cortex_m: implement hit_watchpoint function
[openocd.git] / src / target / aarch64.c
index 8d23bcabc631ac43cdc02957414c3d8dfe6e19d3..4ba92c8a0edf86403c301612687173ed76fda50e 100644 (file)
@@ -133,6 +133,7 @@ static int aarch64_mmu_modify(struct target *target, int enable)
        struct aarch64_common *aarch64 = target_to_aarch64(target);
        struct armv8_common *armv8 = &aarch64->armv8_common;
        int retval = ERROR_OK;
+       enum arm_mode target_mode = ARM_MODE_ANY;
        uint32_t instr = 0;
 
        if (enable) {
@@ -158,6 +159,8 @@ static int aarch64_mmu_modify(struct target *target, int enable)
 
        switch (armv8->arm.core_mode) {
        case ARMV8_64_EL0T:
+               target_mode = ARMV8_64_EL1H;
+               /* fall through */
        case ARMV8_64_EL1T:
        case ARMV8_64_EL1H:
                instr = ARMV8_MSR_GP(SYSTEM_SCTLR_EL1, 0);
@@ -184,9 +187,15 @@ static int aarch64_mmu_modify(struct target *target, int enable)
                LOG_DEBUG("unknown cpu state 0x%x", armv8->arm.core_mode);
                break;
        }
+       if (target_mode != ARM_MODE_ANY)
+               armv8_dpm_modeswitch(&armv8->dpm, target_mode);
 
        retval = armv8->dpm.instr_write_data_r0(&armv8->dpm, instr,
                                aarch64->system_control_reg_curr);
+
+       if (target_mode != ARM_MODE_ANY)
+               armv8_dpm_modeswitch(&armv8->dpm, ARM_MODE_ANY);
+
        return retval;
 }
 
@@ -1651,7 +1660,6 @@ static int aarch64_add_hybrid_breakpoint(struct target *target,
        return aarch64_set_hybrid_breakpoint(target, breakpoint);       /* ??? */
 }
 
-
 static int aarch64_remove_breakpoint(struct target *target, struct breakpoint *breakpoint)
 {
        struct aarch64_common *aarch64 = target_to_aarch64(target);
@@ -1673,26 +1681,307 @@ static int aarch64_remove_breakpoint(struct target *target, struct breakpoint *b
        return ERROR_OK;
 }
 
