums command or the relevant sysfsgpio_XXX_num commands.
* The srst and trst gpios are set via the sysfsgpio_srst_num and
* sysfsgpio_trst_num respectively. GPIO numbering follows the kernel
* convention of starting from 0.
#include <helper/time_support.h>
#include <jtag/interface.h>
+#include <transport/transport.h>
#include "bitbang.h"
/*
LOG_WARNING("gpio %d is already exported", gpio);
} else {
LOG_ERROR("Couldn't export gpio %d", gpio);
- perror("sysfsgpio: ");
+ LOG_ERROR("sysfsgpio: %s", strerror(errno));
return ERROR_FAIL;
}
}
}
if (ret < 0) {
LOG_ERROR("Couldn't set direction for gpio %d", gpio);
- perror("sysfsgpio: ");
+ LOG_ERROR("sysfsgpio: %s", strerror(errno));
unexport_sysfs_gpio(gpio);
return ERROR_FAIL;
}
}
if (ret < 0) {
LOG_ERROR("Couldn't open value for gpio %d", gpio);
- perror("sysfsgpio: ");
+ LOG_ERROR("sysfsgpio: %s", strerror(errno));
unexport_sysfs_gpio(gpio);
}
ret = open_write_close(buf, is_output ? "high" : "in");
if (ret < 0) {
LOG_ERROR("Couldn't set direction for gpio %d", swdio_gpio);
- perror("sysfsgpio: ");
+ LOG_ERROR("sysfsgpio: %s", strerror(errno));
}
last_stored = false;
return ERROR_OK;
}
-static const struct command_registration sysfsgpio_command_handlers[] = {
+static const struct command_registration sysfsgpio_subcommand_handlers[] = {
{
- .name = "sysfsgpio_jtag_nums",
+ .name = "jtag_nums",
.handler = &sysfsgpio_handle_jtag_gpionums,
.mode = COMMAND_CONFIG,
.help = "gpio numbers for tck, tms, tdi, tdo. (in that order)",
.usage = "[tck tms tdi tdo]",
},
{
- .name = "sysfsgpio_tck_num",
+ .name = "tck_num",
.handler = &sysfsgpio_handle_jtag_gpionum_tck,
.mode = COMMAND_CONFIG,
.help = "gpio number for tck.",
.usage = "[tck]",
},
{
- .name = "sysfsgpio_tms_num",
+ .name = "tms_num",
.handler = &sysfsgpio_handle_jtag_gpionum_tms,
.mode = COMMAND_CONFIG,
.help = "gpio number for tms.",
.usage = "[tms]",
},
{
- .name = "sysfsgpio_tdo_num",
+ .name = "tdo_num",
.handler = &sysfsgpio_handle_jtag_gpionum_tdo,
.mode = COMMAND_CONFIG,
.help = "gpio number for tdo.",
.usage = "[tdo]",
},
{
- .name = "sysfsgpio_tdi_num",
+ .name = "tdi_num",
.handler = &sysfsgpio_handle_jtag_gpionum_tdi,
.mode = COMMAND_CONFIG,
.help = "gpio number for tdi.",
.usage = "[tdi]",
},
{
- .name = "sysfsgpio_srst_num",
+ .name = "srst_num",
.handler = &sysfsgpio_handle_jtag_gpionum_srst,
.mode = COMMAND_CONFIG,
.help = "gpio number for srst.",
.usage = "[srst]",
},
{
- .name = "sysfsgpio_trst_num",
+ .name = "trst_num",
.handler = &sysfsgpio_handle_jtag_gpionum_trst,
.mode = COMMAND_CONFIG,
.help = "gpio number for trst.",
.usage = "[trst]",
},
{
- .name = "sysfsgpio_swd_nums",
+ .name = "swd_nums",
.handler = &sysfsgpio_handle_swd_gpionums,
.mode = COMMAND_CONFIG,
.help = "gpio numbers for swclk, swdio. (in that order)",
.usage = "[swclk swdio]",
},
{
- .name = "sysfsgpio_swclk_num",
+ .name = "swclk_num",
.handler = &sysfsgpio_handle_swd_gpionum_swclk,
.mode = COMMAND_CONFIG,
.help = "gpio number for swclk.",
.usage = "[swclk]",
},
{
- .name = "sysfsgpio_swdio_num",
+ .name = "swdio_num",
.handler = &sysfsgpio_handle_swd_gpionum_swdio,
.mode = COMMAND_CONFIG,
.help = "gpio number for swdio.",
COMMAND_REGISTRATION_DONE
};
