David Brownell <david-b@pacbell.net>:

[openocd.git] / src / target / board / dm355evm.cfg

diff --git a/src/target/board/dm355evm.cfg b/src/target/board/dm355evm.cfg
index 6b633b883bf7f844f01f6d43b091285d1d59e112..9e6dc73ba5a60986378e73e68cb56fd010631f3f 100644 (file)
--- a/src/target/board/dm355evm.cfg
+++ b/src/target/board/dm355evm.cfg
@@ -105,7 +105,15 @@ proc dm355evm_init {} {
        # FIXME setup
 }
 
+# NAND -- socket has two chipselects, MT29F16G08FAA puts 1GByte on each one.
+#
+# NOTE:  "hwecc4" here presumes that if you're using the standard 2GB NAND
+# you either (a) have 'new' DM355 chips, with boot ROMs that don't need to
+# use "hwecc4_infix" for the UBL; or else (b) aren't updating anything that
+# needs infix layout ... like an old UBL, old U-Boot, old MVL kernel, etc.
+nand device davinci 0 0x02000000 hwecc4 0x01e10000
+nand device davinci 0 0x02004000 hwecc4 0x01e10000
+
 # FIXME
-#  - declare the NAND flash; use the 4-bit ECC
 #  - support writing UBL with its header (new layout only with new ROMs)
-#  - support writing ABL/U-Boot with its header (both layouts)
+#  - support writing ABL/U-Boot with its header (new layout)