+/* Setup hardware Watchpoint Register Pair */
+static int aarch64_set_watchpoint(struct target *target,
+       struct watchpoint *watchpoint)
+{
+       int retval;
+       int wp_i = 0;
+       uint32_t control, offset, length;
+       struct aarch64_common *aarch64 = target_to_aarch64(target);
+       struct armv8_common *armv8 = &aarch64->armv8_common;
+       struct aarch64_brp *wp_list = aarch64->wp_list;
+
+       if (watchpoint->set) {
+               LOG_WARNING("watchpoint already set");
+               return ERROR_OK;
+       }
+
+       while (wp_list[wp_i].used && (wp_i < aarch64->wp_num))
+               wp_i++;
+       if (wp_i >= aarch64->wp_num) {
+               LOG_ERROR("ERROR Can not find free Watchpoint Register Pair");
+               return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+       }
+
+       control = (1 << 0)      /* enable */
+               | (3 << 1)      /* both user and privileged access */
+               | (1 << 13);    /* higher mode control */
+
+       switch (watchpoint->rw) {
+       case WPT_READ:
+               control |= 1 << 3;
+               break;
+       case WPT_WRITE:
+               control |= 2 << 3;
+               break;
+       case WPT_ACCESS:
+               control |= 3 << 3;
+               break;
+       }
+
+       /* Match up to 8 bytes. */
+       offset = watchpoint->address & 7;
+       length = watchpoint->length;
+       if (offset + length > sizeof(uint64_t)) {
+               length = sizeof(uint64_t) - offset;
+               LOG_WARNING("Adjust watchpoint match inside 8-byte boundary");
+       }
+       for (; length > 0; offset++, length--)
+               control |= (1 << offset) << 5;
+
+       wp_list[wp_i].value = watchpoint->address & 0xFFFFFFFFFFFFFFF8ULL;
+       wp_list[wp_i].control = control;
+
+       retval = aarch64_dap_write_memap_register_u32(target, armv8->debug_base
+                       + CPUV8_DBG_WVR_BASE + 16 * wp_list[wp_i].BRPn,
+                       (uint32_t)(wp_list[wp_i].value & 0xFFFFFFFF));
+       if (retval != ERROR_OK)
+               return retval;
+       retval = aarch64_dap_write_memap_register_u32(target, armv8->debug_base
+                       + CPUV8_DBG_WVR_BASE + 4 + 16 * wp_list[wp_i].BRPn,
+                       (uint32_t)(wp_list[wp_i].value >> 32));
+       if (retval != ERROR_OK)
+               return retval;
+
+       retval = aarch64_dap_write_memap_register_u32(target, armv8->debug_base
+                       + CPUV8_DBG_WCR_BASE + 16 * wp_list[wp_i].BRPn,
+                       control);
+       if (retval != ERROR_OK)
+               return retval;
+       LOG_DEBUG("wp %i control 0x%0" PRIx32 " value 0x%" TARGET_PRIxADDR, wp_i,
+               wp_list[wp_i].control, wp_list[wp_i].value);
+
+       /* Ensure that halting debug mode is enable */
+       retval = aarch64_set_dscr_bits(target, DSCR_HDE, DSCR_HDE);
+       if (retval != ERROR_OK) {
+               LOG_DEBUG("Failed to set DSCR.HDE");
+               return retval;
+       }
+
+       wp_list[wp_i].used = 1;
+       watchpoint->set = wp_i + 1;
+
+       return ERROR_OK;
+}
+
+/* Clear hardware Watchpoint Register Pair */
+static int aarch64_unset_watchpoint(struct target *target,
+       struct watchpoint *watchpoint)
+{
+       int retval, wp_i;
+       struct aarch64_common *aarch64 = target_to_aarch64(target);
+       struct armv8_common *armv8 = &aarch64->armv8_common;
+       struct aarch64_brp *wp_list = aarch64->wp_list;
+
+       if (!watchpoint->set) {
+               LOG_WARNING("watchpoint not set");
+               return ERROR_OK;
+       }
+
+       wp_i = watchpoint->set - 1;
+       if ((wp_i < 0) || (wp_i >= aarch64->wp_num)) {
+               LOG_DEBUG("Invalid WP number in watchpoint");
+               return ERROR_OK;
+       }
+       LOG_DEBUG("rwp %i control 0x%0" PRIx32 " value 0x%0" PRIx64, wp_i,
+               wp_list[wp_i].control, wp_list[wp_i].value);
+       wp_list[wp_i].used = 0;
+       wp_list[wp_i].value = 0;
+       wp_list[wp_i].control = 0;
+       retval = aarch64_dap_write_memap_register_u32(target, armv8->debug_base
+                       + CPUV8_DBG_WCR_BASE + 16 * wp_list[wp_i].BRPn,
+                       wp_list[wp_i].control);
+       if (retval != ERROR_OK)
+               return retval;
+       retval = aarch64_dap_write_memap_register_u32(target, armv8->debug_base
+                       + CPUV8_DBG_WVR_BASE + 16 * wp_list[wp_i].BRPn,
+                       wp_list[wp_i].value);
+       if (retval != ERROR_OK)
+               return retval;
+
+       retval = aarch64_dap_write_memap_register_u32(target, armv8->debug_base
+                       + CPUV8_DBG_WVR_BASE + 4 + 16 * wp_list[wp_i].BRPn,
+                       (uint32_t)wp_list[wp_i].value);
+       if (retval != ERROR_OK)
+               return retval;
+       watchpoint->set = 0;
+
+       return ERROR_OK;
+}
+
+static int aarch64_add_watchpoint(struct target *target,
+       struct watchpoint *watchpoint)
+{
+       int retval;
+       struct aarch64_common *aarch64 = target_to_aarch64(target);
+
+       if (aarch64->wp_num_available < 1) {
+               LOG_INFO("no hardware watchpoint available");
+               return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+       }
+
+       retval = aarch64_set_watchpoint(target, watchpoint);
+       if (retval == ERROR_OK)
+               aarch64->wp_num_available--;
+
+       return retval;
+}
+
+static int aarch64_remove_watchpoint(struct target *target,
+       struct watchpoint *watchpoint)
+{
+       struct aarch64_common *aarch64 = target_to_aarch64(target);
+
+       if (watchpoint->set) {
+               aarch64_unset_watchpoint(target, watchpoint);
+               aarch64->wp_num_available++;
+       }
+
+       return ERROR_OK;
+}
+
+/**
+ * find out which watchpoint hits
+ * get exception address and compare the address to watchpoints
+ */
+int aarch64_hit_watchpoint(struct target *target,
+       struct watchpoint **hit_watchpoint)
+{
+       if (target->debug_reason != DBG_REASON_WATCHPOINT)
+               return ERROR_FAIL;
+
+       struct armv8_common *armv8 = target_to_armv8(target);
+
+       uint64_t exception_address;
+       struct watchpoint *wp;
+
+       exception_address = armv8->dpm.wp_pc;
+
+       if (exception_address == 0xFFFFFFFF)
+               return ERROR_FAIL;
+
+       /**********************************************************/
+       /* see if a watchpoint address matches a value read from  */
+       /* the EDWAR register. Testing shows that on some ARM CPUs*/
+       /* the EDWAR value needs to have 8 added to it so we add  */
+       /* that check as well not sure if that is a core bug)     */
+       /**********************************************************/
+       for (exception_address = armv8->dpm.wp_pc; exception_address <= (armv8->dpm.wp_pc + 8);
+               exception_address += 8) {
+               for (wp = target->watchpoints; wp; wp = wp->next) {
+                       if ((exception_address >= wp->address) && (exception_address < (wp->address + wp->length))) {
+                               *hit_watchpoint = wp;
+                               if (exception_address != armv8->dpm.wp_pc)
+                                       LOG_DEBUG("watchpoint hit required EDWAR to be increased by 8");
+                               return ERROR_OK;
+                       }
+               }
+       }
+
+       return ERROR_FAIL;
+}
+
 /*
  * Cortex-A8 Reset functions
  */
 
