struct jtag_tap *tap;
tap = etb->tap;
- if (tap == NULL)
+ if (!tap)
return ERROR_FAIL;
if (buf_get_u32(tap->cur_instr, 0, tap->ir_length) != new_instr) {
fields[0].in_value = NULL;
fields[1].num_bits = 7;
- uint8_t temp1;
+ uint8_t temp1 = 0;
fields[1].out_value = &temp1;
buf_set_u32(&temp1, 0, 7, 4);
fields[1].in_value = NULL;
fields[2].num_bits = 1;
- uint8_t temp2;
+ uint8_t temp2 = 0;
fields[2].out_value = &temp2;
buf_set_u32(&temp2, 0, 1, 0);
fields[2].in_value = NULL;
fields[0].check_mask = NULL;
fields[1].num_bits = 7;
- uint8_t temp1;
+ uint8_t temp1 = 0;
fields[1].out_value = &temp1;
buf_set_u32(&temp1, 0, 7, reg_addr);
fields[1].in_value = NULL;
fields[1].check_mask = NULL;
fields[2].num_bits = 1;
- uint8_t temp2;
+ uint8_t temp2 = 0;
fields[2].out_value = &temp2;
buf_set_u32(&temp2, 0, 1, 0);
fields[2].in_value = NULL;
fields[0].in_value = NULL;
fields[1].num_bits = 7;
- uint8_t temp1;
+ uint8_t temp1 = 0;
fields[1].out_value = &temp1;
buf_set_u32(&temp1, 0, 7, reg_addr);
fields[1].in_value = NULL;
fields[2].num_bits = 1;
- uint8_t temp2;
+ uint8_t temp2 = 0;
fields[2].out_value = &temp2;
buf_set_u32(&temp2, 0, 1, 1);
fields[2].in_value = NULL;
arm = target_to_arm(target);
if (!is_arm(arm)) {
- command_print(CMD_CTX, "ETB: '%s' isn't an ARM", CMD_ARGV[0]);
+ command_print(CMD, "ETB: '%s' isn't an ARM", CMD_ARGV[0]);
return ERROR_FAIL;
}
tap = jtag_tap_by_string(CMD_ARGV[1]);
- if (tap == NULL) {
- command_print(CMD_CTX, "ETB: TAP %s does not exist", CMD_ARGV[1]);
+ if (!tap) {
+ command_print(CMD, "ETB: TAP %s does not exist", CMD_ARGV[1]);
return ERROR_FAIL;
}
target = get_current_target(CMD_CTX);
arm = target_to_arm(target);
if (!is_arm(arm)) {
- command_print(CMD_CTX, "ETB: current target isn't an ARM");
+ command_print(CMD, "ETB: current target isn't an ARM");
return ERROR_FAIL;
}
etm = arm->etm;
if (!etm) {
- command_print(CMD_CTX, "ETB: target has no ETM configured");
+ command_print(CMD, "ETB: target has no ETM configured");
return ERROR_FAIL;
}
if (etm->capture_driver != &etb_capture_driver) {
- command_print(CMD_CTX, "ETB: target not using ETB");
+ command_print(CMD, "ETB: target not using ETB");
return ERROR_FAIL;
}
etb = arm->etm->capture_driver_priv;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], new_value);
if ((new_value < 2) || (new_value > 100))
- command_print(CMD_CTX,
+ command_print(CMD,
"valid percentages are 2%% to 100%%");
else
etb->trigger_percent = (unsigned) new_value;
}
- command_print(CMD_CTX, "%d percent of tracebuffer fills after trigger",
+ command_print(CMD, "%d percent of tracebuffer fills after trigger",
etb->trigger_percent);
return ERROR_OK;