Move TCL script files -- Step 2 of 2:

[openocd.git] / src / tcl / chip / atmel / at91 / rtt.tcl

diff --git a/src/tcl/chip/atmel/at91/rtt.tcl b/src/tcl/chip/atmel/at91/rtt.tcl
deleted file mode 100644 (file)
index 9c60300..0000000
--- a/src/tcl/chip/atmel/at91/rtt.tcl
+++ /dev/null
@@ -1,56 +0,0 @@
-
-set RTTC_RTMR [expr $AT91C_BASE_RTTC + 0x00]
-set RTTC_RTAR [expr $AT91C_BASE_RTTC + 0x04]
-set RTTC_RTVR [expr $AT91C_BASE_RTTC + 0x08]
-set RTTC_RTSR [expr $AT91C_BASE_RTTC + 0x0c]
-global RTTC_RTMR
-global RTTC_RTAR
-global RTTC_RTVR
-global RTTC_RTSR
-
-proc show_RTTC_RTMR_helper { NAME ADDR VAL } {
-    set rtpres [expr $VAL & 0x0ffff]
-    global BIT16 BIT17
-    if { $rtpres == 0 } {
-       set rtpres 65536;
-    } 
-    global AT91C_SLOWOSC_FREQ
-    # Nasty hack, make this a float by tacking a .0 on the end
-    # otherwise, jim makes the value an integer
-    set f [expr $AT91C_SLOWOSC_FREQ.0 / $rtpres.0]
-    puts [format "\tPrescale value: 0x%04x (%5d) => %f Hz" $rtpres $rtpres $f]
-    if { $VAL & $BIT16 } {
-       puts "\tBit16 -> Alarm IRQ Enabled"
-    } else {
-       puts "\tBit16 -> Alarm IRQ Disabled"
-    }
-    if { $VAL & $BIT17 } {
-       puts "\tBit17 -> RTC Inc IRQ Enabled"
-    } else {
-       puts "\tBit17 -> RTC Inc IRQ Disabled"
-    }
-    # Bit 18 is write only.
-}
-
-proc show_RTTC_RTSR_helper { NAME ADDR VAL } {
-    global BIT0 BIT1
-    if { $VAL & $BIT0 } {
-       puts "\tBit0 -> ALARM PENDING"
-    } else {
-       puts "\tBit0 -> alarm not pending"
-    }
-    if { $VAL & $BIT1 } {
-       puts "\tBit0 -> RTINC PENDING"
-    } else {
-       puts "\tBit0 -> rtinc not pending"
-    }
-}
-
-proc show_RTTC { } {
-    
-    show_mmr32_reg RTTC_RTMR
-    show_mmr32_reg RTTC_RTAR
-    show_mmr32_reg RTTC_RTVR
-    show_mmr32_reg RTTC_RTSR
-}
-