+static int aarch64_enable_reset_catch(struct target *target, bool enable)
+{
+       struct armv8_common *armv8 = target_to_armv8(target);
+       uint32_t edecr;
+       int retval;
+
+       retval = mem_ap_read_atomic_u32(armv8->debug_ap,
+                       armv8->debug_base + CPUV8_DBG_EDECR, &edecr);
+       LOG_DEBUG("EDECR = 0x%08" PRIx32 ", enable=%d", edecr, enable);
+       if (retval != ERROR_OK)
+               return retval;
+
+       if (enable)
+               edecr |= ECR_RCE;
+       else
+               edecr &= ~ECR_RCE;
+
+       return mem_ap_write_atomic_u32(armv8->debug_ap,
+                       armv8->debug_base + CPUV8_DBG_EDECR, edecr);
+}
+
+static int aarch64_clear_reset_catch(struct target *target)
+{
+       struct armv8_common *armv8 = target_to_armv8(target);
+       uint32_t edesr;
+       int retval;
+       bool was_triggered;
+
+       /* check if Reset Catch debug event triggered as expected */
+       retval = mem_ap_read_atomic_u32(armv8->debug_ap,
+               armv8->debug_base + CPUV8_DBG_EDESR, &edesr);
+       if (retval != ERROR_OK)
+               return retval;
+
+       was_triggered = !!(edesr & ESR_RC);
+       LOG_DEBUG("Reset Catch debug event %s",
+                       was_triggered ? "triggered" : "NOT triggered!");
+
+       if (was_triggered) {
+               /* clear pending Reset Catch debug event */
+               edesr &= ~ESR_RC;
+               retval = mem_ap_write_atomic_u32(armv8->debug_ap,
+                       armv8->debug_base + CPUV8_DBG_EDESR, edesr);
+               if (retval != ERROR_OK)
+                       return retval;
+       }
+
+       return ERROR_OK;
+}
+
 static int aarch64_assert_reset(struct target *target)
 {
        struct armv8_common *armv8 = target_to_armv8(target);
+       enum reset_types reset_config = jtag_get_reset_config();
+       int retval;
 
