Get rid of needless OMAP and Davinci target config options

[openocd.git] / tcl / target / ti_dm365.cfg

diff --git a/tcl/target/ti_dm365.cfg b/tcl/target/ti_dm365.cfg
index 4f22ea27dd05b05d672dd7433872e6c15b43cd7e..3a17d1a8be77d9f2b4372268ea21fc087448e747 100644 (file)
--- a/tcl/target/ti_dm365.cfg
+++ b/tcl/target/ti_dm365.cfg
@@ -24,8 +24,7 @@ if { [info exists ETB_TAPID ] } {
 } else {
    set _ETB_TAPID 0x2b900f0f
 }
-jtag newtap $_CHIPNAME etb -irlen 4 -ircapture 0x1 -irmask 0xf \
-       -expected-id $_ETB_TAPID $EMU01
+jtag newtap $_CHIPNAME etb -irlen 4 -irmask 0xf -expected-id $_ETB_TAPID $EMU01
 jtag configure $_CHIPNAME.etb -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 1"
 
@@ -35,8 +34,7 @@ if { [info exists CPU_TAPID ] } {
 } else {
    set _CPU_TAPID 0x0792602f
 }
-jtag newtap $_CHIPNAME arm -irlen 4 -ircapture 0x1 -irmask 0xf \
-       -expected-id $_CPU_TAPID $EMU01
+jtag newtap $_CHIPNAME arm -irlen 4 -irmask 0xf -expected-id $_CPU_TAPID $EMU01
 jtag configure $_CHIPNAME.arm -event tap-enable \
        "icepick_c_tapenable $_CHIPNAME.jrc 0"
 
@@ -46,8 +44,7 @@ if { [info exists JRC_TAPID ] } {
 } else {
    set _JRC_TAPID 0x0b83e02f
 }
-jtag newtap $_CHIPNAME jrc -irlen 6 -ircapture 0x1 -irmask 0x3f \
-       -expected-id $_JRC_TAPID
+jtag newtap $_CHIPNAME jrc -irlen 6 -irmask 0x3f -expected-id $_JRC_TAPID
 
 ################
 
@@ -88,6 +85,12 @@ $_TARGETNAME configure \
        -work-area-size 0x4000 \
        -work-area-backup 0
 
+# be absolutely certain the JTAG clock will work with the worst-case
+# CLKIN = 19.2 MHz (best case: 36 MHz) even when no bootloader turns
+# on the PLL and starts using it.  OK to speed up after clock setup.
+jtag_rclk 1500
+$_TARGETNAME configure -event "reset-start" { jtag_rclk 1500 }
+
 arm7_9 fast_memory_access enable
 arm7_9 dcc_downloads enable