X-Git-Url: https://review.openocd.org/gitweb?a=blobdiff_plain;f=NEWS;h=50cb9843971be5b588dc463c6cba9b76523a2628;hb=c4f88aeb4d1f88f908f96ba252995c5ba247b737;hp=6620bc69a0d2bb8e73a1b7ae44eb2b3d4d703548;hpb=2e0023569f97fab22d0d087b8a79307ba2280709;p=openocd.git diff --git a/NEWS b/NEWS index 6620bc69a0..50cb984397 100644 --- a/NEWS +++ b/NEWS @@ -2,103 +2,126 @@ This file includes highlights of the changes made in the OpenOCD source archive release. JTAG Layer: - * SWD support with FTDI, Versaloon, J-Link, sysfsgpio - * CMSIS-DAP massive speed and stability improvements - * Versaloon driver ported to libusb-1.0 - * STLink can reestablish communication with a target that was - disconnected or rebooted - * STLink FAULT and WAIT SWD handling improved - * New hla_serial command to distinguish between several HLA - adapters attached to a single machine - * Serial number support for CMSIS-DAP and J-Link adapters - * Support for more J-Link adapters - * TAP autoprobing improvements - * Big speedup for SVF playback with USB Blaster + * add default to adapter speed when unspecified (100 kHz) + * AM335X gpio (BeagleBones) adapter driver + * BCM2835 support for SWD + * Cadence Virtual Debug (vdebug) adapter driver + * CMSIS-DAP support for SWO and SWD multidrop + * Espressif USB JTAG Programmer adapter driver + * Remote bitbang support for Windows host + * ST-LINK add TCP server support to adapter driver + * SWD multidrop support Boundary Scan: Target Layer: - * Stability improvements for targets that get disconnected or - rebooted during a debug session - * MIPS speed and reliability improvements - * MIPS 1.5/2.0 fixes - * ARMv7-R improvements - * Cortex-A improvements, A7, A15 MPCores support - * FPU support for ARMv7-M (Cortex-M4F) - * TPIU/ITM support (including SWO/SWV tracing), can be - captured with external tools or STLink - * JTAG Serial Port (Advanced Debug System softcore) support - * Profiling support for OpenRISC - * ChibiOS/RT 3.0 support (with and without FPU) - * FreeRTOS current versions support - * Freescale MQX RTOS support - * GDB target description support for MIPS - * The last created target is auto-selected as the current + * aarch64: support watchpoints + * arm: support independent TPIU and SWO for trace + * arm adi v5: support Large Physical Address Extension + * arm adi v6: support added, for jtag and swd transport + * cortex_a: support watchpoints + * elf 64bit load support + * Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores + * semihosting: support user defined operations + * Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP Flash Layer: - * nRF51 async loader to improve flashing performance and stability - * Cypress PSoC 41xx/42xx family flash driver - * Silabs SiM3 family flash driver - * Marvell Wireless Microcontroller SPI flash driver - * Kinetis mass erase (part unsecuring) implemented - * lpcspifi stability fixes - * STM32 family sync with reference manuals, L0 support, bugfixes - * LPC2000 driver automatically determines part and flash size - * NXP LPC11(x)xx, LPC13xx, LPC15xx, LPC8xx, LPC5410x, LPC407x support - * Atmel SAMD, SAMR, SAML21 devices support - * Atmel SAM4E16 support - * ZeroGecko family support - * TI Tiva C Blizzard and Snowflake families support - * Nuvoton NuMicro M051 support + * Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support + * GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support + * Nuvoton NPCX series support + * onsemi RSL10 support + * Raspberry Pi Pico RP2040 support + * ST BlueNRG-LPS support + * ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support + * ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support Board, Target, and Interface Configuration Scripts: - * Normal target configs can work with HLA (STLink, ICDI) adapters - * STM32 discovery and Nucleo boards configs - * Gumstix AeroCore board config - * General Plus GP326XXXA target config - * Micrel KS869x target config - * ASUS RT-N66U board config - * Atmel SAM4E-EK board config - * Atmel AT91SAM4L proper reset handling implemented - * TI OMAP/AM 3505, 3517 target configs - * nRF51822-mKIT board config - * RC Module К1879ХБ1Я target config - * TI TMDX570LS20SUSB board config - * TI TMS570 USB Kit board config - * TI CC2538, CC26xx target configs - * TI AM437x major config improvements, DDR support - * TI AM437X IDK board config - * TI SimpleLink Wi-Fi CC3200 LaunchPad configs - * Silicon Labs