        LOG_DEBUG(" ");
 
-       /* FIXME when halt is requested, make it work somehow... */
-
        /* Issue some kind of warm reset. */
        if (target_has_event_action(target, TARGET_EVENT_RESET_ASSERT))
                target_handle_event(target, TARGET_EVENT_RESET_ASSERT);
-       else if (jtag_get_reset_config() & RESET_HAS_SRST) {
+       else if (reset_config & RESET_HAS_SRST) {
+               bool srst_asserted = false;
+
+               if (target->reset_halt) {
+                       if (target_was_examined(target)) {
+
+                               if (reset_config & RESET_SRST_NO_GATING) {
+                                       /*
+                                        * SRST needs to be asserted *before* Reset Catch
+                                        * debug event can be set up.
+                                        */
+                                       adapter_assert_reset();
+                                       srst_asserted = true;
+
+                                       /* make sure to clear all sticky errors */
+                                       mem_ap_write_atomic_u32(armv8->debug_ap,
+                                                       armv8->debug_base + CPUV8_DBG_DRCR, DRCR_CSE);
+                               }
+
+                               /* set up Reset Catch debug event to halt the CPU after reset */
+                               retval = aarch64_enable_reset_catch(target, true);
+                               if (retval != ERROR_OK)
+                                       LOG_WARNING("%s: Error enabling Reset Catch debug event; the CPU will not halt immediately after reset!",
+                                                       target_name(target));
+                       } else {
+                               LOG_WARNING("%s: Target not examined, will not halt immediately after reset!",
+                                               target_name(target));
+                       }
+               }
+
                /* REVISIT handle "pulls" cases, if there's
                 * hardware that needs them to work.
                 */
-               adapter_assert_reset();
+               if (!srst_asserted)
+                       adapter_assert_reset();
        } else {
                LOG_ERROR("%s: how to reset?", target_name(target));
                return ERROR_FAIL;
@@ -1721,23 +2010,37 @@ static int aarch64_deassert_reset(struct target *target)
        if (!target_was_examined(target))
                return ERROR_OK;
 
-       retval = aarch64_poll(target);
+       retval = aarch64_init_debug_access(target);
        if (retval != ERROR_OK)
                return retval;
 
-       retval = aarch64_init_debug_access(target);
+       retval = aarch64_poll(target);
        if (retval != ERROR_OK)
                return retval;
 
        if (target->reset_halt) {
+               /* clear pending Reset Catch debug event */
+               retval = aarch64_clear_reset_catch(target);
+               if (retval != ERROR_OK)
+                       LOG_WARNING("%s: Clearing Reset Catch debug event failed",
+                                       target_name(target));
+
+               /* disable Reset Catch debug event */
+               retval = aarch64_enable_reset_catch(target, false);
+               if (retval != ERROR_OK)
+                       LOG_WARNING("%s: Disabling Reset Catch debug event failed",
+                                       target_name(target));
+
                if (target->state != TARGET_HALTED) {
                        LOG_WARNING("%s: ran after reset and before halt ...",
                                target_name(target));
                        retval = target_halt(target);
+                       if (retval != ERROR_OK)
+                               return retval;
                }
        }
 
-       return retval;
+       return ERROR_OK;
 }
 
 static int aarch64_write_cpu_memory_slow(struct target *target,
@@ -2367,7 +2670,20 @@ static int aarch64_examine_first(struct target *target)
                aarch64->brp_list[i].BRPn = i;
        }
 
