X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=NEWS;h=208146a4600fe6292d512146438b427accced1c4;hb=9ea7f3d647c8ecf6b0f1424002dfc3f4504a162c;hp=2c86629582c186b5a1306575c4b4208d03ecdd4b;hpb=9e5a6679cac36667e51f24a6bd5670396cd06ed6;p=openocd.git diff --git a/NEWS b/NEWS index 2c86629582..208146a460 100644 --- a/NEWS +++ b/NEWS @@ -1,5 +1,132 @@ +This file includes highlights of the changes made in the OpenOCD +source archive release. -2008-01-21 : - xscale big-endian branch closed and all changes moved to - trunk. +JTAG Layer: + * add default to adapter speed when unspecified (100 kHz) + * AM335X gpio (BeagleBones) adapter driver + * BCM2835 support for SWD + * Cadence Virtual Debug (vdebug) adapter driver + * CMSIS-DAP support for SWO and SWD multidrop + * Espressif USB JTAG Programmer adapter driver + * Remote bitbang support for Windows host + * ST-LINK add TCP server support to adapter driver + * SWD multidrop support +Boundary Scan: + +Target Layer: + * aarch64: support watchpoints + * arm: support independent TPIU and SWO for trace + * arm adi v5: support Large Physical Address Extension + * arm adi v6: support added, for jtag and swd transport + * cortex_a: support watchpoints + * elf 64bit load support + * Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores + * semihosting: support user defined operations + * Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP + +Flash Layer: + * Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support + * GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support + * Nuvoton NPCX series support + * onsemi RSL10 support + * Raspberry Pi Pico RP2040 support + * ST BlueNRG-LPS support + * ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support + * ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support + +Board, Target, and Interface Configuration Scripts: + * Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config + * Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config + * Digilent Nexys Video board config + * Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config + * Espressif ESP32 via ESP USB Bridge generic board config + * Espressif ESP32-S2 Kaluga 1 board config + * Espressif ESP32-S2 with ESP USB Bridge board config + * Espressif ESP32-S3 example board config + * Kontron SMARC-sAL28 board config + * LambdaConcept ECPIX-5 board config + * Microchip ATSAMA5D27-SOM1-EK1 board config + * Microchip EVB-LAN9255 board config + * Microchip SAME51 Curiosity Nano board config + * NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config + * NXP RT6XX board config + * Olimex H405 board config + * Radiona ULX3S board config + * Raspberry Pi 3 and Raspberry Pi 4 model B board config + * Raspberry Pi Pico-Debug board config + * Renesas R-Car V3U Falcon board config + * ST BlueNRG-LPS steval-idb012v1 board config + * ST NUCLEO-8S208RB board config + * ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config + * ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config + * ST STM32MP13x-DK board config + * TI AM625 EVM, AM642 EVM and AM654 EVM board config + * TI J721E EVM, J721S2 EVM and J7200 EVM board config + * Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config + * Cadence Xtensa generic and Xtensa VDebug target config + * Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config + * Espressif ESP32, ESP32-S2 and ESP32-S3 target config + * Microchip ATSAMA5D2 series target config + * NanoXplore NG-Ultra SoC target config + * NXP IMX8QM target config + * NXP LS1028A, LS1046A and LS1088A target config + * NXP RT600 (Xtensa HiFi DSP) target config + * onsemi RSL10 target config + * Raspberry Pi Pico RP2040 target config + * Renesas R8A779A0 V3U target config + * Renesas RZ/Five target config + * Renesas RZ/G2 MPU family target config + * Rockchip RK3399 target config + * ST BlueNRG-LPS target config + * ST STM32MP13x target config + * TI AM625, AM654, J721E and J721S2 target config + * Ashling Opella-LD interface config + * Aspeed AST2600 linuxgpiod based interface config + * Blinkinlabs JTAG_Hat interface config + * Cadence Virtual Debug (vdebug) interface config + * Espressif ESP32-S2 Kaluga 1 board's interface config + * Espressif USB Bridge jtag interface config + * Infineon DAP miniWiggler V3 interface config + * PLS SPC5 interface config + * Tigard interface config + * Lattice MachXO3 family FPGA config + +Server Layer: + * GDB: add per-target remote protocol extensions + * GDB: more 'Z' packets support + * IPDBG JtagHost server functionality + * semihosting: I/O redirection to TCP server + * telnet: support for command's autocomplete + +RTOS: + * 'none' rtos support + * Zephyr rtos support + +Documentation: + +Build and Release: + * Add json extension to jimtcl build + * Drop dependency from libusb0 + * Drop repository repo.or.cz for submodules + * Move gerrit to https://review.openocd.org/ + * Require autoconf 2.69 or newer + * Update jep106 to revision JEP106BF.01 + * Update jimtcl to version 0.81 + * Update libjaylink to version 0.3.1 + * New configure flag '--enable-jimtcl-maintainer' for jimtcl build + + +This release also contains a number of other important functional and +cosmetic bugfixes. For more details about what has changed since the +last release, see the git repository history: + +http://sourceforge.net/p/openocd/code/ci/v0.12.0/log/?path= + + +For older NEWS, see the NEWS files associated with each release +(i.e. NEWS-). + +For more information about contributing test reports, bug fixes, or new +features and device support, please read the new Developer Manual (or +the BUGS and PATCHES.txt files in the source archive).