X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;ds=sidebyside;f=tcl%2Ftarget%2Flpc2129.cfg;h=2587bf725a5682af2f27e6194a3045f243f4684d;hb=4bd2b30d5bae59b751f8eb30815cf330faae2a6f;hp=287fa5d06b5a121de3bc7066a9b5a87bf9d913a1;hpb=2dfa5e9c844a5a3f8aaca146c874f13570b8f667;p=openocd.git

diff --git a/tcl/target/lpc2129.cfg b/tcl/target/lpc2129.cfg
index 287fa5d06b..2587bf725a 100644
--- a/tcl/target/lpc2129.cfg
+++ b/tcl/target/lpc2129.cfg
@@ -1,5 +1,4 @@
-#LPC-2129 CPU
-
+# NXP LPC2129
 
 if { [info exists CHIPNAME] } {
    set  _CHIPNAME $CHIPNAME
@@ -7,36 +6,26 @@ if { [info exists CHIPNAME] } {
    set  _CHIPNAME lpc2129
 }
 
-if { [info exists ENDIAN] } {
-   set  _ENDIAN $ENDIAN
-} else {
-   set  _ENDIAN little
-}
-
 if { [info exists CPUTAPID ] } {
    set _CPUTAPID $CPUTAPID
 } else {
-  # force an error till we get a good number
-   set _CPUTAPID 0xffffffff
+   set _CPUTAPID 0xcf1f0f0f
 }
 
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
+reset_config trst_and_srst
 
 # reset delays
-jtag_nsrst_delay 100
+adapter_nsrst_delay 100
 jtag_ntrst_delay 100
 
 #jtag scan chain
 jtag newtap $_CHIPNAME cpu -irlen 4 -ircapture 0x1 -irmask 0xf -expected-id $_CPUTAPID
 
-
 set _TARGETNAME $_CHIPNAME.cpu
-target create $_TARGETNAME arm7tdmi -endian $_ENDIAN -chain-position $_TARGETNAME -variant arm7tdmi-s_r4
+target create $_TARGETNAME arm7tdmi -chain-position $_TARGETNAME
 
 $_TARGETNAME configure -work-area-phys 0x40000000 -work-area-size 0x4000 -work-area-backup 0
 
-#flash bank <driver> <base> <size> <chip_width> <bus_width>
+# flash bank <name> lpc2000 <base> <size> 0 0 <target#> <variant> <clock> [calc checksum]
 set _FLASHNAME $_CHIPNAME.flash
 flash bank $_FLASHNAME lpc2000 0x0 0x40000 0 0 $_TARGETNAME lpc2000_v1 14765 calc_checksum