-       LOG_DEBUG("Configured %i hw breakpoints", aarch64->brp_num);
+       /* Setup Watchpoint Register Pairs */
+       aarch64->wp_num = (uint32_t)((debug >> 20) & 0x0F) + 1;
+       aarch64->wp_num_available = aarch64->wp_num;
+       aarch64->wp_list = calloc(aarch64->wp_num, sizeof(struct aarch64_brp));
+       for (i = 0; i < aarch64->wp_num; i++) {
+               aarch64->wp_list[i].used = 0;
+               aarch64->wp_list[i].type = BRP_NORMAL;
+               aarch64->wp_list[i].value = 0;
+               aarch64->wp_list[i].control = 0;
+               aarch64->wp_list[i].BRPn = i;
+       }
+
+       LOG_DEBUG("Configured %i hw breakpoints, %i watchpoints",
+               aarch64->brp_num, aarch64->wp_num);
 
        target->state = TARGET_UNKNOWN;
        target->debug_reason = DBG_REASON_NOTHALTED;
@@ -2504,8 +2820,13 @@ static int aarch64_jim_configure(struct target *target, Jim_GetOptInfo *goi)
         * options, JIM_OK if it correctly parsed the topmost option
         * and JIM_ERR if an error occurred during parameter evaluation.
         * For JIM_CONTINUE, we check our own params.
+        *
+        * adiv5_jim_configure() assumes 'private_config' to point to
+        * 'struct adiv5_private_config'. Override 'private_config'!
         */
+       target->private_config = &pc->adiv5_config;
        e = adiv5_jim_configure(target, goi);
+       target->private_config = pc;
        if (e != JIM_CONTINUE)
                return e;
 
@@ -2645,6 +2966,7 @@ COMMAND_HANDLER(aarch64_mask_interrupts_command)
 
 static int jim_mcrmrc(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
 {
+       struct command *c = jim_to_command(interp);
        struct command_context *context;
        struct target *target;
        struct arm *arm;
@@ -2652,7 +2974,7 @@ static int jim_mcrmrc(Jim_Interp *interp, int argc, Jim_Obj * const *argv)
        bool is_mcr = false;
        int arg_cnt = 0;
 
-       if (Jim_CompareStringImmediate(interp, argv[0], "mcr")) {
+       if (!strcmp(c->name, "mcr")) {
                is_mcr = true;
                arg_cnt = 7;
        } else {
@@ -2878,8 +3200,9 @@ struct target_type aarch64_target = {
        .add_context_breakpoint = aarch64_add_context_breakpoint,
        .add_hybrid_breakpoint = aarch64_add_hybrid_breakpoint,
        .remove_breakpoint = aarch64_remove_breakpoint,
-       .add_watchpoint = NULL,
-       .remove_watchpoint = NULL,
+       .add_watchpoint = aarch64_add_watchpoint,
+       .remove_watchpoint = aarch64_remove_watchpoint,
+       .hit_watchpoint = aarch64_hit_watchpoint,
 
        .commands = aarch64_command_handlers,
        .target_create = aarch64_target_create,

Linking to existing account procedure

If you already have an account and want to add another login method you MUST first sign in with your existing account and then change URL to read https://review.openocd.org/login/?link to get to this page again but this time it'll work for linking. Thank you.

SSH host keys fingerprints

1024 SHA256:YKx8b7u5ZWdcbp7/4AeXNaqElP49m6QrwfXaqQGJAOk gerrit-code-review@openocd.zylin.com (DSA)
384 SHA256:jHIbSQa4REvwCFG4cq5LBlBLxmxSqelQPem/EXIrxjk gerrit-code-review@openocd.org (ECDSA)
521 SHA256:UAOPYkU9Fjtcao0Ul/Rrlnj/OsQvt+pgdYSZ4jOYdgs gerrit-code-review@openocd.org (ECDSA)
256 SHA256:A13M5QlnozFOvTllybRZH6vm7iSt0XLxbA48yfc2yfY gerrit-code-review@openocd.org (ECDSA)
256 SHA256:spYMBqEYoAOtK7yZBrcwE8ZpYt6b68Cfh9yEVetvbXg gerrit-code-review@openocd.org (ED25519)
+--[ED25519 256]--+
|=..              |
|+o..   .         |
|*.o   . .        |
|+B . . .         |
|Bo. = o S        |
|Oo.+ + =         |
|oB=.* = . o      |
| =+=.+   + E     |
|. .=o   . o      |
+----[SHA256]-----+
2048 SHA256:0Onrb7/PHjpo6iVZ7xQX2riKN83FJ3KGU0TvI0TaFG4 gerrit-code-review@openocd.zylin.com (RSA)