X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;ds=sidebyside;f=testing%2Fexamples%2FLPC2294Test%2Fprj%2Flpc2294_jtagkey.cfg;h=d2dfd45f9bf55d60ce9788335cf6eee39a76236d;hb=e2b6de3d66bae70cb08fea17f5b66ee875dbb636;hp=9d975099c7c0f50c7aaa20322985f47537a342f3;hpb=44ab4ec6cebcfb6a552c752a08123f8379d0cc05;p=openocd.git

diff --git a/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg b/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg
index 9d975099c7..d2dfd45f9b 100644
--- a/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg
+++ b/testing/examples/LPC2294Test/prj/lpc2294_jtagkey.cfg
@@ -1,39 +1,38 @@
-#daemon configuration
-telnet_port 4444
-gdb_port 3333
-
-# tell gdb our flash memory map
-# and enable flash programming
-gdb_memory_map enable
-gdb_flash_program enable
-
-#interface
-interface ft2232
-ft2232_device_desc "Amontec JTAGkey A"
-ft2232_layout jtagkey
-ft2232_vid_pid 0x0403 0xcff8
-jtag_speed 3
-
-#use combined on interfaces or targets that can't set TRST/SRST separately
-reset_config trst_and_srst srst_pulls_trst
-
-#jtag scan chain
-#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
-jtag_device 4 0x1 0xf 0xe
-
-#target configuration
-daemon_startup reset
-
-#target <type> <startup mode>
-#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
-target arm7tdmi little run_and_halt 0 arm7tdmi-s_r4
-run_and_halt_time 0 30
-
-working_area 0 0x40000000 0x4000 nobackup
-
-#flash configuration
-#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
-flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
-
-# For more information about the configuration files, take a look at:
-# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger
+#daemon configuration
+telnet_port 4444
+gdb_port 3333
+
+# tell gdb our flash memory map
+# and enable flash programming
+gdb_memory_map enable
+gdb_flash_program enable
+
+#interface
+interface ft2232
+ft2232_device_desc "Amontec JTAGkey A"
+ft2232_layout jtagkey
+ft2232_vid_pid 0x0403 0xcff8
+jtag_speed 3
+
+#use combined on interfaces or targets that can't set TRST/SRST separately
+reset_config trst_and_srst srst_pulls_trst
+
+#jtag scan chain
+#format L IRC IRCM IDCODE (Length, IR Capture, IR Capture Mask, IDCODE)
+jtag_device 4 0x1 0xf 0xe
+
+#target configuration
+daemon_startup reset
+
+#target <type> <startup mode>
+#target arm7tdmi <reset mode> <chainpos> <endianness> <variant>
+target arm7tdmi little 0 arm7tdmi-s_r4
+
+working_area 0 0x40000000 0x4000 nobackup
+
+#flash configuration
+#flash bank lpc2000 <base> <size> 0 0 <target#> <variant>
+flash bank lpc2000 0x0 0x40000 0 0 0 lpc2000_v1 14765 calc_checksum
+
+# For more information about the configuration files, take a look at:
+# http://openfacts.berlios.de/index-en.phtml?title=Open+On-Chip+Debugger