target.cfg: (re)move some bogus reset_config lines

[openocd.git] / tcl / target / at91r40008.cfg

diff --git a/tcl/target/at91r40008.cfg b/tcl/target/at91r40008.cfg
index f8f5d410600643da8b76c10e66bdb457e74e68b2..e8710f7f3859417544f96317d01e6e34a4b3e32c 100644 (file)
--- a/tcl/target/at91r40008.cfg
+++ b/tcl/target/at91r40008.cfg
@@ -1,14 +1,14 @@
 
 
-if { [info exists CHIPNAME] } {        
-   set  _CHIPNAME $CHIPNAME    
-} else {        
+if { [info exists CHIPNAME] } {
+   set  _CHIPNAME $CHIPNAME
+} else {
    set  _CHIPNAME at9r40008
 }
 
-if { [info exists ENDIAN] } {  
-   set  _ENDIAN $ENDIAN    
-} else {        
+if { [info exists ENDIAN] } {
+   set  _ENDIAN $ENDIAN
+} else {
    set  _ENDIAN little
 }
 
@@ -28,7 +28,8 @@ reset_config srst_only srst_pulls_trst
 #jtag scan chain
 #format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
-set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+
+set _TARGETNAME $_CHIPNAME.cpu
 target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
 
 
@@ -42,9 +43,9 @@ $_TARGETNAME configure -event gdb-flash-erase-start {
        mww 0xffe00020 0x00000001
 }
 
-$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0
+$_TARGETNAME configure -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0
 
-flash bank cfi 0x10000000 0x400000 2 2 0
+flash bank cfi 0x10000000 0x400000 2 2 $_TARGETNAME
 
 # For more information about the configuration files, take a look at:
 # openocd.texi