X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;ds=sidebyside;f=src%2Ftcl%2Ftarget%2Fat91r40008.cfg;fp=src%2Ftcl%2Ftarget%2Fat91r40008.cfg;h=f8f5d410600643da8b76c10e66bdb457e74e68b2;hb=140d6c8e7948710a764965075bfaa700efd09802;hp=0000000000000000000000000000000000000000;hpb=7c0e823d0a57df99adc5b1b7975406bfd9e0d9fb;p=openocd.git

diff --git a/src/tcl/target/at91r40008.cfg b/src/tcl/target/at91r40008.cfg
new file mode 100644
index 0000000000..f8f5d41060
--- /dev/null
+++ b/src/tcl/target/at91r40008.cfg
@@ -0,0 +1,50 @@
+
+
+if { [info exists CHIPNAME] } {	
+   set  _CHIPNAME $CHIPNAME    
+} else {	 
+   set  _CHIPNAME at9r40008
+}
+
+if { [info exists ENDIAN] } {	
+   set  _ENDIAN $ENDIAN    
+} else {	 
+   set  _ENDIAN little
+}
+
+if { [info exists CPUTAPID ] } {
+   set _CPUTAPID $CPUTAPID
+} else {
+  # force an error till we get a good number
+   set _CPUTAPID 0xffffffff
+}
+
+jtag_nsrst_delay 200
+jtag_ntrst_delay 200
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config srst_only srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
+set _TARGETNAME [format "%s.cpu" $_CHIPNAME]
+target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi
+
+
+$_TARGETNAME configure -event gdb-flash-erase-start {
+	wait_halt
+	sleep 10
+	poll
+	# Ethernut 3 remapping is required to access external flash memory.
+	mww 0xffe00000 0x1000213d
+	mww 0xffe00004 0x20003e3d
+	mww 0xffe00020 0x00000001
+}
+
+$_TARGETNAME configure -work-area-virt 0 -work-area-phys 0x3C000 -work-area-size 0x4000 -work-area-backup 0
+
+flash bank cfi 0x10000000 0x400000 2 2 0
+
+# For more information about the configuration files, take a look at:
+# openocd.texi