+static const struct command_registration sysfsgpio_command_handlers[] = {
+ {
+ .name = "sysfsgpio",
+ .mode = COMMAND_ANY,
+ .help = "perform sysfsgpio management",
+ .chain = sysfsgpio_subcommand_handlers,
+ .usage = "",
+ },
+ COMMAND_REGISTRATION_DONE
+};
+
static int sysfsgpio_init(void);
static int sysfsgpio_quit(void);
static void cleanup_all_fds(void)
{
- cleanup_fd(tck_fd, tck_gpio);
- cleanup_fd(tms_fd, tms_gpio);
- cleanup_fd(tdi_fd, tdi_gpio);
- cleanup_fd(tdo_fd, tdo_gpio);
- cleanup_fd(trst_fd, trst_gpio);
+ if (transport_is_jtag()) {
+ cleanup_fd(tck_fd, tck_gpio);
+ cleanup_fd(tms_fd, tms_gpio);
+ cleanup_fd(tdi_fd, tdi_gpio);
+ cleanup_fd(tdo_fd, tdo_gpio);
+ cleanup_fd(trst_fd, trst_gpio);
+ }
+ if (transport_is_swd()) {
+ cleanup_fd(swclk_fd, swclk_gpio);
+ cleanup_fd(swdio_fd, swdio_gpio);
+ }
cleanup_fd(srst_fd, srst_gpio);
- cleanup_fd(swclk_fd, swclk_gpio);
- cleanup_fd(swdio_fd, swdio_gpio);
}
static bool sysfsgpio_jtag_mode_possible(void)
LOG_INFO("SysfsGPIO JTAG/SWD bitbang driver");
- if (sysfsgpio_jtag_mode_possible()) {
- if (sysfsgpio_swd_mode_possible())
- LOG_INFO("JTAG and SWD modes enabled");
- else
- LOG_INFO("JTAG only mode enabled (specify swclk and swdio gpio to add SWD mode)");
- } else if (sysfsgpio_swd_mode_possible()) {
- LOG_INFO("SWD only mode enabled (specify tck, tms, tdi and tdo gpios to add JTAG mode)");
- } else {
- LOG_ERROR("Require tck, tms, tdi and tdo gpios for JTAG mode and/or swclk and swdio gpio for SWD mode");
- return ERROR_JTAG_INIT_FAILED;
- }
-
-
/*
* Configure TDO as an input, and TDI, TCK, TMS, TRST, SRST
* as outputs. Drive TDI and TCK low, and TMS/TRST/SRST high.
* For SWD, SWCLK and SWDIO are configures as output high.
*/
- if (tck_gpio >= 0) {
+
+ if (transport_is_jtag()) {
+ if (!sysfsgpio_jtag_mode_possible()) {
+ LOG_ERROR("Require tck, tms, tdi and tdo gpios for JTAG mode");
+ return ERROR_JTAG_INIT_FAILED;
+ }
+
tck_fd = setup_sysfs_gpio(tck_gpio, 1, 0);
if (tck_fd < 0)
goto out_error;
- }
- if (tms_gpio >= 0) {
tms_fd = setup_sysfs_gpio(tms_gpio, 1, 1);
if (tms_fd < 0)
goto out_error;
- }
- if (tdi_gpio >= 0) {
tdi_fd = setup_sysfs_gpio(tdi_gpio, 1, 0);
if (tdi_fd < 0)
goto out_error;
- }
- if (tdo_gpio >= 0) {
tdo_fd = setup_sysfs_gpio(tdo_gpio, 0, 0);
if (tdo_fd < 0)
goto out_error;
- }
- /* assume active low*/
- if (trst_gpio >= 0) {
- trst_fd = setup_sysfs_gpio(trst_gpio, 1, 1);
- if (trst_fd < 0)
- goto out_error;
+ /* assume active low*/
+ if (trst_gpio >= 0) {
+ trst_fd = setup_sysfs_gpio(trst_gpio, 1, 1);
+ if (trst_fd < 0)
+ goto out_error;
+ }
}
- /* assume active low*/
- if (srst_gpio >= 0) {
- srst_fd = setup_sysfs_gpio(srst_gpio, 1, 1);
- if (srst_fd < 0)
- goto out_error;
- }
+ if (transport_is_swd()) {
+ if (!sysfsgpio_swd_mode_possible()) {
+ LOG_ERROR("Require swclk and swdio gpio for SWD mode");
+ return ERROR_JTAG_INIT_FAILED;
+ }
- if (swclk_gpio >= 0) {
swclk_fd = setup_sysfs_gpio(swclk_gpio, 1, 0);
if (swclk_fd < 0)
goto out_error;
- }
- if (swdio_gpio >= 0) {
swdio_fd = setup_sysfs_gpio(swdio_gpio, 1, 0);
if (swdio_fd < 0)
goto out_error;
}
+ /* assume active low*/
+ if (srst_gpio >= 0) {
+ srst_fd = setup_sysfs_gpio(srst_gpio, 1, 1);
+ if (srst_fd < 0)
+ goto out_error;
+ }
+
return ERROR_OK;
out_error: