target/armv7m_trace: Improve SWO frequency auto-detection
[openocd.git] / src / jtag / hla / hla_interface.c
index 21cd06fa733da9b37eac286c954d90864045a7cf..7d9dea05e36f2ae44723b1ae5aeb62e75b89d30d 100644 (file)
@@ -16,9 +16,7 @@
  *   GNU General Public License for more details.                          *
  *                                                                         *
  *   You should have received a copy of the GNU General Public License     *
- *   along with this program; if not, write to the                         *
- *   Free Software Foundation, Inc.,                                       *
- *   51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.           *
+ *   along with this program.  If not, see <http://www.gnu.org/licenses/>. *
  ***************************************************************************/
 
 #ifdef HAVE_CONFIG_H
@@ -37,7 +35,7 @@
 
 #include <target/target.h>
 
-static struct hl_interface_s hl_if = { {0, 0, 0, 0, 0, HL_TRANSPORT_UNKNOWN, false, NULL, 0, -1}, 0, 0 };
+static struct hl_interface_s hl_if = { {0, 0, { 0 }, { 0 }, 0, HL_TRANSPORT_UNKNOWN, false, -1}, 0, 0 };
 
 int hl_interface_open(enum hl_transports tr)
 {
@@ -118,11 +116,13 @@ static int hl_interface_quit(void)
 {
        LOG_DEBUG("hl_interface_quit");
 
-       if (hl_if.param.trace_f) {
-               fclose(hl_if.param.trace_f);
-               hl_if.param.trace_f = NULL;
-       }
-       hl_if.param.trace_source_hz = 0;
+       if (hl_if.layout->api->close)
+               hl_if.layout->api->close(hl_if.handle);
+
+       jtag_command_queue_reset();
+
+       free((void *)hl_if.param.device_desc);
+       free((void *)hl_if.param.serial);
 
        return ERROR_OK;
 }
@@ -191,6 +191,29 @@ int hl_interface_override_target(const char **targetname)
        return ERROR_FAIL;
 }
 
+int hl_interface_config_trace(bool enabled, enum tpiu_pin_protocol pin_protocol,
+               uint32_t port_size, unsigned int *trace_freq,
+               unsigned int traceclkin_freq, uint16_t *prescaler)
+{
+       if (hl_if.layout->api->config_trace)
+               return hl_if.layout->api->config_trace(hl_if.handle, enabled,
+                       pin_protocol, port_size, trace_freq, traceclkin_freq, prescaler);
+       else if (enabled) {
+               LOG_ERROR("The selected interface does not support tracing");
+               return ERROR_FAIL;
+       }
+
+       return ERROR_OK;
+}
+
+int hl_interface_poll_trace(uint8_t *buf, size_t *size)
+{
+       if (hl_if.layout->api->poll_trace)
+               return hl_if.layout->api->poll_trace(hl_if.handle, buf, size);
+
+       return ERROR_FAIL;
+}
+
 COMMAND_HANDLER(hl_interface_handle_device_desc_command)
 {
        LOG_DEBUG("hl_interface_handle_device_desc_command");
@@ -247,40 +270,27 @@ COMMAND_HANDLER(hl_interface_handle_layout_command)
 
 COMMAND_HANDLER(hl_interface_handle_vid_pid_command)
 {
-       LOG_DEBUG("hl_interface_handle_vid_pid_command");
-
-       if (CMD_ARGC != 2) {
-               LOG_WARNING("ignoring extra IDs in hl_vid_pid (maximum is 1 pair)");
-               return ERROR_COMMAND_SYNTAX_ERROR;
+       if (CMD_ARGC > HLA_MAX_USB_IDS * 2) {
+               LOG_WARNING("ignoring extra IDs in hla_vid_pid "
+                       "(maximum is %d pairs)", HLA_MAX_USB_IDS);
+               CMD_ARGC = HLA_MAX_USB_IDS * 2;
        }
-
-       COMMAND_PARSE_NUMBER(u16, CMD_ARGV[0], hl_if.param.vid);
-       COMMAND_PARSE_NUMBER(u16, CMD_ARGV[1], hl_if.param.pid);
-
-       return ERROR_OK;
-}
-
-COMMAND_HANDLER(interface_handle_trace_command)
-{
-       FILE *f = NULL;
-       unsigned source_hz;
-
-       if ((CMD_ARGC < 1) || (CMD_ARGC > 2))
-               return ERROR_COMMAND_SYNTAX_ERROR;
-
-       COMMAND_PARSE_NUMBER(uint, CMD_ARGV[0], source_hz);
-       if (source_hz == 0) {
+       if (CMD_ARGC < 2 || (CMD_ARGC & 1)) {
+               LOG_WARNING("incomplete hla_vid_pid configuration directive");
                return ERROR_COMMAND_SYNTAX_ERROR;
        }
 
-       if (CMD_ARGC == 2) {
-               f = fopen(CMD_ARGV[1], "a");
-               if (!f)
-                       return ERROR_COMMAND_SYNTAX_ERROR;
+       unsigned i;
+       for (i = 0; i < CMD_ARGC; i += 2) {
+               COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i], hl_if.param.vid[i / 2]);
+               COMMAND_PARSE_NUMBER(u16, CMD_ARGV[i + 1], hl_if.param.pid[i / 2]);
        }
 
-       hl_if.param.trace_f = f;
-       hl_if.param.trace_source_hz = source_hz;
+       /*
+        * Explicitly terminate, in case there are multiple instances of
+        * hla_vid_pid.
+        */
+       hl_if.param.vid[i / 2] = hl_if.param.pid[i / 2] = 0;
 
        return ERROR_OK;
 }
@@ -330,13 +340,6 @@ static const struct command_registration hl_interface_command_handlers[] = {
         .usage = "(vid pid)* ",
         },
         {
-        .name = "trace",
-        .handler = &interface_handle_trace_command,
-        .mode = COMMAND_CONFIG,
-        .help = "configure trace reception",
-        .usage = "source_lock_hz [destination_path]",
-        },
-        {
         .name = "hla_command",
         .handler = &interface_handle_hla_command,
         .mode = COMMAND_EXEC,
@@ -357,4 +360,6 @@ struct jtag_interface hl_interface = {
        .speed = &hl_interface_speed,
        .khz = &hl_interface_khz,
        .speed_div = &hl_interface_speed_div,
+       .config_trace = &hl_interface_config_trace,
+       .poll_trace = &hl_interface_poll_trace,
 };

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)