X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;ds=sidebyside;f=tcl%2Ftarget%2Fimx53.cfg;h=5ad6473a8ef890fc44107bf9b13575d404e3b359;hb=38030e011542a894237b517c065d22db97525954;hp=7194783e579eee86a876ff7b8d8a2a7dd237a99f;hpb=ca45e700b1c57caca2ef08e665e3c7e3e02ac8d3;p=openocd.git

diff --git a/tcl/target/imx53.cfg b/tcl/target/imx53.cfg
index 7194783e57..5ad6473a8e 100644
--- a/tcl/target/imx53.cfg
+++ b/tcl/target/imx53.cfg
@@ -31,21 +31,14 @@ jtag newtap $_CHIPNAME SJC -irlen 5 -ircapture 0x1 -irmask 0x1f \
 
 # GDB target: Cortex-A8, using DAP
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME cortex_a8 -chain-position $_CHIPNAME.DAP
+target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.DAP
 
 # some TCK tycles are required to activate the DEBUG power domain
 jtag configure $_CHIPNAME.SJC -event post-reset "runtest 100"
 
-# have the DAP "always" be active
-jtag configure $_CHIPNAME.SJC -event setup "jtag tapenable $_CHIPNAME.DAP"
-
 proc imx53_dbginit {target} {
-     # General Cortex A8 debug initialisation
-     cortex_a8 dbginit
+     # General Cortex-A8 debug initialisation
+     cortex_a dbginit
 }
 
-# Slow speed to be sure it will work
-jtag_rclk 1000
-$_TARGETNAME configure -event "reset-start" { jtag_rclk 1000 }
-
 $_TARGETNAME configure -event reset-assert-post "imx53_dbginit $_TARGETNAME"