-#daemon configuration\r
-telnet_port 4444\r
-gdb_port 3333\r
-\r
-# tell gdb our flash memory map\r
-# and enable flash programming\r
-gdb_memory_map enable\r
-gdb_flash_program enable\r
-\r
-#interface\r
-interface ft2232\r
-ft2232_device_desc "Amontec JTAGkey A"\r
-ft2232_layout jtagkey\r
-ft2232_vid_pid 0x0403 0xcff8\r
-jtag_speed 1\r
-\r
-jtag_nsrst_delay 100\r
-jtag_ntrst_delay 100\r
-\r
-#use combined on interfaces or targets that can't set TRST/SRST separately\r
-reset_config trst_and_srst\r
-\r
-#jtag scan chain\r
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)\r
-jtag_device 8 0x1 0x1 0xfe\r
-jtag_device 4 0x1 0xf 0xe\r
-jtag_device 5 0x1 0x1 0x1e\r
-\r
-#target configuration\r
-daemon_startup reset\r
-\r
-#target <type> <startup mode>\r
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>\r
-target arm966e little reset_halt 1 arm966e\r
-run_and_halt_time 0 30\r
-\r
-target_script 0 gdb_program_config .\prj\str912_program.script\r
-\r
-working_area 0 0x50000000 16384 nobackup\r
-\r
-#flash bank str7x <base> <size> 0 0 <target#> <variant>\r
-flash bank str9x 0x00000000 0x00080000 0 0 0\r
-\r
-# For more information about the configuration files, take a look at:\r
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger\r
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 1
+
+jtag_nsrst_delay 100
+jtag_ntrst_delay 100
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst
+
+#jtag scan chain
+jtag newtap str9 flash -irlen 8
+jtag newtap str9 cpu -irlen 4 -irmask 0xf
+jtag newtap str9 bs -irlen 5
+
+#target configuration
+target create target0 arm966e -endian little -chain-position 1
+[new_target_name] configure -work-area-virt 0 -work-area-phys 0x50000000 -work-area-size 16384 -work-area-backup false
+
+target_script 0 gdb_program_config .\prj\str912_program.script
+
+#flash bank str7x <base> <size> 0 0 <target#> <variant>
+flash bank str9x 0x00000000 0x00080000 0 0 0
+
+# For more information about the configuration files,
+# look at the OpenOCD User's Guide.
+
+init
+reset halt