EM357, EM358 target configs - * Infineon XMC1000, XMC4000 family targets and boards configs - * Atheros AR9331 target config - * TP-LINK TL-MR3020 board config - * Alphascale asm9260t target and eval kit configs - * Olimex SAM7-LA2 (AT91SAM7A2) board config - * EFM32 Gecko boards configs - * Spansion FM4 target and SK-FM4-176L-S6E2CC board configs - * LPC1xxx target configs were restructured - * IoT-LAB debug adapter config - * DP BusBlaster KT-Link compatible config + * Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max ("Mystique") board config + * Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board config + * Digilent Nexys Video board config + * Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config + * Espressif ESP32 via ESP USB Bridge generic board config + * Espressif ESP32-S2 Kaluga 1 board config + * Espressif ESP32-S2 with ESP USB Bridge board config + * Espressif ESP32-S3 example board config + * Kontron SMARC-sAL28 board config + * LambdaConcept ECPIX-5 board config + * Microchip ATSAMA5D27-SOM1-EK1 board config + * Microchip EVB-LAN9255 board config + * Microchip SAME51 Curiosity Nano board config + * NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config + * NXP RT6XX board config + * Olimex H405 board config + * Radiona ULX3S board config + * Raspberry Pi 3 and Raspberry Pi 4 model B board config + * Raspberry Pi Pico-Debug board config + * Renesas R-Car V3U Falcon board config + * ST BlueNRG-LPS steval-idb012v1 board config + * ST NUCLEO-8S208RB board config + * ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config + * ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config + * ST STM32MP13x-DK board config + * TI AM625 EVM, AM642 EVM and AM654 EVM board config + * TI J721E EVM, J721S2 EVM and J7200 EVM board config + * Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max ("Mystique") target config + * Cadence Xtensa generic and Xtensa VDebug target config + * Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config + * Espressif ESP32, ESP32-S2 and ESP32-S3 target config + * Microchip ATSAMA5D2 series target config + * NanoXplore NG-Ultra SoC target config + * NXP IMX8QM target config + * NXP LS1028A, LS1046A and LS1088A target config + * NXP RT600 (Xtensa HiFi DSP) target config + * onsemi RSL10 target config + * Raspberry Pi Pico RP2040 target config + * Renesas R8A779A0 V3U target config + * Renesas RZ/Five target config + * Renesas RZ/G2 MPU family target config + * Rockchip RK3399 target config + * ST BlueNRG-LPS target config + * ST STM32MP13x target config + * TI AM625, AM654, J721E and J721S2 target config + * Ashling Opella-LD interface config + * Aspeed AST2600 linuxgpiod based interface config + * Blinkinlabs JTAG_Hat interface config + * Cadence Virtual Debug (vdebug) interface config + * Espressif ESP32-S2 Kaluga 1 board's interface config + * Espressif USB Bridge jtag interface config + * Infineon DAP miniWiggler V3 interface config + * PLS SPC5 interface config + * Tigard interface config + * Lattice MachXO3 family FPGA config Server Layer: - * Polling period can be configured - * "shutdown" command has an immediate effect - * The "program" command doesn't lead to a shutdown by - default, use optional "exit" parameter for the old behaviour - * Proper OS signal handling was implemented - * Async target notifications for the Tcl RPC + * GDB: add per-target remote protocol extensions + * GDB: more 'Z' packets support + * IPDBG JtagHost server functionality + * semihosting: I/O redirection to TCP server + * telnet: support for command's autocomplete + +RTOS: + * 'none' rtos support + * Zephyr rtos support Documentation: Build and Release: + * Add json extension to jimtcl build + * Drop dependency from libusb0 + * Drop repository repo.or.cz for submodules + * Move gerrit to https://review.openocd.org/ + * Require autoconf 2.69 or newer + * Update jep106 to revision JEP106BE + * Update jimtcl to version 0.81 + * Update libjaylink to version 0.3.1 + * New configure flag '--enable-jimtcl-maintainer' for jimtcl build This release also contains a number of other important functional and cosmetic bugfixes. For more details about what has changed since the last release, see the git repository history: -http://sourceforge.net/p/openocd/code/ci/v0.9.0-rc1/log/?path= +http://sourceforge.net/p/openocd/code/ci/v0.12.0-rc1/log/?path= For older NEWS, see the NEWS files associated with each release